EHP4 - Business Function - FIN_REP_SIMPL_2

Hi,
I´m in Petrobras and I have a doubt about the reports generated after the activations of the business function FIN_REP_SIMPL_2 - Reporting Financials 2.
I Would like to now where I can or I will look the reports? What ne next steps that I heve to do to have, to see the reports on the portal and the address of the portal?
I´m looking for a documentation about the activation of these business function X Portal (acess) on SAP´s site, but I have not success, can you help me?
Thanks In advance,
Best regards,

Hi Egberto,
You can find the business function document, containing links to information on the individual reports, here: http://help.sap.com/erp2005_ehp_04/helpdata/en/6a/cd7dbd74694af3ac13b3c24a10def4/content.htm
Best regards,
John

Similar Messages

EHP4 Talent Management business function CA_HAP_CI_1

Hi
We have applied EHP4 and have ECC6 Basis 701 SP6 and HR 604 SP24 and Netweaver EP7.
Has anyone experience of acitivating business function CA_HAP_CI_1.
I have researched this functionality and know of SAP notes 1239427 and 1239426.
It would be most useful if someone could advise on what steps they have taken when activating this business function and what other configuration steps have been done.
I know to activate it is done in the IMG under Activate Business Functions.
Many thanks
Julie

Hi,
This can be activated in SWF5 .Ask basis consultants to activate it.
Cheers
Kumar

Business functions to be activated after EHP4 upgrade

Hi All,
I have recently upgraded ECC 6.0 to EHP4.The following technical usages were selected during download.
Financial Services,Financial Supply Chain Management and Financials.
Please let me know what all business functions that are to be activasted.
Do I have to activate business functions for EHP2 and EHP3 as well.Below are the BFs for our usage types.
Business Function                           Technical Usage                         EHP
/IBS/EAFS_RBD_BUSOPR                           Financial Services                          4
EAFS_BCA_BUSOPR                           Financial Services                          4
EAFS_CML_LOANS_POOLING                Financial Services                          4
FICAX_BILL_INVOICING                           Financials                                                4
FICAX_CI_1                                                Financials                                                2
FICAX_CI_2                                                Financials                                        4
FIN_FSCM_CCD_INTEGRATION               Financial Supply Chain Mgmt     4
FIN_FSCM_INTEGRATION                           Financial Supply Chain Mgmnt     2
FIN_TRM_CORR_FW                           Financial Services          4
FIN_TRM_INS_HM                           Financial Services          4
FIN_TRM_LR_FI_AN                           Financial Services          3
FIN_TRM_LR_FI_AN_2                           Financial Services          4
FIN_TRM_PSM_INTEGRATION      Financial Services          4
INS_FSSR_CI_1                           Financial Services          3
INS_FSSR_CI_2                           Financial Services          4
INS_FSSR_I18N                           Financial Services          4
Out of the above FICAX_BILL_INVOICING,FICAX_CI_2,FIN_FSCM_CCD_INTEGRATION,FIN_TRM_INS_HM and FIN_TRM_LR_FI_AN_2 have dependencies like X_CONT or BI_CONT which are not installed on the system.
I guess I can't activate these business functions.Am I right?
And I read that only one BF set is activated per one system.I did not find any BF set related to Finance in the drop down list of SFW5 in the system.Please enlighten me on this topic.
Regards,
Dinakar
Edited by: mutnuru dinakar on Mar 8, 2011 1:44 PM

> Thanks for your reply,as I mentioned the list of BFs are applicable for the 3 technical usages I had selected during EHP4 upgrade.I need to select out of them.
I understand your question - however, how should anyone else but you know whether you need the functionality behind them? This is a business decision.
I suggest you use the documentation (press on the corresponding "i" in SFW5) to see if the business requires the functionality. If yes, enable it, if not, you don't need to enable it.
Some of those BFs will need a BW/BI to work. You have to decide, whether you need them or not.
Markus

Switching on HCM business functions with EHP4

Hello
We have installed EHP4. When trying to activate business functions for talent management using the img, we get a message "no activation necessary".
Does anyone know why this is so and how it can be fixed
Thanks

Thanks Sergio. Can you tell me where the planned column should be located? Is this the same as planned status?
When I open this configuration task, I have a planned status but no planned column.
I have the following
Business Function Set is blank
Under Enterprise Extensions, business function EA-HR is activated and release is showing 600
Under enterprise business functions, the function I am trying to switch on is HCM_TMC_CI_1 (it shows release 604).
The columns I see are: Name; Description; Planned status; Dependencies; Documentation; Release info; Release; SAP Test Catalog; Test Catalog and Activated On
Is it possible that the basis team did not install ehp4 properly?
When I look at system status in the test system it shows the followign for basis and hr
basis 701
ea-hr 604
thanks

Help on Business Function "Reporting Financials 2" and its impact

Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.

Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus

Active business function RE_GEN_CI_1

Hi experts,
I have installed SAP ERP 6.0 EHP4 Ready - Support Release 1, ABAP-based
I want to active business function RE_GEN_CI_1. But I cannot find RE_GEN_CI_1 in T-code SFW5, what wrong?
Please help me,
Thanks so much

Hi,
business function RE_GEN_CI_1 is part of software component EA-APPL. Have you installed EA-APPL already and activated EA-FIN? Please refer to SAP note 628208 for further information about prerequisites for activation of RE-FX.
Regards,
Franz

Active business functions for IS-OIL Downstream

Dear all,
I have system NW701/ECC6, and upgrade EhP4.
Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS, I found a lot of business functions:
BUSINESS_FUNCTION_BASIS_COM               Business Function Basis (COM)
COMMODITY_MGMT_&_BULK_LOGISTIC       Commodity Management and Bulk Logistics
COMM_MGMT&BULK_LOG_1                         Commodity Management and Bulk Transports
ISR_RETAILSYSTEM                                       Other Enhancements for SAP Retail
LOG_COMMODITY_TRANSPORT_MGMT_4   Commodity Management and Bulk Transports 2
OIL_PRODUCTION                                           Upstream Production Management
OIL_REVENUE_ACCOUNTING                         Upstream Revenue Accounting
REMOTE_LOGISTICS_MANAGEMENT             Remote Logistics Management
Can any one help me, what business functions do I need to active for Downstream ?
Thanks all,
Thanh.

I create customer message ask SAP and these are downstream functions need to active:
1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
3. COMM_MGMT&BULK_LOG_1 (EhP3)
4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
Thanh.

Query on Enhancement Pack Upgrade/ Installation-Business Functions install

I am working on an Enhancement Pack Upgrade. I have the following questions from the Client, can you please help answer u2013
Scenario u2013 Upgrade from ECC 6.0 to ECC 6.0 EhP4
1 Using Business Function Prediction service, assume SAP recommends 10 Business functions to be installed. We install the 10 business functions and after 6 months the client realizes that there are some more functions which will help business.
a.What does it take to install the additional business functions.
b.Do we have to do the entire EhP4 Upgrade again
c.If we have to do the entire EhP4 Upgrade again what happens to the initially installed business functions, will that be overwritten
d.What will be the additional SPDD and SPAU effort to activate the additional business functions, will that be same as the initial SPDD/ SPAU effort.
2 Can we install all the Business functions available in EhP4. What happens if we install all the business functions. What will be the additional effort or overhead in terms of hardware, database, ABAP effortu2026..?
Thanks in advance.

Hi,
1. For installing additional business functions you need to again run the whole EHPI process. But what I feel is even you install more than 1 business function you will be able to activate only 1 business function per system.
2. The initially installed business functions would not go anywhere. You need to select them in your solman before the stack.xml file generation.
3. SPAU/SPDD effforts depends on your system. So no comments.
4. If you plan to install all business functions then you will need good amount of DB space and your upgrade downtime would be high.
Regards,
Nirmal.K

How to activate Business Functions in SAP.

Hi ,
I want to activate business fucntion LOG_MM_CI_2 related with MM bapi. I found that, we can activate any business function by using transaction code SFW5 . But i can not find the above business function in this transcation code.
I am using ECC 6.0 support package SAPKA70006.
Note: (Please let me know, the right forum if this is not the right forum to discuss this question).
Regards
PG

Hi,
Your requested functionality is delivered in EHP 2 & 3 . So as suggested you need to install ehp3 or EHP4 on your server.
Regards,
Vamshi.

Activation o business function

Hi guys,
Can you let me know how to activate the ollowing business function in SRM 7.0
Presently to go ahead with the configuration i noticed that these two are not activated.
SAP SRM Procurement for Public Sector Basis (/SAPSSRM/SRM_CROSS_INDUSTRIES)
SAP SRM Procurement for Public Sector Functions (/SAPSSRM/SRM_PPS)

Hi,
But it should be done in 000 client. We faced some problems activating the ISU switch in EHP4. We activated this in our working client few functionalites were not active. So SAP has suggested to perfrom this in 000 client.
May be this adds some infor for your query.
Regards,
Vamshi.

Procedure Business Function Activation - How To

Hi all,
i have a customer that just upgraded it's systems to ehp4, our newest available release. He is now asking on a general best practice procedure how business functions should be activated in which client and what needs to be transported or not.
He has a system with a reference client (000) and a customizing client (200). My guess would be:
- Activate all required business functions in client 000.
- Make sure, all BC-Sets have been extracted and activated perfectly.
- Activate all missed BC-Sets manually in client 000.
- Transport all changes to client 200.
- Make sure the transport was performed successfully.
- Activate all required business functions in 200.
Is that the correct approach? I guess BC-Sets containing C-Tables can only be activated in a reference client!?
Thanks. Kay.

