Emacs crashes Xorg
Hello. I have a unique problem that I have been hitherto unable to solve: Emacs crashes Xorg. These crashes don't always happen instantly -- in fact there doesn't appear to be any discernible pattern to them whatsoever.
About 20% of the time, Xorg (and consequently Emacs) will crash as soon as I enter the start command in a terminal emulator. The remaining 80% of the time, it will crash somewhere between 1 and 5 minutes into an Emacs session. I am running OpenBox and LightDM on top of X, and I don't know if that information is relevant to you or not.
Here is the output of Xorg log
[1119863.716]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[1119863.716] X Protocol Version 11, Revision 0
[1119863.716] Build Operating System: Linux 3.19.2-1-ARCH x86_64
[1119863.716] Current Operating System: Linux ArtisanBox 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
[1119863.716] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1441102d-dc98-4815-b6eb-a21f7b3802ad rw quiet
[1119863.717] Build Date: 14 April 2015 10:34:18AM
[1119863.717]
[1119863.717] Current version of pixman: 0.32.6
[1119863.717] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1119863.717] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1119863.717] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 24 18:57:12 2015
[1119863.717] (==) Using config file: "/etc/X11/xorg.conf"
[1119863.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[1119863.717] (==) No Layout section. Using the first Screen section.
[1119863.717] (==) No screen section available. Using defaults.
[1119863.717] (**) |-->Screen "Default Screen Section" (0)
[1119863.717] (**) | |-->Monitor "<default monitor>"
[1119863.717] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[1119863.717] (==) Automatically adding devices
[1119863.717] (==) Automatically enabling devices
[1119863.717] (==) Automatically adding GPU devices
[1119863.717] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[1119863.717] Entry deleted from font path.
[1119863.717] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[1119863.717] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[1119863.717] Entry deleted from font path.
[1119863.717] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[1119863.717] Entry deleted from font path.
[1119863.717] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[1119863.717] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[1119863.717] Entry deleted from font path.
[1119863.717] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[1119863.717] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[1119863.717] (==) ModulePath set to "/usr/lib/xorg/modules"
[1119863.717] (**) Extension "Composite" is enabled
[1119863.717] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[1119863.717] (II) Loader magic: 0x815d80
[1119863.717] (II) Module ABI versions:
[1119863.717] X.Org ANSI C Emulation: 0.4
[1119863.717] X.Org Video Driver: 19.0
[1119863.717] X.Org XInput driver : 21.0
[1119863.717] X.Org Server Extension : 9.0
[1119863.718] (EE) systemd-logind: failed to get session: PID 21863 does not belong to any known session
[1119863.719] (II) xfree86: Adding drm device (/dev/dri/card0)
[1119863.719] (II) xfree86: Adding drm device (/dev/dri/card1)
[1119863.720] (--) PCI: (0:1:5:0) 1002:9616:1043:8388 rev 0, Mem @ 0xc0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000c000/256
[1119863.720] (--) PCI:*(0:2:0:0) 1002:954f:1682:2920 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[1119863.720] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[1119863.720] (II) LoadModule: "glx"
[1119863.720] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1119863.722] (II) Module glx: vendor="X.Org Foundation"
[1119863.722] compiled for 1.17.1, module version = 1.0.0
[1119863.722] ABI class: X.Org Server Extension, version 9.0
[1119863.722] (==) AIGLX enabled
[1119863.722] (==) Matched ati as autoconfigured driver 0
[1119863.722] (==) Matched ati as autoconfigured driver 1
[1119863.722] (==) Matched ati as autoconfigured driver 2
[1119863.722] (==) Matched modesetting as autoconfigured driver 3
[1119863.722] (==) Matched fbdev as autoconfigured driver 4
[1119863.722] (==) Matched vesa as autoconfigured driver 5
[1119863.722] (==) Assigned the driver to the xf86ConfigLayout
[1119863.722] (II) LoadModule: "ati"
[1119863.722] (WW) Warning, couldn't open module ati
[1119863.722] (II) UnloadModule: "ati"
[1119863.722] (II) Unloading ati
[1119863.722] (EE) Failed to load module "ati" (module does not exist, 0)
[1119863.722] (II) LoadModule: "modesetting"
[1119863.722] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[1119863.722] (II) Module modesetting: vendor="X.Org Foundation"
[1119863.722] compiled for 1.17.1, module version = 1.17.1
[1119863.722] Module class: X.Org Video Driver
[1119863.722] ABI class: X.Org Video Driver, version 19.0
[1119863.722] (II) LoadModule: "fbdev"
[1119863.722] (WW) Warning, couldn't open module fbdev
[1119863.722] (II) UnloadModule: "fbdev"
[1119863.722] (II) Unloading fbdev
[1119863.722] (EE) Failed to load module "fbdev" (module does not exist, 0)
[1119863.722] (II) LoadModule: "vesa"
[1119863.722] (WW) Warning, couldn't open module vesa
[1119863.722] (II) UnloadModule: "vesa"
[1119863.722] (II) Unloading vesa
[1119863.722] (EE) Failed to load module "vesa" (module does not exist, 0)
[1119863.723] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[1119863.723] (++) using VT number 1
[1119863.723] (II) modeset(0): using drv /dev/dri/card1
[1119863.723] (II) modeset(G0): using drv /dev/dri/card0
[1119863.723] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[1119863.723] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[1119863.723] (==) modeset(0): RGB weight 888
[1119863.723] (==) modeset(0): Default visual is TrueColor
[1119863.723] (II) Loading sub module "glamoregl"
[1119863.723] (II) LoadModule: "glamoregl"
[1119863.723] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[1119863.727] (II) Module glamoregl: vendor="X.Org Foundation"
[1119863.727] compiled for 1.17.1, module version = 1.0.0
[1119863.727] ABI class: X.Org ANSI C Emulation, version 0.4
[1119863.727] (II) glamor: OpenGL accelerated X.org driver based.
[1119863.765] (II) glamor: EGL version 1.4 (DRI2):
[1119863.767] (II) modeset(0): glamor initialized
[1119863.767] (II) Loading sub module "dri2"
[1119863.767] (II) LoadModule: "dri2"
[1119863.767] (II) Module "dri2" already built-in
[1119863.788] (II) modeset(0): Output VGA-1 has no monitor section
[1119863.808] (II) modeset(0): Output DIN-0 has no monitor section
[1119863.842] (II) modeset(0): Output DVI-0 has no monitor section
[1119863.861] (II) modeset(0): EDID for output VGA-1
[1119863.881] (II) modeset(0): EDID for output DIN-0
[1119863.916] (II) modeset(0): EDID for output DVI-0
[1119863.916] (II) modeset(0): Manufacturer: GSM Model: 5819 Serial#: 28153
[1119863.916] (II) modeset(0): Year: 2011 Week: 3
[1119863.916] (II) modeset(0): EDID Version: 1.3
[1119863.916] (II) modeset(0): Digital Display Input
[1119863.916] (II) modeset(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[1119863.916] (II) modeset(0): Gamma: 2.20
[1119863.916] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[1119863.916] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[1119863.916] (II) modeset(0): First detailed timing is preferred mode
[1119863.916] (II) modeset(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
[1119863.916] (II) modeset(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
[1119863.916] (II) modeset(0): Supported established timings:
[1119863.916] (II) modeset(0): 720x400@70Hz
[1119863.916] (II) modeset(0): 640x480@60Hz
[1119863.916] (II) modeset(0): 640x480@75Hz
[1119863.916] (II) modeset(0): 800x600@60Hz
[1119863.916] (II) modeset(0): 800x600@75Hz
[1119863.916] (II) modeset(0): 1024x768@60Hz
[1119863.916] (II) modeset(0): 1024x768@75Hz
[1119863.916] (II) modeset(0): 1280x1024@75Hz
[1119863.916] (II) modeset(0): Manufacturer's mask: 0
[1119863.916] (II) modeset(0): Supported standard timings:
[1119863.916] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[1119863.916] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[1119863.916] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[1119863.917] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[1119863.917] (II) modeset(0): Supported detailed timing:
[1119863.917] (II) modeset(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[1119863.917] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[1119863.917] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[1119863.917] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[1119863.917] (II) modeset(0): Monitor name: E2241
[1119863.917] (II) modeset(0): Serial No: 103TPHG0U153
[1119863.917] (II) modeset(0): EDID (in hex):
[1119863.917] (II) modeset(0): 00ffffffffffff001e6d1958f96d0000
[1119863.917] (II) modeset(0): 0315010380301b78ea9535a159579f27
[1119863.917] (II) modeset(0): 0e5054a54b00714f8180818fb3000101
[1119863.917] (II) modeset(0): 010101010101023a801871382d40582c
[1119863.917] (II) modeset(0): 4500dd0c1100001e000000fd00384b1e
[1119863.917] (II) modeset(0): 530f000a202020202020000000fc0045
[1119863.917] (II) modeset(0): 323234310a20202020202020000000ff
[1119863.917] (II) modeset(0): 003130335450484730553135330a00d5
[1119863.917] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[1119863.917] (II) modeset(0): Printing probed modes for output DVI-0
[1119863.917] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[1119863.917] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[1119863.917] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[1119863.917] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[1119863.917] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[1119863.917] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[1119863.917] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[1119863.917] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[1119863.917] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[1119863.917] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[1119863.917] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[1119863.917] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[1119863.917] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[1119863.917] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[1119863.917] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[1119863.917] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[1119863.917] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[1119863.917] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[1119863.917] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[1119863.917] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[1119863.917] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[1119863.917] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[1119863.917] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[1119863.917] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[1119863.917] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[1119863.917] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[1119863.917] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[1119863.917] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[1119863.917] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[1119863.917] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[1119863.917] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[1119863.917] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[1119863.917] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[1119863.917] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[1119863.917] (II) modeset(0): Output VGA-1 disconnected
[1119863.917] (II) modeset(0): Output DIN-0 disconnected
[1119863.917] (II) modeset(0): Output DVI-0 connected
[1119863.917] (II) modeset(0): Using exact sizes for initial modes
[1119863.917] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
[1119863.917] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[1119863.917] (==) modeset(0): DPI set to (96, 96)
[1119863.917] (II) Loading sub module "fb"
[1119863.917] (II) LoadModule: "fb"
[1119863.917] (II) Loading /usr/lib/xorg/modules/libfb.so
[1119863.918] (II) Module fb: vendor="X.Org Foundation"
[1119863.918] compiled for 1.17.1, module version = 1.0.0
[1119863.918] ABI class: X.Org ANSI C Emulation, version 0.4
[1119863.918] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[1119863.918] (==) modeset(G0): RGB weight 888
[1119863.918] (==) modeset(G0): Default visual is TrueColor
[1119863.918] (II) Loading sub module "glamoregl"
[1119863.918] (II) LoadModule: "glamoregl"
[1119863.918] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[1119863.918] (II) Module glamoregl: vendor="X.Org Foundation"
[1119863.918] compiled for 1.17.1, module version = 1.0.0
[1119863.918] ABI class: X.Org ANSI C Emulation, version 0.4
[1119863.918] (II) glamor: OpenGL accelerated X.org driver based.
