Emac taking 1/2 hour to load, then system just freezes

Very recently, over the past couple of days, when I switch my eMac on it takes a good 20-30mins to load up. Then, when you try and open any application, eg. Safari, it just freezes and nothing works. You have to take the power cord out to turn the thing off. Does anyone have any ideas? Could it have some sort of virus as I was not aware of many viruses out there for Apple?
Any help is much appreciated as I was about to backup my music on iTunes this week and I think I now may struggle and lose all my music? (I know, stupid me and my fault :o) )
Many thanks,

Pulling the power cord on a running Mac will most likely damage the disk directory; a damaged directory could cause the symptoms you describe in the first place. It's marginally better to force a shutdown by pressing and holding the power button for about 5 seconds until the display turns off. Use your OS X Install disc to boot the computer and run Repair Disk, as described in Using Disk Utility and fsck, and take note of any errors reported. If Repair Disk reports making repairs, re-run it until it gives a clean bill of health or reports being unable to make repairs. DiskWarrior can often repair directory errors that Repair Disk cannot.
Do you recall how much free space is on the hard drive? If the drive is nearly full, the Mac may not start at all or may perform erratically. You might in such a case be able to Start Up in Safe Mode and manually clear enough unneeded files to free up 5 GB or so of free space on the hard drive. Whatsize can help you find large unneeded files, such as old .dmg disk images from installers you've already run. Since your profile shows OS X 10.3.x, you may also want to refer to Free Space Disappears.

Similar Messages

  • I need help restoring because it dose it but then it just freezing an its just still like tat plz help i sen u a pick apple wats u email 2 i can sen u a pick

    i need help restoring because it dose it but then it just freezing an its just

    If u haven't resolved this issue yet, I just did.
    What I did:
    1. Toggle the hold switch (turn it on and off)
    2. Reset to 'Disk Mode'
    by pressing the 'Play' and center buttons
    simultaneously
    (it may take a couple of trials to get it right)
    3. Update iPod with latest iTunes in Disk mode.
    4. Incase the 'Can't find firmware' error msg is displayed,
    follow the instructions in the link given below:
    http://docs.info.apple.com/article.html?artnum=304309
    Toshiba SatelliteA30-203, Compaq Presario 3000   Windows XP Pro  

  • My purchased movies are taking over an hour to load.  Why?

    Apple TV is telling me (suddenly) that my purchased movies will take over an hour to load and play.  This literally started happening 10 minutes into a movie.  It's never taken more than 10 seconds to load in the past.  My internet connection is up and working normally.  Why would this start happening so suddenly?

    Power cycle the ATV and router then try again.

  • IMovie 08 really slow to load then prone to freezing up

    Hi
    I have been using iMovie 08 for about 9 months. I have an iMac 2.4GHZ Intel with 3 GB of SDRAM running OS X 10.5.5 and more than 90 GB free space on my hardrive.
    But over the past few weeks whenever I start it up it takes anywhere from 90 minutes to over 2 hours to load! And this is with nothing else running at all.
    I have no events in iMovie that need loading --- no events! --- but I do have 12 open projects on my internal drive (none of them HD) each about 6 minutes long, and none with any video over 90mb.
    When iMovie does finally load it works fine for awhile, anywhere from 15 minutes to 5 or 6 hours at a time. But as I work at some point it eventually always hangs up and I have to force quit it. I try leaving it up over night or over the weekend with nothing else running but it never comes back.
    I have tried fixing permissions, deleting the plist, running maintenance scripts through Onyx, and even reloading the app, but nothing changes its terribly slow loading and freezing up habit. The thing just won’t load promptly and keeps hanging after awhile. At this point it’s become all but useless.
    Anyone else experiencing this? Anyone have suggestions for repairing it?
    Please help. Thanks.

