Stacking order on PrEl 9 not working

I am trying to change the stacking order on simultaneous multiple video tracks. I have two tracks on the screen, I select one from the timeline and then right click on it in the monitor panel -- the option of Title>Arrange doesn't come up. When I go to the options bar at the top of the page and click Title>Arrange, it will not let me select it. In the help topics, PrEl 7 & 8 are covered with these instructions, but 9 is not. Any ideas? Thanks a million if you can solve this! -JD

As Steve points out, the "stacking order," or Arrangement is only available for elements in a Title, like Shapes, or Text.
To change the "stacking order" of elements such as Clips, Still Images, or Titles, they can be Selected, and then dragged to higher (or lower) Video Tracks, that are empty.
Hope that helps, and good luck,
Hunt

Similar Messages

In Report,order by clause is not working

Hi All,
For the report i prepared the query in this one am using the order by clause,i run the query in the sql plus working fine am getting the data based on the order by clause.when i use the same query for the report am getting the data but not in the order(i.e order by clause in not working).
Please help me how to do this one.
Thanks in Advance.
Regards,
Leelakrishna.G

Hi Dora,
Data is coming in the proper sequence,but in the first group data is not coming(In first group data first line only displaying,remaining data is not comming).
My req is:
The report is executing based on the creation date(i.e.,from creation date to today).
In this so many Purchase requisitions will be there for this one different approval in different times will be there.
For Ex:
we will take 2 PR number only(for the first one 3 approvals,second one 4 levels of approval).
1. one supplier 1person raised by 1PR submit
No Action
Approve
2. 2Supplier 2personraised by 2PR Submit
NO Action
Forword
Approve
with ur suggestion am trying data is gettin fine but first group first line is coming remaining data is not coing.
EX:
1. one supplier 1person raised by 1PR submit
No Action
Approve
2PR Submit
NO Action
Forword
Approve
Note:"2. 2Supplier 2personraised by " this kind of lines data is missing.
Can you pls check and suggest me how i can do this.
Thanks in Advance.
Regards,
Leelakrishna.G

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

Hello
Please see notes and 4 attachments for your reference. Hopefully this information helps.
Maureen
what version of iPhoto are you using? 9.5.1
what system version are you running? OSX 10.9.4
what happens when you try to order? See attached picture. I want to share pics to FB & FLICKR etc
did you make sure you've selected the correct Print Products store in iPhoto's Advanced preference pane? YES
what fixes have you tried? Restarted computer. I'm not very computer savy. I have had no problems with this in the past.
where is your library located? I have not moved anything for iphoto.
did you apply any updates or upgrades just prior to the problem occurring? I can't remember
are you running a "managed" or "referenced" library? Not sure how to find this out
what type of Mac? iMac 2.5 GHz Intel Core i5
how much free space on your boot drive? 12 GB 1333 MHz DDR3 - I have an external hard drive 1 TB

Purchase order release strategy Workflow not working

Hi All,
I am working on PO Approval release strategy and it is not working fine . The release strategy set up is configured by my functional consultant . I just copied the standard workflow template WS20000075 and making changes to my custom workflow template . When ever po is created an event "RELEASESTEPCREATED" get triggered and the first approver receives an workitem and when he approves it goes to Second Approver and it is working fine . But when rejected then a notification email goes to initiator . Now when an initiator login into ME22N and made any changes ( even material text change ) in it then again "RELEASESTEPCREATED" event getting triggered . But I need to trigger my workflow only when there is change in PO Net value .
Kindly help me how to achieve this functionality .
Thanks and regards
Dilip

Hi Vikram,
There is already an existing entry for BUS2012 with event CHANGED against the change doc EINKBELEG .
Acutlly when login as initiator and try to change PO through ME22N here are my observations :
case 1: When Buyer click on " Cancel Reject " button and do any changes ( even text change ) then RELEASESTEPCREATED and CHANGED events are triggering . But since the event linkaged is set to RELEASESTEPCREATED workflow get restarted again.
Even the CHANGE event does'nt have 'RELEASECODE' as parameter to restart workflow .
Case 2: When Buyer doesn't click on " Cancel Rejection" buttion and do any changes then only CHANGE event get triggered
which do nothing since there is no event linkage .
Is to click on " Cancel Reject" button mandatory ? . But even though we make " Cancel Reject" as Button mandatory then RELEASESTEPCREATED Button triggering for any change but we need to trigger it for only net Value change .
Thanks and regards,.
Dilip Kumar

SORT BUTTON ON PURCHASE ORDER ITEM OVERVIEW IS NOT WORKING

Gentlemen
We have recently upgraded our system from SAP R3 4.6 to SAP ECC 6.0. After the upgrade we have noticed an issue in transactions ME21N, ME22N, ME23N; despite the u201CSortu201D button on the item overview is available, itu2019s not working. It doesnu2019t sort (ascending or descending) material, material text or any another column.
Please let me know if there is a sap note to adjust this mistake or another advice.
Thanks
JM

