Element u201C*J_1BNFE_CUST3_4V-AUTOSERVER touches or overlaps other elementu201D

During the implementation of the OSS note 1394582, I was getting error message Element u201CJ_1BNFE_CUST3_4V-AUTOSERVER touches or overlaps other elementu201D* for the object u201CProgram SAPLJ_1BNFE_CUST02 Screen 0004u201D for the view J_1BNFE_CUST3_4Vu201D. I tried different options like adjusting the length of text element and table control,reimplementing the manual changes and the OSS Note etc....But the issue still persists. The error occurs only during the implementation of the OSS note 1394582 but not when generating objects and activating the screens for the view u201CJ_1BNFE_CUST3_4Vu201D .I dint get any error while view creation as per the OSS note 1153965.Any suggestion are most welcome.
Thanks and Regards
Amar

Similar Messages

Info Popup : Element %_OUT2_%_APP_%-TEXT touches or overlaps

Hi,
There is a selection screen in our report for our tool.I get the information popup
I get this popup when I click on the screen number in se80 to view the flow logic.
Element %_OUT2_%_APP_%-TEXT touches or overlaps
other element
How to rectify this.
Thanks

Slection Screen
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK OUTPUT WITH FRAME title text-006.
PARAMETERS: OUT2 LIKE DETAILS-OUTPUT2 RADIOBUTTON GROUP OUT USER-COMMAND EXPORT DEFAULT 'X',
            OUT1 LIKE DETAILS-OUTPUT1 RADIOBUTTON GROUP OUT.
SELECTION-SCREEN END OF BLOCK OUTPUT.
SELECTION-SCREEN BEGIN OF BLOCK EXPORT WITH FRAME title text-007.
PARAMETERS: EXP1 LIKE DETAILS-EXP_VER_YES RADIOBUTTON GROUP EXP MODIF ID EXP DEFAULT 'X',
            EXP2 LIKE DETAILS-EXP_VER_NO RADIOBUTTON GROUP EXP MODIF ID EXP,
            PROTO LIKE DETAILS-PROT_EXP AS CHECKBOX MODIF ID EXP,
            DEL_LOG LIKE DETAILS-DEL_OLD_LOG AS CHECKBOX MODIF ID EXP,
            ACT_DDIC LIKE DETAILS-EXP_INA_DDI_OBJ AS CHECKBOX MODIF ID EXP.
SELECTION-SCREEN END OF BLOCK EXPORT.
SELECTION-SCREEN END OF SCREEN 200.
Flow logic
PROCESS BEFORE OUTPUT.
MODULE %_INIT_PBO_J.
MODULE %_PBO_REPORT.
MODULE %_PF_STATUS.
MODULE %_END_OF_PBO.
PROCESS AFTER INPUT.
MODULE %_INIT_PAI_J.
CHAIN.
FIELD OUT2    .
FIELD OUT1    .
    MODULE %_RADIOBUTTON_GROUP_OUT                           .
ENDCHAIN.
CHAIN.
FIELD OUT2    .
FIELD OUT1    .
    MODULE %_BLOCK_0200001.
ENDCHAIN.
CHAIN.
FIELD EXP1    .
FIELD EXP2    .
    MODULE %_RADIOBUTTON_GROUP_EXP                           .
ENDCHAIN.
FIELD !PROTO MODULE %_PROTO .
FIELD !DEL_LOG MODULE %_DEL_LOG .
FIELD !ACT_DDIC MODULE %_ACT_DDIC .
CHAIN.
FIELD EXP1    .
FIELD EXP2    .
FIELD PROTO .
FIELD DEL_LOG .
FIELD ACT_DDIC .
    MODULE %_BLOCK_0200005.
ENDCHAIN.
CHAIN.
FIELD OUT2    .
FIELD OUT1    .
FIELD EXP1    .
FIELD EXP2    .
FIELD PROTO .
FIELD DEL_LOG .
FIELD ACT_DDIC .
MODULE %_END_OF_SCREEN.
MODULE %_OK_CODE_1000.
ENDCHAIN.

Problema nota 1877404 - Element *J_1BALV-SCR_CONT touches or overlaps other element

Bom dia colegas.
Estou aplicando a nota 1877404, para o XML 3.10, e está me apresentando os seguintes erros:
Os passos manuais foram aplicados com êxito inclusive o arquivo EBSK184722.zip, e a nota 1803009 (Pré requisito da 1877404).
Algum de vocês já presenciou esse erro e consegue me ajudar a resolve-lo?
Obrigado.
Cássio Oliveira

Cassio, bom dia!
Estou passando pelo mesmo problema que você passou. Segui os seus passos conforme mencionou acima, e não deu certo.
Alterei na view J_1BALV do campo SCR_CONT para SCR_CONT_IT e regerei a tab. de manutenção conforme o item 13 do passo manual.
Quando implemento a nota, no final exibe esta mensagem "Modificações em LJ1BWU03 não permitidas por SAP'.
Verifiquei em outro fórum que existe a nota 193532 para correção, porém não é aplicável para o Support Package.
Segue o fórum http://scn.sap.com/thread/3447011
Agradeço pela gentileza.

