EM Configuration issue error

Hello,
We have grid control set up. One of the database shows as agent unreachable. I went into the database server and tried to check the following:
- I went to the /oracle/g01/software/OEM/agent10g/bin and tried emctl status agent and it gave me the below mentioned error:
EM Configuration issue. /oracle/g01/software/rdbms/10.2.0/<db name> not found.
The ORACLE_HOME and ORACLE_BASE variables are fine, but I still get this error.
ORACLE_HOME=/oracle/g01/software/rdbms/10.2.0
It would be great if you could please help me out with this as I am not very familiar with the Grid Control and Enterprise Manager. We have SUN OS.
Thanks,
RPS

Hi,
These files did not exist under $ORACLE_HOME/sysman/emd (meaning they were not created). The agent home we are using is not the $ORACLE_HOME/sysman/emd, but we use the /oracle/g01/software/OEM/agent10g
At /oracle/g01/software/OEM/agent10g we had all these files, i removed them and then tried the commands but the error it gives is the same which is:
EM Configuration issue. /oracle/g01/software/rdbms/10.2.0/<dbname> not found.
I don't know why it is refering to the ORACLE_HOME agent directory instead of /oracle/g01/software/OEM/agent10g
I checked and we do have a directory it is looking for (/oracle/g01/software/rdbms/10.2.0/<dbname>) under /oracle/g01/software/OEM/agent10g
Thanks,
RPS
Edited by: RPS on Sep 16, 2008 1:52 PM

Similar Messages

Lync 2013 to Exchange 2013 Oauth problem - Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer

Hi,
I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
I have read and following the instructions online and cannot see what I am doing wrong.
On the Exchange 2013 server, I get the following error when I run:
Test-OAuthConnectivity -Service EWS -TargetUri
https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
Task : Checking EWS API Call Under Oauth
Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
ago.
The token cache is being cleared because "use cached token" was set to false.
Exchange Outbound Oauth Log:
Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
Information:[OAuthCredentials:Authenticate] entering
Information:[OAuthCredentials:Authenticate] challenge from
'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
client_id="00000002-0000-0ff1-ce00-000000000000",
trusted_issuers="[email protected]",Negotiate,NTLM
Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
trusted_issuer: '[email protected]'
Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
[email protected]
Error:The trusted issuers contained the following entries
'[email protected]'. None of them are configured locally.
Exchange Response Details:
HTTP response message:
Exception:
System.Net.WebException: The request was aborted: The request was canceled. --->
Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
following entries '[email protected]'. None of them are
configured locally.
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain)
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain, ClaimProvider claimProvider)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
HttpAuthenticationChallenge challengeObject)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
webRequest, Boolean preAuthenticate)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
challenge, WebRequest request, ICredentials credentials)
at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
credentials)
at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
authInfo)
at System.Net.HttpWebRequest.CheckResubmitForAuth()
at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
at System.Net.HttpWebRequest.ProcessResponse()
at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
Boolean reloadConfig)
ResultType : Error
Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
IsValid : True
ObjectState : New
It appears to work fine from Lync 2013 to Exchange 2013.
When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
VERBOSE: Successfully opened a connection to storage service at localhost using
binding: NetNamedPipe.
VERBOSE: Create message.
VERBOSE: Execute Exchange Storage Command.
VERBOSE: Processing web storage response for ExCreateItem Success.,
result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
VERBOSE: Activity tracing:
2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
[email protected], Autodiscover
Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
Proxy=<NULL>
2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
type=AutodiscoverRequestHttpHeaders, message=<Trace
Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
POST /autodiscover/autodiscover.svc HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.004
</Trace>
2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
<wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
r/GetUserSettings</wsa:Action>
<wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
wsa:To>
</soap:Header>
<soap:Body>
<a:GetUserSettingsRequestMessage
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<a:Request>
<a:Users>
<a:User>
<a:Mailbox>[email protected]</a:Mailbox>
</a:User>
</a:Users>
<a:RequestedSettings>
<a:Setting>InternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsVersion</a:Setting>
</a:RequestedSettings>
</a:Request>
</a:GetUserSettingsRequestMessage>
</soap:Body>
</soap:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
type=AutodiscoverResponseHttpHeaders, message=<Trace
Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
HTTP/1.1 200 OK
Transfer-Encoding: chunked
request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
X-CalculatedBETarget: exchserver2.domainname.local
X-DiagInfo: EXCHSERVER2
X-BEServer: EXCHSERVER2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
path=/;
HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
X-FEServer: EXCHSERVER2
Date: Fri, 02 Jan 2015 19:15:55 GMT
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
todiscover/GetUserSettingsResponse</a:Action>
<h:ServerVersionInfo
xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<h:MajorVersion>15</h:MajorVersion>
<h:MinorVersion>0</h:MinorVersion>
<h:MajorBuildNumber>1044</h:MajorBuildNumber>
<h:MinorBuildNumber>21</h:MinorBuildNumber>
<h:Version>Exchange2013_SP1</h:Version>
</h:ServerVersionInfo>
</s:Header>
<s:Body>
<GetUserSettingsResponseMessage
xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>NoError</ErrorCode>
<ErrorMessage />
<UserResponses>
<UserResponse>
<ErrorCode>NoError</ErrorCode>
<ErrorMessage>No error.</ErrorMessage>
<RedirectTarget i:nil="true" />
<UserSettingErrors />
<UserSettings>
<UserSetting i:type="StringSetting">
<Name>InternalEwsUrl</Name>
<Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsUrl</Name>
<Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsVersion</Name>
<Value>15.00.1044.000</Value>
</UserSetting>
</UserSettings>
</UserResponse>
</UserResponses>
</Response>
</GetUserSettingsResponseMessage>
</s:Body>
</s:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
duration Ms=88, response=NoError
2015/01/02 19:15:55.706 Lookup user details,
sipUri=sip:[email protected], [email protected],
sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
tenantId=00000000-0000-0000-0000-000000000000
VERBOSE: Items choice type: CreateItemResponseMessage.
VERBOSE: Response message, class: Success, code: NoError.
VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
VERBOSE: Is command successful: True.
Test passed.
All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
from what I read this was what I was supposed to do.
is this correct?
I have tried so many things I don't know what do to next.
Should the OAuth certificate in exchange be the one exported from Lync?
In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
thank-you
jack