[1119863.919] (II) glamor: EGL version 1.4 (DRI2):
[1119863.920] (II) modeset(G0): glamor initialized
[1119863.920] (II) Loading sub module "dri2"
[1119863.920] (II) LoadModule: "dri2"
[1119863.920] (II) Module "dri2" already built-in
[1119863.941] (II) modeset(G0): Output VGA-1-0 has no monitor section
[1119863.944] (II) modeset(G0): Output DVI-1-0 has no monitor section
[1119863.965] (II) modeset(G0): EDID for output VGA-1-0
[1119863.967] (II) modeset(G0): EDID for output DVI-1-0
[1119863.967] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[1119863.967] (==) modeset(G0): DPI set to (96, 96)
[1119863.967] (II) Loading sub module "fb"
[1119863.967] (II) LoadModule: "fb"
[1119863.967] (II) Loading /usr/lib/xorg/modules/libfb.so
[1119863.967] (II) Module fb: vendor="X.Org Foundation"
[1119863.967] compiled for 1.17.1, module version = 1.0.0
[1119863.967] ABI class: X.Org ANSI C Emulation, version 0.4
[1119863.967] (==) Depth 24 pixmap format is 32 bpp
[1119864.022] (==) modeset(G0): Backing store enabled
[1119864.022] (==) modeset(G0): Silken mouse enabled
[1119864.022] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[1119864.022] (==) modeset(G0): DPMS enabled
[1119864.022] (II) modeset(G0): [DRI2] Setup complete
[1119864.022] (II) modeset(G0): [DRI2] DRI driver: r600
[1119864.022] (II) modeset(G0): [DRI2] VDPAU driver: r600
[1119864.070] (==) modeset(0): Backing store enabled
[1119864.070] (==) modeset(0): Silken mouse enabled
[1119864.070] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[1119864.070] (==) modeset(0): DPMS enabled
[1119864.070] (II) modeset(0): [DRI2] Setup complete
[1119864.070] (II) modeset(0): [DRI2] DRI driver: r600
[1119864.070] (II) modeset(0): [DRI2] VDPAU driver: r600
[1119864.070] (--) RandR disabled
[1119864.077] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[1119864.077] (II) AIGLX: enabled GLX_ARB_create_context
[1119864.077] (II) AIGLX: enabled GLX_ARB_create_context_profile
[1119864.077] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[1119864.077] (II) AIGLX: enabled GLX_INTEL_swap_event
[1119864.077] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[1119864.077] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[1119864.077] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[1119864.077] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[1119864.078] (II) AIGLX: Loaded and initialized r600
[1119864.078] (II) GLX: Initialized DRI2 GL provider for screen 0
[1119864.081] (II) modeset(G0): Damage tracking initialized
[1119864.084] (II) modeset(0): Setting screen physical size to 508 x 285
[1119864.130] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[1119864.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1119864.130] (II) LoadModule: "evdev"
[1119864.130] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[1119864.131] (II) Module evdev: vendor="X.Org Foundation"
[1119864.131] compiled for 1.17.1, module version = 2.9.2
[1119864.131] Module class: X.Org XInput Driver
[1119864.131] ABI class: X.Org XInput driver, version 21.0
[1119864.131] (II) Using input driver 'evdev' for 'Power Button'
[1119864.131] (**) Power Button: always reports core events
[1119864.131] (**) evdev: Power Button: Device: "/dev/input/event4"
[1119864.131] (--) evdev: Power Button: Vendor 0 Product 0x1
[1119864.131] (--) evdev: Power Button: Found keys
[1119864.131] (II) evdev: Power Button: Configuring as keyboard
[1119864.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[1119864.131] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[1119864.131] (**) Option "xkb_rules" "evdev"
[1119864.131] (**) Option "xkb_model" "pc104"
[1119864.131] (**) Option "xkb_layout" "us"
[1119864.164] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[1119864.164] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1119864.164] (II) Using input driver 'evdev' for 'Power Button'
[1119864.164] (**) Power Button: always reports core events
[1119864.164] (**) evdev: Power Button: Device: "/dev/input/event3"
[1119864.165] (--) evdev: Power Button: Vendor 0 Product 0x1
[1119864.165] (--) evdev: Power Button: Found keys
[1119864.165] (II) evdev: Power Button: Configuring as keyboard
[1119864.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[1119864.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[1119864.165] (**) Option "xkb_rules" "evdev"
[1119864.165] (**) Option "xkb_model" "pc104"
[1119864.165] (**) Option "xkb_layout" "us"
[1119864.165] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[1119864.166] (II) No input driver specified, ignoring this device.
[1119864.166] (II) This device may have been added with another device file.
[1119864.166] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[1119864.166] (II) No input driver specified, ignoring this device.
[1119864.166] (II) This device may have been added with another device file.
[1119864.167] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event0)
[1119864.167] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
[1119864.167] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard'
[1119864.167] (**) Dell Dell USB Keyboard: always reports core events
[1119864.167] (**) evdev: Dell Dell USB Keyboard: Device: "/dev/input/event0"
[1119864.167] (--) evdev: Dell Dell USB Keyboard: Vendor 0x413c Product 0x2105
[1119864.167] (--) evdev: Dell Dell USB Keyboard: Found keys
[1119864.167] (II) evdev: Dell Dell USB Keyboard: Configuring as keyboard
[1119864.167] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.1/1-6.1:1.0/0003:413C:2105.0001/input/input2/event0"
[1119864.167] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD, id 8)
[1119864.167] (**) Option "xkb_rules" "evdev"
[1119864.167] (**) Option "xkb_model" "pc104"
[1119864.167] (**) Option "xkb_layout" "us"
[1119864.167] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/event1)
[1119864.167] (**) PixArt DynexWired USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[1119864.167] (II) Using input driver 'evdev' for 'PixArt DynexWired USB Optical Mouse'
[1119864.167] (**) PixArt DynexWired USB Optical Mouse: always reports core events
[1119864.167] (**) evdev: PixArt DynexWired USB Optical Mouse: Device: "/dev/input/event1"
[1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Vendor 0x19ff Product 0x238
[1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found 3 mouse buttons
[1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found scroll wheel(s)
[1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found relative axes
[1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found x and y relative axes
[1119864.221] (II) evdev: PixArt DynexWired USB Optical Mouse: Configuring as mouse
[1119864.221] (II) evdev: PixArt DynexWired USB Optical Mouse: Adding scrollwheel support
[1119864.221] (**) evdev: PixArt DynexWired USB Optical Mouse: YAxisMapping: buttons 4 and 5
[1119864.221] (**) evdev: PixArt DynexWired USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1119864.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.2/1-6.2:1.0/0003:19FF:0238.0002/input/input3/event1"
[1119864.221] (II) XINPUT: Adding extended input device "PixArt DynexWired USB Optical Mouse" (type: MOUSE, id 9)
[1119864.222] (II) evdev: PixArt DynexWired USB Optical Mouse: initialized for relative axes.
[1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) keeping acceleration scheme 1
[1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration profile 0
[1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration factor: 2.000
[1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration threshold: 4
[1119864.223] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/mouse0)
[1119864.223] (II) No input driver specified, ignoring this device.
[1119864.223] (II) This device may have been added with another device file.
[1119864.224] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7)
[1119864.224] (II) No input driver specified, ignoring this device.
[1119864.224] (II) This device may have been added with another device file.
[1119864.224] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
[1119864.224] (II) No input driver specified, ignoring this device.
[1119864.224] (II) This device may have been added with another device file.
[1119864.225] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
[1119864.225] (II) No input driver specified, ignoring this device.
[1119864.225] (II) This device may have been added with another device file.
[1119864.225] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event10)
[1119864.225] (II) No input driver specified, ignoring this device.
[1119864.225] (II) This device may have been added with another device file.
[1119864.226] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event11)
[1119864.226] (II) No input driver specified, ignoring this device.
[1119864.226] (II) This device may have been added with another device file.
[1119864.226] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[1119864.226] (II) No input driver specified, ignoring this device.
[1119864.226] (II) This device may have been added with another device file.
[1119864.227] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event13)
[1119864.227] (II) No input driver specified, ignoring this device.
[1119864.227] (II) This device may have been added with another device file.
[1119864.228] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event14)
[1119864.228] (II) No input driver specified, ignoring this device.
[1119864.228] (II) This device may have been added with another device file.
[1119864.228] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[1119864.228] (II) No input driver specified, ignoring this device.
[1119864.228] (II) This device may have been added with another device file.
And here's the output of Xorg.log.old:
[1119721.111]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[1119721.111] X Protocol Version 11, Revision 0
[1119721.111] Build Operating System: Linux 3.19.2-1-ARCH x86_64
[1119721.111] Current Operating System: Linux ArtisanBox 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
[1119721.111] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1441102d-dc98-4815-b6eb-a21f7b3802ad rw quiet
[1119721.111] Build Date: 14 April 2015 10:34:18AM
[1119721.111]
[1119721.111] Current version of pixman: 0.32.6
[1119721.111] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1119721.111] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1119721.111] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 24 18:54:50 2015
[1119721.168] (==) Using config file: "/etc/X11/xorg.conf"
[1119721.168] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[1119721.169] (==) No Layout section. Using the first Screen section.
[1119721.169] (==) No screen section available. Using defaults.
[1119721.169] (**) |-->Screen "Default Screen Section" (0)
[1119721.169] (**) | |-->Monitor "<default monitor>"
[1119721.169] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[1119721.169] (==) Automatically adding devices
[1119721.169] (==) Automatically enabling devices
[1119721.169] (==) Automatically adding GPU devices
[1119721.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[1119721.169] Entry deleted from font path.
[1119721.169] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[1119721.169] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[1119721.169] Entry deleted from font path.
[1119721.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[1119721.169] Entry deleted from font path.
[1119721.169] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[1119721.170] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[1119721.170] Entry deleted from font path.
