EHP5 - Dump in WD ABAP form link in Portal

Hi Experts,
EHP5 has been upgraded in Portal.
Now whenever we are clicking any WD ABAP form link in Team Dashboard we are getting the following dump------
'An exception occurred that was caught'.
When we debugged the WD ABAP code we found the error in 'runtime->execute()' in the standard mehod 'Handle_Request()
in the standard class 'CL_WDR_CLIENT_ABSTRACT_HTTP' .
When EHP4 was there we were not getting such error but after the upgrdation of EHP5 we are getting this kind of dump.
Can you please provide the solution to resolve such kind of dump in EHP5?
Regards,
Anindita

Does it crash when "arriving" at the method and trying to execute the implementation (bad parameters?) or does it crash with in the handle_request itself? If it crashes within the method, can you debug to the point where the dump actually occurs?
Cheers, Lukas

Similar Messages

Assertion Failed - Dump when clicking on the links from Portal for WD Comp

Hi,
We have a WD Component which is integrated to the Portal . When we click on the link in the Portal for the first 2 times, the selection screen is shown correctly ( when debugged, the program stops in WDDOINIT method before the sel.screen is shown).
When we click on the link for the third or fourth time with no time gap, it shows a dump. This is the dump I am getting.
Runtime Errors         ASSERTION_FAILED
Date and Time          01/06/2011 10:13:58
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_NW7_VIEW_ELEMENT_ADAPTER===CP" or "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004"
"DISPATCH_NW7_EVENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 010
User................ "STECURRY"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4D250E9ADDFB00BDE10080000A041004"
Program............. "CL_NW7_VIEW_ELEMENT_ADAPTER===CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTPS" Connection:
Plug-in Type.......... "HTTPS"
Caller IP............. "10.6.4.220"
Caller Port........... 443
Universal Resource Id. "/sap/bc/webdynpro/sap/ZEM_INV_APP_ASSIGNMENTS/"
Information on where terminated
Termination occurred in the ABAP program "CL_NW7_VIEW_ELEMENT_ADAPTER===CP" -
in "DISPATCH_NW7_EVENT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 5
of the (Include) program "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004".
Source Code Extract
Line
SourceCde
1
METHOD dispatch_nw7_event.
2
DATA: l_event_handler TYPE REF TO if_wdr_nw7_event_handler.
3
4
l_event_handler = get_nw7_event_handler( i_event_handler_id ).
>>>>>
assert l_event_handler is not initial.
6
7
" View-based Delta Rendering: tracking of client events
8
raise event on_nw7_handle_event
9
exporting
10
event_handler = l_event_handler
11
event_name    = i_event_name.
