Effect of creating DTP in production

Hello
What are the effects of creating DTP ees in production.
Please advise.

Kishan,
You can create directly in production. But it is not advisable. if anything goes wrong that will distrub your live data targets. It is a risky job. Better than that is creat the DTPs in dev system test it in dev system itself. if it fails no issues as it is the development system.
Thanks
K
Edited by: kirankumar chandaluri on Jan 10, 2008 4:55 PM

Similar Messages

Creating DTP in Production

Hi,
I am trying to create a DTP in Production but, I am getting the following message.
"Changes to Repository or cross-client Customizing are not permitted"
In prod I have authorisation to Maintain, save and create authorisation. Can some one explian if we are allowed to create DTPs' in production in BI 7.0 or is there any settings need to be done by BASIS.
Many Thanks,
Ravi Kumar

yes you can.
DTP's are like infopackages.
Here are the steps to make this setting in QA & Prod:
RSA1> Transport Connection > Object Changeability > DTPA --> Everything Changeable

When using Adobe Photoshop Elements, is it legal to use shapes etc. (displayed in 'Artwork and Effects') when creating a product to be sold? Thank you.

When using Adobe Photoshop Elements, is it legal to use shapes etc. (displayed in 'Artwork and Effects') when creating a product to be sold? Thank you.

Thank you very much for answering my question. Have a great day.

Error while creating DTP from DS to Infoobject

Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
Satya

Hi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose.

How can we create Versions for Products in SAP CRM

Hi All,
We want use Product Versions in our CRM IC Webclient. We want to be able to select a product and then have a list of versions to pick from. Can anyone tell me if they have configured Versions for Products in their SAP CRM system. If yes, then how did you go about it.
Thanks,
Ramesh Nallabelli

Hi Arup and Shanthala,
Thanks for the prompt responses. Appreciate your help. We want to create Product versions like this: Product: Windows OS Version: 95, 98, XP, Vista, 7, etc.
When I try to create a configurable product, using the Configuration tab, to create or use a product model I see an error message: PME installation with errors The long text is: The environment variable PME_HOME that includes the PME application has to exist locally in order to start the PME from CRM.
This indicates the configuration of IPC in our CRM system. This is something that we have not undertaken so far.
When I use the Poduct Variants tab to create a product variant for a configurable product, I can't edit here. This view opens in a display only mode. After reading some more about this, It looks like variant configuration needs to be used in tandem with ERP variant configuration. There might also be a need to recreate this in the Java configuration engine. We are going to create these products in CRM only, so this might not work for us.
Regards,
Ramesh

How to stop the prodution order creating when the product is not valued?

Hi guyes:
How to stop the prodution order creating when the product is not valued using CO01?
I hope that when i create the production order,the system will check the product is valued or not,if not
the system will show an error or warning message!
How to config for this?
Thank you!

Dear Zhao Gang,
Check with this user Exits mentioned in this link,
Prevent Production Order from "Release" if there is no Cost Estimate
Re: User Exit at Production Order Release
Check and revert back.
Regards
Mangalraj.S

Webapp (requires payment) creating multiple/duplicate products

Each time someone submits a new Webapp that requires payment, a new Ecommerce product is created. Is there a way to have the Webapp use the same product? I also have an online shop, and it's making the product management overwhelming.

