EJBException when binding a map containing an entityContext.getEJBLocalObject()

I am attempting to bind a map which contains keys that point to entityContext.getEJBLocalObject()
in ejbPostCreate. This causes an exception to be thrown, which makes it appear
that BEA is trying to prevent a remote client from getting an error if/when they
lookup since they are not local. Are there any ways to get around this, or do
this differently? We know that this lookup will only occur on the server, so we
would like to store this in JNDI.
Thanks so much, Jennifer
METHOD:
public void ejbPostCreate(int id){ Context initialContext = null; Hashtable ht
= new Hashtable(); ht.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,"t3://localhost:7001");
try { initialContext = new InitialContext(ht); } catch (NamingException e) { try
{ initialContext.close(); } catch (Exception ex) { } } Object objref = initialContext.lookup("ABCMap");
if (objref != null){ if (objref instanceof HashMap){ HashMap map = (HashMap)objref;
ABCPrimaryKey key = (ABCPrimaryKey)entityContext.getPrimaryKey(); ABCLocal value
= (ABCLocal)entityContext.getEJBLocalObject(); map.put(key, value); initialContext.rebind("ABCMap",
map); /* exception is thrown */ } } }
EXCEPTION:
<Mar 12, 2002 3:49:44 PM CST> <Info> <EJB> <EJB Exception in method: ejbPostCreate:
javax.ejb.EJBException: Attempt to pass a reference to an EJBLocalObject to a
remote client. A local EJB component may only be accessed by clients co-located
in the same ear or standalone jar file. javax.ejb.EJBException: Attempt to pass
a reference to an EJBLocalObject to a remote client. A local EJB component may
only be accessed by clients co-located in the same ear or standalone jar file.

Clients of a local bean must be in the same .ear file or same .jar file. Even if you are only looking them
up on the same server, they may not be referenced across application boundaries. So, you may not store them
in the global JNDI tree.
Bill
Jennifer Mason wrote:
I am attempting to bind a map which contains keys that point to entityContext.getEJBLocalObject()
in ejbPostCreate. This causes an exception to be thrown, which makes it appear
that BEA is trying to prevent a remote client from getting an error if/when they
lookup since they are not local. Are there any ways to get around this, or do
this differently? We know that this lookup will only occur on the server, so we
would like to store this in JNDI.
Thanks so much, Jennifer
METHOD:
public void ejbPostCreate(int id){ Context initialContext = null; Hashtable ht
= new Hashtable(); ht.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,"t3://localhost:7001");
try { initialContext = new InitialContext(ht); } catch (NamingException e) { try
{ initialContext.close(); } catch (Exception ex) { } } Object objref = initialContext.lookup("ABCMap");
if (objref != null){ if (objref instanceof HashMap){ HashMap map = (HashMap)objref;
ABCPrimaryKey key = (ABCPrimaryKey)entityContext.getPrimaryKey(); ABCLocal value
= (ABCLocal)entityContext.getEJBLocalObject(); map.put(key, value); initialContext.rebind("ABCMap",
map); /* exception is thrown */ } } }
EXCEPTION:
<Mar 12, 2002 3:49:44 PM CST> <Info> <EJB> <EJB Exception in method: ejbPostCreate:
javax.ejb.EJBException: Attempt to pass a reference to an EJBLocalObject to a
remote client. A local EJB component may only be accessed by clients co-located
in the same ear or standalone jar file. javax.ejb.EJBException: Attempt to pass
a reference to an EJBLocalObject to a remote client. A local EJB component may
only be accessed by clients co-located in the same ear or standalone jar file.

Similar Messages

  • DI error when binding user defined table

    Hi,
    I am using matrix. Im binding a User defined table '@NEW' to a Datasource
    oForm.DataSources.DBDataSources.Add("@NEW")
    I also bind the fields to column of the matrix as given below
    oColumn = oColumns.Item("CodeNo")
    oColumn.DataBind.SetBound(True, "@NEW", "U_CodeNo")
    When the table @New contains no records i get error while binding the fields to the matrix.
    I tried the same using STANDARD SAP tables.I am not getting any error and it works fine.
    Can anyone help me?

    Hi,
    I am using matrix. Im binding a User defined table '@NEW' to a Datasource
    oForm.DataSources.DBDataSources.Add("@NEW")
    I also bind the fields to column of the matrix as given below
    oColumn = oColumns.Item("CodeNo")
    oColumn.DataBind.SetBound(True, "@NEW", "U_CodeNo")
    When the table @New contains no records i get error while binding the fields to the matrix.
    I tried the same using STANDARD SAP tables.I am not getting any error and it works fine.
    Can anyone help me?