Thomas,
thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
remove-PartnerApplication.
is there a way to completely remove everything that is confirmed when you run
Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
thanks
jack
[PS] C:\Windows\system32>Get-PartnerApplication |fl
RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
Enabled : True
ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
+zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
amTDdZY4h+QBqUvvY=}
AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
Realm : domainname.local
UseAuthServer : False
AcceptSecurityIdentifierInformation : True
LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
IssuerIdentifier :
AppOnlyPermissions :
ActAsPermissions :
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
ObjectClass : {top, msExchAuthPartnerApplication}
WhenChanged : 10/01/2015 17:14:55
WhenCreated : 10/01/2015 17:14:55
WhenChangedUTC : 10/01/2015 17:14:55
WhenCreatedUTC : 10/01/2015 17:14:55
OrganizationId :
Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
OriginatingServer : DomServer2.domainname.local
IsValid : True
ObjectState : Unchanged

BizTalk Configuration 2013 issue - Error in Group configuration

Hi,
I am configuring BizTalk 2013 in a Virtual machine and SQL server 2012 in another Virtual machine.
I have successfully configured the SSODB database. while configuring the Group's i am getting following error.
" exception of type System.EnterpriseServices.TransactionProxyException was thrown".
The following configuration was done already as a post installation steps.
1. MSTDC was enabled in SQL Server with XA transaction and all pre requiestee
2. Windows firewall was off in Both BizTalk and SQL Server . But we enabled the DTC In in BizTalk server and DTC out in SQL Server VM.
Do we need to check any configuration or what is the next step to proceed with the success ful configuration.
We are not able to identify the problem.
Regards, Aboorva Raja R Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Hi Raja,
The issue what you see is a
well document DTC issue in BizTalk. DTCTester would be the tool to start with. Otherwise try the suggestions as suggested here in this MSDN article.
MSDN: Troubleshooting Problems with MSDTC.
this issue also occurs if you have not created SQL Alias to communicate with remote SQL Server using Non-Standard Port. Follow the steps documented in the following article to create a SQL Server Alias on the client machine to connect to SQL Server machine:
Steps required is in middle of this article, search for "Error Configuration Framework]Feature: [Group] Failed to configure with error message [Exception of type 'System.EnterpriseServices.TransactionProxyException' was thrown"
Installing BizTalk Server 2010
in a Basic Multi-Computer Environment: Preparing and install prerequisites on BizTalk Server 2010 machine
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Portal communication Error / Configuration issue.

Hi All,
I am not able to open a web templet in the Web Application Designer,
it gives a pop up saying : The request operation could not performed due to portal communication error,
portal unavailability or Configuration issue.
Thank you,
Nisha Jagtap.