[1119721.170] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[1119721.170] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[1119721.170] (==) ModulePath set to "/usr/lib/xorg/modules"
[1119721.170] (**) Extension "Composite" is enabled
[1119721.170] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[1119721.170] (II) Loader magic: 0x815d80
[1119721.170] (II) Module ABI versions:
[1119721.170] X.Org ANSI C Emulation: 0.4
[1119721.170] X.Org Video Driver: 19.0
[1119721.170] X.Org XInput driver : 21.0
[1119721.170] X.Org Server Extension : 9.0
[1119721.182] (EE) systemd-logind: failed to get session: PID 21370 does not belong to any known session
[1119721.183] (II) xfree86: Adding drm device (/dev/dri/card0)
[1119721.183] (II) xfree86: Adding drm device (/dev/dri/card1)
[1119721.186] (--) PCI: (0:1:5:0) 1002:9616:1043:8388 rev 0, Mem @ 0xc0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000c000/256
[1119721.186] (--) PCI:*(0:2:0:0) 1002:954f:1682:2920 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[1119721.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[1119721.187] (II) LoadModule: "glx"
[1119721.363] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1119721.366] (II) Module glx: vendor="X.Org Foundation"
[1119721.366] compiled for 1.17.1, module version = 1.0.0
[1119721.366] ABI class: X.Org Server Extension, version 9.0
[1119721.366] (==) AIGLX enabled
[1119721.366] (==) Matched ati as autoconfigured driver 0
[1119721.366] (==) Matched ati as autoconfigured driver 1
[1119721.366] (==) Matched ati as autoconfigured driver 2
[1119721.366] (==) Matched modesetting as autoconfigured driver 3
[1119721.366] (==) Matched fbdev as autoconfigured driver 4
[1119721.367] (==) Matched vesa as autoconfigured driver 5
[1119721.367] (==) Assigned the driver to the xf86ConfigLayout
[1119721.367] (II) LoadModule: "ati"
[1119721.423] (WW) Warning, couldn't open module ati
[1119721.423] (II) UnloadModule: "ati"
[1119721.423] (II) Unloading ati
[1119721.423] (EE) Failed to load module "ati" (module does not exist, 0)
[1119721.423] (II) LoadModule: "modesetting"
[1119721.423] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[1119721.423] (II) Module modesetting: vendor="X.Org Foundation"
[1119721.423] compiled for 1.17.1, module version = 1.17.1
[1119721.423] Module class: X.Org Video Driver
[1119721.423] ABI class: X.Org Video Driver, version 19.0
[1119721.423] (II) LoadModule: "fbdev"
[1119721.424] (WW) Warning, couldn't open module fbdev
[1119721.424] (II) UnloadModule: "fbdev"
[1119721.424] (II) Unloading fbdev
[1119721.424] (EE) Failed to load module "fbdev" (module does not exist, 0)
[1119721.424] (II) LoadModule: "vesa"
[1119721.424] (WW) Warning, couldn't open module vesa
[1119721.424] (II) UnloadModule: "vesa"
[1119721.424] (II) Unloading vesa
[1119721.424] (EE) Failed to load module "vesa" (module does not exist, 0)
[1119721.424] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[1119721.424] (++) using VT number 1
[1119721.425] (II) modeset(0): using drv /dev/dri/card1
[1119721.425] (II) modeset(G0): using drv /dev/dri/card0
[1119721.425] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[1119721.425] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[1119721.425] (==) modeset(0): RGB weight 888
[1119721.425] (==) modeset(0): Default visual is TrueColor
[1119721.425] (II) Loading sub module "glamoregl"
[1119721.425] (II) LoadModule: "glamoregl"
[1119721.425] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[1119721.436] (II) Module glamoregl: vendor="X.Org Foundation"
[1119721.436] compiled for 1.17.1, module version = 1.0.0
[1119721.436] ABI class: X.Org ANSI C Emulation, version 0.4
[1119721.436] (II) glamor: OpenGL accelerated X.org driver based.
[1119721.472] (II) glamor: EGL version 1.4 (DRI2):
[1119721.473] (II) modeset(0): glamor initialized
[1119721.473] (II) Loading sub module "dri2"
[1119721.473] (II) LoadModule: "dri2"
[1119721.473] (II) Module "dri2" already built-in
[1119721.495] (II) modeset(0): Output VGA-1 has no monitor section
[1119721.515] (II) modeset(0): Output DIN-0 has no monitor section
[1119721.549] (II) modeset(0): Output DVI-0 has no monitor section
[1119721.568] (II) modeset(0): EDID for output VGA-1
[1119721.588] (II) modeset(0): EDID for output DIN-0
[1119721.623] (II) modeset(0): EDID for output DVI-0
[1119721.623] (II) modeset(0): Manufacturer: GSM Model: 5819 Serial#: 28153
[1119721.623] (II) modeset(0): Year: 2011 Week: 3
[1119721.623] (II) modeset(0): EDID Version: 1.3
[1119721.623] (II) modeset(0): Digital Display Input
[1119721.623] (II) modeset(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[1119721.623] (II) modeset(0): Gamma: 2.20
[1119721.623] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[1119721.623] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[1119721.623] (II) modeset(0): First detailed timing is preferred mode
[1119721.623] (II) modeset(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
[1119721.623] (II) modeset(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
[1119721.623] (II) modeset(0): Supported established timings:
[1119721.623] (II) modeset(0): 720x400@70Hz
[1119721.623] (II) modeset(0): 640x480@60Hz
[1119721.623] (II) modeset(0): 640x480@75Hz
[1119721.623] (II) modeset(0): 800x600@60Hz
[1119721.623] (II) modeset(0): 800x600@75Hz
[1119721.623] (II) modeset(0): 1024x768@60Hz
[1119721.623] (II) modeset(0): 1024x768@75Hz
[1119721.623] (II) modeset(0): 1280x1024@75Hz
[1119721.623] (II) modeset(0): Manufacturer's mask: 0
[1119721.623] (II) modeset(0): Supported standard timings:
[1119721.623] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[1119721.623] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[1119721.623] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[1119721.623] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[1119721.623] (II) modeset(0): Supported detailed timing:
[1119721.623] (II) modeset(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[1119721.623] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[1119721.623] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[1119721.623] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[1119721.623] (II) modeset(0): Monitor name: E2241
[1119721.623] (II) modeset(0): Serial No: 103TPHG0U153
[1119721.623] (II) modeset(0): EDID (in hex):
[1119721.623] (II) modeset(0): 00ffffffffffff001e6d1958f96d0000
[1119721.623] (II) modeset(0): 0315010380301b78ea9535a159579f27
[1119721.623] (II) modeset(0): 0e5054a54b00714f8180818fb3000101
[1119721.623] (II) modeset(0): 010101010101023a801871382d40582c
[1119721.623] (II) modeset(0): 4500dd0c1100001e000000fd00384b1e
[1119721.623] (II) modeset(0): 530f000a202020202020000000fc0045
[1119721.623] (II) modeset(0): 323234310a20202020202020000000ff
[1119721.623] (II) modeset(0): 003130335450484730553135330a00d5
[1119721.624] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[1119721.624] (II) modeset(0): Printing probed modes for output DVI-0
[1119721.624] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[1119721.624] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[1119721.624] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[1119721.624] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[1119721.624] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[1119721.624] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[1119721.624] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[1119721.624] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[1119721.624] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[1119721.624] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[1119721.624] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[1119721.624] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[1119721.624] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[1119721.624] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[1119721.624] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[1119721.624] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[1119721.624] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[1119721.624] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[1119721.624] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[1119721.624] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[1119721.624] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[1119721.624] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[1119721.624] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[1119721.624] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[1119721.624] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[1119721.624] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[1119721.624] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[1119721.624] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[1119721.624] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[1119721.624] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[1119721.624] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[1119721.624] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[1119721.624] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[1119721.624] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[1119721.624] (II) modeset(0): Output VGA-1 disconnected
[1119721.624] (II) modeset(0): Output DIN-0 disconnected
[1119721.624] (II) modeset(0): Output DVI-0 connected
[1119721.624] (II) modeset(0): Using exact sizes for initial modes
[1119721.624] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
[1119721.624] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[1119721.624] (==) modeset(0): DPI set to (96, 96)
[1119721.624] (II) Loading sub module "fb"
[1119721.624] (II) LoadModule: "fb"
[1119721.624] (II) Loading /usr/lib/xorg/modules/libfb.so
[1119721.624] (II) Module fb: vendor="X.Org Foundation"
[1119721.624] compiled for 1.17.1, module version = 1.0.0
[1119721.624] ABI class: X.Org ANSI C Emulation, version 0.4
[1119721.625] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[1119721.625] (==) modeset(G0): RGB weight 888
[1119721.625] (==) modeset(G0): Default visual is TrueColor
[1119721.625] (II) Loading sub module "glamoregl"
[1119721.625] (II) LoadModule: "glamoregl"
[1119721.625] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[1119721.625] (II) Module glamoregl: vendor="X.Org Foundation"
[1119721.625] compiled for 1.17.1, module version = 1.0.0
[1119721.625] ABI class: X.Org ANSI C Emulation, version 0.4
[1119721.625] (II) glamor: OpenGL accelerated X.org driver based.
[1119721.626] (II) glamor: EGL version 1.4 (DRI2):
[1119721.627] (II) modeset(G0): glamor initialized
[1119721.627] (II) Loading sub module "dri2"
[1119721.627] (II) LoadModule: "dri2"
[1119721.627] (II) Module "dri2" already built-in
[1119721.648] (II) modeset(G0): Output VGA-1-0 has no monitor section
[1119721.650] (II) modeset(G0): Output DVI-1-0 has no monitor section
[1119721.671] (II) modeset(G0): EDID for output VGA-1-0
[1119721.673] (II) modeset(G0): EDID for output DVI-1-0
[1119721.674] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[1119721.674] (==) modeset(G0): DPI set to (96, 96)
[1119721.674] (II) Loading sub module "fb"
[1119721.674] (II) LoadModule: "fb"
[1119721.674] (II) Loading /usr/lib/xorg/modules/libfb.so
[1119721.674] (II) Module fb: vendor="X.Org Foundation"
[1119721.674] compiled for 1.17.1, module version = 1.0.0
[1119721.674] ABI class: X.Org ANSI C Emulation, version 0.4
[1119721.674] (==) Depth 24 pixmap format is 32 bpp
[1119721.730] (==) modeset(G0): Backing store enabled
[1119721.730] (==) modeset(G0): Silken mouse enabled
[1119721.730] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[1119721.730] (==) modeset(G0): DPMS enabled
[1119721.730] (II) modeset(G0): [DRI2] Setup complete
[1119721.730] (II) modeset(G0): [DRI2] DRI driver: r600
[1119721.730] (II) modeset(G0): [DRI2] VDPAU driver: r600
[1119721.777] (==) modeset(0): Backing store enabled
[1119721.777] (==) modeset(0): Silken mouse enabled
[1119721.777] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[1119721.778] (==) modeset(0): DPMS enabled
[1119721.778] (II) modeset(0): [DRI2] Setup complete
[1119721.778] (II) modeset(0): [DRI2] DRI driver: r600
[1119721.778] (II) modeset(0): [DRI2] VDPAU driver: r600
[1119721.778] (--) RandR disabled
[1119721.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[1119721.785] (II) AIGLX: enabled GLX_ARB_create_context
[1119721.785] (II) AIGLX: enabled GLX_ARB_create_context_profile
[1119721.785] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[1119721.785] (II) AIGLX: enabled GLX_INTEL_swap_event
[1119721.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[1119721.785] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[1119721.785] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[1119721.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[1119721.785] (II) AIGLX: Loaded and initialized r600
[1119721.785] (II) GLX: Initialized DRI2 GL provider for screen 0
[1119721.789] (II) modeset(G0): Damage tracking initialized
[1119721.792] (II) modeset(0): Setting screen physical size to 508 x 285
[1119721.842] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[1119721.843] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1119721.843] (II) LoadModule: "evdev"
[1119721.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[1119721.843] (II) Module evdev: vendor="X.Org Foundation"
[1119721.843] compiled for 1.17.1, module version = 2.9.2
[1119721.843] Module class: X.Org XInput Driver
[1119721.843] ABI class: X.Org XInput driver, version 21.0
[1119721.843] (II) Using input driver 'evdev' for 'Power Button'
[1119721.843] (**) Power Button: always reports core events
[1119721.843] (**) evdev: Power Button: Device: "/dev/input/event4"
[1119721.843] (--) evdev: Power Button: Vendor 0 Product 0x1
[1119721.843] (--) evdev: Power Button: Found keys
[1119721.843] (II) evdev: Power Button: Configuring as keyboard
[1119721.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[1119721.843] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[1119721.843] (**) Option "xkb_rules" "evdev"
[1119721.844] (**) Option "xkb_model" "pc104"
[1119721.844] (**) Option "xkb_layout" "us"
[1119721.872] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[1119721.872] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1119721.872] (II) Using input driver 'evdev' for 'Power Button'
[1119721.872] (**) Power Button: always reports core events
[1119721.873] (**) evdev: Power Button: Device: "/dev/input/event3"
[1119721.873] (--) evdev: Power Button: Vendor 0 Product 0x1
[1119721.873] (--) evdev: Power Button: Found keys
[1119721.873] (II) evdev: Power Button: Configuring as keyboard
[1119721.873] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[1119721.873] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[1119721.873] (**) Option "xkb_rules" "evdev"
[1119721.873] (**) Option "xkb_model" "pc104"
[1119721.873] (**) Option "xkb_layout" "us"
[1119721.874] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[1119721.875] (II) No input driver specified, ignoring this device.