  • RTC-5161 Error when deploying a MAP

    Hello,
    I recently upgraded OWB 11.1.0.7 to 11.2.0.3 and within the Design Center, I receive error RTC-5161 when deploying a MAPPING. My process flows and all other objects deploy successfully but the MAPPING pops up the RTC-5161 error
    Here is how I went about my upgrade, can anyone tell me if I am missing something?
    -Installed OWB 11.2.0.3 on a new server, configured Workspaces, workflow workspace user
    -Exported an OWB 11.1.0.7 project MDL and imported into the 11.2.0.3 and the Design Center automatically UPGRADED my project.
    -Registered all locations
    -Revalidated all locations within the ROPOSITORY BROWSER(the statuses were previously showing UNKNOWN, now they are all valid)
    I need help PLEASE, if anyone could point me to something I am overlooking....
    AGAIN, ONLY the MAPPING will not deploy, but the Process Flows generates and deploys with no issues.
    I tried running the DEPLOYMENT of the Project from the command line(OMBPLUS), here is the error generated:
    Processing module LOCATIONS ...
    Deploying module name: FFL_DL_BMFENT_FFM_BMFENT
    module name is FFL_DL_BMFENT_FFM_BMFENT
    Deploying module name: DBL_EFDS_DL_BMFENT_DBM_TGT_EFD
    module name is DBL_EFDS_DL_BMFENT_DBM_TGT_EFD
    Deploying ... CONNECTOR : DBL_EFDS_DL_BMFENT_DBM_TGT_EFD/CONN_FFL_DL_BMFENT_FFM_BMFENT
    Error deploy drop action plan for DBL_EFDS_DL_BMFENT_DBM_TGT_EFD/CONN_FFL_DL_BMFENT_FFM_BMFENT, err msg= "OMB05602: An error occurred during deployment: DeploymentContextImpl.generate WBGeneratedObject[] is null or length 0 for CONN_FFL_DL_BMFENT_FFM_BMFENT"
    Error deploy LOCATIONS : CONNECTOR

    Fixing this actually entailed going through the repository browser and checking the first optional feature during the configuration of the workspaces etc
    thanks for all your help!
    Now I have another issue with synchronization:
    I noticed that doing an inbound synching of my staging table using replace option and by object name, the preview window that pops up shows my objects to be updated not matching one to one.
    Has anyone ran into something like this?
    The synchronization preview shows source to target columns NOT MATCHING one to one.....

  • Error when deploying a map

    hello i have the following error when deploying a map in a local database, the mapping is a simple transfert of data between two table,
    ORA-06550: line 0, column 0:
    ORA-04052: erreurs lors de la consultation de l'objet distant [email protected]@KCDBDEV
    ORA-00604: une erreur s'est produite au niveau SQL récursif 1
    ORA-01882: région de fuseau horaire introuvable
    ORA-02063: pré
    any help please
    thanks,
    tarek

    Hello thank u for helping, i have exactly the same problème in Error executing a query using a DB-Link
    but i am not inderstanding the solution, i found the same probleme in metalink, and the solution posted is:
    1. Create an errorstack of the ORA-1882 to see the ALTER SESSION SET TIME_ZONE statement that is causing the ORA-1882 during deployment. To create this errorstack, follow step 1 to 4 below:
    1. Just before you reproduce the error, open a SQL*Plus session with user SYSTEM.
    SQL> alter system set events '1882 trace name ERRORSTACK level 3'
    2. Deploy the mapping to reproduce the ORA-1882
    3. Disable the system event
    SQL> alter system set events '1882 trace name errorstack off';
    4. Take a look at the errorstack (located in the udump directory). Suppose the following statement is in there:
    ALTER SESSION SET TIME_ZONE = 'GMT+02:00'
    2. Modify the run_service.sh(.bat) file as follow:
    * For UNIX:
    Modify owb_server_home/owb/bin/unix/run_service.sh as follows:
    Add the parameter -Duser.timezone="+02:00" to the line where java is started (last line of run_service.sh)
    $JAVAPATH/bin/java -Xmx768M -Djava.awt.headless=true -DORACLE_HOME.....
    e.g:
    $JAVAPATH/bin/java -Xmx768M -Duser.timezone="+02:00" -Djava.awt.headless=true -DORACLE_HOME
    * For Windows:`
    Modify owb_server_home\owb\bin\win32\run_service.bat as follows:
    Add the parameter -Duser.timezone="+02:00" to the line where java is started
    %JAVAPATH%\jre\bin\javaw.exe %JVM_OPTIONS%
    e.g.:
    %JAVAPATH%\jre\bin\javaw.exe -Duser.timezone="+02:00" %JVM_OPTIONS%
    3. Save the file and re-start the Runtime Service using stop_service.sql/start_service.sql.
    but in creating the errorstack of the ORA-1882 i not found the ALTER SESSION SET TIME_ZONE
    and i Modify the run_service i fixed -Duser.timezone="+01:00" cause the time zone here is Europe/Paris but there is no changes.
    the db link is from Oracle 10.2.0.2.0 to 9.2.0.1.0. and owb 10g R2
    other solution?
    thanks,
    tarek