I have tested all sorts workarounds for this problem. My situation was that we had a single payment webform set up and we were using this same form to accept payment for multiple events (the web form HTML code was inserted into the event detail and used to submit the event booking).
Here's what was happening:
A product was automatically created by Business Catalyst. Product code is the WebFormID of the webform used to submit the order. Product name is a concatenation of {web form name}/{event name}
An order was created in the CRM referencing the new product.
BC will create a new product when an order is placed unless the combination of Product Code + Product Name already exists. This is patently stupid since the Product Code is the primary key here. In fact, BC even warns you that this is bad as soon as you view the product page in admin.
I searched everywhere I could think of to find a way to tell the web form which product to use when creating the order. No joy. There does not seem to be a way to override the automatic creation algorithm. I posted a question about this in the forum here and never got a response.
As Shannon points out, these ARE real products as far as the database, OneSaas etc are concerned. We use OneSaas to synchronise to Saasu and this synchronisation process repeatedly failed due to missing product codes in Saasu (which is the product master by the way).
So, the only solution I could find was to duplicate our payment WebForm so that there is a unique and distinct form for every event our customers could purchase. I then modified each event so that it used the corresponding WebFormID of it's dedicated WebForm in the action URL query parameters. I didn't need to modify anything else in the event (since every webform is exactly the same - the HTML is identical. Hooray for code re-use ... NOT!).
In Saasu, I then create an Item to represent each event booking using the WebFormID as the Item code. There's no need to run around and create the products on BC. It will create diabolical looking product names using the WebFormID and if you create these manually you NEED to make sure that the name you enter is EXACTLY as BC will create it ... or you'll get a duplicate product ... again.
OneSaas now works correctly as we have it set up to pull in products from Saasu. It can pick up the new orders and relate these to Saasu products/items and then sync the invoices to Saasu.
Problems With This Approach
Your WebForm code is duplicated across multiple events. If you want to, say, change the payment methods that you accept you'll need to change each and every webform as well as modify the HTML code in the event.
You get a unique product for every event that you offer. This may not be what you want (my client didn't). At least it will synchronise.
You MUST remember to create products in Saasu any time you offer a new event. At least you can use a sensible Item name in Saaus (rather than the auto-created BC garbage) as matching is only done on the code.
If you have an external process that extracts Items from Saasu so that you can create matching products in BC you'll need to be careful not to overwrite the product names for your webform related products. Or you'll get a duplicate product created on the next order.
If anyone has a better approach I'd be happy to hear it.

How to create a service product with a condition record?

Hi all
I'm quite new to CRM programming and I now need to create a service product with a condition record. For creating the product I use function COM_PROD_SERVICE_MAINTAIN_API and it creates a product propperly. The function offers parameter IT_CONDITIONS for creating conditions. But when you have a look at type COM_PRODUCT_CND_API_TAB of the parameter, then you will find a deeep tabletype with lots(!) of additional tables. In the conditions tab of the product I simply enter a Condition Type, a Sales Organization, a Distribution Channel, an Amount, a Currency and a Unit and everything is fine after saving.
Can anyone of you help me in how to set up parameter IT_CONDITIONS to get the above values into the product?
Thanks fou you help,
Michael Drechsler

Hi,
The link is https://support.oracle.com , you will have to request Oracle to link your user with your company support account.
Cheers,
Vlad

Can't create DTP for cube migrated from business content to 2004s

I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s.
Master data was not a problem, but Im having a hard time getting InfoCubes to migrate.
I installed 0PUR_C03 from Business Content and replicated the DataSource into the Data Warehouse.
I right-clicked 2LIS_02_S013, selected Additional Functions, then chose Transformation erzeugen (a.k.a. Create Transformation in English).
The transformation is generated with no errors and it was activated. The DataSource is migrated automatically in the process.
Then, I went to add the Data Transfer Process and that is where I got stuck.
I right-clicked the cube and took Create DTP. For source type, I selected datasource. A dialog box then shows the objects associated with the cube, including the converted infosource, but nothing is highlighted for me to choose from, and I cant complete the process of creating the DTP.
Can anyone tell me where I might have gone wrong?

u got it...
Message was edited by:
Raman
Message was edited by:
Raman

Creating Query in Production with Calculated key figures

Hi BW Experts,
Can u pls let me know that in case of Production System when we are allowing users to create reports with Adhoc Web Query Designer and using CKF + RKF
(Calculated key Figure) which is already transported to Production in a specific Package, Is Production system will allow to save report?
Pls sugges how to solve this problem ..to give permission for users to create reports in production server with CKF RKF?
Thanks in advance

rsa1 -> transport conection -> object changeability button -> Set query elements as everything changeable.
If you want to refine this you have to do by authorizations.

