EJB JAR Versioning

I am using jdk version 1.3.1_02.
How I can know which version of EJB JAR I need to use (1.1, 2.0, 2.1) sam for JTA JAR file.
I looked in the JAR's documents and I couldn't find a word about versioning comptability.
Thank you.

The J2EE version (or appropriate sub-set) must be compatible with what the application server supports - the JDK version does not (necessarily) have anything to do with it.

Similar Messages

  • Weblogic 10.3.0 Deployment error when using ejb-jar.xml

    Hi,
    I am getting the following error while deploying my EJB3 application on Weblogic 10.3.0. This is happening only if I include ejb-jar.xml.
    As per the EJB3 descriptor spec, Remote Home or Local home are not exists.
    Is this a issue in Weblogic 10.3.0 or am I missing any special setup ?
    Please help.
    weblogic.application.ModuleException: Exception preparing module: EJBModule(egm-poc.jar)
    Unable to deploy EJB: C:\appsrv\domains\WeblogicRS1.1-domain\servers\admin\tmp\_WL_user\_appsdir_egmear_ear\ot2591\egm-poc.
    jar from egm-poc.jar:
    In EJB JPATestBean, both the remote home and remote component interface must be specified. Currently, only one of them is spec
    ified.
    at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
    My ejb-jar.xml is
    - <ejb-jar version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd">
    <description>JPA Test Application</description>
    <display-name>JPATest</display-name>
    - <enterprise-beans>
    - <session>
    <ejb-name>JPATestBean</ejb-name>
    <remote>egm.poc.jpa.JPATestBeanRemote</remote>
    <local>egm.poc.jpa.JPATestBeanLocal</local>
    <ejb-class>egm.poc.jpa.JPATestBean</ejb-class>
    <session-type>Stateless</session-type>
    <transaction-type>Container</transaction-type>
    </session>
    - <session>
    <ejb-name>AuditInfoDAOH</ejb-name>
    <local>egm.poc.jpa.Audit</local>
    <ejb-class>egm.poc.jpa.AuditInfoDAOH</ejb-class>
    <session-type>Stateless</session-type>
    <transaction-type>Container</transaction-type>
    </session>
    </enterprise-beans>
    - <assembly-descriptor>
    - <container-transaction>
    - <method>
    <ejb-name>JPATestBean</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>RequiresNew</trans-attribute>
    </container-transaction>
    - <container-transaction>
    - <method>
    <ejb-name>AuditInfoDAOH</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    </assembly-descriptor>
    </ejb-jar>
    Regards
    Saji

    Hi,
    Seems the issue is not common. Can anyone throw some light on this ?
    Regards
    Saji

  • Sample weblogic-ejb-jar.xml for Resource-ref EJB 3.0

    I am trying to create an MDB that can be re-used under different names.
    @MessageDriven(description = "An MDB that transfers messages from one Queue to another", activationConfig = { @ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue") })
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    public class TransferMdb implements MessageListener {
    private static final Logger LOG = Logger.getLogger(TransferMdb.class);
    @Resource(name = "jms/connfactory")
    private ConnectionFactory connectionFactory;
    @Resource(name = "jms/targetDestination")
    private Queue targetDestination;
    <ejb-jar version="3.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_3_0.xsd">
    <enterprise-beans>
    <message-driven>
    <ejb-name>TransferMdb</ejb-name>
    <ejb-class>TransferMdb</ejb-class>
    </message-driven>
    </enterprise-beans>
    </ejb-jar>
    <weblogic-ejb-jar>
    <weblogic-enterprise-bean>
    <ejb-name>TransferMdb</ejb-name>
    <message-driven-descriptor>
    <pool>
    <max-beans-in-free-pool>200</max-beans-in-free-pool>
    <initial-beans-in-free-pool>5</initial-beans-in-free-pool>
    </pool>
    <destination-jndi-name>test_queue</destination-jndi-name>
    <transaction-descriptor>
    <trans-timeout-seconds>20</trans-timeout-seconds>
    </transaction-descriptor>
    </message-driven-descriptor>
    <reference-descriptor>
    <resource-description>
    <res-ref-name>jms/connectionfactory</res-ref-name>
    <jndi-name>connectionfactory</jndi-name>
    </resource-description>
    <resource-description>
    <res-ref-name>jms/targetDestination</res-ref-name>
    <jndi-name>reply_queue</jndi-name>
    </resource-description>
    </reference-descriptor>
    </weblogic-enterprise-bean>
    </weblogic-ejb-jar>
    However when I deploy the above, I get exceptions such as:
    problem: cvc-complex-type.2.4a: Expected elements 'initial-context-factory@http://www.bea.com/ns/weblogic/weblogic-ejb-jar provider-url@http://www.bea.com/ns/weblogic/weblogic-ejb-jar connection-factory-jndi-name@http://www.bea.com/ns/weblogic/weblogic-ejb-jar jms-polling-interval-seconds@http://www.bea.com/ns/weblogic/weblogic-ejb-jar jms-client-id@http://www.bea.com/ns/weblogic/weblogic-ejb-jar generate-unique-jms-client-id@http://www.bea.com/ns/weblogic/weblogic-ejb-jar durable-subscription-deletion@http://www.bea.com/ns/weblogic/weblogic-ejb-jar max-messages-in-transaction@http://www.bea.com/ns/weblogic/weblogic-ejb-jar distributed-destination-connection@http://www.bea.com/ns/weblogic/weblogic-ejb-jar use81-style-polling@http://www.bea.com/ns/weblogic/weblogic-ejb-jar init-suspend-seconds@http://www.bea.com/ns/weblogic/weblogic-ejb-jar max-suspend-seconds@http://www.bea.com/ns/weblogic/weblogic-ejb-jar security-plugin@http://www.bea.com/ns/weblogic/weblogic-ejb-jar' instead of 'transaction-descriptor@http://www.bea.com/ns/weblogic/weblogic-ejb-jar' here in element message-driven-descriptor@http://www.bea.com/ns/weblogic/weblogic-ejb-jar:<null>
    problem: cvc-complex-type.2.4a: Expected elements 'transaction-descriptor@http://www.bea.com/ns/weblogic/weblogic-ejb-jar iiop-security-descriptor@http://www.bea.com/ns/weblogic/weblogic-ejb-jar resource-description@http://www.bea.com/ns/weblogic/weblogic-ejb-jar resource-env-description@http://www.bea.com/ns/weblogic/weblogic-ejb-jar ejb-reference-description@http://www.bea.com/ns/weblogic/weblogic-ejb-jar service-reference-description@http://www.bea.com/ns/weblogic/weblogic-ejb-jar enable-call-by-reference@http://www.bea.com/ns/weblogic/weblogic-ejb-jar network-access-point@http://www.bea.com/ns/weblogic/weblogic-ejb-jar clients-on-same-server@http://www.bea.com/ns/weblogic/weblogic-ejb-jar run-as-principal-name@http://www.bea.com/ns/weblogic/weblogic-ejb-jar create-as-principal-name@http://www.bea.com/ns/weblogic/weblogic-ejb-jar remove-as-principal-name@http://www.bea.com/ns/weblogic/weblogic-ejb-jar passivate-as-principal-name@http://www.bea.com/ns/weblogic/weblogic-ejb-jar jndi-name@http://www.bea.com/ns/weblogic/weblogic-ejb-jar local-jndi-name@http://www.bea.com/ns/weblogic/weblogic-ejb-jar dispatch-policy@http://www.bea.com/ns/weblogic/weblogic-ejb-jar remote-client-timeout@http://www.bea.com/ns/weblogic/weblogic-ejb-jar stick-to-first-server@http://www.bea.com/ns/weblogic/weblogic-ejb-jar' instead of 'reference-descriptor@http://www.bea.com/ns/weblogic/weblogic-ejb-jar' here in element weblogic-enterprise-bean@http://www.bea.com/ns/weblogic/weblogic-ejb-jar:<null>
    at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
    at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
    at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
    at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
    Truncated. see log file for complete stacktrace
    I am clearly missing items in the weblogic-ejb-jar.xml. If anyone has a sample or tips, that would be awesome as a starting point.