To fix this:
Goto Personal settings --> Basic settings --> Item overview: "Check" Item overview as grid control.
Once grid control is active, you should be able to sort columns.
Hope this helps-

LOV based on Query - ORDER BY :P_ITEMVALUE does not work

Hello guys! I have a special request that I'm focussing on. I have a couple of select lists in my application that contain tree species.
On the first page the user has the opportunity to assign a ranking to the respective tree species. The database column storing that information is named INT_BEDEUTUNG.
Instead of using that order by clause continously I want to be able to change the order by definition using two buttons. One is used to order alphabetically (column BA_LANG) and one is used to order by the field INT_BEDEUTUNG.
Hence I tried to bind an item (P6_SORT) via a button, assigning it to either BA_LANG or INT_BEDEUTUNG.
The tree species select lists in my reports are based on LOVs using the following query:
SELECT BA_LANG, LNG_BAUMART
FROM VT_TBL_BAUMART, vt_tbl_BAUMARTENBEDEUTUNG
where CNT_BAUMART = LNG_BAUMART and
LNG_GEBIET=:P6_lng_gebiet
order by :P6_SORTI thought that if :P6_SORT conatins the value BA_LANG or INT_BEDEUTUNG, the selct list would be ordered accordingly. Unfortunately it doesn't, although P6_SORT is not empty?
Do you have an idea what I am doing wrong or how to change the order by clause for that query for the whole application?
I'd appreciate your interesting answers and thoughts!
Best regards,
Sebastian
Edited by: skahlert on 17.09.2009 08:52

@ Roel
Thanks Roel! I believe your suggestion works! Thanks a lot! Great to get such a rapid solution! :-)
Nevertheless I have one more question. I am using 2 html buttons on page 1 with URL-redirect in order to set the item on a specific page. This was for testing purposes only.
Now I just want to set the attribute or value on page one where the respective buttons are placed.
I have other navigating buttons on the same page, which when clicked, bind items on the target page. These should be used throughout the application to forward the item value for P_SORT.
Now the question is - how can I bind an item on page 1 without being redirected? Is there a javascript routine or a simple trick that does the trick???
Thanks again and best regards,
Sebastian

Help: ORDER BY variable does not work in CS3

I have a variable in my recordset query for the ORDER BY
clause which is set by the URL variable, 'order'. With CS2 the
recordset worked fine with the variable. CS3 shows N/A for the
variable type in the Recordset dialog, and when I click Test to
test my recordset, it says I need to specify a variable type. So I
set it to 'Text' and suddenly the variable doesn't even work. It
just orders the records by ID. Am I going to have to use CS2 to
create recordsets with an ORDER BY variable in the future or is
there some other way around this?

AngryCloud wrote:
> In CS2, Dreamweaver does not ask for a data type.
There is no such thing as Dreamweaver CS2. You are presumably
talking
about the version of Dreamweaver that was bundled with Adobe
Creative
Suite 2 after Macromedia was acquired by Adobe. That was
Dreamweaver 8.
From the sound of it, you have the original Dreamweaver 8,
which didn't
use data types for variables. Everything changed when the
8.0.2 updater
was released. The updater made important changes to the way
Dreamweaver
handles variables in SQL queries. These are designed to
prevent
malicious attacks through SQL injection. Dreamweaver CS3 uses
the same
code as Dreamweaver 8.0.2.
If I remember correctly, Dreamweaver will automatically
update all the
code if you open the Recordset dialog box, make any changes,
and then
click OK. If that doesn't work, the safest approach is to
select the
Recordset in the Server Behaviors panel, and click the minus
button to
remove it cleanly. Then build the recordset again: a
nuisance, I know,
but it makes your code more secure.
When using LIKE in a SQL query, you must always choose Text
as the data
type, even if you're using numbers in the variable field.
This is
because the SQL specification says that LIKE is for comparing
strings.
Dreamweaver 8.0.2 and above now follows the SQL
specification, whereas
it didn't before.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Order of PathCheck directives not working?

