Efibootmgr 0.5.4 works but 0.6.0 fails silently

The code below works flawlessly with the 0.5.4 version of efibootmgr but not with version 0.6.0 ... it fails silently and does not add any entries to the NVRAM.
echo "initrd=\EFI\arch\initramfs-linux.img root=/dev/mapper/vgTESTDrive-lvRoot cryptdevice=/dev/md33:vgTESTDrive add_efi_memmap pcie_aspm=force quiet" | iconv -f ascii -t ucs2 | efibootmgr --verbose --create --write-signature --gpt --disk /dev/sdd --part 1 --label "arch 2013-03-30 14:30:52" --loader '\EFI\arch\vmlinuz-linux.efi' --append-binary-args -
So my question is what changed in efibootmgr 0.6.0 that could explain this and how do I fix my code?

dhave wrote:
timi wrote:depends on the kernel, efibootmgr works with 3.7.* er kernel, and probably pre 3.8.3 but not with 3.8.3 and above on my system (mainboard: asus f1a75m-pro)
due to uefi patches in 3.8.3?
@KairiTech: What kernel are you using? Timi's post has me wondering.
efibootmgr version 0.5.4
Linux archboot 3.6.2-1-ARCH #1 SMP PREEMPT Fri Oct 12 23:58:58 CEST 2012 x86_64 GNU/Linux
Code below works as expected and adds an entry to the NVRAM:
efibootmgr --create --write-signature --gpt --disk /dev/sdd --part 1 --label "TESTarch 2013-04-03 19:45:25" --loader '\EFI\TESTarch\vmlinuz-linux.efi' --unicode "initrd=\\EFI\\TESTarch\\initramfs-linux.img root=/dev/mapper/vgTESTDrive-lvRoot cryptdevice=/dev/md33:vgTESTDrive add_efi_memmap pcie_aspm=force quiet"
efibootmgr version 0.6.0
Linux archboot 3.8.4-1-ARCH #1 SMP PREEMPT Wed Mar 20 22:10:25 CET 2013 x86_64 GNU/Linux
Code below does not add an entry to the NVRAM nor provides any error messages:
efibootmgr --create --write-signature --gpt --disk /dev/sdd --part 1 --label "TESTarch 2013-04-03 19:59:14" --loader '\EFI\TESTarch\vmlinuz-linux.efi' --unicode "initrd=\\EFI\\TESTarch\\initramfs-linux.img root=/dev/mapper/vgTESTDrive-lvRoot cryptdevice=/dev/md33:vgTESTDrive add_efi_memmap pcie_aspm=force quiet"
The two lines of code above are generated by the same script and should be identical except for the time in the label text.
Last edited by KairiTech (2013-04-04 00:20:12)

Similar Messages

  • Hello I have problem of external speakers, right side speaker is working but left side speaker is silent

    Hello all
    I am using iPhone 4s from 3 months
    It was Gud but from a few days itz right side external speaker is working but left side is silent

    If one is speaker and other is mic
    Why the sound of ringtones got very slow even the volume in the settings is at maximum level

  • CDs work but not DVDs "device failed to calibrate laser power level for med

    Hi
    I've been having a problem with my disc drive.
    I can burn CDs but not DVDs. Have OS 10.5.6.
    While trying to burn an error message comes up saying
    "This disc can't be burned because the device failed to calibrate the laser power level for this media?
    I tried to go into Apps - Utilities - Disk utilities and repair, but this message still shows up and refuses to burn anything even in Toast.
    Please help. Any advice would be valuable. Thanks.

    njdesigner wrote:
    Thanks for the advice. I'm going to try the brands you suggested.
    I don't think the drive may be dirty, because wouldn't the CDs not work as well?
    Not necessarily. Different lasers, different power levels, etc.
    It's really a dual drive: CD and DVD. Almost two separate devices with a common motor and platen,etc.
    You can get a cleaning CD from RadioShack and elsewhere. Get the dry one with the small brushes. Works fine on everything but a notebook.