    Those tags just declare that you are using our CMP provider and that
    your descriptor is in META-INF/weblogic-cmp-rdbms-jar.xml.
    FWIW, you might also want to check out EJBGen. It tends to keep more up
    to date with WLS than xdoclet.
    -- Rob
    Gen wrote:
    I am using xdoclets to generate descriptor file weblogic-ejb-jar.xml
    for a BMP entity bean. Xdoclet is generating the descriptor file
    alright, but is putting the following extra tags. This happens even
    for samples which come with the download, so my tags in java file are
    not wrong.
    My question is, are the extra tags below harmless, or should I
    manually go to each desciptor file and remove them?
    Thanks.
    ----------- EXTRA TAGS GENERATED START ---------
    persistence> <persistence-type>
    <type-identifier>WebLogic_CMP_RDBMS</type-identifier>
    <type-version>6.0</type-version>
    <type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
    </persistence-type>
    <persistence-use>
    <type-identifier>WebLogic_CMP_RDBMS</type-identifier>
    <type-version>6.0</type-version>
    </persistence-use>
    </persistence>
    ----------- EXTRA TAGS GENERATED END ---------
    ----------- TAGS I PUT IN JAVA CLASS START --------
    * @ejb:bean name="com.ejb.entity.Customer"
    * jndi-name="com.ejb.entity.CustomerHome"
    * view-type="remote"
    * type="BMP"
    * primkey-field="com.ejb.entity.CustomerPK"
    * reentrant="false"
    * @weblogic:cache
    * max-beans-in-cache="1000"
    * read-timeout-seconds="900"
    * concurrency-strategy="ReadOnly"
    ----------- TAGS I PUT IN JAVA CLASS END --------

  • How to access additional supporting jar files from EJB JAR?

    Hi,
    How can we access additional supporting jar files as part of my EJB JAR .
    I don't want to keep them in the top level because other EJB JAR files also has
    the same jar files(code in the classes in the jar is slightly different)
    can I keep the additional jar files in my EJB JAR?
    Thanks
    NLB

    Include the supporting jar files in the Ejb jar file.
    Specifiy the jar files in the Ejb jar manifest file.
    Manifest-Version: 1.0 [CRLF]
    Class-Path: utility.jar [CRLF]
    thanks,
    Deepak
    "NLB" <[email protected]> wrote:
    >
    Hi,
    How can we access additional supporting jar files as part of my EJB JAR
    I don't want to keep them in the top level because other EJB JAR files
    also has
    the same jar files(code in the classes in the jar is slightly different)
    can I keep the additional jar files in my EJB JAR?
    Thanks
    NLB