Sunny - Thanks for the reply and I appreciate the help. You indicated that if transports do not have objects related to the business function, they may not be affected. That's the crux of my question. I certainly understand if SAP requires matching BF activation for any transports that change config in that area, but want to be sure an upgrade of one piece of functionality is not impacting ALL transports to related systems.
Our main driver for the EHP project is updating functions in FSCM (Dispute Management, Collections, etc). These are the only BFs we're intending to activate at this time. I'll lay out an example of my question:
EHP4 installed in all systems (Dev/QA/Prod). Active Business Functions from EHP4 are only related to FSCM and they are only active in Dev system for unit testing. Now say an issue arises in Prod related to Fixed Assets that requires a config change. The normal method would be config in Dev, followed by unit testing. Transport to QA for integration testing. Finally transport to Prod.
Would this transport go through b/c the config has nothing to do with the new business functions activated or would the transport not move to QA b/c the same BFs were not active in QA that were in Dev?
Hope this helps clarify. It seems SAP would never "back you in a corner" like that and the transport should go through, but I've seen stranger things happen!
Thanks again!
CK

To Activate Business Function FI

Dear Experts,
We are implementing BI. We are in need of activating below business functions for Vender, Asset reports etc. in BI
FIN_REP_SIMPL_1
FIN_REP_SIMPL_2
FIN_REP_SIMPL_3
Can you kindly guide us the dependent FI business functions related to above each BF. I have found certain info. regarding the dependent BF. which are not activated so far. Those are mentioned below. (Further We are on EHP 5 & activated New GL).
FIN_GL_CI_1
FIN_GL_CI_2
FIN_GL_CI_3
and if you got any idea about the risk involved, appreciate your advise as well
Best Regards,
Thuwan

Hi Thuwan,
In transaction SFW5 (where you activate Business Functions) there is column "Dependencies".
from what I can see in your case the only dependecy is: FIN_REP_SIMPL_2 must be activated if you want to activate FIN_REP_SIMPL_3.
I don't think there is much risk in activating those business functions. They just give you additional FI reports in BI.
Regards,
Szymon

Business Functions for EHP 4 and EHP 5

Hi Friends,
We are planning to implement LSO, ECM, Travel, PMS and E Recruitment.
What are all the business functions available in EHP4 and EHP5 for these modules.
Please help me with your inputs.
Thanks,
Charle

Hello Charle,
Following are the business functions available :
HCM_ECM_CI_1     For ECM EHp4
HCM_ECM_CI_2     For ECM EHp5
HCM_ERC_CI_2      For EREC EHp4
HCM_ERC_CI_3     FOR EREC EHP4
HCM_ERC_CI_4       For EREC EHP5
HCM_ERC_SES_1   For Search in EREC
HCM_OSA_CI_1     For Performance Managemt EHP4
HCM_OSA_CI_2     For Performance Managemt EHP5
HCM_LSO_CI_2   For LSO EHP4
HCM_LSO_CI_3 For LSO EHP5
These are BF, which you are looking for, you can get more information on help.sap.com
Best Regards,
Deepak.

Business Functions For Empty and DSD

Hi
We have installed ECC 6 at one of our client and the client's business is related to Beverage Industry and in order to use the functionalities of Empties and DSD we want to be sure about ECC Business Functions available for the Beverage Industry. Kindly reply with the related Business Functions available and need to be activated for Empties and DSD.
Regards,

Hello Charle,
Following are the business functions available :
HCM_ECM_CI_1     For ECM EHp4
HCM_ECM_CI_2     For ECM EHp5
HCM_ERC_CI_2      For EREC EHp4
HCM_ERC_CI_3     FOR EREC EHP4
HCM_ERC_CI_4       For EREC EHP5
HCM_ERC_SES_1   For Search in EREC
HCM_OSA_CI_1     For Performance Managemt EHP4
HCM_OSA_CI_2     For Performance Managemt EHP5
HCM_LSO_CI_2   For LSO EHP4
HCM_LSO_CI_3 For LSO EHP5
These are BF, which you are looking for, you can get more information on help.sap.com
Best Regards,
Deepak.

Business Functions Switch to activate Enhancement Package 4

Hi SAP experts,
can you help me?...
We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP, but I've been looking for information to know which Business Functions (switch) we need to activate for this scenario, but in all documentation I've been looking doesn't indicate this.
Can you let me know wich switches we need to activate or share documentation about this?
Your help is most highly appretiated.
Regards
Gonzalo C.

> We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP,
So there was any business reason to install EHP4? Who told you? And those people should also be able to tell you what to activate
I'd go through SFW5 and click the "documentation" button next to the functions, this will open a browser window explaining what this function is about.
Markus

EHP4 - Business Function - FIN_REP_SIMPL_2

Similar Messages

Maybe you are looking for