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

  • I have a problem when using Google Maps, at some point my computer blanks the window and says there's a problem with display drivers, and it has recovered,but it doesn't. Problem doesn't happen with Int Explorrer, so I do not believe it is the computer

    When using google maps through Firefox, after asking for a place which is not the general North America section which routinely comes up, the firefox screen goes white, with a narrow banner at the top. A message appears in the lower right corner which says something about display drivers having had a problem, but now have recovered. However the display doesn't recover and the banner message is that Firefox is not responding. When I go to restart Firefox if I go to the restore point, the page is still frozen out.
    I do not believe it is a problem with my computer because it doesn't happen if I use I.E. to go to google maps, then G-maps works normally.
    This phenomenon did not happen before the latest upgrade to either Google or Firefox. I have used Fiefox for a number of years and also Google Maps on previous computers and on this one, and not had this before.
    This is a relatively young computer (Asus EeSlate 121) less than a year old. I have used Firefox since I bought it and until recently had no problem with Google Maps.

    I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
    Now all is working.
    Thanks,
    B.

  • Error 0x800704b3 when trying to map a network drive

    Hi there,
    I have the following error when trying to map a network drive in my home network:
    "\\iomegahmd can not be reached" and the error code is 0x800704b3.
    I already looked into the services, and my strong assumption is that the problem is that the service "TCP/IP NetBIOS Helper" is not statrted and it is disabled. When I try to start it, there is an error message:
    "The system could not find the path specified".
    I've also checked the dependency components of the service "TCP/IP NetBIOS Helper":
    Ancillary Function Driver for Winsock
    NetBT
    TCP/IP-Protocol driver
    NetIO-Legacy-TDI Support driver
    in the device manager if they are running, but they are all running. The start is set to "System".
    Under the TCP/IP Internet version 4 properties of the wireless device, under Advanced -> WINS Ive set Enable NetBIOS over TCP/IP, but it didnt help either.
    What else could I try, so that I can map network drives?
    I should also mention, that the problem persist since some week ago. Before it, it was properly functioning. Also, on the other computers in my networks I do not have problem accessing the same network drive.
    Thanks in advance,
    Dime

    > I should also mention, that the problem persist since some week ago. Before it, it was properly functioning.
    Its difficult to say whats wrong in your case. My first idea is: set the system to early time point before this error appeared.
    I would also recommend to disable all the security software and check if you come across the same problem.
    If you still face the issue, then follow the link to fix the corrupted user profile.
    http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

  • Lion Clients 10.7.4 show network accounts are unavailable and server is not responding when binding to Snow Leopard server 10.6.8

    Hello,
    I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4.  While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD.  I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager.  Towards the end of the week though this stopped working.  Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding".  If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen.  My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else. 
    I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly.  I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD.  I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
    Is anyone else having this issue?  Any help would help me keep my sanity.
    Thanks,
    Dane

    Have you had any luck finding a solution to this?  The only thing I have found was to unbind and then bind without authentication.  Any help with progress on your end would be appreciated!
    Nick.