[1119721.875] (II) This device may have been added with another device file.
[1119721.876] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[1119721.876] (II) No input driver specified, ignoring this device.
[1119721.876] (II) This device may have been added with another device file.
[1119721.876] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event0)
[1119721.877] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
[1119721.877] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard'
[1119721.877] (**) Dell Dell USB Keyboard: always reports core events
[1119721.877] (**) evdev: Dell Dell USB Keyboard: Device: "/dev/input/event0"
[1119721.877] (--) evdev: Dell Dell USB Keyboard: Vendor 0x413c Product 0x2105
[1119721.877] (--) evdev: Dell Dell USB Keyboard: Found keys
[1119721.877] (II) evdev: Dell Dell USB Keyboard: Configuring as keyboard
[1119721.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.1/1-6.1:1.0/0003:413C:2105.0001/input/input2/event0"
[1119721.877] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD, id 8)
[1119721.877] (**) Option "xkb_rules" "evdev"
[1119721.877] (**) Option "xkb_model" "pc104"
[1119721.877] (**) Option "xkb_layout" "us"
[1119721.878] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/event1)
[1119721.878] (**) PixArt DynexWired USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[1119721.878] (II) Using input driver 'evdev' for 'PixArt DynexWired USB Optical Mouse'
[1119721.878] (**) PixArt DynexWired USB Optical Mouse: always reports core events
[1119721.878] (**) evdev: PixArt DynexWired USB Optical Mouse: Device: "/dev/input/event1"
[1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Vendor 0x19ff Product 0x238
[1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found 3 mouse buttons
[1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found scroll wheel(s)
[1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found relative axes
[1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found x and y relative axes
[1119721.931] (II) evdev: PixArt DynexWired USB Optical Mouse: Configuring as mouse
[1119721.931] (II) evdev: PixArt DynexWired USB Optical Mouse: Adding scrollwheel support
[1119721.931] (**) evdev: PixArt DynexWired USB Optical Mouse: YAxisMapping: buttons 4 and 5
[1119721.931] (**) evdev: PixArt DynexWired USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1119721.931] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.2/1-6.2:1.0/0003:19FF:0238.0002/input/input3/event1"
[1119721.931] (II) XINPUT: Adding extended input device "PixArt DynexWired USB Optical Mouse" (type: MOUSE, id 9)
[1119721.932] (II) evdev: PixArt DynexWired USB Optical Mouse: initialized for relative axes.
[1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) keeping acceleration scheme 1
[1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration profile 0
[1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration factor: 2.000
[1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration threshold: 4
[1119721.933] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/mouse0)
[1119721.933] (II) No input driver specified, ignoring this device.
[1119721.933] (II) This device may have been added with another device file.
[1119721.934] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7)
[1119721.934] (II) No input driver specified, ignoring this device.
[1119721.934] (II) This device may have been added with another device file.
[1119721.934] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
[1119721.934] (II) No input driver specified, ignoring this device.
[1119721.934] (II) This device may have been added with another device file.
[1119721.935] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
[1119721.935] (II) No input driver specified, ignoring this device.
[1119721.935] (II) This device may have been added with another device file.
[1119721.935] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event10)
[1119721.935] (II) No input driver specified, ignoring this device.
[1119721.935] (II) This device may have been added with another device file.
[1119721.936] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event11)
[1119721.936] (II) No input driver specified, ignoring this device.
[1119721.936] (II) This device may have been added with another device file.
[1119721.937] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[1119721.937] (II) No input driver specified, ignoring this device.
[1119721.937] (II) This device may have been added with another device file.
[1119721.937] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event13)
[1119721.937] (II) No input driver specified, ignoring this device.
[1119721.937] (II) This device may have been added with another device file.
[1119721.938] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event14)
[1119721.938] (II) No input driver specified, ignoring this device.
[1119721.938] (II) This device may have been added with another device file.
[1119721.938] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[1119721.938] (II) No input driver specified, ignoring this device.
[1119721.938] (II) This device may have been added with another device file.
[1119863.413] (EE)
[1119863.414] (EE) Backtrace:
[1119863.414] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x594a29]
[1119863.415] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fe8e391b53f]
[1119863.415] (EE) 2: /usr/lib/xorg/modules/libfb.so (fbBltOne+0x508) [0x7fe8d8a75968]
[1119863.416] (EE) 3: /usr/lib/xorg/modules/libfb.so (fbPutXYImage+0x23f) [0x7fe8d8a7983f]
[1119863.416] (EE) 4: /usr/lib/xorg/modules/libfb.so (fbPutImage+0xf2) [0x7fe8d8a79b52]
[1119863.417] (EE) 5: /usr/lib/xorg/modules/libglamoregl.so (glamor_glyphs_nf+0x6fd) [0x7fe8de3f435d]
[1119863.417] (EE) 6: /usr/lib/xorg-server/Xorg (DamageRegionAppend+0x34c3) [0x51f863]
[1119863.417] (EE) 7: /usr/lib/xorg-server/Xorg (SendGraphicsExpose+0xead) [0x43636d]
[1119863.417] (EE) 8: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x2f7) [0x438a97]
[1119863.418] (EE) 9: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x41b) [0x43cbcb]
[1119863.419] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fe8e3908800]
[1119863.419] (EE) 11: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[1119863.420] (EE) 12: ? (?+0x29) [0x29]
[1119863.420] (EE)
[1119863.420] (EE) Segmentation fault at address 0x0
[1119863.420] (EE)
Fatal server error:
[1119863.420] (EE) Caught signal 11 (Segmentation fault). Server aborting
[1119863.420] (EE)
[1119863.420] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[1119863.420] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[1119863.420] (EE)
[1119863.421] (II) AIGLX: Suspending AIGLX clients for VT switch
[1119863.427] (EE) Server terminated with error (1). Closing log file.
I'd appreciate any help I can get on this matter as Emacs is a vital program for me (I use it as a Lisp IDE)
Last edited by Slothel (2015-04-25 07:30:16)
Anyone available to help? The related thread posted offers a work-around solution which is to blacklist radeon, but since I have an AMD graphics card and am using the xf86-video-ati driver, wouldn't this completely break Xorg? I can't use the catalyst driver either, as support for my video card has been discontinued.
Still a pressing issue for me, and I wouldn't bother you all here if I could find the solution online, but I've been unable to do so. Most similiar issues that I have unearthed have not been solved. If it's any help, I've also noticed one program that crashes Xorg in the same random way that Emacs does, which is LibreOffice. I'm going to try logging in as root to see if that helps the issue but I suspect that it won't. Again, any help would be appreciated, just let me know if I can provide any other information.
Similar Messages
-
For some reason, why I try to edit a certain part of a plot in labplot, attempting to open a dialog window crashes xorg. This i the error in the log.
Backtrace:
0: X(xf86SigHandler+0x88) [0x80ba6d8]
1: [0xffffe420]
Fatal server error:
Caught signal 11. Server aborting
I go to a black screen and the keyboard/mouse lock up. I'm able to shut down because the power button isn't used by X. I tried removing labplot and the config file/s, but no luck. Any ideas?
Edit- the --nocrashhandler option results in no problems...Anyone available to help? The related thread posted offers a work-around solution which is to blacklist radeon, but since I have an AMD graphics card and am using the xf86-video-ati driver, wouldn't this completely break Xorg? I can't use the catalyst driver either, as support for my video card has been discontinued.
Still a pressing issue for me, and I wouldn't bother you all here if I could find the solution online, but I've been unable to do so. Most similiar issues that I have unearthed have not been solved. If it's any help, I've also noticed one program that crashes Xorg in the same random way that Emacs does, which is LibreOffice. I'm going to try logging in as root to see if that helps the issue but I suspect that it won't. Again, any help would be appreciated, just let me know if I can provide any other information. -
Hi, since the update today I'm experiencing strange emacs crashes...
I'm afraid the log is not very informative...
Fatal error 11: Segmentation fault
Backtrace:
emacs[0x503093]
emacs[0x4e9aae]
emacs[0x501eae]
emacs[0x501f13]
/usr/lib/libpthread.so.0(+0x10740)[0x7f1f9cf86740]
emacs[0x4a8a9a]
emacs[0x4ad9e4]
emacs[0x441e6f]
emacs[0x45f3fb]
emacs[0x4634f3]
emacs[0x55a26b]
emacs[0x430cce]
emacs[0x4516ea]
emacs[0x4f4551]
emacs[0x4f5ccf]
emacs[0x4f7a40]
emacs[0x55a147]
emacs[0x4e9f4e]
emacs[0x55a02b]
emacs[0x4ee567]
emacs[0x4ee880]
emacs[0x418119]
/usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f1f9cbf3800]
emacs[0x418bce]
[1] 18795 segmentation fault (core dumped) emacs --debug-init
Maybe a better debug log: http://pastie.org/10101800
Is there anyone having also these problems?
NOTE: I closed the issue and mark it as "solved" since it seems to be OK since the update to emacs 24.5...
Last edited by rogorido (2015-04-22 08:06:00)Alad wrote:If you don't mind use [Solved] or similar instead of [closed]. Closed is what appears next to the title if a moderator actually closes the topic.
I wouldn't mind, but it is not really solved. Today it happened again... I'm analyzing whether some (emacs) package I installed could be the reason for these crashes... -
For some days I opened this issue (https://bbs.archlinux.org/viewtopic.php?id=195913) which I closed myself, because I thougt it was solved. But it isn't. I'm experiencing emacs crashes. I think (but I am not sure) this began with the last big update of gtk3.