  • Failed to load weblogic-ejb-jar.xml

    Hi,
    I try to deploy an EJB on Weblogic 9.1, but the weblogic-ejb-jar seems to cause this exception :
    ======================================================
    [wlappc] <30 oct. 2006 12 h 13 CET> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile your application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
    [wlappc] com.bea.xml.XmlException: failed to load java type corresponding to e=weblogic-ejb-jar@http://www.bea.com/ns/weblogic/910
    [wlappc] at com.bea.staxb.runtime.internal.UnmarshalResult.getPojoBindingType(UnmarshalResult.java:325)
    [wlappc] at com.bea.staxb.runtime.internal.UnmarshalResult.determineTypeForGlobalElement(UnmarshalResult.java:292)
    [wlappc] at com.bea.staxb.runtime.internal.UnmarshalResult.determineTypeForGlobalElement(UnmarshalResult.java:302)
    [wlappc] at com.bea.staxb.runtime.internal.UnmarshalResult.determineRootType(UnmarshalResult.java:283)
    [wlappc] at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:153)
    [wlappc] at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
    [wlappc] at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:138)
    [wlappc] at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:271)
    [wlappc] at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:240)
    [wlappc] at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:300)
    [wlappc] at weblogic.application.descriptor.AbstractDescriptorLoader.createDescriptor(AbstractDescriptorLoader.java:344)
    [wlappc] at weblogic.application.descriptor.CachingDescriptorLoader.createDescriptor(CachingDescriptorLoader.java:188)
    [wlappc] at weblogic.application.descriptor.AbstractDescriptorLoader.createDescriptor(AbstractDescriptorLoader.java:328)
    [wlappc] at weblogic.application.descriptor.AbstractDescriptorLoader.getDescriptor(AbstractDescriptorLoader.java:237)
    [wlappc] at weblogic.application.descriptor.AbstractDescriptorLoader.getRootDescriptorBean(AbstractDescriptorLoader.java:217)
    [wlappc] at weblogic.ejb.spi.EjbJarDescriptor.parseWeblogicEjbJarBean(EjbJarDescriptor.java:171)
    [wlappc] at weblogic.ejb.container.dd.xml.DDUtils.processWLEjbJarXMLWithSchema(DDUtils.java:706)
    [wlappc] at weblogic.ejb.container.dd.xml.DDUtils.parseWLDD(DDUtils.java:535)
    [wlappc] at weblogic.ejb.container.dd.xml.DDUtils.createDescriptorFromJarFile(DDUtils.java:358)
    [wlappc] at weblogic.ejb.container.dd.xml.DDUtils.createReadOnlyDescriptorFromJarFile(DDUtils.java:141)
    [wlappc] at weblogic.ejb.container.ejbc.EJBCompiler.parseDescriptors(EJBCompiler.java:1345)
    [wlappc] at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:431)
    [wlappc] at weblogic.application.compiler.AppcUtils.compileEJB(AppcUtils.java:292)
    [wlappc] at weblogic.application.compiler.EJBCompiler.compile(EJBCompiler.java:95)
    [wlappc] at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCompilerFlow.java:113)
    [wlappc] at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompilerFlow.java:43)
    [wlappc] at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:55)
    [wlappc] at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    [wlappc] at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:24)
    [wlappc] at weblogic.application.compiler.Appc.runBody(Appc.java:151)
    [wlappc] at weblogic.utils.compiler.Tool.run(Tool.java:158)
    [wlappc] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    ======================================================
    Here is my weblogic-ejb-jar.xml file :
    ======================================================
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <weblogic-ejb-jar xmlns="http://www.bea.com/ns/weblogic/910"
              xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
              xsi:schemaLocation="http://www.bea.com/ns/weblogic/910
              http://www.bea.com/ns/weblogic/910/weblogic-ejb-jar.xsd">
    <weblogic-enterprise-bean>
    <ejb-name>MyMDB</ejb-name>
    <message-driven-descriptor>
         <resource-adapter-jndi-name>ActiveMQRA</resource-adapter-jndi-name>
         <connection-factory-jndi-name>myQCF</connection-factory-jndi-name>
    </message-driven-descriptor>
    <resource-description>
    <res-ref-name>jms/factory</res-ref-name>
    <jndi-name>myQCF</jndi-name>
    </resource-description>
    <resource-env-description>
    <resource-env-ref-name>jms/queue</resource-env-ref-name>
    <jndi-name>queue.out</jndi-name>
    </resource-env-description>
    </weblogic-enterprise-bean>
    </weblogic-ejb-jar>
    ======================================================
    So, it looks like this problem : http://forums.bea.com/bea/message.jspa?messageID=600018030&tstart=0
    I just need a confirmation :
    - is the "res-ref-name" format incorrect with '/' character ?
    - is the jndi-name format incorrect with '.' character ?
    Else, what is the problem with this DD ?
    Thanks,
    Rudy

    "shubha" <[email protected]> wrote:
    >
    hi ,
    Ejb with ejb-name 'hellobean' in ejb-jar.xml
    should be specified in weblogic-ejb-jar.xml with <weblogic-enterprise-bean></weblogic-enterprise-bean>
    i am having problem in deploying the most simple bean on wls7.0 .
    when i try to open the bean module with the weblogic builder i get the
    following
    message
    weblogic.ejb20.WLDeploymentException: Could not locate bean with ejb-name
    'hellobean'
    in weblogic-ejb-jar.xml
         at weblogic.ejb20.deployer.CompositeMBeanDescriptor.initialize60(CompositeMBeanDescriptor.java:249)
         at weblogic.ejb20.deployer.CompositeMBeanDescriptor.init(CompositeMBeanDescriptor.java:180)
         at weblogic.ejb20.deployer.CompositeMBeanDescriptor.<init>(CompositeMBeanDescriptor.java:171)
         at weblogic.marathon.model.EJBJarCMBean.setup(EJBJarCMBean.java:408)
         at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:76)
         at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:109)
         at weblogic.marathon.tasks.OpenModuleTask.runBackground(OpenModuleTask.java:64)
         at weblogic.jellybeans.core.task.TaskThread.execute(TaskThread.java:114)
         at weblogic.jellybeans.core.task.TaskThread.run(TaskThread.java:55)
    Could not locate bean with ejb-name 'hellobean' in weblogic-ejb-jar.xml
    Module hello1 descriptors failed to load
    if anyone has come across the same problem and have debugged it please
    help me
    out
    thanks in advance