12
13
14
l_event_handler->handle_event(
15
i_event_name       = i_event_name
16
i_event_parameters = i_event_parameters
17
i_update_data      = i_update_data
18
i_event_queue      = i_event_queue ).
19
ENDMETHOD.
- I have cut the dump to make it short and clear.
One of my colleague ran a HTTP watch trace and I am attaching it as well.
<body> <table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td> <h1> Error when processing your request </h1> <br> <h2> What has happened? </h2> <p> The URL https://uswasspq.deloitte.com:/sap/bc/webdynpro/sap/ZEM_INV_APPROVER_MAIN//ucfLOADING was not called due to an error. </p> </td> </tr> <tr> <td> </td> </tr> <tr> <td class="emphasize"> <strong> Note </strong> <br> <ul> <li> The following error text was processed in the system SPQ : <b> User session (HTTP/SMTP/..) closed after timeout </b> </li> </ul> <ul> <li> The error occurred on the application server usuxc204_SPQ_01 and in the work process 1 . </li> </ul> <ul> <li> The termination type was: ERROR_MESSAGE_STATE </li> </ul> <ul> <li> The ABAP call stack was: <br> Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP<BR>Method: IF_HTTP_EXTENSIONHANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP<BR>Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP<BR>Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME<BR>Module: %_HTTP_START of program SAPMHTTP<BR> </li> </ul> </td> </tr> <tr> <td> </td> </tr> <tr> <td> <p> </p> <h2> What can I do? </h2> <ul> <li> If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SPQ in transaction ST22. </li> </ul> <ul> <li> If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server usuxc204_SPQ_01 in transaction SM21. </li> </ul> <ul> <li> If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server usuxc204_SPQ_01 . In some situations, you may also need to analyze the trace files of other work processes. </li> </ul> <ul> <li> If you do not yet have a user ID, contact your system administrator. </li> </ul> <br/> <p class="note"> Error code: ICF-IE-https -c: 010 -u: STHUGHES -l: E -s: SPQ -i: usuxc204_SPQ_01 -w: 1 -d: 20110208 -t: 131808 -v: ERROR_MESSAGE_STATE -e: User session (HTTP/SMTP/..) closed after timeout </p> <br/> <p> HTTP 500 - Internal Server Error <br/> <p> Your SAP Internet Communication Framework Team </p> </td> </tr> </table> </body> </html>
After this error a URL is called form the WebDynpro to the following html page.
https://uswasspq.deloitte.com/sap/bc/webdynpro/sap/zem_inv_approver_main/dps_Error_Page.html ( this is the friendly message we have put so that the user does not see the dump on his screen.
I tried invalidating the nodes in the WDDOEXIT at the view level but it did not help. This is a show stopper for the project to go live.
Thanks,
Guru.