HT4972 how to back up all the key element of my ipad touch?

how to back up all the key element of my ipad touch?

What exactly do you mean by all key elements? You can check this page on how to back up your iPod touch.
http://support.apple.com/kb/HT1766

In LabVIEW6i, is there a way to make particular elements of an array invisible while the others stay visible (without losing any element's info.)?

I have an array of clusters. Each cluster pertains to a certain oscilloscope I am controlling. There is another control which specifies which oscilloscopes I have "on".
If a particular oscilloscope is "on" I want its cluster to be VISIBLE in the array. If a particular oscilloscope is "off" I want its cluster to be INVISIBLE in the array.
How can I implement this in my program without losing ANY of the info. in my array?

I suggest to use two arrays; one for user interface holding the ON clusters,
and one for internal use holding all clusters. The diagram periodically
updates the internal array with user interface array data.
By INVISIBLE do you mean "skipped from the array" or displayed as an empty
placeholder? To hide an OFF cluster you could put in the cluster a flat
button boolean that is small and transparent when ON and large enough to
cover the whole cluster area (and other controls) when OFF.
Jean-Pierre Drolet
Scientech R&D
"mcmastal" a écrit dans le message news:
[email protected]..
> In LabVIEW6i, is there a way to make particular elements of an array
> invisible while the others stay visible (without losing any element's
> info.)?
>
> I have an array of clusters. Each cluster pertains to a certain
> oscilloscope I am controlling. There is another control which
> specifies which oscilloscopes I have "on".
> If a particular oscilloscope is "on" I want its cluster to be VISIBLE
> in the array. If a particular oscilloscope is "off" I want its
> cluster to be INVISIBLE in the array.
> How can I implement this in my program without losing ANY of the
> info. in my array?
LabVIEW, C'est LabVIEW

If PDF document is open in any TAB, scrolling through touch pad in other TABs is disabled?

I have ACER Aspire 5740G, Firefox 5.0, Windows 7 Ultimate (X32), Adobe Acrobat X Pro. If some online "pdf" document is open in any of the TABs, The scrolling through touch pad in other tabs stop working however it remain active in the PDF document. After closing the pdf tab the scrolling starts to work normal.

I have the same problem and have had it since Firefox 5. I now have Firefox 6.0.2 and still have the problem.
Windows 7 x64, Synaptics Touchpad V7.2
If an Adobe PDF is open in a tab, touchpad scrolling only works in that tab. If any other tabs are open and user attempts to scroll, nothing will happen in the non-pdf tab, but the pdf will be scrolling. This can be very annoying because if you forget there is a pdf open and try to scroll, you will scroll the pdf out of place.

Any way to connect ipod touch 3G to other non apple devices via Bluetooth??

Hey People,
I was jus wondering ,
can i connect ipod touch 3G to other non apple devices via Bluetooth??
is there any special application which fullfill my wish,
if it is there, then it will make my day,,,,,,,,,,,,,,,

no
bluetooth on the ipod touch only allows for the use of bluetooth stereo headphones and peer-to-peer gaming between two ipod touches (or presumably iphones)

When I update an app it asks for my password (as usual) but now there is no touch keyboard or other way to enter the password. This problem started, I think, after the latest OS update.What's going on?

When I update an app it asks for my password (as usual) but now there is no touch keyboard or other way to enter the password. This problem started, I think, after the latest OS update.What's going on?

I tried a reset and it did the trick.

QM Touch Point with other modules

Dear Gurus,
I am new to QM and have to work on Qm with Pm. Please help me with touch pionts with other modules, List of T- Codes, Config Doc and user mannual.
regards,
PMAddi

HI,
QM is linked with PM in only one concept.
Calibration of Equipments
Inspection type is the main to generate inspection lot for all modules.
In Material master, QM view the inspection type is assigned.
For Ex: 01 will generate inspection lot for Goods receipt for PO
           05 for Goods receipt for others 501 mvt type
           10, 11 - for SD sales order delivery
            03,04 - PP Module
In PM customizing, 14 insp type is to be maintained for order type .
Create inspection plan for that equipment - QP01
Create maintenance order
Then it will generate inspection lot for orders
Select the inspection lot from QA32 tcode.
Check the status of lot. It should be released status. If not assign the inspection specification (task list, plan) with correct usage
Then record the results and do usage decision via QA32.
Regards,
Alagesan

Cell repeats on every page but is overlapping other elements

Hi all,
in my report I have a free cell which schould appear on every page. I selected in cell-properties 'Repeat on every page' and cell repeats as expected.
Problem is that a table in the report starts on second page and onwards not before the bottom of the cell.
Positions of the report elements shouldn't be changed.
Thanks for your help,
Regards Sören

Hi Soren try Bellow
Create a Webi document using
Add a blank cell and put it on the top of the table.
Name the cell as Cell1.
Right click the table and select Format Table.
In Layout tab, set vertical relative position to 0 cm from the Bottom edge of cell1.
Repeat cell1 on each page and keep it blank.
Regards,
mahi

