Elements 13; zoom burst effect won't add focus area. It will return the picture to the original state.

Can't find answer to problem, have reloaded software, have re-set preferences to default state. Need help with this one. Problem not showing in my Elements 12 version .

I'm having the same problem Tashi, it started about a week ago. Tried everything with no luck.

Similar Messages

  • Photoshop Elements 12 Zoom Burst effect stopped working

    the zoom burst effect has stopped working in PSE 12! when I click the zoom burst function the photo distorts as designed but when i click the "add focus area"
    button on the photo it returns the whole photo to normal without focusing the part selected. can anyone advise how to overcome this,
    I have uninstalled and reinstalled PSE 12 already with no effect.

    I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
    and click on Reset Preferences on next launch, then restart pse 12.

  • In  Zoom Burst Effect Guided Edit, when i use the  Add Focus Area button instead of focusing on what i choose it bring the entire photo into focus.

    In Zoom Burst Effect in Guided Edit, when I use the Add Focus Area button instead of focusing on what I chose it brings the entire photo into focus.

    I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
    and click on Reset Preferences on next launch, then restart pse 12.

  • I have Elements 12. I can not use the "zoom burst effect". I the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part og´f the picture the whole picture imidiatly gets sharp. What is wrong?

    I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

    I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

  • I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

  • In elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

    in elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

    green
    When you click on the Playclaw's Encoder tab, what do you see in the next dialog for Video Compression when the Container field in that dialog is set to .avi?
    Since you are seeing some video at all in Premiere Elements (glitchy as it is), I am assuming the video compression is not AVCHD. If that were the case, I would expect you not to be able to import the file at all. By any chance is the video compression Xvid or DivX?
    It appears that Video compression could also be "H.264 Intel QuickSync" with a mkv file extension. That seems ruled out since you say your file extension is .avi and not mkv.
    So, with the .avi file extension
    what is listed as Video Compression and what have you done, if anything, under the Encoder Setup button?
    Do you have the same issues with and without the antivirus and firewall(s) disabled?
    Also, if you took footage that worked before in Premiere Elements back into today's Premiere Elements, problems or no problems?
    At this time, can you import a bunch of jpg photos into a project and work without this type of issue?
    Thanks.
    ATR

  • How do you add a button that will email the PDF its on?

    I need to create a form but they want it to have a button that will open up an email to send that PDF as an attachment or something along those lines.  Is that possible?

    Just a bit more info. E-mail can be used, but has potential problems -- often related to the client machine that you have no control over. Use the data submissions (either FDF or XML) rather than the full PDF so you do not have to deal with Reader Rights and the related license issues. The FDF and XML data files are easily imported into the original form so that you see what the client sees. With those aspects in mind, just go ahead and try one. Be aware that you can add form fields using the form tools in the Advanced Editing tools, OR use the forms menu that will take you to Designer. You might want to try both to see the pros and cons. Be sure to keep such a test simple so you are not wasting time on your final form just for testing. I typically create a 1 page form that has all of the possible fields for such a test.

  • [svn:fx-trunk] 5295: -add property file that will have the TLF build number in it

    Revision: 5295
    Author: [email protected]
    Date: 2009-03-13 08:50:57 -0700 (Fri, 13 Mar 2009)
    Log Message:
    -add property file that will have the TLF build number in it
    Added Paths:
    flex/sdk/trunk/in/tlf/tlf.properties

    Thats good news.

  • TS1367 I upgraded my cpu but when i start my mac pro it won't power on. I put back the original cpu, but still, it won't power on? What is wrong?

    M y mac pro won't power on. I upgraded my cpu, try putting bac k the original cpu but still it won't power on, what is wrong with my mac pro?
    Shear

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My Elements 12 Zoom Burst "add focus area" has stopped working

    It was working perfectl;y last week but today, this part of the guided screen does not work.
    I have re installed the software, but no joy. I can generate the same effect in expert mode, but what has gone wrong?

    Is it all steps (1 to 4) ?
    Try re-setting the prefs from the Editor menu:
    Edit >> Preference >> General
    Click the button to re-set prefs on next launch. Then quit Elements and re-launch.

  • How to reset "Add Printer" code on 6500a? The original one generated expired and site won't accept.

    What are the exact steps to reset the "Add Printer" code\email for the OfficeJet 6500a? 
    I set up the wireless portion and was generated a code, however trying to register and enter it into the website, it will not accept stating that is has expired (being after the 24 hour time frame).
    Thus, I attempted to find the options to "generate" a new one, and it doesn''t seem to exist.  I reset all wireless settings to default, and attempted to find the code -- and it remains the same.
    What are the exact step by step clicks I need to press on the printer to get a new code that will be accepted by the ePrint website?
    Thank you in advance for your insight.

    Hi mcseqt,
    You can just reprint the instruction page and you will be able to add the printer code again within 24 hours.
    To do so, go to Setup >> Web Services Setup >> ePrint Email Address
    This will print out the eprint instruction page again.
    Thank you.
    I am an HP employee
    **** Please mark the post that solves your problem as "Accepted Solution" ****

  • CC: Keyframes and the ability to add them are not showing in the effect controls menu.

    What am I missing?

    Hi Jim - Yes. I actually just realized it was a different user error - I forgot to click the toggle button by the effect!

  • If i have a form with check boxes. Can I add a button that will display the boxes that the user selected on a new page?

    For example, there are 10 check boxes and the user selects 5 of those boxes. Then they click a submit button. Just the information from those boxes would be displayed so they can print it. Is this possible? Any help pointing me in the right direction would be appreciated.

    That is definitely possible.
    Option 1: checkboxes are all named differently.
    In the click event for the submit button, add some code like this...
    if (cbChoice1 == "1") p2.tfChoice1.presence = "visible";
    else p2.tfChoice1.presence = "hidden"; //can use "invisible" if preferred
    if (cbChoice2 == "1")...
    Option 2: checkboxes are named the same
    In the click event for the submit button, add code like this...
    var checkboxes = xfa.resolveNodes("cbChoice[*]");
    var textfields = xfa.resolveNodes("p2.tfChoice[*]");
    for (i=0; i<checkboxes.length; i++){
        if( checkboxes.item(i).rawValue == "1") textfields.item(i).presence = "visible";
        else textfields.item(i).presence = "hidden";

  • HT4061 iPhone won't start and I don't have the original sim tray in it all got mixed up

    My iPhone suddenly won't charge or now start I sent it to my carrier and they sent it back saying not the right sim tray for that particular phone problem is I have mixed up the sim trays and sold the other phone so no chance of getting it back what can I do ????

    My iPhone suddenly won't charge or now start I sent it to my carrier and they sent it back saying not the right sim tray for that particular phone problem is I have mixed up the sim trays and sold the other phone so no chance of getting it back what can I do ????

  • Frame won't open a file, but will open the MIF file.  Has anyone seen this?

    With FM 9, I have a 2-page landscape file. The first page is Adobe Illustrator *.ai art. The second page is text with a couple of JPGs. I was able to open the *.fm file for a long time, and then Frame started complaining and crashing. A friend can open it on her machine (64 bit, Windows 7) and made me a MIF file from it. I can open the MIF file just fine, but not the *.fm file. All art is imported by reference. Any ideas what is going on? My machine is 32 bit, Windows XP.

    Poz,
    Most likely you are attempting to open a Numbers file created with the ner version using the previous version of Numbers. 
    Use the latest version (3.x) to open that file.  You can tell them apart quickly by observing the icon in the dock (I actually keep both in my dock so I know which one I am using):
              Version                         Version
              2.3                                   3.x

Maybe you are looking for