Elements 9 Color Space

I am not too knowledgeable regarding color space but I am in the process of setting up a new Nikon D7000 and need to decide what color space to use.  I would prefer Adobe RGB.
Does Adobe Photoshop Elements 9 support Exif 2.3 and DCF 2.0 and will it select the correct color space automatically for my photos?

Yes provided you maintain the correct settings for paper and quality the print driver will know exactly what profile to use.
In the Editor you can click on the print settings button and the advanced button to make changes.
For the Epsom e.g. Glossy Paper and quality Best.
Selecting Photo RPM and turning off high speed (for individual prints) also helps to improve quality.
N.B. If you are doing any sharpening of your image do it at the last moment e.g. after all editing and re-sizing and just prior to print.
 

Similar Messages

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • Photoshop Elements 12 does not support the color space

    I recently installed Photoshop 12 on my computer after a reformat. I was previously using Elements 10. i am not getting this error when trying to import photos from my camera. Photoshop Elements does not support the color space. I am using a Nikon D3200 camera to download from. I never had this problem with Elements 10 using the same camera. How do I fix this?

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • The Organizer does not support the color space in the file

    I just purchased and installed PSE 8 as an upgrade to PSE 6.  My catalog correctly shows all of my existing images.  However, when I try to import photos into the Organizer, I get a message that nothing was imported.  The reason given is that "The Organizer does not support the color space in the file."  This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS.  Any suggestions?
    Here is my system information:
    Elements Organizer 8.0.0.0
    Core Version: 8.0 (20090905.r.605812)
    Language Version: 8.0 (20090905.r.605812)
    Current Catalog:
    Catalog Name: My Catalog
    Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
    Catalog Size: 83.9MB
    Catalog Cache Size: 459.8MB
    System:
    Operating System Name: XP
    Operating System Version: 5.1 Service Pack 3
    System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
    Built-in Memory: 2GB
    Free Memory: 829MB
    Important Drivers / Plug-ins / Libraries:
    Microsoft DirectX Version: 9.0
    Apple QuickTime Version: 7.65
    Adobe Reader Version: 9.2
    Adobe Acrobat Version: Not installed
    CD and DVD drives:
    J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • PSE 10 as external editor for Aperture 3 - 8-bit TIFF and what color space?

    Hi all,
    I'm taking the plunge and trying PSE 10 as my external editor for Aperture 3.  I understand that I need to export as 8-bit TIFF files (not 16) because PSE can't do certain things with 16-bit files.  Is that right?  Should I specify a color space in Aperture or leave it as "no profile selected"?  (I don't know much about color spaces; I'm not a pro.)  I print on an Epson RX580 Stylus Photo printer, if that matters.
    I'll be grateful for any help and advice.  Thanks.

    Can I suggest you buy Philip Andrews book, Advanced Photoshop Elements 10.  he explains colour spaces and much much more very clearly and exactly what can be done with 16 bit files and what you then have to change to 8 bit to accomplish.  He's written basic and advanced guides for Elements since day one.  Usually available from Amazon for under £20.