    Those QuickTime items seem Kosher enough..
    Well, if you don't want to do an update, here are a few more ideas:
    You say that you don't have any other accounts. Try making a new one - in System Preferences>Accounts, and then click on the little + sign at the bottom of the left-hand column. If you're creating a password for this new account, I suggest writing it down!
    Then log out of your normal account (..under the apple symbol at top-left of the screen..) and log into the new account.
    If there is a difference ..i.e; if iMovie loads quickly, as normal.. then the fault lies in something within (..possibly a folder within..) your normal 'Home' folder, and not in Applications, nor the main Libraries, nor anywhere that elements of the iMovie program itself are stored. Possibly your iMovie Preference file (..see next paragraph).
    If it does NOT make a difference ..i.e; it's still slow.. then Quit from iMovie, log out of that new User account and log back into your normal account, and go to <your 'Home' folder>/Library/Preferences and delete the file called "com.apple.iMovie7.plist" (..and if there are any other "com.apple.iMovie.plist" files there, delete those, too). That Preference file may be corrupt, and so iMovie may be waiting to try and find your last-run iMovie project, but under a different, corrupt, filename.
    If, on restarting iMovie, that doesn't fix it, then I'd guess that there's a corrupt item within the iMovie 'package'. (..The iMovie program, in Applications, isn't just a program: if you Ctrl-click on its name and choose 'Show Package Contents' you'll find many different items which, together, make up the iMovie 'program'..)
    That's the point at which to consider replacing the corrupt iMovie 'package' with a fresh one from your original disc(s). If you haven't backed up your Applications via Time Machine, then you can't Restore a pre-problem version of iMovie from your TM backups. But restoring from TM is simpler than extracting iMovie from your original disc(s). (..It's what TM is for; get a corrupt item? ..Simply and easily restore it with just a few clicks..)
    So - unless anyone else comes up with better ideas! - I'd say (..after trying those diagnostics and suggestions above, and they didn't improve things..) Restore your version of iMovie. I can't think of anything else.

  • I'm getting the rainbow wheel when I try tp pen in internet page (Safari). The page half loads then appears to freeze with the rianbow wheel.  I get the same result when I try to stream a movie from NETFLIX.  Freezes up rather than plays (after loading).

    I get the rainbow wheel when I try to open an internet page. It loads halfway, then freezes, with the rainbow wheel whirring around. Smae thing happens when I try to stream a movie on Netflix.  The movie loads, then the wheel shows up and the screen freezes.  Same thing when I try a DVD, it takes the disc, but won't play when I hit on PLAY.
    I am repair permissions, and all that I can do, but I am a novice.  Any help would be greatly appreciated because I spend big bucks and drive 40 miles to get Apple help.
    Sharon in the woods of Idaho

    Welcome to Apple Support Communities.
    If your profile info is up to date, you probably have a 2006 or 2007 MacBook with a CoreDuo or Core2Duo.
    It probably came with 512MB or 1GB RAM memory and a 60, 80, or 120GB hard drive.
    You're still running OS X Tiger, 10.4.
    Your DVD drive may be dirty or wearing out.
    For specifics about your computer, click on the  Apple Logo in the menu bar, then About This Mac, and More Info... to find details.)
    You may be running short of hard disk space. You should have at least 10% free, or 10 to 15GB free for best performance. Less than that, and your hard disk is spending lots of time searching for places to store data.
    Complex web pages and sites like Facebook and Twitter, and pages using Adobe Flash, and high-bandwidth applications like video streaming from NetFlix can all cause your computer to run slowly, and the fan to run at high speed, because the processor is working hard. Conversely, email is not terribly resource-intensive, and probably still works pretty well.
    Several things can each provide a small performance increase (listed in no particular order):
    Adding more RAM memory. Upgrade to 2Gb to give your programs a bit of 'breathing room', especially if you are running more than one program at a time.
    Erasing the hard drive and reinstalling the current operating system and programs from scratch. This erases all your existing programs and data. Unless you have backups and program discs, you lose everything currently stored on it.
    Installing a higher capacity, faster hard disk, say 250GB or 320GB will give your programs and data more space, and perhaps faster access if you replace the factory 5400rpm drive with a 7200 rpm drive. If your current hard disk is nearly full (less than 10% free space), the drive has to 'thrash' to free space to store information. 
    Upgrading the operating system to OS X 10.5 Leopard or OS X 10.6 Snow Leopard. Both are discontinued OS X versions, still available to order directly from Apple, but not likely found on a store shelf any longer. An upgrade to OS X 10.7 Lion might not be possible for your MacBook (details here: http://www.apple.com/macosx/how-to-buy/), and Lion would likely cause a further slowdown, because honestly, Lion is optimized for newer, faster dual-core or quad-core computers with fast video chipsets and 4GB or more of RAM.
    A faster internet connection, for example: I switched internet providers to get a 3.0Mb DSL connection (up from a 512Mb connection) for an extra $10 per month, and saw downloads and internet browsing speeds increase dramatically.  With the slower connection, it was not possible to watch video.
    Will all of these upgrades together get you close to the performance of the latest MacBook Air or MacBook Pros? NO!
    Ultimately, you have a 4- or 5-year-old computer, and spending up to several hundred dollars for upgrades might not be a worthwhile investment for you, versus applying that much money toward the cost of a new(er) Mac, and perhaps passing your MacBook on to a friend, child, or grandchild who needs mainly email capability.
    If a brand new Apple is not in the budget, consider a refurbished Mac from the Apple Store online. These are reliable computers from 'last year's models' and have the same 1-year Applecare warranty as a brand new model, and often sell at a discount of 10 to 30 percent of the price when the model was introduced.
    I'm using a mid-2007 MacBook, purchased as a refurb from Apple in late 2007. It came with 1GB RAM, a 120GB 5400 rpm hard drive, and OS X 10.4 Tiger. Over the years, I've upgraded it twice. Firs to 2GB, then to 4GB RAM, to a 320GB drive, then to a 500GB 7200 rpm hard drive, and to OS X 10.5 Leopard, and then to OS X 10.6 Snow Leopard. Rather than one more round of upgrades to OS X 10.7 Lion, I'm saving for a newer MacBook Pro or MacBook Air at some time in the future.