I compiled emacs with debug options and got now this backtrace (http://pastie.org/10111821). Can anyone interpret this? Or should I ask the emacs people?
I can not manage to reproduce exactly the crash, but it always happens when I save a buffer in a console in which I open a emacsclient with emacsclient -nw...
Many thanks in advance!mauritiusdadd wrote:
rogorido wrote:What is the best way to compile emacs with all debug info enabled?
Take a look at the wiki, it is described quite well https://wiki.archlinux.org/index.php/De … ing_Traces.
Yes, it is described quite well, but I dont get really useful debug traces with emacs... -
Hi!
I've done a full system upgrade, and xorg and emacs were upgraded to their latest version in the package repository. When I tried to start emacs afterwards, X crashed. I've edited my .emacs as the crash was apparently caused by the fact that I use "monotype-courier new" as my default font. Has anyone encountered a similer crash? I have no idea why this happens..
Thanks!I have this crash with the CVS version as well. I'll look into the xorg.conf file, but I don't believe this has changed.
I can select the monotype courier-new font in xfontsel by the way, so I guess that already rules out the possibility of a missing font path?
Regards, and thanks for the answer! -
[SOLVED] Xinerama crashing xorg 1.9
After installing the latest xorg packages (1.9) I can no longer use xinerama when I have two monitors connected.
I've tried this with several WMs, and none of them want to start with xinerama activa and an external monitor on VGA from my laptop.
I'm using the latest nvidia binary drivers (not beta) and both monitros work if I disable xinerama, and I can run xinerama if I do not have anything connected to the VGA out.
Anyone else noticed this and know what to do about it?
Last edited by grine (2010-10-01 14:13:52)/etc/X11/xorg.conf.d/10-monitor.conf
This and evdev are the only ones I've modified, evdev I just added the menu key on the keyboard as a compose button.
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Monitor"
Identifier "Monitor1"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Option "NoLogo" "True"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Option "NoLogo" "True"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" LeftOf "Screen0" #Screen1 at the left of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Xorg.1.log (Xorg.0.log is for X without Xinerama)
[ 12428.460]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 12428.460] X Protocol Version 11, Revision 0
[ 12428.461] Build Operating System: Linux 2.6.34-ARCH i686
[ 12428.461] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010 i686
[ 12428.461] Kernel command line: root=/dev/disk/by-uuid/295976ce-2dec-40c7-a8ae-499184c1b9ef resume=/dev/disk/by-uuid/d9b14b1c-8246-4468-b8e7-06e1628119c7 ro
[ 12428.461] Build Date: 24 August 2010 01:42:08PM
[ 12428.461]
[ 12428.461] Current version of pixman: 0.18.4
[ 12428.461] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12428.461] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12428.461] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Sep 30 11:39:51 2010
[ 12428.461] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12428.461] (==) ServerLayout "DualSreen"
[ 12428.461] (**) |-->Screen "Screen0" (0)
[ 12428.461] (**) | |-->Monitor "Monitor0"
[ 12428.461] (**) | |-->Device "Device0"
[ 12428.461] (**) |-->Screen "Screen1" (1)
[ 12428.461] (**) | |-->Monitor "Monitor1"
[ 12428.461] (**) | |-->Device "Device1"
[ 12428.461] (**) Option "Xinerama" "1"
[ 12428.461] (==) Automatically adding devices
[ 12428.461] (==) Automatically enabling devices
[ 12428.461] (**) Xinerama: enabled
[ 12428.462] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 12428.462] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12428.462] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12428.462] (II) Loader magic: 0x81f3200
[ 12428.462] (II) Module ABI versions:
[ 12428.462] X.Org ANSI C Emulation: 0.4
[ 12428.462] X.Org Video Driver: 8.0
[ 12428.462] X.Org XInput driver : 11.0
[ 12428.462] X.Org Server Extension : 4.0
[ 12428.463] (--) PCI:*(0:1:0:0) 10de:0427:1028:0227 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 12428.464] (II) Open ACPI successful (/var/run/acpid.socket)
[ 12428.464] (II) LoadModule: "extmod"
[ 12428.464] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 12428.464] (II) Module extmod: vendor="X.Org Foundation"
[ 12428.464] compiled for 1.9.0, module version = 1.0.0
[ 12428.464] Module class: X.Org Server Extension
[ 12428.464] ABI class: X.Org Server Extension, version 4.0
[ 12428.464] (II) Loading extension MIT-SCREEN-SAVER
[ 12428.464] (II) Loading extension XFree86-VidModeExtension
[ 12428.464] (II) Loading extension XFree86-DGA
[ 12428.464] (II) Loading extension DPMS
[ 12428.464] (II) Loading extension XVideo
[ 12428.464] (II) Loading extension XVideo-MotionCompensation
[ 12428.464] (II) Loading extension X-Resource
[ 12428.464] (II) LoadModule: "dbe"
[ 12428.464] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 12428.464] (II) Module dbe: vendor="X.Org Foundation"
[ 12428.465] compiled for 1.9.0, module version = 1.0.0
[ 12428.465] Module class: X.Org Server Extension
[ 12428.465] ABI class: X.Org Server Extension, version 4.0
[ 12428.465] (II) Loading extension DOUBLE-BUFFER
[ 12428.465] (II) LoadModule: "glx"
[ 12428.465] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12428.498] (II) Module glx: vendor="NVIDIA Corporation"
[ 12428.498] compiled for 4.0.2, module version = 1.0.0
[ 12428.498] Module class: X.Org Server Extension
[ 12428.498] (II) NVIDIA GLX Module 256.53 Fri Aug 27 21:28:41 PDT 2010
[ 12428.498] (II) Loading extension GLX
[ 12428.498] (II) LoadModule: "record"
[ 12428.499] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12428.499] (II) Module record: vendor="X.Org Foundation"
[ 12428.499] compiled for 1.9.0, module version = 1.13.0
[ 12428.499] Module class: X.Org Server Extension
[ 12428.499] ABI class: X.Org Server Extension, version 4.0
[ 12428.499] (II) Loading extension RECORD
[ 12428.499] (II) LoadModule: "dri"
[ 12428.499] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12428.499] (II) Module dri: vendor="X.Org Foundation"
[ 12428.499] compiled for 1.9.0, module version = 1.0.0
[ 12428.499] ABI class: X.Org Server Extension, version 4.0
[ 12428.499] (II) Loading extension XFree86-DRI
[ 12428.499] (II) LoadModule: "dri2"
[ 12428.499] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12428.499] (II) Module dri2: vendor="X.Org Foundation"
[ 12428.499] compiled for 1.9.0, module version = 1.2.0
[ 12428.499] ABI class: X.Org Server Extension, version 4.0
[ 12428.499] (II) Loading extension DRI2
[ 12428.499] (II) LoadModule: "nvidia"
[ 12428.499] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12428.500] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12428.500] compiled for 4.0.2, module version = 1.0.0
[ 12428.500] Module class: X.Org Video Driver
[ 12428.500] (II) NVIDIA dlloader X Driver 256.53 Fri Aug 27 21:05:55 PDT 2010
[ 12428.500] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12428.500] (++) using VT number 8
[ 12428.505] (II) Loading sub module "fb"
[ 12428.505] (II) LoadModule: "fb"
[ 12428.505] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12428.505] (II) Module fb: vendor="X.Org Foundation"
[ 12428.505] compiled for 1.9.0, module version = 1.0.0
[ 12428.505] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12428.505] (II) Loading sub module "wfb"
[ 12428.505] (II) LoadModule: "wfb"
[ 12428.505] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 12428.505] (II) Module wfb: vendor="X.Org Foundation"
[ 12428.505] compiled for 1.9.0, module version = 1.0.0
[ 12428.505] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12428.506] (II) Loading sub module "ramdac"
[ 12428.506] (II) LoadModule: "ramdac"
[ 12428.506] (II) Module "ramdac" already built-in
[ 12428.506] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12428.506] (==) NVIDIA(0): RGB weight 888
[ 12428.506] (==) NVIDIA(0): Default visual is TrueColor
[ 12428.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12428.506] (**) NVIDIA(0): Option "NoLogo" "True"
[ 12428.506] (**) NVIDIA(0): Enabling RENDER acceleration
[ 12428.506] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 12428.506] (II) NVIDIA(0): enabled.
[ 12428.629] (II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
[ 12428.629] (--) NVIDIA(0): Memory: 262144 kBytes
[ 12428.629] (--) NVIDIA(0): VideoBIOS: 60.86.45.00.12
[ 12428.630] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 12428.630] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 12428.630] (--) NVIDIA(0): Connected display device(s) on GeForce 8400M GS at PCI:1:0:0:
[ 12428.630] (--) NVIDIA(0): LG Electronics W2261 (CRT-0)
[ 12428.630] (--) NVIDIA(0): AUO (DFP-0)
[ 12428.630] (--) NVIDIA(0): LG Electronics W2261 (CRT-0): 400.0 MHz maximum pixel clock
[ 12428.630] (--) NVIDIA(0): AUO (DFP-0): 330.0 MHz maximum pixel clock
[ 12428.630] (--) NVIDIA(0): AUO (DFP-0): Internal Dual Link LVDS
[ 12428.699] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 12428.699] (==) NVIDIA(0):
[ 12428.699] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 12428.699] (==) NVIDIA(0): will be used as the requested mode.
[ 12428.699] (==) NVIDIA(0):
[ 12428.699] (II) NVIDIA(0): Validated modes:
[ 12428.699] (II) NVIDIA(0): "nvidia-auto-select"
[ 12428.699] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 12429.724] (++) NVIDIA(0): DPI set to (96, 96); computed from -dpi X commandline option
[ 12429.724] (WW) NVIDIA(0): 32-bit ARGB GLX visuals are not currently supported with the
[ 12429.724] (WW) NVIDIA(0): Xinerama extension.
[ 12429.724] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[ 12429.724] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 12429.724] (==) NVIDIA(1): RGB weight 888
[ 12429.724] (==) NVIDIA(1): Default visual is TrueColor
[ 12429.724] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 12429.724] (**) NVIDIA(1): Option "NoLogo" "True"
[ 12429.724] (**) NVIDIA(1): Enabling RENDER acceleration
[ 12429.724] (II) NVIDIA(1): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
[ 12429.724] (--) NVIDIA(1): Memory: 262144 kBytes
[ 12429.724] (--) NVIDIA(1): VideoBIOS: 60.86.45.00.12
[ 12429.724] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 12429.724] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 12429.724] (--) NVIDIA(1): Connected display device(s) on GeForce 8400M GS at PCI:1:0:0:
[ 12429.724] (--) NVIDIA(1): LG Electronics W2261 (CRT-0)
[ 12429.724] (--) NVIDIA(1): AUO (DFP-0)
[ 12429.724] (--) NVIDIA(1): LG Electronics W2261 (CRT-0): 400.0 MHz maximum pixel clock
[ 12429.724] (--) NVIDIA(1): AUO (DFP-0): 330.0 MHz maximum pixel clock
[ 12429.724] (--) NVIDIA(1): AUO (DFP-0): Internal Dual Link LVDS
[ 12429.810] (II) NVIDIA(1): Assigned Display Device: CRT-0
[ 12429.810] (==) NVIDIA(1):
[ 12429.810] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 12429.810] (==) NVIDIA(1): will be used as the requested mode.