Creating Indexes in Production Server.

Hi All,
1. We have master data table in Production server with 2 million records.This master data table doesn't have
any Indexes created which causes the delay in Loading process. How to create indexes in production
2. This table have Index created in DEV but was created as $tmp package so cannot be transported.So if i
create the Index for this master data table which already having the data what could be the impact like loss of
data or any other way.Please post your valuable comments.
Thanks & Regards
Kranthi.
Edited by: Arun Varadarajan on Apr 15, 2009 11:54 PM

Hi Kranti,
Creating Secondary Indexes
Procedure
1.     In the maintenance screen of the table, choose Indexes.
If indexes already exist on the table, a list of these indexes is displayed. Choose .
2.     In the next dialog box, enter the index ID and choose
The maintenance screen for indexes appears.
3.     Enter an explanatory text in the field Short text.
You can then use the short text to find the index at a later time, for example with the R/3 Repository
Information System.
4.     Select the table fields to be included in the index using the input help for the Field name column.
The order of the fields in the index is very important. See What to Keep in Mind for Secondary Indexes.
5.     If the values in the index fields already uniquely identify each record of the table, select Unique index.
A unique index is always created in the database at activation because it also has a functional meaning
(prevents double entries of the index fields).
6.     If it is not a unique index, leave Non-unique index selected.
In this case you can use the radio buttons to define whether the index should be created for all database
systems, for selected database systems or not at all in the database.
7.     Select for selected database systems if the index should only be created for selected database
systems.
Click on the arrow behind the radio buttons. A dialog box appears in which you can define up to 4 database
systems with the input help. Select Selection list if the index should only be created on the given database
systems. Select Exclusion list if the index should not be created on the given database systems. Choose .
8.     Choose .
Regards,
Prabhudas
Edited by: Arun Varadarajan on Apr 15, 2009 11:53 PM
Edited by: Arun Varadarajan on Apr 15, 2009 11:54 PM

Transporting role menu and workbook created diurectly in production system

Hi gurus,
We have several workbooks (and queries) that are created directly in production system. thoose workbooks are connected to a role that is created in development system and transported to production system.
Now, we would like modify this role in development then tranport it on production system, but we are afraid that will be wiped out (overwrite) our production system workbooks (because the role not contains this workbook in development).
Could you please explain to us what we have to do in order to not wiped out our production workbooks.
Thank you in advance

thank you, it's more clear for me...
Exactly, to have all my requests and workbook in development, I tried to use "Transport order of copy (it means transport queries from Production system to development system)", then to connect them with the corresponding roles in development, but I have the think that BW considers them as new requests when I re-transport them again on the prod.)
Could you say me if i can transport my production system queries on my development system, and manage them in this system (development) in the future.
Thank you in advance

How to Activate Transformations and DTP in PRODUCTION

Hi Experts,
I Have done some modifications in datasource in R/3 when i treid to run the Infopacakge in BI, I see the Datasource is inactivate.
So I have activated the DS through the program in se38 rsds_datasource_activate_all, after that i see the transformations and DTP is inactivate.
In 3.5 we have program to activate the transfer rules and updates though rsds_transtru_activate_all i dont have idea for update rules program to activate.
*Is there any program to activate the transformations and DTP in Production.Rather than re-transport entire thing.*
Regards.

There is no activation program for Transformations. In order to do that in production, you would have to have the client opened for modification and manually activate the Transformation(s) that are in a deactivated state. This isn't advisable however. The best approach to activate deactivated Transformations is to capture on a transport in the development environment and move that transport throughout the landscape to production.
The SAP delivered ABAP program RSDKDTPREPAIR is available for activating DTPs. There is no selection screen for this program, however, and therefore it would try to activate all DTPs. This program should only be executed in background.
Here are the other activation programs in case you need them or are interested (I realize that you mentioned or more already):
RSDG_CUBE_ACTIVATE (InfoCube)
RSDG_IOBJ_ACTIVATE (InfoObject)
RSDG_MPRO_ACTIVATE (MultiProvider)
RSDG_ODSO_ACTIVATE (DSO)
RSQ_ISET_MASS_OPERATIONS (InfoSet - Requires client to be opened)
RSDS_DATASOURCE_ACTIVATE_ALL (DataSource)
SAP delivered program RSDS_TRANSTU_ACTIVATE_ALL is for activating Transfer Structures, which aren't relevant for 7.x DataSources.