Hello,
I have an odd problem with the execution order of the PathCheck directives in obj.conf file. I understand it that these are executed in order in which they appear in the file.
We're using the SmartFilter 4.2 content filter.
Basically the way I understand this should work is that the check-acl PathCheck directive should execute first (for the default ACL), presenting the authentication prompt, and then after that the sf-url-check PathCheck directive should execute at which point SmartFilter will then decide if it'll allow the page to be loaded or it'll return it's denied access page.
What's happening in actuality though is that if the page is one which SmartFilter would block, the proxy authentication prompt does not appear. If the page is one which SmartFilter would allow, the proxy authentication prompt does appear. I've swapped order of PathCheck's around and it doesn't change things.
If I replace sf-url-check with the default url-check everything works fine.
It's as though regardless of the order of PathCheck directives the SmartFilter one executes first and if it doesn't like the URL it just blocks it skipping the proxy authentication PathCheck directive, but if SmartFilter does like the URL it allows the proxy authentication PathCheck directive to execute.
I'm confused as I thought the order of the PathCheck directives executes in order of their appearance, but someone perhaps SmartFilter is overriding this.
This is in v4.04 of the proxy as SmartFilter presently doesn't support v4.05.
Any thoughts?
Here's the default object code from obj.conf:
<Object name="default">
PathCheck fn="check-acl" acl="default"
PathCheck fn="sf-url-check"
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve" method="*"
</Object>
Here's the default ACL from generated.proxy-testing.acl:
acl "default";
authenticate (user,group) {
database = "default";
method = "basic";
prompt = "Internet Access";
deny (all)
(user = "anyone");
allow absolute (all)
(group = "ApprovedInetUsers");
-----

Hello,
Does anyone have any thoughts as to what is causing this?
Thank you.

SALES ORDER REASON FOR REJECTION NOT WORKING .

Hi Friends
Though user mention reason for rejection in preceding sales orders' line item s,still those line items are being copied to subsequent documents ( to another sales order and billing document ) .
Do you feel there may be problem is in standard SAP functionality or I have to do something in configuration ( copy control ) to restrict it ?. not one sales order , it's happening for all the sales orders .
Thanks in advance
Rusheek

Please check ur copying requrement routine in VTAA must be "301" and "Pos./neg. quantity" must be "+". Check with this configuration,
If any query please revert back
Rgds
Dhirajjjj

Purchase order on Hold is not working from Sales Order document

Hello gurus,
I'm detecting a problem that I have.
I have created a Sales Order and then, this document create a Purchase Requisition in automatic.
So, when I create the purchase order, adopting the purchase requisition, I want to save this as on Hold.
The problem is that the button "Hold" is missing.
But, if I create a purchase requisition and I register the sales order directly (account assignment "E") and then, I create the purchase order, adopting the purchase requisition, the button "Hold" is not missing.
I have active the BADI to Hold, but, it is only mention restrictions with Third Party and Services, not with Sales Order normal.
Could you help me please a.s.a.p.?
Regards,
Sandra Palomo

Application component: MM-PUR-PO-GUI
Function group: MEPO
The Business Add-In (BAdI) ME_HOLD_PO enables you to specify whether an
Enjoy purchase order can be put on hold or whether this function is to be
suppressed in accordance with your requirements.
In the standard system, this function is generally offered during the
creation of an Enjoy purchase order (transaction ME21N) and when a PO
that is on hold is changed (transaction ME22N).
Note
Enjoy purchase orders cannot be put on hold if any of the following
criteria apply:
o The PO contains service items
o The PO contains "third-party" items
o Commitment errors are involved
o Subsequent (period-end volume rebate) settlement is involved
In the case of stock transfers within a company code, the "Hold" function
is generally inactive. If an application object contains an error of any
kind, the function is likewise inactive.

Ordered Qty in Sales order exit USEREXIT_CHECK_VBAP is not working

Hi All,
In a requirement, I changed the ordered quantity in a Sales order in the exit USEREXIT_CHECK_VBAP to a desired quantity.For eg: Some one has entered a quantity 5 and pressed enter, my program logic in that exit changed that quantity to 10, after saving it get reflected in VBAP-KWMENG as 10, uptill this it fine.
Now the problem is when I want to see the same saved Sales Order through VA02 its show me the previously entered qty as 5 not 10.
Kindly let me know if there is anything am missing.
Kindly help me out.
Thanks
Bhagat

write your code in the below
      FORM USEREXIT_SAVE_DOCUMENT_PREPARE                           *
      This userexit can be used for changes or checks, before a     *
FORM userexit_save_document_prepare.
ENDFORM.                    "USEREXIT_SAVE_DOCUMENT_PREPARE

Gwen Stefani Pre-Order single automatic download not working

Gwen Stefani Pre-Order offers to download a single track now and then the rest later when the album is released.
Ordered the pre-order but the track didnt download.
Now on my THIRD reply to try and get apple support to understand what is happening, so far I have a one track credit and told to download the song...only problem...its a pre-order you cannot download the song.
Why do apple employ people in iTunes support that dont know how iTunes works?
Why am I on my THIRD reply to explain the same problem?
Why am I wasting my time?
Exaspirated at having to fight apple these days, maybe i'll go back to microsoft, it all seems to be much of a muchness at times!
As you can tell this latest problem is only the tip of the iceberg in recent months and its beginning to wear me down.