  • JAVA Proxy :: Exception in ejb-jar.xml in NWDS

    Hi All
    I am getting exception while Importing (Inbound) JAVA Proxy ZIP file in NWDS, ejb-jar.xml shows the red cross & when I double click on it got following error -->
    The content of element type "ejb-jar" is incomplete, it must match "(description?,display-name?,small-icon?,large-icon?,enterprise-beans,relationships?,assembly-descriptor?,ejb-client-jar?)".
    I already add the following JAR files in class-path -->
    aii_proxy_xirt.jar
    aii_msg_runtime.jar
    aii_utilxi_misc.jar
    guidgenerator.jar
    One different thing I also notice is that after adding these JAR files in classpath I am not getting my Inbound Interface BEAN under EJB candidates.
    Also nothing is visible under ejbModule usually it shows 4 JAVA files & one template file.
    As a solution I tried searching in google & forum for above exception, most threads suggest to add the Beans to xml files but I am not getting my interface Bean under EJB candidates.
    I also tried reloading all the external JAR files again from System but still same issue.
    Also within the same NWDS one another version of EJB is working fine but I worked on it 6months back, I tried copy its contents to ejb-jar.xml source code but then also nothing happens.
    I am using NWDS Version: 7.0.10
    Can you pls. suggest & let me know what further information I can provide from my side which can help you to investigate it.
    Regards
    Lalit

    hi,
    Your are using server java proxy.
    You can use some other jar files apart from what you are using,.
    ejb20.jar
    exception.jar
    sapj2eeclient.jar
    and after importing your zip file (create a ejb project first ,then add the zar files and then click on the ejbModule and then import your zip file ) close and open your project.
    Do not directly click on ejb-jar.xml.Click on ejbModule and import the .zip file.
    then save your .template file in ejbModule as a .java project.
    then there should not be any error.
    you can refer
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d06315a6-e66e-2910-039c-ba8bbbd23702
    regards,
    ujjwal kumar

  • No EJBs found in the ejb-jar file

    Hello all, we are thinking about migrating from JBoss to WebLogic server, so as a proof of concept I am trying to migrate a JBoss Seam web application to WebLogic server.
    I have followed all the instructions here: http://docs.jboss.org/seam/2.0.2.SP1/reference/en-US/html/weblogic.html and I have set up ebvryhting that is needed in order to start the server (JMS queues, datasources, etc) but when the server starts and tries to load the web application I got the following error message
    <29 ═Ύί 2010 4:34:51 ΉΉ EET> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'myapplication-ear' due to error weblogic.application.ModuleException: Exception preparing module
    : EJBModule(MyApplication.jar)
    [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
    No EJBs found in the ejb-jar file 'MyApplication.jar'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with t
    he @Stateless, @Stateful or @MessageDriven EJB annotation...
    weblogic.application.ModuleException: Exception preparing module: EJBModule(MyApplication.jar)
    [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
    No EJBs found in the ejb-jar file 'MyApplication.jar'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with t
    he @Stateless, @Stateful or @MessageDriven EJB annotation..
    at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:467)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
    Truncated. see log file for complete stacktrace
    Caused By: java.io.IOException: No EJBs found in the ejb-jar file 'MyApplication.jar'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at l
    east one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
    at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:219)
    at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
    at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1242)
    at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:395)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
    Truncated. see log file for complete stacktrace
    The MyApplication.jar is where we keep all the models and we are using an exploded folder for the ear file. We have declared all the classes to be entities by using the @Entity and @Table annotations and we have also defined an interceptor in the ejb-jar.xml file (shown below).
    <?xml version="1.0" encoding="UTF-8"?>
    <ejb-jar xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd"
    version="3.0">
    <interceptors>
    <interceptor>
    <interceptor-class>org.jboss.seam.ejb.SeamInterceptor</interceptor-class>
    </interceptor>
    </interceptors>
    <assembly-descriptor>
    <interceptor-binding>
    <ejb-name>*</ejb-name>
    <interceptor-class>org.jboss.seam.ejb.SeamInterceptor</interceptor-class>
    </interceptor-binding>
    </assembly-descriptor>
    </ejb-jar>
    I have tried to compile everythign from scratch by using weblogic.appc but I am getting the same error: No EJBs found in the ejb-jar file 'ejbModule'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
    Any ideas what is going on and how I can resolve the issue?
    Regards
    Panos
    Edited by: 816483 on 29 Νοε 2010 6:53 πμ

    Hi John,
    I am working on development an enterprise application using EJB 3.0 on Weblogic 10.
    While developing, I am keeping all my classes (from ejb's as well as web) into APP-INF/classes directory. It is working fine for Web and ejb 2.0 packages, but ejb 3.0 packages, I get the following error when I keep my ejb 3.0 beans classes in APP-INF/classes directory.
    No EJBs found in the ejb-jar file 'customer'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
    One solution is to keep the classes under customer ejb directory, but I wan tto keep all the classes in APP-INF/classes directory so that when using Eclipse IDE I can output all compiled sources into APP-INF/classes directory.
    Has anyone faced this situation? Any suggestions to fix this issue?