  • How to find the Color Space name for a PDEElement

    Hi
    I am trying to find out the color space for each PDEElement in my PDF file. While doing this,
    I put some debug statements ( cout stmts ) that print the color_space as integer values. I gave this list
    after the code.  I belive the color spaces should be something like CMYK, DeviceRGB,DeviceGray..etc.
    How can I know the actual color space name coresponding to these numbers printed in Debug statements.
    Kindly please help me..
    void   ProcessElementDetails(PDEElement  element)
                    PDEGraphicState  gfx_state;
                    ASInt32  pdeType =  PDEObjectGetType(reinterpret_cast<PDEObject>(element));
        ofstream outfile("E:\\temp\\test.txt",ios::app);
        outfile<<"ProcessElementDetails\n";
        if ( pdeType == kPDEText )
          outfile<<"PDE Text type\n";
          PDEText pde_text = (PDEText) element;
          ASInt32 num_run,i;
              num_run = PDETextGetNumRuns(pde_text);
          outfile<<"Number of Runs for PDEText :"<<num_run<<"\n";
          for  (i = 0; i < num_run; i++)
            PDETextGetGState(pde_text,kPDETextRun,i,&gfx_state, sizeof (PDEGraphicState));
            ASAtom  color_space =  PDEColorSpaceGetName(gfx_state.fillColorSpec.space);
            outfile<<"Color Space :"<<color_space<<"\n";
        if (pdeType == kPDEImage )
          outfile<<"PDE Image type\n";
          PDEElementGetGState(element,&gfx_state,sizeof (PDEGraphicState));
          ASAtom color_space = PDEColorSpaceGetName(gfx_state.fillColorSpec.space);
          outfile<<"Color Space :"<<color_space<<"\n";
        if (pdeType == kPDEContainer)
          outfile<<"PDE Container type\n";
                            PDEContent  content =  PDEContainerGetContent(reinterpret_cast<PDEContainer>(element));
                            ASInt32  numElem =  PDEContentGetNumElems(content);
                            for  (ASInt32  i = 0; i < numElem; i++)
                                 element =  PDEContentGetElem(content, i);
                                 ProcessElementDetails(element);
    Debug statements with color numbers:
    ====================================
    ProcessElementDetails
    PDE Image type
    Color Space :700
    ProcessElementDetails
    PDE Text type
    Number of Runs for PDEText :63
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    ProcessElementDetails
    ProcessElementDetails
    PDE Text type
    Number of Runs for PDEText :38
    Color Space :389
    Color Space :700
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :389
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    SeparateColorPlates
    PDF file exists
    Number of Pages:1
    Number of Elements:5

    As you may have noticed, the "numbers" you see are actually of type ASAtom -
    which is a type declared in the SDK to represent reused strings. You have to
    read the relevant documentation to learn how to use the SDK - there is no
    way around it. The Acrobat SDK is very powerful, but also a lot more
    complicated than most people expect when they start to work with it. Take
    your time to learn how to use it.
    In this particular case, you need to call this function to convert the
    ASAtom to a string:
    const char* ASAtomGetString<http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html#ASAtomGetString135%28%29>
    (ASAtom<http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html#ASAtom>atm)
    (from
    http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html
    Karl Heinz Kremer
    PDF Acrobatics Without a Net
    [email protected]
    http://www.khkonsulting.com

  • Transparency blend color space in Illustrator

    In InDesign there is an option to specify the transarency blend color space. Is there something equivalent to this in Illustrator? If not, how does Illustrator set the colorspace (CMYK or RGB) for transparent elements? In printing we can get all kinds of problems with transparency problems such as boxes, if the transparency space differs from the image's working space. I want to find a way to sync this so the transparency blends all match the working space. Typically I work in CMYK.  Thanks.

    Ai offers you either RGB or CMYK; you decide which in the File > Document Color Mode ( circa v10 ). Transparency doesn't care which space you use in Ai.  If you work in CMYK, then just make sure your swatches and images are CMYK.  But, I think there are other reasons why you'd get boxes in transparent objects.  Take a look at Flattening.

  • What color space as base in a brand guide?

    What color space forms the base of a color brand guide? How do you start in terms of color spesifications? When I look at most guides it seems that Pantone is always the base, then CMYK, then RGB and Hex? Is RGB and Hex always gonna be a dithered version of the CMYK values or is it best practise to hand pick each one to make them look as close to the CMYK as possible? Is Pantone always mentioned first in the list because that's where the designer started?
    Also, is best practise to mimmick the CMYK and Pantone colors so that the RGB and hex values look like them? Seems to me that most brand guides / visual manuals are made firstly for print, then they add the screen based color spaces.
    In the enclosed example I also observe that the complete values are not always listed, in many cases the Y and K is missing in the CMYK values, does that mean it doesn't contain any black, or is it simply meaning zero? It rarerly occurs with the other color spaces.