Hi Guru,
It is not readable the way you posted and that might be the reason that you do not get reactions.
Can you please confirm the following.
1. Is this problem occurs with out portal when you run the application standalone in SAP GUI.
2. What is going on wddoinit method or wddomodify method, any resource handling there ?

NW04 Testdrive Dump when using ABAP Webservice whizard

Hello,
I have NW4 running on FC5.
When I try to create a webservice in SE80 the whizard dumps:
Runtime Errors         GEN_NO_GENINFO_FOR_DATID
       Occurred on     21.02.2008 at   10:08:16
No generation information for DATID "%_#D18404".
What happened?
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program "CL_SWF_CNT_FACTORY============CP".
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
There is no generation information for the internal ID "%_#D18404".
This is most probably due to an
invalid DATID or an object type for which there is usually
no generation information.
Possible causes for the error are:
- an RSYN programming error
- the following internal constants were used
%_ENDIAN, %_CHARSIZE, %_MINCHAR, %_MAXCHAR, %_HORIZONTAL_TAB,
%_VERTICAL_TAB, %_NEWLINE, %_CR_LF, %_FORMFEED, or %_BACKSPACE
For optimization reasons, no generation information is created for these
constants. Therefore these constants can generally only be used with
the VALUE specification of DATA, CONSTANTS etc.
How to correct the error
Use the Transaction SYNT to search for the error.
System environment
SAP Release.............. "640"
Application server....... "BLN787"
Network address.......... "192.168.100.2"
Operating system......... "Linux"
Release.................. "2.4.22-1.2129.nptlsm"
Hardware type............ "i686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "BLN787"
Database type............ "ADABAS D"
Database name............ "NW4"
Database owner........... "SAPNW4"
Character set............ "en_US.ISO-8859-1"
SAP kernel............... "640"
Created on............... "Jan 13 2004 20:13:34"
Created in............... "Linux 2.4.18-64GB-SMP
#1_SMP_Wed_May_15_13:27:16_GMT_2002 i686"
Database version......... "SAPDB 7.4.3.029 "
Patch level.............. "1"
Patch text............... " "
Supported environment....
Database................. "SAP DB 7.4.3, MySQL MaxDB 7.5.0"
SAP database version..... "640"
Operating system......... "Linux 2.2, Linux 2.4"
Memory usage.............
Roll..................... 8112
EM....................... 15679560
Heap..................... 0
Page..................... 49152
MM Used.................. 6768560
MM Free.................. 546564
SAP Release.............. "640"
User, transaction...
Client.............. 000
User................ "DEVELOPER"
Language key........ "E"
Transaction......... " "
Program............. "CL_SWF_CNT_FACTORY============CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
The termination occurred during generation of the ABAP program
"CL_SWF_CNT_FACTORY============CP".
The point of termination was in line 64 of the ABAP source code of the
(Include) program "CL_SWF_CNT_FACTORY============CCIMP".
of the program "CL_SWF_CNT_FACTORY============CCIMP" (when calling the editor
640).
Source code extract
000340
000350   **** Test methods. Use TA SE80 or RS_AU_LIGHT for complete test.
000360
000370
000380   **** Test METHOD test_instance_manager_state
000390     METHOD test_instance_manager_state.
000400       DATA:
000410         l_abap_rh1      TYPE swfrcntref, "cont IF reference
000420         l_abap_rh2      LIKE l_abap_rh1,
000430
000440         l_inst_manager_state    TYPE xfeld,
000450         l_num_requests          TYPE i,
000460         l_num_hits              TYPE i,
000470         l_num_misses            TYPE i,
000480         l_cache_size            TYPE i,
000490         l_last_reset            TYPE timestamp,
000500         l_non_expected_ifs_cx TYPE REF TO cx_swf_ifs_exception.
000510   **** container manager is expected to be active
000520       CONSTANTS l_expected_inst_manager_state TYPE xflag VALUE 'X'.
000530   **** is the container instance manager currently active ?