  • Cannot build EJB jar file in NWDS

    hello,
    I changed java beans file, and tried to build jar file again, then the "build EJB archive" context menu is disabled so I can not make EJB jar file!
    So frustrated.. NWDS recognizes the changes in the java files , right? How come there 's no Build menu..
    Is there any pre-requisite to enable the menu?
    I have no idea how I can build jar file..
    Please give me a advice.. Thanks~!

    You might check the weblogic.developer.interest.ejb.tools new group.
    Make sure that the tool doesn't leave this ejbcgen directory around. It
    should delete
    that temp dir. When it doesn't it keeps all the old generated stuff around
    and your changes won't be
    reflected in the new jar.
    Rodrigo Ruiz Aguayo <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    I have a problem with the EJBDeployerTool. When I want to update
    a class file (for example, because I corrected any problem), the
    deployer tool doesn't update the file correctly. It keeps the
    old version of the class file.
    In order to update a jar I have to copy the newer version in the
    .ejbdeployer/provider-projects directory by hand. Is it a bug?
    Is there any other way to do this? We are wasting too much time
    in this task, instead of programming :_(
    Thanks in advance,
    José Rodrigo Ruiz Aguayo e-mail : [email protected]
    I.T. en Informática de Sistemas webpage : ---------------------
    "Simulation is perfect, whenever we're not talking about reality"

  • Ejb-jar.xml DTD validation error?

    I am attempting to deploy a JAR on App Server 8 PE. The application does not contain any EJBs but I understand that the ejb-jar.xml descriptor is still needed. I am running the app server on Windows XP.
    My issue is as follows:
    I understand that the root element for the ejb-jar.xml file (<ejb-jar>) is required. Since I have no EJBs, I should be able to leave this root element blank (as I have in previoius successful deployments to earlier versions of Sun App Server). When I attempt to deploy, I receive the following DTD Validation error via the admin console:
    The content of element type "ejb-jar" is incomplete, it must match "(description?,display-name?,small-icon?,large-icon?,enterprise-beans,relationships?,assembly-descriptor?,ejb-client-jar?)".
    Am I missing something?
    My ejb-jar.xml file looks like:
    <!DOCTYPE ejb-jar PUBLIC
         "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN"
         "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
    <ejb-jar>
    </ejb-jar>
    Many thanks in advance to any assistance...

    I am attempting to deploy a JAR on App Server 8 PE.
    The application does not contain any EJBs but I
    I understand that the ejb-jar.xml descriptor is still
    needed. I am running the app server on Windows XP.
    My issue is as follows:
    I understand that the root element for the
    ejb-jar.xml file (<ejb-jar>) is required. Since I
    have no EJBs, I should be able to leave this root
    element blank (as I have in previoius successful
    deployments to earlier versions of Sun App Server).
    When I attempt to deploy, I receive the following
    g DTD Validation error via the admin console:
    The content of element type "ejb-jar" is incomplete,
    it must match
    "(description?,display-name?,small-icon?,large-icon?,e
    nterprise-beans,relationships?,assembly-descriptor?,ej
    b-client-jar?)".
    Am I missing something?
    My ejb-jar.xml file looks like:
    <!DOCTYPE ejb-jar PUBLIC
    "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
    s 2.0//EN"
         "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
    <ejb-jar>
    </ejb-jar>
    Many thanks in advance to any assistance...I hav tried this and it is working
    <?xml version="1.0" encoding="UTF-8" ?>
    <ejb-jar
    xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd"
    version="2.1">

  • ClassNotFoundException if ejb jar file is not placed in the server's classpath

    Hi,
    My ejb jar file contains some non-weblogic generated files and is placed in
    the applications directory. When client is executed, I get the ClassNotFoundException
    on the server when my bean makes a reference to the generated class. The problem
    gets resolved if I put the ejb jar in the server's classpath.
    This problem happens in weblogic server version 6.1. It was not happening in
    the previous releases of weblogic server(6.0).

    Well
    I follow your instruction
    I am pasting the command prompt operation
    Coding is same above
    My all three files (.java )is resides in javath folder
    command prompt code
    Z:\javath>javac -d . sa.java
    Z:\javath>javac -d . sb.java
    Z:\javath>jar -cvf p1.jar p1/*.class
    added manifest
    adding: p1/sa.class(in = 687) (out= 423)(deflated 38%)
    adding: p1/sb.class(in = 185) (out= 153)(deflated 17%)
    Z:\javath>javac demopack.java
    demopack.java:4: cannot access sb
    bad class file: .\sb.java
    file does not contain class sb
    Please remove or make sure it appears in the correct subdirectory of the classpa
    th.
    public class demopack implements sb
                                     ^
    1 error
    Z:\javath>------------------------------------------------------------
    in demopack.java file i want to access class files which are resides in
    jar files
    Actually when we are writing import java.io.*;
    we can access all the class file from that io package
    Same thing i am trying to implement for user defined package
    I hope you understand my question
    regards