  • Error when loading XSLT mapping of the application

    Hi,
    I am using XSLT mapping in XI.
    It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
      <SAP:P1>com/cba/***.xsl</SAP:P1>
      <SAP:P2>urn:**:**</SAP:P2>
      <SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
      <SAP:P4>-1</SAP:P4>
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Yes, I have activated it
    Regards,
    Anirudh.

    hi
    please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
    Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
    Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
    reward points if found helpfull
    regards
    chandra.k

  • Error received when attempting to map a PeopleSoft role in CMC

    We receive the error "Error occurred while updating PeopleSoft Enterprise authentication properties: The PeopleSoft Enterprise server returned an error. Error: (SOAP-ENV:Server) Server Error. Detail: Unable to find a Routing corresponding to the incoming request message."  when attempting to map in a role from a PeopleSoft enterprise system. 
    Note we are able to map roles into this BOE system from other PS systems with no issues.... 
    This particular PeopleSoft system has a Tivoli Access Manager layer, while all others we have successfully integrated with do not.  Is there anything that needs to be different for the QAS URL for a PS system behind TAM?  Is the integration kit supported for use with TAM PeopleSoft environments where there is an additional logon layer?  Any idea what could be causing the attached error?
    Thanks in advance!

    Only closed so that I could open other questions (10 question limit).

  • When I open maps, it keeps blinking a screen with ...

    When I open maps, there is a blinking screen showing last devices used and maps wont work
    there is also a blinking screen about going on line and it says to go to tools and go online. If I am quick, between blinking screens about last devices used, i can do this, but even when online there appears to be no difference
    Any ideas?
    It's an E71 and I have not been able to use this feature ever.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    :[[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Oracle Apps.XML reports ending with warning when the report output contains

    Hi I have XML reports. When we run these reports as concurrent program through Oracle Apps. window and if the report output contains special characters(like Chineese data) in between of English, then the concurrent program is ending with warning. If we remove special characters then it is working fine or when we run the report query directly from backend it is working fine.
    We are importing this data from legacy system into oracle apps. and we can't control these characters or decode them with some other charactes.
    Can any one guide me how to get the XML report output with special characters.
    Thanks in advance.
    Chandra Babu Lankipalli.

    Hi Hussein,
    The concurrent program is ending with Warning. It is unable to publish output file.
    For the same when we remove special characters and run the program it is completing and generating the
    output. The log fine is as follows when the data file contains special characters.
    Custom Application: Version : UNKNOWN
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XXFA_AR_WIN_EXCEPTION module: XXFA AR Wintrack Customer Interface Exception Report
    Current system time is 23-MAR-2009 05:33:19
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_CUST_ERRORED='3'
    P_CUST_SUCCESS='0'
    P_CUST_TOTAL='3'
    P_REQUEST_ID='4661283'
    P_USER_NAME='SYSADMIN'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    /d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Report Builder: Release 6.0.8.25.0 - Production on Mon Mar 23 05:33:19 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 4661284 on node FAHQSNA01SFTD03 at 23-MAR-2009 05:33:20.
    Post-processing of request 4661284 failed at 23-MAR-2009 05:33:21 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    ------------- 2) PRINT   -------------
    Not printing the output of this request because post-processing failed.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 23-MAR-2009 05:33:21
    Thanks in advance.
    Chandra

  • RuntimeException when executing application mapping program

    Dear Friends
    I am trying to send an Idoc from R3 system to an SCMTM system.
    I have imported the idoc, message mapping is preconfigured from SAP and requisite  configurations in ID have been completed.
    I am getting this error in test of Interface mapping (operation mapping).
    RuntimeException when executing application mapping program com/sap/xi/tf/_DESADVDELVRY03_to_ShipmentRequestRequest_; Details: com.sap.aii.mappingtool.tf7.IllegalInstanceException; Cannot create target element /ns0:ShipmentRequestRequest. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD.
    Please help.
    Thank You
    Warm Regards
    Arjun Ghose

    Hi,
    it seems that per your XSD the element "/ns0:ShipmentRequestRequest" needs to be created and filled with a value (occurance min 1). But appearently within your mapping you do not create or fill this element. So the validation of the XML against the XSD fails.
    Please check your mapping regarding the element "/ns0:ShipmentRequestRequest".
    Reagrds,
    Kai

  • Error VLD - 5005 when validating the map

    Using Datawarehouse builder 10.2 i have the following problem.
    This is the scenario:
    I have a dimension with one level and no hierachy and i want to do a mapping between a table and that dimension.
    Table has three atributes:supplier_id;name_sup;adress_sup.
    The dimension(which passes the validation) as four, three of type business to store information from the table atributes and one of the type surrogate(all these atributes belong to the same level).
    When validating the mapping I have this error:
    VLD-5005: no updatable inputs connected for dimension level "DIM_CUSTOMERS.LEVEL1"
    Details: At least one updatable input must be connected for level DIM_CUSTOMERS.LEVEL1, or the generated code will fail. paraent reference key and level natural key inputs are not updatable attributes in the target
    If I change dimension loading type to remove(instead of load) the validation is sucessful but the map doesn't work.
    Could anyone please give me a sugestion.
    João Costa
    Student of informatic engineering (University of Coimbra)