000540       TRY.
000550           CALL METHOD cl_swf_cnt_factory=>create_method_container
000560             EXPORTING
000570               im_objtype          = 'CL_SWF_CNT_FACTORY'
000580               im_catid            = 'CL'
000590               im_method           = 'CREATE'
000600             IMPORTING
000610               ex_method_container = l_abap_rh1.
000620         CATCH cx_swf_ifs_exception INTO l_non_expected_ifs_cx.
000630       ENDTRY.
>       cl_aunit_assert=>assert_not_bound( l_non_expected_ifs_cx ).
000650
000660       TRY.
000670           CALL METHOD cl_swf_cnt_factory=>query_create_buffer
000680             IMPORTING
000690               ex_inst_manager_state = l_inst_manager_state
000700               ex_num_requests       = l_num_requests
000710               ex_num_hits           = l_num_hits
000720               ex_num_misses         = l_num_misses
000730               ex_last_reset         = l_last_reset
000740               ex_num_cache_entries = l_cache_size.
000750         CATCH cx_swf_ifs_exception INTO l_non_expected_ifs_cx.
000760       ENDTRY.
000770       cl_aunit_assert=>assert_not_bound( l_non_expected_ifs_cx ).
000780
000790   **** check status of instance manager
000800       cl_aunit_assert=>assert_equals( act = l_inst_manager_state
000810                                        exp = l_expected_inst_manager_state
000820                                  msg = 'METHOD' &             "#EC NOTEXT
000830      'test_instance_manager_state:' & 'check instance manager state' ).
Contents of system fields
SY field contents..................... SY field contents.....................
Active calls / events
No dump information available
Chosen variables
No dump information available
Application Calls
No dump information available
Application Information
No dump information available
Internal notes
The termination occurred in the function "cg_GetSdatPtr" of the SAP
Basis System, specifically in line 2918 of the module
"//bas/640_REL/src/krn/gen/cgen.c#6".
The internal operation just processed is " ".
The internal session was started at 20080221100749.
Active calls in SAP kernel
(LinStack+0x3e)[0x81ed7ce]
(CTrcStack2+0x59)[0x81ed439]
(CTrcStack+0x21)[0x81ed3d1]
(rabax_CStackSave__Fv+0x9f)[0x857ac4f]
(ab_rabax+0x400)[0x8571db0]
(cg_GetSdatPtr__FPc+0x7e)[0x87523de]
(cg_cbindex__FPc+0x18)[0x8752408]
(sc_scont_short+0x86)[0x874d996]
(rs_expan_abap+0x51cff)[0x886210f]
(sc_expan__FUi+0xcf)[0x872e23f]
(parse__FUiPi+0x479)[0x8726fc9]
(sc_check+0x1bd)[0x872573d]
(ProcessText__FUi+0x6a)[0x872556a]
(sc_check+0x15c)[0x87256dc]
(sc_inclu+0x6e2)[0x871f142]
(rs_oper_abap2129+0x8e)[0x894d79e]
(rs_expan_abap+0x8f618)[0x889fa28]
(sc_expan__FUi+0xcf)[0x872e23f]
(parse__FUiPi+0x479)[0x8726fc9]
(sc_check+0x1bd)[0x872573d]
(cg_generate+0x9df)[0x8757c2f]
(ab_gabap+0x9f)[0x850c85f]
(dy_gen+0x45c)[0x82473ac]
(ab_genprog__FPcPvUii+0x487)[0x850c187]
(newload__FPcP13TmpSubpoolDirUi+0x29e)[0x8355b2e]
(ab_LoadProg__FPcUi+0x152)[0x8355752]
(LoadGlobalClass__FPCcUiUiUi9ClasState+0xcd)[0x83a06dd]
(FillCfixInt__FPC4CREFP4CFIXUiUi9ClasState+0x19f)[0x83a1bff]
(ab_FillCfix__FUsUi+0x23c)[0x83a263c]
(ab_CrefToCladId_ActivateOK__FUsPUc+0x4c)[0x83a26fc]
(ab_jclcc__Fv+0x26)[0x84190c6]
(ab_extri__Fv+0x9c9)[0x831e9b9]
(ab_xevent__FPCc+0x20)[0x8457f10]
(ab_dstep+0x775)[0x8582d55]
(dynpmcal+0x89b)[0x823e83b]
(dynppbo0+0x2a8)[0x823bb88]
(dynprctl+0x62e)[0x823b5fe]
(dynpen00+0x2db0)[0x8239160]
(Thdynpen00+0x6f6)[0x80d1916]
(TskhLoop+0x3bdf)[0x80d0c6f]
(tskhstart+0x27b)[0x80c964b]
(DpMain+0x26c)[0x805af9c]
(main+0x16)[0x80595a6]
/lib/libc.so.6(__libc_start_main+0xbf)[0x41dbbbaf]
List of ABAP programs affected
No dump information available
List of internal tables
No dump information available
Directory of Application Tables
No dump information available
Directory of Application Tables (Administrative Information)
No dump information available
ABAP control blocks CONT
No dump information available
End of runtime analysis
Has anyone come across this and knows how to fix it?
Thanks
Matthias