  • The DOCTYPE declaration in the ejb-jar.xml deployment descriptor is missing

    Hello,
    I want to create web service from ejb but everytime I want to do it, I get the following error:
    I'm using NWDS 7.2 and JDK 1.6
    [004]Deployment aborted
    Settings
    SDM host : XXX
    SDM port : 50118
    URL to deploy : file:/C:/DOCUME1/XXXX/LOCALS1/Temp/temp3760382784932063822XXXWSProjectEar.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/XXX/LOCALS1/Temp/temp3760382784932063822XXX/WSProjectEar.ear
    Aborted: development component 'XXXWSProjectEar'/'sap.com'/'localhost'/'2011.01.06.15.48.31'/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/XXXWSProjectEar.. Reason: The DOCTYPE declaration in the ejb-jar.xml deployment descriptor is missing. ; nested exception is:      com.sap.engine.services.ejb.exceptions.deployment.EJBXMLParserException: The DOCTYPE declaration in the ejb-jar.xml deployment descriptor is missing.
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted
    Can anyone tell me why am I getting this error.
    Thnx for your help.
    Best regards.

    Hello Decio Junior,
    Actually yes, I resolved my problem.
    I'm developing an EJB 3.0 project. I'm using NWDS 7.2 and JDK 1.6 as I said.
    The problem is that my server was using JDK 1.4 and that was the problem.
    EJB 1.1 and 2.1 need ejb-jar.xml but EJB 3.0 use the annotations instead.
    Check your server JDK Version. It should be JDK 1.5 or higher.
    Something else that you should check, in your project properties :
    In the Build PATH : Use JDK 1.5
    In the Java Compiler : Set the java compiler compliance level to 1.6 and check use default compliance settings
    Hope it would help.
    If you need more explanations, I'm here
    Good luck.

  • Orion-ejb-jar works in oc4j, but seemingly ignored while running in jdev

    I'm using OC4J 9.0.2.0 and JDeveloper 9.0.2.
    I have a set of entity classes. I'm trying to map the entity name to a different table name, and map the field names to different column names.
    I have an ejb-jar.xml that sets the ejb-name, and I have an orion-ejb-jar.xml that uses the ejb-name, specifies a "table-name", and uses "cmp-field-mapping" elements. The "table-name" and "cmp-field-mapping" elements do what I said, using a table name different from the ejb name, and db column names different from the field names.
    When I build and deploy this in standalone OC4J, it works fine. It creates the exact table and column names that I specified.
    Now, how the heck do I get this to work in JDeveloper 9.0.2? Is this impossible as of this version? I need to know this.
    In JDeveloper, I can edit the orion-ejb-jar.xml file, and I can do the "Edit Settings" option, and that all looks correct, but when I finally run the embedded OC4J, it creates the wrong tables with the wrong attributes.

    I tried a simple test case and it seems to work fine
    I create a entity bean by name "foo" with 2 fields "col1" (CMP PK) and "col2" (CMP field)
    Select orion-ejb-jar.xml in project and right-click on it and choose settings
    Select foo in the upper left hand items
    Added table name on the right hand side "deployfoo"
    Select CMP Field Mappings on the lower left hand side
    Select col1 and in the persistence name add "firstcolumn"
    Seelct col2 and in the persistence namd add "secondcolumn"
    When I run the bean the table is created with the above name and columns
    Message in log window
    <<
    Auto-creating table: create table deployfoo (firstcolumn VARCHAR2(255) not null primary key, secondcolumn VARCHAR2(255) null)
    >>>
    raghu
    JDev Team

  • Use of externally-defined/ in weblogic-ejb-jar.xml

    I am trying to use Global Roles defined via the Weblogic console to control access to EJB methods.
    I am using the <externally-defined/> tag in security role assignments, however when I deploy to Weblogic I get the following error :
    <8/09/2004 04:21:42 PM GMT+10:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application appsdirmars-marketdata_ear due to error weblogic.manag
    ement.ApplicationException: Prepare failed. Task Id = null
    Module Name: ejb-marketdata.jar, Error: [EJB:011024]The XML parser encountered an error in your deployment descriptor. Please ensure that your deployment descriptor corresponds to the format in the DTD. The error was:
    Error parsing file 'META-INF/weblogic-ejb-jar.xml' at line: 51 column: 26. Element type "externally-defined" must be declared..
    at weblogic.j2ee.J2EEApplicationContainer.checkForErrors(J2EEApplication
    Container.java:1612)
    at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
    er.java:1207)
    at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
    er.java:1051)
    at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
    er.java:823)
    at weblogic.management.deploy.slave.SlaveDeployer$Application.prepare(Sl
    aveDeployer.java:2925)
    at weblogic.management.deploy.slave.SlaveDeployer.prepareAllApplications
    (SlaveDeployer.java:967)
    at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
    ava:349)
    at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
    e(DeploymentManagerServerLifeCycleImpl.java:229)
    at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
    at weblogic.Server.main(Server.java:32)
    I am running Weblogic 8.1 SP3 on Windows XP Pro.
    The XML is valid for the specified DTD according to my XML editor.
    The relevevant fragment from weblogic-ejb-jar.xml is included below.
    Any help much appreciated.
    Gavin.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN" "http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd">
    <weblogic-ejb-jar>
    <security-role-assignment>
    <role-name>MarsAdmin</role-name>
    <externally-defined/>
    </security-role-assignment>
    <security-role-assignment>
    <role-name>MarsViewer</role-name>
    <externally-defined/>
    </security-role-assignment>
    </weblogic-ejb-jar>