[ 12429.810] (==) NVIDIA(1):
[ 12429.810] (II) NVIDIA(1): Validated modes:
[ 12429.810] (II) NVIDIA(1): "nvidia-auto-select"
[ 12429.810] (II) NVIDIA(1): Virtual screen size determined to be 1920 x 1080
[ 12429.820] (++) NVIDIA(1): DPI set to (96, 96); computed from -dpi X commandline option
[ 12429.820] (WW) NVIDIA(1): 32-bit ARGB GLX visuals are not currently supported with the
[ 12429.820] (WW) NVIDIA(1): Xinerama extension.
[ 12429.820] (WW) NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
[ 12429.820] (--) Depth 24 pixmap format is 32 bpp
[ 12429.821] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 12429.822] (II) NVIDIA(0): Initialized GPU GART.
[ 12429.834] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 12430.110] (II) Loading extension NV-GLX
[ 12430.150] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 12430.178] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 12430.178] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 12430.178] (==) NVIDIA(0): Backing store disabled
[ 12430.178] (==) NVIDIA(0): Silken mouse enabled
[ 12430.188] (==) NVIDIA(0): DPMS enabled
[ 12430.188] (II) Loading extension NV-CONTROL
[ 12430.188] (II) Loading sub module "dri2"
[ 12430.188] (II) LoadModule: "dri2"
[ 12430.188] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12430.188] (II) NVIDIA(0): [DRI2] Setup complete
[ 12430.188] (==) RandR enabled
[ 12430.190] (II) NVIDIA(1): Initialized GPU GART.
[ 12430.197] (II) NVIDIA(1): Setting mode "nvidia-auto-select"
[ 12430.266] (II) NVIDIA(1): Initialized OpenGL Acceleration
[ 12430.280] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 12430.280] (II) NVIDIA(1): Initialized X Rendering Acceleration
[ 12430.280] (==) NVIDIA(1): Backing store disabled
[ 12430.280] (==) NVIDIA(1): Silken mouse enabled
[ 12430.288] (==) NVIDIA(1): DPMS enabled
[ 12430.288] (II) Loading sub module "dri2"
[ 12430.288] (II) LoadModule: "dri2"
[ 12430.288] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12430.289] (II) NVIDIA(1): [DRI2] Setup complete
[ 12430.289] (==) RandR enabled
[ 12430.289] (II) Initializing built-in extension Generic Event Extension
[ 12430.289] (II) Initializing built-in extension SHAPE
[ 12430.289] (II) Initializing built-in extension MIT-SHM
[ 12430.289] (II) Initializing built-in extension XInputExtension
[ 12430.289] (II) Initializing built-in extension XTEST
[ 12430.289] (II) Initializing built-in extension BIG-REQUESTS
[ 12430.289] (II) Initializing built-in extension SYNC
[ 12430.289] (II) Initializing built-in extension XKEYBOARD
[ 12430.289] (II) Initializing built-in extension XC-MISC
[ 12430.289] (II) Initializing built-in extension SECURITY
[ 12430.289] (II) Initializing built-in extension XINERAMA
[ 12430.289] (II) Initializing built-in extension XFIXES
[ 12430.289] (II) Initializing built-in extension RENDER
[ 12430.289] (II) Initializing built-in extension RANDR
[ 12430.289] (II) Initializing built-in extension COMPOSITE
[ 12430.289] (II) Initializing built-in extension DAMAGE
[ 12430.292] (II) Initializing extension GLX
[ 12430.842] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 12430.843] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12430.843] (II) LoadModule: "evdev"
[ 12430.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12430.843] (II) Module evdev: vendor="X.Org Foundation"
[ 12430.843] compiled for 1.9.0, module version = 2.5.0
[ 12430.843] Module class: X.Org XInput Driver
[ 12430.843] ABI class: X.Org XInput driver, version 11.0
[ 12430.843] (**) Video Bus: always reports core events
[ 12430.843] (**) Video Bus: Device: "/dev/input/event6"
[ 12430.853] (--) Video Bus: Found keys
[ 12430.853] (II) Video Bus: Configuring as keyboard
[ 12430.853] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 12430.853] (**) Option "xkb_rules" "evdev"
[ 12430.853] (**) Option "xkb_model" "evdev"
[ 12430.853] (**) Option "xkb_layout" "se"
[ 12430.853] (**) Option "xkb_options" "compose:menu"
[ 12430.893] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 12430.893] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12430.893] (**) Power Button: always reports core events
[ 12430.893] (**) Power Button: Device: "/dev/input/event4"
[ 12430.909] (--) Power Button: Found keys
[ 12430.909] (II) Power Button: Configuring as keyboard
[ 12430.909] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 12430.909] (**) Option "xkb_rules" "evdev"
[ 12430.909] (**) Option "xkb_model" "evdev"
[ 12430.909] (**) Option "xkb_layout" "se"
[ 12430.909] (**) Option "xkb_options" "compose:menu"
[ 12430.910] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 12430.910] (II) No input driver/identifier specified (ignoring)
[ 12430.910] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 12430.910] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12430.910] (**) Sleep Button: always reports core events
[ 12430.910] (**) Sleep Button: Device: "/dev/input/event5"
[ 12430.919] (--) Sleep Button: Found keys
[ 12430.919] (II) Sleep Button: Configuring as keyboard
[ 12430.919] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 12430.919] (**) Option "xkb_rules" "evdev"
[ 12430.919] (**) Option "xkb_model" "evdev"
[ 12430.919] (**) Option "xkb_layout" "se"
[ 12430.919] (**) Option "xkb_options" "compose:menu"
[ 12430.921] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event13)
[ 12430.921] (**) Broadcom Corp: Applying InputClass "evdev keyboard catchall"
[ 12430.921] (**) Broadcom Corp: always reports core events
[ 12430.921] (**) Broadcom Corp: Device: "/dev/input/event13"
[ 12430.932] (--) Broadcom Corp: Found keys
[ 12430.933] (II) Broadcom Corp: Configuring as keyboard
[ 12430.933] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD)
[ 12430.933] (**) Option "xkb_rules" "evdev"
[ 12430.933] (**) Option "xkb_model" "evdev"
[ 12430.933] (**) Option "xkb_layout" "se"
[ 12430.933] (**) Option "xkb_options" "compose:menu"
[ 12430.933] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event14)
[ 12430.933] (**) Broadcom Corp: Applying InputClass "evdev pointer catchall"
[ 12430.933] (**) Broadcom Corp: always reports core events
[ 12430.933] (**) Broadcom Corp: Device: "/dev/input/event14"
[ 12430.946] (--) Broadcom Corp: Found 3 mouse buttons
[ 12430.946] (--) Broadcom Corp: Found relative axes
[ 12430.946] (--) Broadcom Corp: Found x and y relative axes
[ 12430.946] (II) Broadcom Corp: Configuring as mouse
[ 12430.946] (**) Broadcom Corp: YAxisMapping: buttons 4 and 5
[ 12430.946] (**) Broadcom Corp: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12430.946] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE)
[ 12430.946] (**) Broadcom Corp: (accel) keeping acceleration scheme 1
[ 12430.946] (**) Broadcom Corp: (accel) acceleration profile 0
[ 12430.946] (**) Broadcom Corp: (accel) acceleration factor: 2.000
[ 12430.946] (**) Broadcom Corp: (accel) acceleration threshold: 4
[ 12430.946] (II) Broadcom Corp: initialized for relative axes.
[ 12430.947] (II) config/udev: Adding input device Broadcom Corp (/dev/input/mouse2)
[ 12430.947] (II) No input driver/identifier specified (ignoring)
[ 12430.947] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 12430.947] (II) No input driver/identifier specified (ignoring)
[ 12430.948] (II) config/udev: Adding input device HDA Intel Mic at Ext Front Jack (/dev/input/event10)
[ 12430.948] (II) No input driver/identifier specified (ignoring)
[ 12430.948] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event11)
[ 12430.948] (II) No input driver/identifier specified (ignoring)
[ 12430.948] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event12)
[ 12430.948] (II) No input driver/identifier specified (ignoring)
[ 12430.950] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event15)
[ 12430.950] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 12430.950] (**) Logitech USB Laser Mouse: always reports core events
[ 12430.950] (**) Logitech USB Laser Mouse: Device: "/dev/input/event15"
[ 12430.959] (--) Logitech USB Laser Mouse: Found 12 mouse buttons
[ 12430.959] (--) Logitech USB Laser Mouse: Found scroll wheel(s)
[ 12430.959] (--) Logitech USB Laser Mouse: Found relative axes
[ 12430.959] (--) Logitech USB Laser Mouse: Found x and y relative axes
[ 12430.959] (II) Logitech USB Laser Mouse: Configuring as mouse
[ 12430.959] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 12430.959] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12430.959] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE)
[ 12430.959] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 12430.959] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 12430.959] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 12430.959] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 12430.959] (II) Logitech USB Laser Mouse: initialized for relative axes.
[ 12430.960] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse3)
[ 12430.960] (II) No input driver/identifier specified (ignoring)
[ 12430.960] (II) config/udev: Adding input device LITEON Technology USB Multimedia Keyboard (/dev/input/event16)
[ 12430.960] (**) LITEON Technology USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 12430.960] (**) LITEON Technology USB Multimedia Keyboard: always reports core events
[ 12430.960] (**) LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event16"
[ 12430.973] (--) LITEON Technology USB Multimedia Keyboard: Found keys
[ 12430.973] (II) LITEON Technology USB Multimedia Keyboard: Configuring as keyboard
[ 12430.973] (II) XINPUT: Adding extended input device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD)
[ 12430.973] (**) Option "xkb_rules" "evdev"
[ 12430.973] (**) Option "xkb_model" "evdev"
[ 12430.973] (**) Option "xkb_layout" "se"
[ 12430.973] (**) Option "xkb_options" "compose:menu"
[ 12430.976] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 12430.976] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12430.976] (**) AT Translated Set 2 keyboard: always reports core events
[ 12430.976] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 12430.986] (--) AT Translated Set 2 keyboard: Found keys
[ 12430.986] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 12430.986] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 12430.986] (**) Option "xkb_rules" "evdev"
[ 12430.986] (**) Option "xkb_model" "evdev"
[ 12430.986] (**) Option "xkb_layout" "se"
[ 12430.986] (**) Option "xkb_options" "compose:menu"
[ 12430.986] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event7)
[ 12430.987] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 12430.987] (**) PS/2 Mouse: always reports core events
[ 12430.987] (**) PS/2 Mouse: Device: "/dev/input/event7"
[ 12430.999] (--) PS/2 Mouse: Found 3 mouse buttons
[ 12430.999] (--) PS/2 Mouse: Found relative axes
[ 12430.999] (--) PS/2 Mouse: Found x and y relative axes
[ 12430.999] (II) PS/2 Mouse: Configuring as mouse
[ 12430.999] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 12430.999] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12430.999] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 12430.999] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 12430.999] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 12430.999] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 12430.999] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 12430.999] (II) PS/2 Mouse: initialized for relative axes.