Hi,
without service.sap.com access you can not download kernel patch.
any way what is you current kernel version.?
you can get this by login into sap system, system -> status -> other kernel info. (shift + F5)
regards,
kaushal

FAQ's, intros and memorable discussions in the ABAP Form Printing Forum

Welcome to the SDN ABAP Form Printing Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.
Form Printing
Exporting Graphics from SAP => Download Logo from SE78, except WS_DOWNLOAD has been replaced (see the docs).
How to check via report if a graphic exist in SE78. => Validating the existence of a graphic from ABAP.

Welcome to the SDN ABAP Form Printing Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.
Form Printing
Exporting Graphics from SAP => Download Logo from SE78, except WS_DOWNLOAD has been replaced (see the docs).
How to check via report if a graphic exist in SE78. => Validating the existence of a graphic from ABAP.

ORACLE EXPRESS: build a page with multiple forms linked to one table

hi,
im using oravle application express. APEX
i would like to build a page with multiple forms linked to one table (orders) , the page has 4 from each one with different order_id number (depending on filtering), and if the order is prepared click yes for each order and this 'YES' should be UPDATED AND SAVED to each order number in the same table with the press of one button.
i created all the form as (sql query)
and create one update process
(UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_1
WHERE ORDER_ID =:P10_ORDER_ID_1;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_2
WHERE ORDER_ID =:P10_ORDER_ID_2;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_3
WHERE ORDER_ID =:P10_ORDER_ID_3;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_4
WHERE ORDER_ID =:P10_ORDER_ID_4;
i dont know really if i can do that, but it appear hat it actually saving according to order_id number , but not all the time some time it saved the value as "null".
please guide me what is the correct way to do this.
I READ THIS ONE
http://stackoverflow.com/questions/7877396/apex-creating-a-page-with-multiple-forms-linked-to-multiple-related-tables
BUT IT WAS FOR MULTIPLE INSERT
thanks.

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

Why can I not open the web form link in ms outlook

I copied a link to my web form to ms outlook recipients. They cannot open the link.

Are all the recipients using Outlook? Which version? Can they open any other web links from Outlook? Could you send me a copy of the form link to [email protected]?

Why does the form link show up in 2 pages, but when I save the form as PDF it comes up as 3 pages?

A few weeks ago, I asked the above question on why the form link shows up in 2 pages, but when the form is saved as PDF it comes up as 3 pages.
The answer I received was that I can simply select the page break and hit "delete" button or click on the trash can icon at the top right corner.
I tried to do this but, there is NO OPTION to select the page break and hit delete….
I want to combine the page on my PDF because the header takes up one entire page.
How can I do this? Can someone please help or walk me through this live?

Wenlam,
There is NO OPTION to select the page break and hit delete….
Please see.
I want to combine these page because the header takes up one entire page.
How can I do this?
Trent
Thank you,
Trent
Trent R. Smock
602.359.2685
You want to improve? Interrupt your "old patterns."
Do something different.

How to insert an Active X control in a ABAP form

Hi All,
I am learner, want to embed an Active X control in ABAP form, and how can i communicate from Active X control to ABAP form. if you refer screen shots it will be great.
Thanks & Regards
Chandra

check this weblog.
<a href="https://weblogs.sdn.sap.com/pub/wlg/995">Using Classic ActiveX Controls in the ABAP Control Framework</a>
In future kindly post ABAP related questions in ABAP forum.
Raja

Webdynpro ABAP- Reference Links- Articals are not opening

hi all
in SDN-Webdynpro abap
Webdynpro ABAP->Reference Links->Articals are not opening any another way to open all these articals??
thank u
krishna.

hi,
Try this one :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdabap/referencesandLinks
Thanx.

Unable to open form links from ie7

Hi,
apps:11.5.10.2
db: 11gR2
os:win2003
After database was upgraded to 11gr2, couple accounting department desktops (xp sp3 ) could not open SOME forms from ie7,
there was NO problem before upgrade.
1. Some forms can be opened and other can not be open after click. Turned on client java debug, trace option, nothing show up there after click
a form link. There are bunch of msg with working forms.
2. No errors I can find in apache access_log and error_log from these desktop IP.
3. I tried install newest version of Firefox on the desktop, it works beautiful and sleek.
4. I tried from other xp desktops, it works fine.
5. I tried from my laptop (win7+ie9), it works fine.
I did check out Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 [ID 393931.1]
look for "Forms Launch Issues", no luck.
It got be something special on these two desktops, I have tried to clean ie cache, java cache, or even remove application data -sun folder, etc.
any body can help me or give me some hints?
I can turn on apache debug option on server to figure out what it is wrong (may be), but I would like a quick answer from anybody
has similar issue.
thanks
DW

Thanks Helio for reply.
There were something wrong with IE7 and Java JRE. The javaScript:Launchform under the links just would not launch jre and in turn to launch form. It was strange that some links
worked and some don't, after cleaned up IE cache, cookies, etc., the links that did not work before then worked and the ones that worked become not working. I restored the
whole XP box and IE7, then it works fine now.
I have another desktop has the similar problem, I removed and restored SP3 (XP) and IE7 instead of restore the whole box, it works fine.
IE is getting sucks, I have tried FF and Chrome on the same box, they were all worked great but IE7. I have tried many tricks I can found on IE7 and Java, none helps.
DW