Support appear to have gone into a huddle and promised me a reply once they sort it out.
Guess we arent the only ones to complain.
Maybe as this is the international version someone lazily copied the US version of the page and didnt notice that bit of text with the promise and therefore it was never setup in the UK store or elsewhere?
Just a hunch

Dense_Rank() over order by date fields not working properly

Hi,
i have a pl/sql statement which looks like this:
WITH OrderedByDateTable     AS
     SELECT     gsp.*, DENSE_RANK () OVER (ORDER BY A_varChar_col1,
decode(upper('COMPLIANCETICKSDATE'),'TASKNBR',TASK_NBR,
'DESCRIPTION', DESCRIPTION,
'PARTNBR', PART_NBR,
'PARTSERIALNBR', PART_SERIAL_NBR,
'SORTDATE', TO_DATE(MIN_EST_DUE_DATE),
'COMPLIANCETICKSDATE', COMPLIANCE_DATE,
TASK_NBR
)DESC NULLS LAST,task_nbr,description,enrtask_id)     AS r_num
     FROM     GT_STATUS_PAGING gsp
SELECT     *
FROM     OrderedByDateTable
The result that i am expecting is that the dense_rank should order the compliance_date column in desc order and finally gives ranks to the rows.
But i am getting the resultset in some order all the time, but it is neither ASC or DESC.
But if for debugging purposes, lets say if i replace the COMPLIANCE_DATE column with DESCRIPTION column again it works perfectly fine giving me the descriptions in DESC order along with the ranks. But for both the date fields above it doesnt work.
Can anyone please help me on how to solve this?

user12270778 wrote:
Hi,
i have a pl/sql statement which looks like this:
The result that i am expecting is that the dense_rank should order the compliance_date column in desc order and finally gives ranks to the rows.
But i am getting the resultset in some order all the time, but it is neither ASC or DESC.
Can anyone please help me on how to solve this?The problem is an implicit date conversion that takes place.
Because the first parameters of your decode are strings, the COMPLIANCE_DATE column is also converted into a string. This string is then sorted alphanumerically. The default format mask is often DD-MON-RR. Therefore your date column would be sorted by day, then by the name of the month and so on.
Fast solution would be to do an explicit conversion from date into strings that match the ordering.
WITH OrderedByDateTable     AS
        (     SELECT     gsp.*, DENSE_RANK () OVER (ORDER BY A_varChar_col1,
                     decode(upper('COMPLIANCETICKSDATE'),
                               'TASKNBR',TASK_NBR,
                               'DESCRIPTION', DESCRIPTION,
                               'PARTNBR', PART_NBR,
                               'PARTSERIALNBR', PART_SERIAL_NBR,
                               'SORTDATE', TO_DATE(MIN_EST_DUE_DATE),
                               'COMPLIANCETICKSDATE', to_char(COMPLIANCE_DATE,'YYYYMMDD HH24:MI:SS'), /* this is the important bit */
                               TASK_NBR
                               ) DESC NULLS LAST,task_nbr,description,enrtask_id)     AS r_num
                    FROM     GT_STATUS_PAGING gsp
SELECT     *
FROM     OrderedByDateTable     You should be careful, because the same problem also happens with your SORTDATE column MIN_EST_DUE_DATE.
Edited by: Sven W. on Oct 25, 2012 6:53 PM

The link display order in SAP does not work

HI all,
When i execute a query in query designer and later if i right click on the report output "DISPLAY ORDER IN SAP" this link is not
active and when i press this link nothing happens.Prior to upgrading to win 7 this link was active and on clicking, it used to open
SAP WINDOW (DISPLAY ORDER :INITIAL SCREEN ) containing the order value present in report.Earlier i was on win XP.What can be the possible reason???
Tnanks in Advance

There isn't an iCloud control panel that is compatible with Windows XP. You have to have Vista or higher.
Here's the one for Vista: iCloud Control Panel 2.1.3 for Windows Vista, and here is the one for Windows 7 / 8: iCloud Control Panel 3.1 for Windows.

Bug - Sorting Order in SQL Reports not Working?

Today i defined a SQL Report in APEX and choose 3 columns for sorting the report.
The order is like that:
1. Category
2. List Price
3. Product Name
When calling the SQL Report in a new session i expected to get a sorted report like defined.
I got only the report like the last person who edited this report.
It looks like that the Sort Sequence columns is not usable in SQL Reports.
Here is an example based on the problems which i described:
http://apex.oracle.com/pls/apex/f?p=40082
below the SQL Report a screenshot is shown, where the Report Attributes (and the sort sequence) is displayed.

OliverL
Did you reset the pagination of the report you made the changes to?
Normal behaviour is that APEX remembers per user per report the last sorting that was used.
Including when a user clicked a column header to change the order from the default one.
The sort preference are stored in preferences with a name like FSPapp_id_Ppage_id_Rinternal region_id_SORT.
Nicolette

Stacking order on PrEl 9 not working

Similar Messages

Maybe you are looking for