Photo's not syncing between Elements 12 and Photoshop Touch ------ revel or creative cloud - very confusing

I have photoshop elements 12 (updated to 12.1) And i use Photoshop Touch (version 1.6.1) for my Galaxy tab, (which is stock - un-rooted)
I know when i first installed it, any photos i dragged into mobile albums showed up in my Photoshop Touch app.
Now something seems to have changed. The app only has import images via local/creative cloud/camera/google/facebook.
I know Elements 12 is uploading them to Revel, because i can see them online in my Revel Account.
I've installed the Revel app to my tab, and the photos are there.
So if the photos are in the cloud and my Revel app see's them, why are they not showing up in my Photoshop app.
And why is there a creative cloud import option, but no revel import option.
Can someone explain the difference between CreativeCloud and Revel....
All i want to do is edit a few images every now and then on my Tab. but PLEASE how do i get it working again?

If I remember correctly, Revel is a different service than Creative Cloud, hence the confusion. And if I also remember, Revel was around before Creative Cloud and PS Touch. Revel seemed more or less to be aimed at consumers whereas Creative Cloud is more or less aimed at professionals.
Creative Cloud is free (up to 2 GB; most of the Creative Cloud subs provide an additional 18 GB for a total of 20 GB).

Does elements 13 support win8 touch screen?

Is touch screen fully supported in 13? Currently using 11.

Darryl
Yes.
Please see my comments in your other thread.
elements 13 wont open raw files from Nikon d750
Thank you.
ATR

Rotated image overlaps other controls

Hi, I am working on an AIR app involving images. One of the functionalities is viewing as well as rotating images. I made a simple test app to illustrate this portion:
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
        <![CDATA[
            private function rotate():void
                var bitmap:Bitmap = Bitmap(img.content);
                var matrix:Matrix = bitmap.transform.matrix;
                var centerX:Number = bitmap.width/2;
                var centerY:Number = bitmap.height/2;
                matrix.translate(-centerX, -centerY);
                matrix.rotate(90*Math.PI/180);
                matrix.translate(centerY, centerX);
                bitmap.transform.matrix = matrix;
        ]]>
    </mx:Script>
    <mx:Text width="100%" text="Some text"/>
    <mx:Image id="img" width="100%" height="100%" source="test.jpg" horizontalAlign="center" verticalAlign="middle"/>
    <mx:Button label="rotate 90" click="rotate()"/>
</mx:WindowedApplication>
The application window has text on the top and a button on the bottom, with the image in the middle. Each click of the button rotates the image by 90 degrees.
On launch, the app works great. It fetches the image file and fits it to the Image container. As I resize the application, the image also resizes and maintains the position relative to the other controls. Top text and bottom button are where they should be. All good. Let's assume the image is landscape/wide. After I perform the rotate 90 degrees by clicking the button, although the image is rotated and now in portrait orientation, the bottom portion of the image is now out of the image boundary and overlapping the button.
Is there a way to tell the image to fit the content to the container again? Basically, re-layout the whole thing as if the image is in this new orientation.
I suppose I can try to figure out a change in scale and resize the image, but I am not sure if this will hold when the user resizes the application. Also, the rotated image is now rather far to the left, as the "top left" corner is where a landscape image would be. For a portait orientation that's centered horizontally, it should be further to the right. I suppose I can also come up with some formula to center the rotated image. It just seems that the application already has all this logic built in, as it did exactly what I wanted when the image was loaded initially. If I can just ask the application to do it again. Note that similar issue occurs if the image starts out in portrait orientation and is rotated to landscape (too far to the right).
Thanks in advance for the help.
Will

Thanks Sheila and Arnis,
Today I opened the project to try different zoom settings and the problem has vanished; I get the correct arrow at zooms of 100, 120 and 140%.
Likely a bug somewhere deep in Frame's innards. Anyway we've ordered TCS3 so soon I'll be using FM10. Thanks anyway.
--- Derek

I registered my ipod touch on my other apple ID. i dont need that apple ID so i created a new one. how can i register my ipod touch into my new Apple ID?

i need help on registering my ipod touch into my new apple ID. i dont want to use the other ID. so how can i register it into my new Apple ID?

Changing Facetime settings on an iPod will have no affect on cellular settings on an iPhone. Something else is going on there. If she did not change any settings on the phone, then nothing she did could affect your celluar 3G.

Ipod touch full with 'other files' - can't see how to get rid!

My ipod touch has 17.5GB of 'other' files but I can't see how and it won't let me sync all of my songs I've clicked through all the summary bits. I've unticked all videos, TV programmes etc so they shouldn't sync onto the device but nowhere can I see anything about other files! VERY VERY VERY FRUSTRATING! Please help!
Thanks in advance.

An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Element u201C*J_1BNFE_CUST3_4V-AUTOSERVER touches or overlaps other elementu201D

Similar Messages

Maybe you are looking for