    I tried using the <global-role/> tag instead - this does deploy without any errors - but when I call the secure EJB method I get the Security Violation error below.
    The DTD says using the <global-role/> tag is fine, albeit deprecated, but the Weblogic 8.1 manual says this has been replaced by <externally-defined/>, so I'm not sure if this should work or not.
    [EJB:010160]Security Violation: User: 'ghughes' has insufficient permission to access EJB: type=<ejb>, application=_appsdir_mars-marketdata_ear, module=ejb-marketdata.jar, ejb=marketdata.MarketDataManager, method=getEnergyOverview, methodInterface=Remote, signature={java.util.Date}.
    So on the whole I'd prefer to work out why Weblogic isn't recognising <externally-defined/> - I've included the full deployment descriptor below - I'm generating it using the latest snapshot of XDoclet - is the DTD specified correct for Weblogic 8.1 SP3 ? (It matches the one specified in http://e-docs.bea.com/wls/docs81/ejb/DDreference-ejb-jar.html - but I can't think of anything else that could be wrong).
    Any tips much appreciated as I need to enable an administrator to customise these roles at runtime rather than hard-coding the role - group mappings into the deployment descriptors.
    Thanks,
    Gavin.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN" "http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd">
    <weblogic-ejb-jar>
    <description><![CDATA[Generated by XDoclet]]></description>
    <weblogic-enterprise-bean>
    <ejb-name>marketdata.MarketDataManager</ejb-name>
    <stateless-session-descriptor>
    </stateless-session-descriptor>
    <reference-descriptor>
    </reference-descriptor>
    <jndi-name>marketdata.MarketDataManager</jndi-name>
    <local-jndi-name>marketdata.MarketDataManagerLocal</local-jndi-name>
    </weblogic-enterprise-bean>
    <weblogic-enterprise-bean>
    <ejb-name>marketdata.MessageManager</ejb-name>
    <message-driven-descriptor>
    <pool>
    <max-beans-in-free-pool>5</max-beans-in-free-pool>
    <initial-beans-in-free-pool>1</initial-beans-in-free-pool>
    </pool>
    <destination-jndi-name>FileTopic</destination-jndi-name>
    <connection-factory-jndi-name>JMSConnectionFactory</connection-factory-jndi-name>
    <jms-polling-interval-seconds>10</jms-polling-interval-seconds>
    <jms-client-id>1</jms-client-id>
    </message-driven-descriptor>
    <transaction-descriptor>
    <trans-timeout-seconds>10</trans-timeout-seconds>
    </transaction-descriptor>
    <reference-descriptor>
    </reference-descriptor>
    <enable-call-by-reference>True</enable-call-by-reference>
    </weblogic-enterprise-bean>
    <!--
    To add enterprise beans that you have deployment descriptor info for, add
    a file to your XDoclet merge directory called weblogic-enterprise-beans.xml that contains
    the <weblogic-enterprise-bean></weblogic-enterprise-bean> markup for those beans.
    -->
    <!-- xdoclet merge file -> weblogic-ejb-jar.xml -->
    <security-role-assignment>
    <role-name>MarsAdmin</role-name>
    <externally-defined/>
    </security-role-assignment>
    <security-role-assignment>
    <role-name>MarsViewer</role-name>
    <externally-defined/>
    </security-role-assignment>
    <idempotent-methods>
    </idempotent-methods>
    </weblogic-ejb-jar>
    Message was edited by [email protected] at Sep 8, 2004 8:45 PM

  • ejb-local-ref where to put this tag in ejb-jar.xml ??

    I have an ejb-jar.xml that looks like this. I have had no problem with remote interfaces. Now I want the bean to have a local interface too.
    Just let me know where the tag I have mentioned for the <ejb-local-ref> has to be put into.
    When I compile this file it throws me an error which i have shown below the output of the ejb-jar.xml file
    <ejb-jar>
    <enterprise-beans>
    <entity>
    <ejb-name>IDMaster</ejb-name>
    <home>maxateev.mondial.brg.idmaster.IDMasterHome</home>
    <remote>maxateev.mondial.brg.idmaster.IDMaster</remote>
    <local-home>maxateev.mondial.brg.idmaster.IDMasterLocalHome</local-home>
    <local>maxateev.mondial.brg.idmaster.IDMasterLocal</local>
    <ejb-class>maxateev.mondial.brg.idmaster.IDMasterEJB</ejb-class>
    <persistence-type>Container</persistence-type>
    <ejb-local-ref>
    <ejb-ref-name>ejb/IDMasterLocalHome</ejb-ref-name>
    <ejb-ref-type>Entity</ejb-ref-type>
    <local-home>maxateev.mondial.brg.idmaster.IDMasterLocalHome</local-home>
    <local>maxateev.mondial.brg.idmaster.IDMasterLocal</local>
    </ejb-local-ref>
    <prim-key-class>java.lang.String</prim-key-class>
    <reentrant>False</reentrant>
    <cmp-version>2.x</cmp-version>
    <abstract-schema-name>IDMaster</abstract-schema-name>
    <cmp-field>
    <field-name>idPrefix</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>idValue</field-name>
    </cmp-field>
    <primkey-field>idPrefix</primkey-field>
    <query>
         <query-method>
              <method-name>findAllIDMasters</method-name>
              <method-params/>
         </query-method>
         <ejb-ql><![CDATA[SELECT OBJECT (f) FROM IDMaster as f]]></ejb-ql>
    </query>
    </entity>
    </enterprise-beans>
    <assembly-descriptor>
    <container-transaction>
    <method>
    <ejb-name>IDMaster</ejb-name>
         <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    </assembly-descriptor>
    </ejb-jar>
    I have also added the following tag in the weblogic-jar.xml
    <local-jndi-name>IDMasterEJB.IDMasterLocalHome</local-jndi-name>
    Just let me know whether I am correct
    On compilation (using ant utility) the error thrown is like this :
    ejbc:
    [java] ERROR: Error parsing 'ejb-jar.xml' line 47: The content of element type "entity" must ma
    tch "(description?,display-name?,small-icon?,large-icon?,ejb-name,home?,remote?,local-home?,local?,e
    jb-class,persistence-type,prim-key-class,reentrant,cmp-version?,abstract-schema-name?,cmp-field*,pri
    mkey-field?,env-entry*,ejb-ref*,ejb-local-ref*,security-role-ref*,security-identity?,resource-ref*,r
    esource-env-ref*,query*)".
    [java] ERROR: ejbc found errors
    [java] Java Result: 1
    Kindly Help !!!
    Thanks n regards
    Sajiv