    For web, email and screen in general it should always be sRGB. Then you can be fairly certain that it will display correctly (more or less) in any scenario. sRGB wil also work for print (inkjet), it's just that many colors that can be printed are out of sRGB gamut, so it's a restriction that doesn't need to be there. sRGB is a small color space that can't reproduce very saturated colors - they're just clipped. So it's better to start with a larger space like Adobe RGB or even ProPhoto.
    For editing purposes you want a large color space simply to have headroom and not hit the wall at every move. The final destination may well be a smaller space, like a printer profile. The software then converts to that destination profile as it goes to the printer. You can soft proof to the printer profile to get an impression of how the final result will look.
    You can print directly from InDesign, but the typical InDesign workflow is to export a finished PDF. That is where you specify a final destination profile for the whole document, whether a certain CMYK profile for offset press, or an RGB profile for screen. So you have your master InDesign file, and output PDFs for each destination. The InDesign file can contain placed RGB images in any color space, while text and graphic elements are CMYK. Then everything is converted in one go at export.
    You should always go through the PDF Export dialog carefully. Use the presets, but don't automatically accept defaults. For specific purposes, ask here or in the InDesign forum, where they deal with this all the time.
    For screen, under "Output" use convert to destination, sRGB, include profile. Under "Compression", things aren't as obvious as they used to be (downsample to 96 or 100 ppi), because of the new retina displays that can benefit from a higher resolution. I hold my judgement on this one.

  • External editor color space with Aperture and PSE 10?

    Hi all,
    I'm finally setting up Aperture to export to Photoshop Elements (10).  In the Aperture preferences, I'm asking it to export to PSE 10 as 16-bit TIFF files.  What color space should I indicate (if any)?  It's currently set to "no profile selected."  I'm not a professional; just an enthusiast.  I print on an Epson RX580 Photo Stylus printer, if that matters.
    I've searched on this forum and elsewhere, but haven't found a simple answer to this.  All suggestions gratefully accepted.  Thanks!

    Can I suggest you buy Philip Andrews book, Advanced Photoshop Elements 10.  he explains colour spaces and much much more very clearly and exactly what can be done with 16 bit files and what you then have to change to 8 bit to accomplish.  He's written basic and advanced guides for Elements since day one.  Usually available from Amazon for under £20.

  • Camera calibration tab and camera color space

    Hi, I need a confirmation about the hue and saturation sliders on the camera calibration tab. They are there for fine tuning the camera color space primaries in a DNG profile? Thanks a lot.

    Hello, here I'm again.
    I'm probably in the wrong forum, because I can't tell you anything about the DNG secrets
    (though I have the specs).
    About your second question (more an issue for a color science forum), I've found something:
    Estimation of the primaries for a digital camera:
    Please refer to these docs:
    (1)
    Concerning the Calculation of the Color Gamut in a Digital Camera
    Francisco Martínez-Verdú et al.
    http://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CEMQFjAB&url=http%3A%2F %2Frua.ua.es%2Fdspace%2Fbitstream%2F10045%2F973%2F1%2Fproof_final.pdf&ei=uL8UU8-dKYO9ygORs IKADQ&usg=AFQjCNGKNGHQZJoHu_dc2JwQwtLXOpsTBQ&bvm=bv.61965928,d.bGQ&cad=rja
    (2)
    http://docs-hoffmann.de/leastsqu16112006.pdf
    Given is an equation
    (*) X = C R
    We have two applications:
    (1)  Original question
    X = Matrix  X1 X2 ... Xm
                    Y1 Y2 ... Ym
                     Z1 Z2 ... Zm
    m=41 values in each row for CIE CMFs (color matching functions) 380nm...780nm
    R = Matrix  R1 R2 ... Rm
                     G1 G2 ... Gm
                     B1 B2 ... Bm  
    41 values in each row for the sensor sensitivities for red, green and blue CCD array elements
    Matrix C is found by solving equation (*), using the pseudoinverse.
    Matrix C contains the XYZ-coordinates of the primaries red, green, blue as columns 1, 2 and 3.
    (2) About the mathematics
    X = Matrix  X1 X2  ...  Xm
                     Y1 Y2 ... Ym
                     Z1 Z2 ... Zm
    m=24 values for the GretagMacbeth ColorChecker
    R = Matrix  R1 R2 ... Rm
                      G1 G2 ... Gm
                      B1 B2 ... Bm  
    24 values in each row for the RGB results als delivered by the camera, for instance in sRGB.
    Matrix C contains the XYZ-coordinates of the effective primaries(including sRGB)  red, green, blue as columns.
    (2) explains the principle of the pseudoinverse for overdetermined systems of linear equations.
    (1) explains the application for the identification of camera primaries for given sensor sensitivities.
    Unfortunately, the whole concept will fail, if the camera sensor sensitivities (CMFs) are not
    linear combinations of the CIE CMFs x-bar, y-bar, z-bar. In this case, a camera does not have
    primaries, but the computational result can be used as an approximation.
    CMF = color matching function (CIE)
    I regret –it cannot be explained 'for the layman'.
    Best regards --Gernot Hoffmann

  • What Color Space Should I Shoot In.