Hi Nisha,
1 Logon to portal
2. Goto System Administration  System Configuration  System Landscape .
On the Right hand side Portal Content folder is displayed. Open it and check if a subfolder Systems and find the system which used to integrate bw and ep.
check the below thread for configuration of sso between ep and bw which gives you claer idea
SSO steps between EP and BW System
Koti Reddy

Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

Hello Experts,
I follow the flightbooking tutorial to create a Material application to get material list. I can start the agentry server but when I connect to SAP server and get data, I face below issue
Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
My javaBE
[HOST]
server=be1.vdc.csc.com
APPNAME=ZCH_MATERIALLIST
[CLIENT_NUM]
CLIENT=800
[SYSTEM_NUM]
SYSNUM=01
[LOGON_METHOD]
; USER_AUTH if standard UID/Password authentication is used
; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
; (load balancing) is used
LOGON_METHOD=USER_AUTH
[GLOBAL_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
; uses a pool of connections to the SAP backend all utilizing a single
; UID/password
UID=
UPASSWORD=
SHAREDCONNECTION=0
GET_PERSONNEL_INFO=
[SERVICE_LOGON]
ENABLED=true
UID=hngu3
UPASSWORD=xxxxxxx
UPASSWORDENCODED=false
[GROUP_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GROUP
; individual user authentication using an SAP Message Server which distributes
; client connections among a "group" of SAP application servers based on load
; balancing criteria
; host name or IP address of SAP Message Server
MESSAGE_SERVER=
GROUP_NAME=
SYSTEM_ID=
CLIENT=
[LANGUAGE]
LANG=EN
[LOGGING]
Level=4
[REQUIRED_BAPI_WRAPPER]
com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

Hi Tahir, please help me check the log below
Agentry Runtime Worker Thread###throwExceptionToClient::begin |
Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER), |
Agentry Runtime Worker Thread###loggedOut::begin |
Agentry Runtime Worker Thread###HNGU3: SESSION END |
Agentry Runtime Worker Thread###BAPI::begin |
Agentry Runtime Worker Thread###create::nulled repository::created new repository |
Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
Madhu

Hi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure

Configuration Issue in User Mapping ..

Hi,
Pls help resolve this issue..
When i go to " UserMapping " option using the "Personalize " link , i get the following error msg..
"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
Also , if i go thru "User Administration -> User Mapping "
then it says,
--"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system .
Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
I am not able to solve this problem..Pls help
Thanks in advance

Hi Venkat,
Here the quick and dirty solution:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
I would rather recommend to install the unlimited strength jurisdiction policy files.
For more info on this, check this thread:
JCE Jurisdiction does not allow Portal to start
Hope this helps,
Robert

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

Configuration Check Error in Managed System Configuration

Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany Pan

Hi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi

EM Configuration issue.

I have installed grid agent on different server. When i ran emctl status agent i am getting below error.
EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL.
OS is AIX
Thanks in advance...

I am in AGENT_HOME.You are under Agent installation that's one thing. You also need to make sure your environment variable ORACLE_HOME point to AGENT_HOME not the database installation.

Cannot connect to the configuration database Error in HTTPS

Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
Prabakar

HI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

OC4J Configuration issue

Hi,
I tried to put my database in Archivelog mode through EM , at the time of restarting the database it didnt start... instance is starting but database is not opening....
I tried this command but its giving error... ( I am running 10g r2 , on RHEL 5 which is install on Oracle virtual toolbox )
emctl start dbconsole
OC4J Configuration issue. /opt/oracle/oraclehome_112/db_1/oc4j/j2ee/OC4J_DBConsole_myhostname_orcl not found.
where orcl is the instance name.
and this directory, OC4J_DBConsole_myhostname_orcl, does not exist on the file system.
In some article I read ... the solution I tried to type...
http://kamranagayev.com/2011/03/21/step-by-step-installing-oracle11g-on-linux/
Feedback no. 19
./emca -deconfig dbcontrol db -repos drop
bash : ./emca : No Such file or Directory
./emca -config dbcontrol db -repos create
Thanks and regards...

Hello;
I'm thinking this step was either missed of you have a typo :
Change the entry of .bash_profile file of the oracle user and add following lines:
vi /home/oracle/.bash_profile
export ORACLE_HOME=/u01/home/oracle/product/11.2.0/db_1
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:$PATHIf your ORACLE_HOME is set it should find the "emca".
You can test by running these export commands at the Linux prompt.
The which command is your friend
which emca
/u01/app/oracle/product/11.2.0.2/bin/emcaBest Regards
mseberg
Edited by: mseberg on Feb 29, 2012 2:52 PM

Ewfmgr: Failed getting protected volume configuration with error 1

Hello,
I created a Windows 7-64 image for an Ivy-Bridge VME card. The image contains EWF with RAM-REG.
The disk was divided into 2 partitions with the windows installer and the image was successfully installed.
As I'm using RAM-REG, all
the disk was allocated.
After the image was installed I tried to run "ewfmgr c:" and got the current status.
Then I created a GHOST image and wrote the image on a new card with a clean disk.
After Windows booted, running "ewfmgr c:" gave:
Failed getting protected volume configuration with error 1
I found few threads on this issue but failed to understand what is the right solution.
Can you help ?
Thanks,
Zvika