Oracle portal forms, links, reports relation table

I have an oracle portal form.this is has been used by portal Link and this link has been used in portal report.
Present I know only portal Form name but no idea about which link uses and which report uses this link..
Is there any way I can find out the portal links and reports names based on form name which I know..Please help me with this..
I am under impression that, there may be some portal system table/view which will have dependcies of all the forms ,links and reports information...
Please let me know system table name.I couldn't search in metalink since I don't have access
Thx
Lakshmi.V

Identity Management and SSO are not installed, why they are used for?IDM and SSO is used for user authentication.
You can search for details about that.
>
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.the port which you have mentioned is it WLS_FORMS_PORT or any other.
Try running default Forms port WLS_FORMS_PORT that will be 9001
or check for the WLS_FORMS_PORT in the portlist.ini file.
Also are you getting any exception in the Java console.?

Form Link

Hi
I am new-ish to apex and have just taken on the maintenance of an application.
One page of the application has a form link where you can add rows to a little table.
All i can see in the page definition is a reference to the form link but i cant see where it is linked to or where it is getting any of its information from.
The Add Row button in the form link isnt working, it wont add a row :)
any ideas?
Thanks in advance

Hi,
Not much to go on, but...
What is the "link"? Is it a button? Is it an "A" tag? Is it a column in a report?
If it is a button, there should either be a URL defined on the button or the button should trigger a Branch that is defined on the page.
If it is a URL, then the syntax for that is: f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
So, the second parameter, "Page", will tell you where the link is pointing to.
If it is a button that triggers a branch, the branch will tell you the page that the user will be directed to.
If it is a column in a report, the "Link" settings for the Column Attributes for that column will show you either the URL or the page
Andy

Is there a way to customize the web form link in Adobe FormsCentral?

The dedicated link has a quite complicated address, not easily added to brochures to hand out. Is there a way to customize the web form link in Adobe FormsCentral?

It cannot be customized. The workaround is to create your own web page and embed our form into it. That way they only see your URL.
Randy

Form link does not appear in email notification.

Form link does not appear in email notification
We have added a custom notification to the OM workflow process. The notification itself has a form attribute which provides a link to the sales order form. This works fine when notification is viewed via worklist - notifications within apps. The link does not appear in the email notification.
Is there any alternate way to provide a form link to Oracle Applications form that can be accessed via email (after logging into application, if the user is not logged in).
Thanks

Similar functionality is available in PO and Req Approval process. Can you take a look at the PO Approval Process workflow? I remember the email notification does show the link, which is a URL link and has parameters in it. This functonality provides where the approvers need to modify the document which is requested to be approved. So they can click on the link, modify and close and approve if necessary.
Are you expecting them to modify the same or you just want to show query only screen?
There is a webpage available to see order information called Order Information (user Order Information User resp). You can send parameters to that webpage and that should show login page opening up a seperate session with all the parameters in the URL. Once logged in that should show order information.
Thanks
Nagamohan

'success.gif' and 'Back to form' Link.

Hi there,
we created a form which calls a stored procedure on submission. The procedure
does a few selects and displays the results in a colored table, similar to the
Oracle eMail Server Calendar, as HTML-page using the htp.* tags. The problem
now is that at the very bottom of the page there is always the success icon and
'Back to form' link visible. How can we get rid of this behaviour?
Thanks.

Hi,
In the successful submission area of the form write code to redirect to someother place.
Example
declare
l_url varchar2(4000);
begin
l_url := 'http://.....';
go(l_url);
go('portal.home');
end;
Thanks,
Sharmila

EHP5 - Dump in WD ABAP form link in Portal

Similar Messages

Maybe you are looking for