  • Installed Lion, change wallpaper, "desktop & screensaver" freeze, force quit, then "system preferences" freeze and need force quit every time

    After Lion install, tried to change wallpaper in "system preferences"->"desktop & screensaver" appeared but immediatly freeze, so force quit.
    Then System preference pane as it immediatly freezes if I try to open it.  Have to "force quit" each time.
    Found many people have the exact issue and highly likely it's the bug of lion.
    Anybody found a solution?  Thx.

    It has to do with a problem accessing the images on the home>images folder. To solve it, just move its content (iphoto library included) to another place. Then, restart System Preferences. Moving your iPhoto library to another location seems to fix the problem. I am sure Apple will issue an update to correct this problem. But, for now this seems to work for me.

  • I have a new unlocked iphone3gs. I cannot get the video to work. When I try to record video I am not offered any options. It films until I tap the red button, but then everything just freezes. I

    I have a new (from Apple) unlocked iPhone3gs. I cannot get the video recorder to work. When I take video I am not offered any options at the start or the end of filming. The screen freezes when I hit the red stop button. But that's it. I have to hit the home button to get out of that. And none of the v-recordings can be found on my phone anywhere.
    Also I'm having trouble with Bluetooth. My Mac says it's paired with the phone, but the phone says not; even though It accepts the pairing code from the Mac. I'm getting very frustrated with these problems. I came on here to find the user manuel, but can only find the fingertip manuel and the product license manuel. Both of which I have in hard copy.
    And the most annoying thing is the sound on the calls. I can hardly hear the caller.
    Anyone got any helpful advice?
    Thanks, Elizabeth

    Robert or Elizabeth...
    Sync media using iTunes, not Bluetooth.
    When the screen freezes on the iPhone, try "resetting".
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    And this link is for the iPhone 3GS user guide >  http://manuals.info.apple.com/en_US/iPhone_iOS3.1_User_Guide.pdf
    Main iPhone Support >  Apple - Support - iPhone
    Serously doubt this is a "new" iPhone 3GS. More likely refurbished.

  • Itunes store takes up to an hour to load front page

    we just got a new mac and itunes takes up to an hour to load the front page of the store, when it finally does load if you click on tv shows (all I have done so far) it takes over an hour and by then I just gave up. Our internet connection is super fast. It says all the updates are current.

    Are you connected via a router? Could be the router setting. Try connecting directly to your modem and see what happens. Worth a shot.
    From there, if it doesn't help, maybe look into your security settings. Play around with your firewall and anti-virus if you have them. Maybe disable them for a bit and see if the wait decreases.