Trying to duplicate this "Energy Flow" effect (originally created in AE)

Following the tutorial from videocopilot on "soul removal"...
http://www.videocopilot.net/tutorials/soul_removal/
I created a couple variations on an energy glow effect in AE, here:
http://www.youtube.com/watch?v=HzdwK2LoQbE
http://www.youtube.com/watch?v=KWYrfsSMZ0k
I think this should be easy to duplicate in Motion, but I'm going slightly nuts trying to figure it out. The effect is created by having some simple white circle particles with AE's Fast Blur and CC Vector Blur added. I know how to do something similar to Fast Blur in Motion, but I can't figure out how to achieve something equivalent to CC Vector Blur. There must be some way of creating something similar, though. Any Motion gurus out there care to help me save my sanity?
(I know there are somethings that AE can do, that Motion can't, but I don't think this is one. I would hope that Motion is able to do this)

First of all, thanks for intriguing me enough that I decided to waste my morning figuring this out.
Anyway, I watched the tutorial, and the conclusion I came to is that to attempt to duplicate the tutorial step by step is to undermine motion's capabilities.
Now, I will preface this by saying that my "energy flow" is not identical. But I think it looks really good. Also, I didn't work to modify it all that much, so I'm convinced that with a little tweaking, it'll look even better than the AE version.
Ok. When watching the AE tutorial, Andrew Kramer uses the CC Vector blur to turn circle particles into more of a smoky, curvy line. When looking at the way vector blur affected the particles, it reminded me of the caustics generator in Motion. So here's what I did.
First, I borrowed a pre-existing particle emitter that already looks like energy. You can find it in the library under the abstract folder in Particles. It's called Flow 01 interestingly enough. Then I adjusted the emission angle to 90 and the range to a small number like 7 or so. This gets the particles (which BTW are curved lines, not circles) moving to the right like the tutorial.
Then I increased the speed quite a bit, and the birth rate a little, and introduced some speed randomness. Again, you can tweak these to give this the look you want. Once I got the flow moving, I had to set up the distortion.
I created a new group and placed the caustics generator in there. I tweaked the generator so that the water-like ripples were small, bright, and had a high level of refraction. Then I applied a gaussian blur to the generator to soften the edges quite a bit.
Going back to my particle group, I added the Refraction filter from the Distortion folder. But (and this is important), I added it to the GROUP, not to the emitter. The reason has to do with a step below. I used the caustics generator as the source for the refraction (and turned off the caustics group as well) and made sure I had high levels of refraction and softness.
This more or less made my emitter look like a reflection in water, until I fixed the resolution for the group. Then I got the look I was going for.
And that is all there is to it. You'll still have to do the rest like duplicate the emitter, add an emitter that does the little flying particles, but the energy stream looks good to me.
I'm including a link to my project so you can take it apart. I hope this helps.
[Energy Flow|http://www.timesavertutorials.com/fileshare/energy.zip]
Andy

Unable to create DTP

HI
I am trying to create DTP for a master data infobject, before i do any change,
i m getting a message "Enter a valid value" and am unable to proceed further
plz help
Regards

U have to apply following SAP note.
Note 1171462 - Error while maintaining DTP for Master Data Update
Summary
Symptom
You are unable to create/maintain a Data Transfer Process(DTP) which loads Master Data into a Characteristic. While maintaining the DTP, you encounter an error message - 'Enter a valid Value' (00 002) and you are unable to navigate out from the 'Update' tab of the DTP.

Effect of creating DTP in production

Similar Messages

Maybe you are looking for