  • ASA 8.2 Global Outside works, but static NAT mappings fail

    Hello,
    I'm usually not stumped by issues, but this one I cannot seem to figure out.
    I have an older Pix and I've mirrored the config on a new ASA with 8.2(5) OS. It's a pretty basic config with one ACL for a few inbound port forwards to servers. The service is Verizon Fios Business.
    When we switch over from the old Pix to the new ASA connectivity through global outside statment work fine. Workstations on the LAN can connect outbound to websites, etc.
    However, none of the servers using static NAT mappings work inbound or outbound. And there are 4 servers, and we've tested them all for various issues. The static mappings are done using the static statement as such "static (inside,outside) exchange 10.0.2.7 netmask 255.255.255.255" and not using a network object. I have other installs with this same exact OS version that work fine with the static statement, so I'm not sure that this has anything to do with it. I'll add that these 4 servers also have inbound ports forwarded via one ACL, which also do NOT work.
    When we switch it back to the Pix unit with same config, all the servers on static NAT work just fine immediately.
    Can anyone give any insite on what the problem might be based on what I've described? I've checked and checked the configs and see no issues. And I've done may ASA configuration/installs, but I would say I'm moderately new to 8.x(x), although as I said above I have others in production working fine with static NAT mappings.
    Thanks for any assistance,
    Max

    another thing you can do in addition to the packet capture mentioned by Harvey is a packet-tracer which will simulate a packet going through the ASA and could point us in the right direction of where the issue is.
    packet-tracer input <interface name> tcp <source IP> <source port> <destination IP> <destination port> detail
    I suggest running the packet tracer in both directions (from the servers to the internet, as well as from the internet to the servers).  Keep in mind that when using the packet tracer with a source out on the internet you need to specify the destination as the NATed IP of the servers.  The following link can give you a little more info on the packet tracer
    https://supportforums.cisco.com/document/29601/troubleshooting-access-problems-using-packet-tracer
    Please remember to select a correct answer and rate helpful posts

  • My imessage keep failing and it wont deliver, my wifi is on everything is working but it just wont work. Also my facetime keeps failing. why?

    I dont know why. my wifi is great its working but just facetime keep failing and my imessage wont deliver all of a sudden

    Have you tried all of the troubleshooting here?
    iOS: Troubleshooting Messages
    It would also help to head to Settings -> General -> Date & Time and make sure it is set to Automatic.  You could also try using Google's DNS servers as doing so has resolved the issue for a number of users.  Head to Settings -> Wi-Fi and tap the > next to the network you are connected to.  Scroll down to the DNS fields and enter in 8.8.8.8 and 8.8.4.4.
    B-rock

  • HT1414 My speaker works but the phone appears to be stuck in silent mode.  Already did a restore!

    I have an Iphone 4s that works fine the speaker is working but all incoming calls are silent.  Like it is stuck in silent mode.  I have already dont a restore but still the same.  Can anyone help me?

    You probably did a restore from backup. Do a restore but do not restore from backup. See if that works. if not - service

  • I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

    I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
    I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
    Thanks in advance.

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • Report works but not when scheduling

    Hi,
    I have a report that copies table contents to a text file. When using this report from se38 everything works but every time we schedule the job from sm36 it gets status cancelled.
    The input to the report is what table should be copied and where it should be copied to.
    The error message is from sm36 job scheduling is: "Could not ascertain code page"
    Message class: FES
    What does this mean?
    regards
    Baran

    Where do you download the text file to?
    If you try to save to your PC, it will never work.
    You can not download to a local drive, only to UNIX or print the file to the spool. Then, later, you'll need to retrieve it either from UNIX or from the spool.

  • Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

    hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

    If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
    Activate AirPrint in Mac OS X;
    http://netputing.com/airprintactivator/
    Add AirPrint to Windows;
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

  • My phone will randomly disconnect from the wifi and when I retype the password it says it is wrong. It will eventually work but I have to wait for a message to pop up on my screen to allow me to retype the wifi password.