[ 12431.000] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 12431.000] (II) No input driver/identifier specified (ignoring)
[ 12431.000] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event8)
[ 12431.000] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 12431.000] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 12431.000] (II) LoadModule: "synaptics"
[ 12431.000] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 12431.000] (II) Module synaptics: vendor="X.Org Foundation"
[ 12431.000] compiled for 1.9.0, module version = 1.3.0
[ 12431.000] Module class: X.Org XInput Driver
[ 12431.000] ABI class: X.Org XInput driver, version 11.0
[ 12431.000] (II) Synaptics touchpad driver version 1.3.0
[ 12431.000] (**) Option "Device" "/dev/input/event8"
[ 12431.042] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 12431.042] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 12431.042] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 12431.042] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right scroll-buttons
[ 12431.042] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 12431.042] (**) Option "TapButton1" "1"
[ 12431.042] (**) Option "TapButton2" "2"
[ 12431.042] (**) Option "TapButton3" "3"
[ 12431.068] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 12431.068] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 12431.082] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 12431.082] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 12431.082] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 12431.082] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 12431.082] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 12431.082] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 12431.082] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 12431.082] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 12431.112] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 12431.113] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 12431.113] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 12431.113] (II) Synaptics touchpad driver version 1.3.0
[ 12432.003] (EE) AlpsPS/2 ALPS GlidePoint no synaptics event device found
[ 12432.003] (**) Option "Device" "/dev/input/mouse1"
[ 12432.018] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
[ 12432.018] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
[ 12432.018] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
[ 12432.018] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 12432.018] (**) Option "TapButton1" "1"
[ 12432.018] (**) Option "TapButton2" "2"
[ 12432.018] (**) Option "TapButton3" "3"
[ 12432.039] (EE) Query no Synaptics: 6003C8
[ 12432.039] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 12432.039] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[ 12432.056] (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
[ 12432.056] (II) UnloadModule: "synaptics"
[ 12432.056] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 12432.056] (II) No input driver/identifier specified (ignoring)
[ 12432.057] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event2)
[ 12432.057] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 12432.057] (**) Dell WMI hotkeys: always reports core events
[ 12432.057] (**) Dell WMI hotkeys: Device: "/dev/input/event2"
[ 12432.069] (--) Dell WMI hotkeys: Found keys
[ 12432.069] (II) Dell WMI hotkeys: Configuring as keyboard
[ 12432.069] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[ 12432.069] (**) Option "xkb_rules" "evdev"
[ 12432.069] (**) Option "xkb_model" "evdev"
[ 12432.069] (**) Option "xkb_layout" "se"
[ 12432.069] (**) Option "xkb_options" "compose:menu"
[ 12451.674]
Backtrace:
[ 12451.674] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80e685b]
[ 12451.674] 1: /usr/bin/X (0x8048000+0x64895) [0x80ac895]
[ 12451.674] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb787940c]
[ 12451.674] 3: /usr/bin/X (0x8048000+0x23e57) [0x806be57]
[ 12451.674] 4: /usr/bin/X (0x8048000+0x1a135) [0x8062135]
[ 12451.674] 5: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb75b6c76]
[ 12451.674] 6: /usr/bin/X (0x8048000+0x19d11) [0x8061d11]
[ 12451.674] Segmentation fault at address 0x4
[ 12451.674]
Fatal server error:
[ 12451.674] Caught signal 11 (Segmentation fault). Server aborting
[ 12451.674]
[ 12451.674]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 12451.674] Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 12451.674]
[ 12451.683] (II) Video Bus: Close
[ 12451.683] (II) UnloadModule: "evdev"
[ 12451.696] (II) Power Button: Close
[ 12451.696] (II) UnloadModule: "evdev"
[ 12451.712] (II) Sleep Button: Close
[ 12451.712] (II) UnloadModule: "evdev"
[ 12451.725] (II) Broadcom Corp: Close
[ 12451.725] (II) UnloadModule: "evdev"
[ 12451.748] (II) Broadcom Corp: Close
[ 12451.748] (II) UnloadModule: "evdev"
[ 12451.768] (II) Logitech USB Laser Mouse: Close
[ 12451.768] (II) UnloadModule: "evdev"
[ 12451.782] (II) LITEON Technology USB Multimedia Keyboard: Close
[ 12451.782] (II) UnloadModule: "evdev"
[ 12451.795] (II) AT Translated Set 2 keyboard: Close
[ 12451.795] (II) UnloadModule: "evdev"
[ 12451.815] (II) PS/2 Mouse: Close
[ 12451.815] (II) UnloadModule: "evdev"
[ 12451.855] (II) UnloadModule: "synaptics"
[ 12451.868] (II) Dell WMI hotkeys: Close
[ 12451.868] (II) UnloadModule: "evdev"
The WM loads and is fully usable for a short while (if it loads fast like Awesome, Xmonad/XFCE crashes before it becomes usable) before X segfaults. -
Hi all.
I have a Matrox Millennium II and every time i use mga (xf86-video-mga) on the Screen section of xorg.conf, the Xorg crashes. I have tried to use the xorg.conf generated by Xubuntu 7.10 (which runs great on that distro) on Arch, but no success.
Here's the xorg.conf (generated by Xubuntu):
# xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pt"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Matrox Graphics, Inc. MGA 2164W [Millennium II]"
Driver "mga"
BusID "PCI:1:7:0"
Option "OldDmaInit" "True"
EndSection
Section "Monitor"
Identifier "Monitor Genérico"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Matrox Graphics, Inc. MGA 2164W [Millennium II]"
Monitor "Monitor Genérico"
DefaultDepth 24
SubSection "Display"
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Here's the /var/log/Xorg.0.log (sorry, it's long):
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux localhost 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:21:33 UTC 2008 i686
Build Date: 03 February 2008 02:54:48PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 1 19:50:21 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor Genérico"
(**) | |-->Device "Matrox Graphics, Inc. MGA 2164W [Millennium II]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d65c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 4
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,02f4 card 10de,02f4 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,02fa card 10de,02fa rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,02fe card 10de,02fe rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,02f8 card 10de,02f8 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,02f9 card 10de,02f9 rev a2 class 05,00,00 hdr 00
(II) PCI: 00:00:5: chip 10de,02ff card 10de,02ff rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:6: chip 10de,027f card 10de,027f rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:7: chip 10de,027e card 10de,027e rev a2 class 05,00,00 hdr 80
(II) PCI: 00:08:0: chip 10de,0369 card 1043,cb84 rev a1 class 05,00,00 hdr 00
(II) PCI: 00:09:0: chip 10de,0360 card 1043,cb84 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:09:1: chip 10de,0368 card 1043,cb84 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:09:2: chip 10de,036a card 1043,cb84 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:0a:0: chip 10de,036c card 1043,cb84 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:0a:1: chip 10de,036d card 1043,cb84 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:0c:0: chip 10de,036e card 1043,cb84 rev a1 class 01,01,8a hdr 00
(II) PCI: 00:0d:0: chip 10de,037f card 1043,cb84 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:0d:1: chip 10de,037f card 1043,cb84 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:0d:2: chip 10de,037f card 1043,cb84 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:0e:0: chip 10de,0370 card 0000,0000 rev a2 class 06,04,01 hdr 81
(II) PCI: 00:0e:1: chip 10de,0371 card 1043,81f6 rev a2 class 04,03,00 hdr 80
(II) PCI: 00:10:0: chip 10de,0373 card 1043,cb84 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:11:0: chip 10de,0373 card 1043,cb84 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:16:0: chip 10de,0375 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:07:0: chip 102b,051b card 102b,0100 rev 00 class 03,00,00 hdr 00
(II) PCI: 01:0b:0: chip 104c,8023 card 1043,815b rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:00:0: chip 1095,3132 card 1043,819f rev 01 class 01,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:9:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x0a0c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc800000 - 0xfd7fffff (0x1000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:22:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(1:7:0) Matrox Graphics, Inc. MGA 2164W [Millennium II] rev 0, Mem @ 0xfb000000/24, 0xfd7f8000/14, 0xfc800000/23, BIOS @ 0xfd7e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfdff8000 - 0xfdffbfff (0x4000) MX[b]
[1] -1 0 0xfdfff000 - 0xfdfff07f (0x80) MX[b]
[2] -1 0 0xfd7f4000 - 0xfd7f7fff (0x4000) MX[b]
[3] -1 0 0xfd7ff000 - 0xfd7ff7ff (0x800) MX[b]
[4] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[b]
[5] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[b]
[6] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[b]
[7] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[b]
[8] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[b]
[9] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[10] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[b]
[11] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[12] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[13] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[14] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[b]
[15] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[16] -1 0 0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
[17] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[b](B)
[18] -1 0 0xfd7f8000 - 0xfd7fbfff (0x4000) MX[b](B)
[19] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[20] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[21] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[22] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[23] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[24] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[25] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[26] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[27] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
[28] -1 0 0x0000cc00 - 0x0000cc0f (0x10) IX[b]
[29] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[30] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[31] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[32] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[33] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[34] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[35] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[36] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[37] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[38] -1 0 0x0000f400 - 0x0000f40f (0x10) IX[b]
[39] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[40] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdff8000 - 0xfdffbfff (0x4000) MX[b]
[1] -1 0 0xfdfff000 - 0xfdfff07f (0x80) MX[b]
[2] -1 0 0xfd7f4000 - 0xfd7f7fff (0x4000) MX[b]
[3] -1 0 0xfd7ff000 - 0xfd7ff7ff (0x800) MX[b]
[4] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[b]
[5] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[b]
[6] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[b]
[7] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[b]
[8] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[b]
[9] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[10] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[b]
[11] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[12] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[13] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[14] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[b]
[15] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[16] -1 0 0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
[17] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[b](B)
[18] -1 0 0xfd7f8000 - 0xfd7fbfff (0x4000) MX[b](B)
[19] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[20] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[21] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[22] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[23] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[24] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[25] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[26] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[27] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
[28] -1 0 0x0000cc00 - 0x0000cc0f (0x10) IX[b]
[29] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[30] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[31] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[32] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[33] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[34] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[35] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[36] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[37] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[38] -1 0 0x0000f400 - 0x0000f40f (0x10) IX[b]
[39] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[40] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdff8000 - 0xfdffbfff (0x4000) MX[b]
[5] -1 0 0xfdfff000 - 0xfdfff07f (0x80) MX[b]
[6] -1 0 0xfd7f4000 - 0xfd7f7fff (0x4000) MX[b]
[7] -1 0 0xfd7ff000 - 0xfd7ff7ff (0x800) MX[b]
[8] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[b]
[9] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[b]
[10] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[b]
[11] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[b]
[12] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[b]
[13] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[14] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[b]
[15] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[16] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[17] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[18] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[b]
[19] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[20] -1 0 0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
[21] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[b](B)
[22] -1 0 0xfd7f8000 - 0xfd7fbfff (0x4000) MX[b](B)
[23] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[27] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[28] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[29] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[30] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[31] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[32] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[33] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
[34] -1 0 0x0000cc00 - 0x0000cc0f (0x10) IX[b]