  • Rented itunes movie to play on iPad mini 2 and black screen appears with loading then goes back to homepage? Help?

    I rented an itunes movie to watch on my iPad mini 2. Every time I press the play icon the screen goes black, says it's loading then it just goes back to title page. Help please? Thanks.

    It has fully downloaded i.e. there isn't a Downloads tab in the iTunes store app with that film listed (Downloads won't show if there are no outstanding downloads) ?
    If not then if you search for the film via the iPad's spotlight search screen (pull down the centre of the homescreen, but not from the very top of the screen) does it play from there or does that also fail to play ?
    If that also fails then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I am running Windows 7 Enterprise. I want to upgrade to a newer version of itunes. I click on help then click on check for upgrades. When I try to upgrade/install the upgrade for itunes it loads 52MB of the required 56MB and then just freezes ?

    I am running Windows 7 Enterprise.
    I need to upgrade my version of Itunes from version 7 to version 10 or 11.
    I go to Help and click on Search for Upgrades.
    I then select Upgrade Itunes.
    The system starts to upgrade and download the new software.
    It gets to 52.60 MB of 56 MB and then it just freezes / sticks and does not go any further ?
    I have tried to upgrade on a number of occasions but the same thing happens each time.
    Any help please ?

    Answer is in the original post.

  • When I rent a movie using Apple TV, it takes several hours to load and then I select watch later. When I go to my rented movies and try to watch it , it starts loading all over again. This can't be normal. Is there something that I am doing wrong?

    When I rent a movie using Apple TV,it takes several hours to load. At this point, I opt to watch later. When I try to watch the movie, it starts loading again and tells me that it will be ready to watch in one hour forty four minutes. This can't be normal. Is there something I am doing wrong? Any suggestions.

    If it's taking several hours then that is likely due to your internet connection. You can verify at speedtest.net
    6mbps required for instant 720P
    8mbps for 1080P
    You can switch to SD in the settings (which only requires 3mbps)
    You can also check istumbler or netstumbler for interference
    Make sure you are on your ISPs DNS
    The reloading is normal. There is no accessible storage on ATV. The small flash is used for caching streamed content, if you access other things or turn the device off it will be flushed.

  • HT201328 Hello,  I needed to do a hard reset on my iPhone 3GS and it's taking me too much time. It's taking almost 12 hours by now!!!!   I did it by going to "Settings, General, Reset, Erase All Content and Settings", confirm it and then the iPhone turns

    Hello,
    I needed to do a hard reset on my iPhone 3GS and it's taking me too much time. It's taking almost 3 hours by now!!!!
    I did it by going to "Settings, General, Reset, Erase All Content and Settings", confirm it and then the iPhone turns off, gets the screen black with only the animated circle going on. And it's been there since then.
    Is this a symptom of something bad? Should I do the hard reset by another way?

    Hello Ali Syed,
    It sounds like your phone is stuck at the spinning gear icon on the screen after Erasing all Content and Settings on your device. I would start by resetting the device with this process:
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From: Turn your iOS device off and on (restart) and reset
              http://support.apple.com/kb/ht1430
    If the issue persists you may need to put the phone into recovery mode, and then restore it with iTunes as a new device:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT4743 why is it taking freeking hours to load my purchased show from my computor onto apple tv?

    why is it taking freeking hours to load my purchased show from my computor to my apple tv so i can watch it?

    It shouldn't.
    If internet playback is fine it's likely a problem with itunes or security software on teh computer as good internet playback performance would suggest the LAN is ok.
    If you're seeing a spinning icon on AppleTV restart it, itunes andf your router - doesn't alweays work but often does.

  • Impact of hourly Data load on BW and R/3

    Hi...
    As of now, the delta load from R/3 to BW is taking place every night. But, the users claim that they need it hourly.
    Is this practice (hourly data load from r/3 to bw) is usually done? What would be the impact on BW and R/3? (any performance issues!)
    What is the minimum best time interval for the delta loads?
    Thanks,
    Sai.