The Problem is always Volumeid related (diskid)
Explaination:
Sysprep creates new bcd for the System. - Therefore it's recommended to use sysprep (and SID and so on..) but if you're lazy or don't have Domain Controller and so on or always use physical seperated (better not Internet connected) machines you would be
totaly fine with non-syspreped Images. You only Need updated/new bcd.
Captured wim has 'old' bcd (if there is no seperated MSR Partition) you can update this 3 entries within winpe and your Image will boot:
bcdedit /store c:\boot\BCD /set {BOOTMGR} device boot
bcdedit /store c:\boot\BCD /set {DEFAULT} device PARTITION=C:
bcdedit /store c:\boot\BCD /set {DEFAULT} osdevice PARTITION=C:
(boot could also be Partition=c: or all entries could be boot - and /store is not needed as in winpe bcdedit automatically Redirects the commands into the other/System (found) bcd. But i always recommand to specify the bcd store you want to edit, like in
this lines)
The definition of "C:" in this Parameter is 'translated' into volumeid/diskid. - So in the bcd is not "C:" it's some DiskID.
Instead of the 3 entries you can just create a whole new bcd with updated volumeid/diskids. --> It would be enough to run bcdboot /s C:\ (or whatever the current boot (c:\) Partition is.
EWF needs to be reconfigured as it also works with Volume/Diskids. So it needs additional command while running (online).
ewfcfg /install-configuration for win7
rundll32 ewfdll.dll,ConfigureEwf for win xpe/wes2009.
Windows Embedded Developer and Scripting Guy //Germany (http://www.wesnext.com)

OC4J Configuration issue Oracle 11g R2 Windows XP and Windows 7

Hallo!I have installed Oracle Database 11.2.0.1.0 on both Windows XP and Windows 7 on 2 different machines.
Before installing on both OSs,I had installed Microsoft Loopback Adapter and had set hostname as JOEY-PC and IP address 192.168.0.X.Once the installations were complete and I restarted the machines,I could not start OEM and the error below appears
C:\Documents and Settings\JOEY>emctl start dbconsole
OC4J Configuration issue. C:\app\JOEY\product\11.2.0\dbhome_1/oc4j/j2ee/OC4J_DBConsole_JOEY-PC_orcl not found.
When I went to the C:\app\JOEY\product\11.2.0\dbhome_1\oc4j\j2ee directory,I found the folder OC4J_DBConsole_localhost_orcl instead of OC4J_DBConsole_JOEY-PC_orcl.
I assumed that by using Microsoft Loopback Adapter,I would avoid the error above and that the OC4J_DBConsole folder would permanently remain as OC4J_DBConsole_JOEY-PC_orcl instead of OC4J_DBConsole_localhost_orcl.
Why is this folder changing its name and how can I resolve this issue?
Thanks.

Pl post the contents of the file C:\WINDOWS\System32\drivers\etc\hosts on both servers
What steps did you take to set the hostname to JOEY-PC ?
Srini

Adobe Document Service Configuration Issue

Hi All,
Actually we have installed SAP ADS 7.4 ON SAP NetWeaver 7.4 JAVA STACK HUB
SYSTEM.
I did the configuration as per the SAP Standard documents. The ABAP
connection in ADS is working but ADS configuration in an ABAP environment
is not working.
While I am executing the form in SFP, I am getting the error message:
ADS:com.adobe.ProcessingException: com.adobe.Processin(200101).
While I am testing the ADS configuration in ABAP environment, I am getting the error:
ADS: com.adobe.ProcessingException:com.adobe.Processin(200101).
While I am checking the Destination service in SAP ECC I am getting theerror: SYSTEM ERROR:
ADS: com.adobe.ProcessingException:com.adobe.ProcessingException: XMLFM Exception during render:com.adobe.ProcessingException(200,101).
For the above issues I raised ticket to SAP. They suggested below steps, So I did the first three steps but I don't know how to do the 4th and 5th steps means how to copy the and extract the files.
1. Shutdown J2EE engine
2. Rename the folder
/usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap
to antoher folder name (ex. adssap.old)
3. Start J2EE engine
4. Make sure XMLFormService_native.zip is copied under os_libs fold
during starting up engine (synchronize phase)
5. Also make sure XMLform.exe is extracted under
/usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap/XMLFormService/bin
Please help me from where to copy the zip file mentioned in 4th step and find the attachments for error screen shots for reference.
Your help will be appreciated.
Thanks&Regards,
Ravikiran.

Hi Varun,
Actually we installed ADS in NW 7.4 and while I am doing configuration I am getting the above issues.
While I am executing the any form means (standard also) I am getting the same issues.So I think it is may be configuration issue.
I raised ticket to SAP with the below error they suggested above five steps.
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101).
Thanks&Regards,
Ravikiran.

EM Configuration issue error

Similar Messages

Maybe you are looking for