    First, I'll admit that the entire color management aspect of photography/monitors/printing, is a bit too dense for me to completely comprehend. However, I do have some working knowledge of it. So, here's my pre-LR setup.
    I shoot in sRGB and used Photoshop Elements or RSE or DPP to process the RAW or JPG shots. I export in sRGB and do not allow the printer to Color Manage (I use Windows, BTW) If I send to a lab, I do not use any ICC profiles, as I cannot soft proof, so I let the lab use their profiles. My monitor is calibrated using a Pantone Heuy (I know, not as sophisticated as a Spyder, but what I see on the screen matches what I shot, so I'm happy with it.
    Now. I will be using LR exclusively for processing my photos. What should I set my camera to? I can use AdobeRGB or sRGB. I realize that LR uses ProPhoto, so I'm not sure where my shooting choice adds or subtracts from the equationand I'm still not sure what settings to print in. I can easily try to let LR translate or manage my file when sending to my home printer. How should I prepare a photo for sending to a lab?
    What should I shoot in?
    Should I do anything to the LR color space I work in?
    What should I do, in regards to color space for printing?
    Thaks,
    Steven (the confused)

    Thanks, Ian. For some unknown reason, I had some time ago set up my user name as one of my e-mail addies, and then when I became active on the LR forums, was too occupied to deal with it, until I learned it was easier than pie. And much easier than pi. 3.414x, no?
    I'm leaving in an altered non-robotical-vulnerable format for a bit, so that those that knew me as the E-mail address, or McPhotoman in the beta forum can either listen to what I say, or avoid my postings.... Cheers.

  • Separation color space

    Hi,
    When I edit existing pdf file,and change spot color of separation color space to another(from one pantone color to another ,for example) ,I can't see the difference(colors are changed only if I change it to None or All).Is application using tint transform and alternate color space by default,except in case when color is set to None or All? I read in pdf reference that only if output device can't recognize color ,tint transform is used,then how it recognize one pantone color and other not?
    Regards
    Marko V.

    I really do not understand the question.  The color space typically would not change.  Are you opening the PDF in Illustrator?  Are you selecting an element in Pantone A and changing it to Pantone B?  The change should be obvious unless it is so subtle, you can't see the change on your monitor.  But, the color space should be retained in whatever scenario you're discussing.  Color space usually refers to either RGB or CMYK in Illustrator.

  • Need seperation color space for identified font (text)

    I want to write it into a Seperation color space If i found a font for the text specified in the PDF.
    I got the font name for the text element using PDETextGetFont() function but i want to write those text element into different plane other than CMYK.
    Is there any functions to write those text element into different color space?
    Thanks!!

    Please use the Acrobat SDK forum to reach the specialists who might help.

  • Separation color space for specific fonts

    I Want to write a text (having special font) into a separation color space where my output device supports.
    I was able to get the font name for the text using PDETextGetFont() function but i want to write those txet element into different plane (basically the separation color space which i have created) other than CMYK.
    Is there any specific functions in PDFEdit_Layer to achieve that?
    I tried with some of the functions like PDEColorSpaceCeate() -- for separation but i am unable to achieve my result.
    Thanks for your help

    You must first understand colour spaces in detail and how they are used and their affect on the PDF. The API does not help you with these things. Once you understand colour spaces, you can easily use the API to create colours in any of the 11 colour space families (well, in 10 of them, patterns are not easy). You can use DeviceN or Separation, but what makes them not too easy is that you need to understand (a) the purpose of tint transforms (b) the internal structure of PDF function dictionaries (c) how to create a function dictionary to implement the desired tint transforms.
    You will not find examples of most things, but continued return to the documentation (both plug-in API and 32000-1) should usually yield results.
    As you will see in 32000-1, there is no central list of spot colorants used in a PDF. The list of colorants simply comes from the colour spaces used throughout all pages, form XObjects, patterns and type 3 fonts, and you can freely add more colours. However, it is very bad practice to add new spot colorants with different properties, so a good implementation will start with an analysis of the whole file to discover if the colorant is used, and how it is defined.