    When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right. It will eventually work but in its own time, a message will pop up and allow me to type in the password and it will work. But sometimes it takes an hour or more and sometime it takes 10 minutes. I've seen where other people have had this problem but I don't know how to fix it. I'm not sure if it's an issue with my phone or if it's with my wifi. Does anyone know how to fix this?

    Does this happen with all Wi-Fi hotspots?  A specific one?
    Have you tried forgetting the Wi-Fi connection and then reconnecting to it?
    What about power cycling the Wi-Fi router?

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

    How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

    You have to clear saved password for this page:
    # Open you login page (where you have to enter username and password).
    # Right click on page and select '''Page Info''' form context menu.
    # On last tab ('''Security''') there is '''View saved passwords''' button, click it and delete all saved passwords for this page.
    # Also clear all related cookies (just in case) there is button for this next to first one.

  • I've been working with AI for some time time now & would love to have a light weight viewer to open the files. The bridge is fine when we're working but just being able to toggle through folders is impossible otherwse

    I was thinking of keeping things a bit easier in the way of clicking & dragging artwork into Illustrator. The bridge is fine when we're in the print shop & working but still has problems with some of the file extensions with the vectors. A lightweight no frills viewer that would open anything that Illustrator would open, so we could just burn through our regular file folders without opening AI or the bridge would be a great deal. Add the PS extensions too & we could dance by the firelight. Just offer it to those with the software & the valid codes for their software. I mean if there would be a problem with folks just grabbing it up. Love to have it though.

    A thumbnail preview file icon option would be nice. CorelDRAW has had this capability for its past few versions. It does make it a whole lot easier conducting searches in Windows File Explorer. You can find the right files pretty quickly and then drag/drop them into CorelDRAW.

  • TS3367 facetime used to work but now does not work on any of my devices

    I have been in regular contact until about 4 days ago using facetime on my iphone 5 imac 10.7.5. ipad 2 now none of these devices work from incoming calls from Philipinnes. Take note the caller had latest macbook pro 13 inch  and is able to call Guam on fatetime with success. What is happening why is incoming calls alway failing. This has been 4 days running and is not good enough. Okay I havent got the latest updates but why in the late few days whould this effect anything. I mean 3 devices and none of them work. This is most frustrating and annoying. I have intead used skype which does work but at night time the camera is not as clear. Tanke note also earlier in the year I received calls from Vietnam and although I did have dropouts was always able to connect only these last four days have had no success. Also I have not been able to call out. The wireless has full bar and am near the modem that is not an issue. Unless there has been a recent change why is htis not working all of a sudden.

    THere seems to be a FaceTime issue and some users who have been in contact with Apple support claim that Apple is working on this.
    I have read many posts on the issue and have seen that there are many reporting that when they have updated their various devices to the latest software, the issue has been resolved.
    You can wait for Apple to resolve the issue OR you can update everything to the latest software and see if this solves your issues.

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

Maybe you are looking for

  • Calling a procedure from within a procedure

    Hi Guys, I have created a package to base a form on. The package contains some procedures, one of which is an Update procedure which can be seen below. I have a procedure in another package that I am trying to call. Basically the second procedure is

  • MTO(Diff between complex make to order and sales order based mass prod)

    Hi We are using MTO...Can anyone tell me what is the Diff between complex make to order and sales order based mass prod in finance perspective?

  • Download driver on mac 10.7.4 for HP Laserjet 1000

    just bought an HP Laserjet 1000 and getting error message that reads: installation for 10.6 or lower' and I have a MAC OS 10.7.4. how do I get the driver to load in?

  • Can't sync song info to iphone 4s?

    Ever since I switched from my 3g to a 4s I have noticed the following problem, which I think others have noted as well, but so far I have yet to see a solution: When I change or update song information manually on itunes (like, change the name of a s

  • Issue credit refund for the customer

    Hi, I need to issue a refund to a customer without the need to seup that customer as a vendor/customer in the finance system. Actually I read about this somehwhere and unfortunately I lost track of that webpage (SAP Help). So I think it is possible.