    I think you have to let user business requirements dictate the answers as long as there are not any system or application constraints.
    We have a load that at run 4 times a day during a 9 hour window, once at the beginning to pickup any overnight work and then about every 3 hrs during the business day to pick up new information that is needed.
    No discernible impact on R3 here, but that probably depends on your transaction volume and efficiency of the extractors that are used.
    The user base does need to understand that loads will occur during the day and that depending on when the run a query, the results could change - but presumably that's the whole reason you are doing this in the first place.
    This does result in more Requests, so you want to make sure you are compressing your cubes based on the Request's age rather number of requests. 
    Can't really think of much else.

  • Why is installing 3 applications from a creative cloud packager taking over an hour?

    Dear Adobe community,
    I am trying to install 3 Creative Cloud applications, (Illustrator, photoshop, and indesign) on a Windows 7 Hpz420 workstation from a USB hard drive and it is taking over an hour to complete.  i created a package of the 3 applications using the CC packager and move the package over to a USB drive.  Then I start the installer exe it runs and completes, but the installation takes over an hour and 1/2.  My installation of Creative Suite 5.5 from a similar USB hard drive was much quicker, about 1/2 hour.
    I don't want to use a remote installer like AAMEE. Is there a different way to create a package that is more efficient? I also don't want to redown the applications everytime I need to install them on a machine and utilize my network bandwidth.
    Is this normal ?  I have rebuilt the package with the same results and have installed CC on two different machines with the same results.  I did not see anything in the forums about the installation being so slow so I am concern that I have missed something or that my results are not normal.
    Your help is appreciated.
    Mike

    My "Gaming" computer (Toshiba Qosmio X-70A, w/ 32GB RAM, i7 Intel processors @2.7 Ghz, w/ 250GB SSD, 750GB high-speed 7,200 RPM primary & 1TB SSD/HD hybrid drive) was purchase specifically, by me, to learn & use the Adobe "Cloud" Apps with.  This computer is a beast. <And - yet> it takes me days, literally <DAYs> to download all the apps I am using/studying.
    I (last week) recently had my 1st "total meltdown" w/ Win 8.1-Pro (what a total P.O.S. "OS" this is!) & have faced the daunting task of re-installing ALL of the Adobe SW available over the "Creative Cloud". This will take days (w/ a direct DSL link to a Cat-6 cable; not on Wi-Fi) to "re-install" all the "Creative Cloud" software I was learning/working with. Insane. I have never seen anything like this!
    So, "DLi" - I agree! Adobe's SW (& HW) Engineers don't give a stuff about your time nor mine.
    The only things that are of importance to them are (#1 - "Keeping their jobs") ... metering out their "Creative Cloud" in a manner which allows them to investigate EVERY byte on your computer/server/device BEFORE allowing you to use it . . . (hmmm....I do wonder how many dollars per month that information is worth to the NSA / per seat)?) ... and making it "a nightmare" for the user.
    What an insult!
    What an horrific slap in the face to each & every one of Adobe's "Creative Cloud" paying customers! (Uhhhm, that'd be you and that'd be me, too).

Maybe you are looking for

  • SAPRouter set up in Solman 7.1 sr1 release

    Dear All, we completed the installation Of Solman Server 7.1.  Now we are in the process of activity "Configuration Of SOlman Server ". RFC Destination SAP OSS not working. Connection and Authorization test for SAPOSS is failing with "Connection Erro

  • ITunes can no longer find my iPhoto - no iPhone photo sync ability...help!?

    Hello...okay, some data - I am currently running Lion and all the latest software updates, I am also running multiple users on this iMac, I am also sharing the iPhoto library using the "Shared Library" method.  My wifes iPhone (via her own account on

  • Need help in deleting photo album...please

    I transeferred a photo album to my idop nano directly from windows without using Adobe Photoshop or any Adobe program..and i cant delete the photo album because the iPhoto menu does not show on my iTunes...?

  • Environment variable setup

    I am using WIN XP PRO and installed jdk1.5.0_07 as ADMIN. Added jdk1.5.0_07\bin to the right end of lines of both CLASSPATH and path. In the cmd prompt window the javac is not recognized as an internal or external command, operable program or batch f

  • What is the standard field in CRM to store the VAT number from ECC

    Dear gurus, I am trying to find if we have "VAT number" as standard field in CRM. I tried finding in CRM but could not find. The requirement is to bring the "VAT number" data from ECC to CRM. So if there is any corresponding CRM field to store that t