  • IPhoto - is it using two different color spaces?

    I know I should have a better handle on this whole question by now, but am still confused by the 1.8 vs. 2.2 Gamma issue.
    On the recent advice of an Apple PhotoServices tech, I've just changed my main display's Gamma from the default 1.8 to the darker 2.2 -- hoping to maximize consistency between what I see onscreen and what I'll receive in my printed Calendar order. (Everything else is still based on the default "Cinema HD" profile.)
    Using one particular JPEG image as a test, I'm seeing something curious:
    In Aperture, the image's thumb and its full-screen version look basically the same. But in iPhoto, that same image looks quite different depending on whether I'm viewing it as a thumb (or as an image placed in a Calendar theme), vs. when I double-click that image and see it in iPhoto's Editor window.
    When I see it in iPhoto's editing mode, it suddenly looks noticeably lighter -- as if I'd switched my display back to the old 1.8 Gamma.
    Can anyone enlighten me here (pardon the pun)? Why does iPhoto's editor window seem to display an image differently than other programs, or even than elsewhere in iPhoto itself? And why am I only seeing this discrepancy after setting my display to the 2.2 Gamma?
    John Bertram
    Toronto

    Okay --
    The plot thickens. I followed your suggestion, Terence, and did some tests. Here are the interesting (if confusing) results:
    When I open anything from within the iPhotoLibrary folder using Preview, Preview gives the Color Profile info as follows:
    Color Model: RGB
    ColorSync Profile: Generic RGB Profile
    This seems to apply to anything from within the iPhotoLibrary package, whether we’re talking images from the Originals folder, from the Modified folder, or thumbs from the Data folder. And they all (when viewed in Preview) look the same, and they all look “correct” in terms of general contrast.
    BUT...
    When I do a Finder “Get Info” on those same files, suddenly there are differences.
    1) from the Modified folder:
    Most images from the Modified folder now say (in Get Info’s “More Info” pane):
    Color space: RGB
    Profile name: Adobe RGB (1998)*
    * (A few give the Profile name as “sRGB IEC61966-2.1”, and the one that got saved as a .psd file says “Camera Sync Profile”. The strange thing is I can’t seem to find any pattern between the images which were modified using my “external editor” -- Photoshop Elements -- vs. the ones which were edited using only iPhoto’s adjustment tools. The bulk of them all say “Adobe RGB (1998)” as the Profile Name.)
    Note that these are the same images which, when opened in Preview, ALL claim the “Generic RGB Profile” -- and all look correct under those circumstances.
    2) from the Data folder:
    Meantime, ALL the thumbnail images which iPhoto has created for its Data folder, when “Get Info’d” in the Finder, all state their Profile name as “sRGB IEC61966-2.1”.
    Open the same thumb image in Preview, and it’s back to “Generic RGB Profile” (as well as back to looking correct and not too dark).
    3) from the Originals folder:
    Finally, images from iPhoto’s Originals folder give no color profile data whatsoever in the “More info” pane of the Finder’s Get Info window. So is this the same as having the “Generic RGB Profile”?
    In any case, here are three different folders (Originals, Modified, and Data), and iPhoto appears to be using a different color profile for the images contained in each one -- and in the case of the Modified folder, several different profiles.
    Yet all of these images, when opened in Preview, appear to use the “Generic RGB Profile” -- and all appear as they should in terms of Gamma/contrast on screen -- while when viewed within iPhoto the same image will look quite different depending on whether it’s being seen in iPhoto’s regular window (as a thumb or as part of a Calendar layout, for instance -- all too dark) or in iPhoto’s editing window, in which case it suddenly looks fine.
    The other mystery is why this discrepancy between iPhoto’s regular viewer and its editing window wasn’t apparent when my display was set to the default 1.8 Gamma; it’s only become an issue under the new (AppleSupport-recommended) 2.2 setting.
    = = = = = == = = = = = = = = = = = = = = = = = = = = = = = =
    My brain officially hurts now. (I guess this is just more evidence that Computers and the Internet will all be very nice if they can finally just get them working.)
    Any help in interpreting this data will, as always, be much appreciated.
    Thanks,
    John Bertram
    Toronto

Maybe you are looking for