    Hi!
    could you explain that a little more please? (I.e. "make one of your source table attributes non-business"). I thought you could add the 'business' tag to attributes in the dimension, but I cannot see how to do that to the source table that is loading the dimension.
    FYI, I am trying to add an 'all-levels' category-type top level to a dimension hierarchy where the true source data goes
    L1>L3
    L2>L3
    L3to make the result
    L-CATEGORY>L1>L3
    L-CATEGORY>L2>L3
    L-CATEGORY>L3
    This is intended to combine source data from two sources, Products and Services. Products have two unrelated Type levels above them. Services have no Types. I thought I might be abow to create a mapping per source, and use a Constant to insert a Category attribute (business key) of either 'PRODUCT' or 'SERVICE' per mapping. My thinking was to use two seperate loads to the dimension. However, the first one generates the VLD-5005 error. I'd sure appreciate some help with theis fix.
    Do you know a better way of doing this?
    Also, is there a list/manual anywhere of all error messages for Paris?
    Cheers,
    Donna

  • When will the maps bug in IOS6 be fixed?

    When will the maps bug in IOS6 be fixed?

    richard0801 wrote:
    Thats not where they are thats where Apple think they are, try coming out of Victoria walking straight across the road and you are in ?????   god knows where on apple but its not where you acually are, I have tried it and its total crap. By the way there are 2 Hammersmith underground stations. Your map just shows 1 pin
    You explicity claimed that "all 400 stations are missing" in Apple Maps. I only needed to locate one to prove you wrong. Instead, I proved you doubly wrong. I didn't realize I needed to prove you triply-wrong. Oh well...
    Naming subway stops is not Apple's responsibility and obviously not London's strenths. The pin shows the general location of "hammersmith".
    Okay I am in Holloway road, where is the nearest station to me?, if I don't know the name I cant find the station.  I know there are 6 but Apple does not show any of them
    When I enter "holloway road london", I get a bunch of pins and the first one that automatically gets selected is the subway station. Since that is one of "any of them", you have been proved wrong 4 times over.
    Etre have you ever been out and used walking maps? I think you need specsavers
    Do you actually own an iPhone? Are you aware it has GPS? Have you really ever actually tried it? Because when I manually nagivate to one end of Holloway road and search for "underground", I get this:
    Strangely, if I go to the other end of the street and do the same thing, I get an entirely different station:
    I wonder what would happen if I did a similar search for "underground" while zoomed in on the "hammersmith" pin?
    Well what do you know? But how would I ever get there? Hmmm, you mentioned "walking maps". Maybe I should try walking directions from "hammersmith" to one of the underground stations.
    By my count, I have proved your anti-Apple Maps misinformation to be wrong 6 times over. Wanna try for a lucky seven?

Maybe you are looking for

  • SAP BW Bex Queries as Data source WIS 10901 Error while refreshing

    Hi,    I have created a Web Intelligence report based on Universe upon SAP BEx queries.   When I refresh the report, I get the following error:   A database error occured. The database error text is: the supplied XML is not valid. [Measures].[4ASYKV5

  • Find tables

    If there is a way to find tables by using the Find/Change dialog, I haven't been able to discover it. If there is no way to do it using Find/Change, does anyone know of a script that would find tables in an InDesign CS4 document?

  • Exporting .MOV problem

    Adobe Premiere Pro CS4 Version 4.2.1 When I go to export my film (about 2mins long) in Adobe Media encoder it says that the source file is missing and that the encoding cannot continue. When I go to the location, where apparently it is missing, I fin

  • App store closes unexpectedly

    I bought my MacBook Pro on 25 August 2013. Everything is fine, but several times the App Store has closed. A dialogue box opens says the "App Store has closed unexpectedly". When I accept this the App Store opens again and all is well. Obviously this

  • [solved] Pacman Signatures not trusted

    ben@arch-desktop:~$ sudo pacman -S archlinux-keyring warning: archlinux-keyring-20131027-1 is up to date -- reinstalling resolving dependencies... looking for inter-conflicts... Packages (1): archlinux-keyring-20131027-1 Total Installed Size: 0.55 Mi