    This should take care of it
    <ejb-jar>
    <enterprise-beans>
    <entity>
    <ejb-name>IDMaster</ejb-name>
    <home>maxateev.mondial.brg.idmaster.IDMasterHome</home>
    <remote>maxateev.mondial.brg.idmaster.IDMaster</remote>
    <local-home>maxateev.mondial.brg.idmaster.IDMasterLocalHome</local-home>
    <local>maxateev.mondial.brg.idmaster.IDMasterLocal</local>
    <ejb-class>maxateev.mondial.brg.idmaster.IDMasterEJB</ejb-class>
    <persistence-type>Container</persistence-type>
    <ejb-local-ref>
    <ejb-ref-name>ejb/IDMasterLocalHome</ejb-ref-name>
    <ejb-ref-type>Entity</ejb-ref-type>
    <local-home>maxateev.mondial.brg.idmaster.IDMasterLocalHome</local-home>
    <local>maxateev.mondial.brg.idmaster.IDMasterLocal</local>
    </ejb-local-ref>
    <prim-key-class>java.lang.String</prim-key-class>
    <reentrant>False</reentrant>
    <cmp-version>2.x</cmp-version>
    <abstract-schema-name>IDMaster</abstract-schema-name>
    <cmp-field>
    <field-name>idPrefix</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>idValue</field-name>
    </cmp-field>
    <primkey-field>idPrefix</primkey-field>
    <ejb-local-ref>
    <ejb-ref-name>ejb/IDMasterLocalHome</ejb-ref-name>
    <ejb-ref-type>Entity</ejb-ref-type>
    <local-home>maxateev.mondial.brg.idmaster.IDMasterLocalHome</local-home>
    <local>maxateev.mondial.brg.idmaster.IDMasterLocal</local>
    </ejb-local-ref>
    <query>
    <query-method>
    <method-name>findAllIDMasters</method-name>
    <method-params/>
    </query-method>
    <ejb-ql><![CDATA[SELECT OBJECT (f) FROM IDMaster as f]]></ejb-ql>
    </query>
    </entity>
    </enterprise-beans>
    <assembly-descriptor>
    <container-transaction>
    <method>
    <ejb-name>IDMaster</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    </assembly-descriptor>
    </ejb-jar>

  • Reg. Field names in ejb-jar.xml (EJB CMP)

    Hi,
    I am using WAS 5.1 and EJB CMP 2.0.
    I got a error while dealing with the database i.e ORACLE 8.The Scenario in detail,
    I had a table X with filed names 'help' and 'sequence'. When i am generating Jar file using 'ejbdeploy', the name of the field names in Table.ddl changing automatically to 'help1' and 'sequence1'. Due to this i am not able to access data from database.
    Why field names are changing? Are they keywords ? con't we have field names with the above names? If they are keywords tell me the document which contains these details?
    Thanks in Advance.

    According to the ejb-jar.xml dtd ejb-name, ejb-class, persistence-type, prim-key-class, reentrant are the required elements for an entity bean.
    <!ELEMENT entity (description?, display-name?, small-icon?,
              large-icon?, ejb-name, home?, remote?, local-home?,
              local?, ejb-class, persistence-type, prim-key-class,
              reentrant, cmp-version?, abstract-schema-name?,
              cmp-field*, primkey-field?, env-entry*, ejb-ref*,
              ejb-local-ref*, security-role-ref*, security-identity?,
              resource-ref*, resource-env-ref*, query*)>

Maybe you are looking for

  • What are the major benefits of moving business logic to BPEL?

    If our logic is basically unique to every situation (i.e. customer/deployment) is there an advantage of putting it in BPEL?

  • Override document preferences when opening a file

    Hi all Does anyone know if there is a way to override the document preferences with the InDesign preferences when opening a file (or even when a file is open). The issue i have is that I have a whole load of documents where for some reason the supers

  • Cannot drag or move object into mainstoryboard in Xcode 6

    Today when I was using Xcode 6, I found that I cannot drag or move any object into my mainstory board. Also, if I click label, there will be a label stick to the center left and I cannot move it. I don't know why, Please help me!

  • Transient Keyword

    what is the use of transient keyword ?any one can help me...

  • Pro 8600 Plus Scanning for A4 Paper on Mac

    Pro 8600 Plus Scanning for A4 Paper on Mac I am unable to scan A4 paper on my 8600 device using the HP Scan Application. I validated I am using the latest software/firmware.   I can print to A4 paper just can't scan.  Any help would be appreciated. T