[35] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[36] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[37] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[38] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[39] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[40] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[41] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[42] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[43] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[44] -1 0 0x0000f400 - 0x0000f40f (0x10) IX[b]
[45] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[46] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) NVIDIA GLX Module 169.09 Fri Jan 11 15:31:25 PST 2008
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.9.100
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag400, mgag550
(II) Primary Device is: PCI 01:07:0
(--) Chipset mga2164w found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdff8000 - 0xfdffbfff (0x4000) MX[b]
[5] -1 0 0xfdfff000 - 0xfdfff07f (0x80) MX[b]
[6] -1 0 0xfd7f4000 - 0xfd7f7fff (0x4000) MX[b]
[7] -1 0 0xfd7ff000 - 0xfd7ff7ff (0x800) MX[b]
[8] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[b]
[9] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[b]
[10] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[b]
[11] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[b]
[12] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[b]
[13] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[14] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[b]
[15] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[16] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[17] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[18] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[b]
[19] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[20] -1 0 0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
[21] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[b](B)
[22] -1 0 0xfd7f8000 - 0xfd7fbfff (0x4000) MX[b](B)
[23] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[26] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[27] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[28] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[29] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[30] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[31] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[32] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[33] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
[34] -1 0 0x0000cc00 - 0x0000cc0f (0x10) IX[b]
[35] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[36] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[37] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[38] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[39] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[40] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[41] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[42] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[43] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[44] -1 0 0x0000f400 - 0x0000f40f (0x10) IX[b]
[45] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[46] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdff8000 - 0xfdffbfff (0x4000) MX[b]
[5] -1 0 0xfdfff000 - 0xfdfff07f (0x80) MX[b]
[6] -1 0 0xfd7f4000 - 0xfd7f7fff (0x4000) MX[b]
[7] -1 0 0xfd7ff000 - 0xfd7ff7ff (0x800) MX[b]
[8] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[b]
[9] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[b]
[10] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[b]
[11] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[b]
[12] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[b]
[13] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[14] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[b]
[15] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[16] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[17] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[18] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[b]
[19] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[20] -1 0 0xfd000000 - 0xfd00ffff (0x10000) MX[b](B)
[21] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[b](B)
[22] -1 0 0xfd7f8000 - 0xfd7fbfff (0x4000) MX[b](B)
[23] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[29] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[30] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[31] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[32] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[34] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[35] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[36] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
[37] -1 0 0x0000cc00 - 0x0000cc0f (0x10) IX[b]
[38] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[39] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[40] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[41] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[42] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[43] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[44] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[45] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[46] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[47] -1 0 0x0000f400 - 0x0000f40f (0x10) IX[b]
[48] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[49] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[50] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[51] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(--) MGA(0): Chipset: "mga2164w"
(**) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(**) MGA(0): Option "OldDmaInit" "True"
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Linear framebuffer at 0xFB000000
(==) MGA(0): MMIO registers at 0xFD7F8000
(--) MGA(0): Pseudo-DMA transfer window at 0xFC800000
(--) MGA(0): BIOS at 0xFD7E0000
(II) Attempted to read BIOS 128KB from /sys/bus/pci/devices/0000:01:07.0/rom: got 32KB
(--) MGA(0): Video BIOS info block at offset 0x07DC0
(WW) MGA(0): Unable to probe memory amount due to hardware bug. Assuming 4096 KB
(--) MGA(0): VideoRAM: 4096 kByte
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): Output VGA using monitor section Monitor Genérico
(==) MGA(0): Write-combining range (0xfb000000,0x400000)
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): EDID vendor "SAM", prod id 4183
(II) MGA(0): Using EDID range info for horizontal sync
(II) MGA(0): Using EDID range info for vertical refresh
(II) MGA(0): Printing DDC gathered Modelines:
(II) MGA(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) MGA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) MGA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) MGA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) MGA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) MGA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) MGA(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) MGA(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
(II) MGA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(II) MGA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) MGA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) MGA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) MGA(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) MGA(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) MGA(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) MGA(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) MGA(0): EDID vendor "SAM", prod id 4183
(II) MGA(0): Output VGA connected
(II) MGA(0): Output VGA using initial mode 1024x768
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 250 MHz
(--) MGA(0): MCLK used is 50.0 MHz
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1280x1024 (pitch 0)
(**) MGA(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(**) MGA(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 84.9 Hz
(II) MGA(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(**) MGA(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) MGA(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(**) MGA(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) MGA(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) MGA(0): Driver mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 87.0 Hz (I)
(II) MGA(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(**) MGA(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) MGA(0): Driver mode "800x600": 56.8 MHz (scaled from 0.0 MHz), 53.7 kHz, 84.9 Hz
(II) MGA(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(**) MGA(0): Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(**) MGA(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) MGA(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) MGA(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MGA(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) MGA(0): Driver mode "640x480": 35.0 MHz (scaled from 0.0 MHz), 42.9 kHz, 84.6 Hz
(II) MGA(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(**) MGA(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) MGA(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(**) MGA(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) MGA(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) MGA(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) MGA(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) MGA(0): Driver mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 39.4 kHz, 87.8 Hz
(II) MGA(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
(**) MGA(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) MGA(0): Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
(II) MGA(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(**) MGA(0): Display dimensions: (320, 240) mm
(**) MGA(0): DPI set to (101, 108)
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80baf4e]
1: [0xb7fc0420]
2: /usr/bin/X(InitOutput+0xa10) [0x80a81a0]
3: /usr/bin/X(main+0x296) [0x8073d46]
4: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d8d390]
5: /usr/bin/X(FontFileCompleteXLFD+0x209) [0x80732b1]
Fatal server error:
Caught signal 8. Server aborting
The error that i get on the screen is:
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80baf4e]
1: [0xb7fc0420]
2: /usr/bin/X(InitOutput+0xa10) [0x80a81a0]
3: /usr/bin/X(main+0x296) [0x8073d46]
4: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d8d390]
5: /usr/bin/X(FontFileCompleteXLFD+0x209) [0x80732b1]
Fatal server error:
Caught signal 8. Server aborting
Please, can someone help me with this?
I'm now using the vesa driver, but that's not a good solution...
thanks in advance.
Last edited by eldarion (2008-03-03 22:54:05)@eldarion,
Have you had a look at the unofficial matrox drivers at:
http://forum.tuxx-home.at/viewtopic.php?t=153 ?
Don't know about your card, but this is the mga driver I am using with my Millennium G400 and G450 cards.
Now, the .run installer might complain about "different X server versions ... because ABI incompatible", so add the following to the [X-:*-Core] section in /opt/kde/share/config/kdm/kdmrc :
ServerArgsLocal=-ignoreABI
Also, set in the xorg.conf Device section:
Option "HWCursor" "false"
(In fact, you can just copy the files mga_drv.so and mga_hal_drv.so to /usr/lib/xorg/modules/drivers/ if necessary.)
glxinfo and glxgears should check out okay with this mga driver. -
Suspend resume failed - crashed xorg
Hello,
I've just installed Archlinux on Macbook Pro (9,2).
Everything is almost find but I have troubles with suspend/resume.
It should work out-of-box but it doesn't.
Resume from suspend doesn't work - there is always KDM login screen shown, because Xorg crash during resume.
From xorg log:
[ 591.393] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
From journalctl:
Oct 02 10:36:16 mek systemd[1491]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
There might be some connection with this problem: https://bbs.archlinux.org/viewtopic.php?id=170008 ?
Thanks for help!Hi,
there is one similarity with the linked problem and my problem. The error from journactl:
Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or direc
But it's true that root cause for the linked problem is something different. I just thought that there could be some hint or something...
About the workaround, you mean this script:
https://bbs.archlinux.org/viewtopic.php … 2#p1331782
Doesn't work for me unfortunately
Right now I'm searching and googling how to fix the error from journalctl. -
Emac Crashes With Any Application. Please Help?
Can anyone please help?
I have had an Emac computer for years now. I hardly ever use it, but it has a lot of my old video files and documents on it. I mainly work with my macbook pro. Until recently, my Emac has been working fine, but I tried to use it today and it seems to suddenly be fubar.
Here's what happened. I wanted to take an old (.mov) video file and transfer it to my macbook pro. I used an 8GB pen drive. The transfer to the pen drive seemed to take literally no time, but the video file also still seemed to play from the pen drive on the Emac, so I thought it was fine. Took it to the macbook pro. The video file wouldn't play, it was just a black screen for the duration of the video.
I decided to try and export another version on the Emac, in case that would help. I had a version I'd colour-corrected in Final Cut Express, so I opened that. The Emac then did what I have this evening learned is a "kernel panic". I didn't know what that was though, so I tried again and the same thing.
The original edit of the video had been done in iMovie, so I tried to open that next. It opened, but as soon as I tried to play the video, "kernel panic".
I tried again and no "kernel panic", but everything crashed and the entire system became unresponsive, so I had to restart.
I decided I would try to burn the .mov onto a CD and transfer it that way. During the burning process, the system crashed. When I restarted, the computer was unable to read anything on the disc.
I then went to do some online research. When I opened firefox, the system crashed.
Can anyone tell me what's going on and how I can start to go about getting things working again?
Any help would be appreciated.Sorry. Been under the weather with a flu bug that triggered some "loverly" asthma things! Good to see you back, although I had hoped it would be to say you had the old eMac all sorted and learning new tricks.
I'm rather at a standstill here. The fact that the capacitors you can see are not affected doesn't necessarily mean those that are elsewhere under the cover are also OK. There are reports that people have removed the logic board to find the hidden capacitors leaking even though the ones visible in the RAM door were fine
Because a PRAM battery tests at 3.6V in hand doesn't always mean it's producing that under load when installed. However, the eMacs are not so picky about PRAM battery power as older models, and there are a couple of easy things that get you around a dead/weak battery anyway:
1) Boot from a system CD/DVD, then immediately restart booting from the hard drive.
2) Boot while holding command + option + p + r and keep holding that combo until you hear a total of three startup chimes, then let go the keys and allow booting to continue.
The first method uses startup values from the optical disk and the second one resets the computer's PRAM back to factory defaults.
I keep coming back to your symptoms being the same as the eMac I worked with that WAS in the affected SN range. The computer would boot fine, but any app opened crashed within seconds.
. I feel like you need some cheap or free hands-on help with this--at least someone you can talk to on the phone in real time. Have you looked for a Mac User Group (MUG) near you? I know you live where the population density can put neighbors miles away and some cities light-years away, but a MUG is a good place to find a guru on older models. The other option would be to ask of the IT staff (the worker-bees, not the bosses) at a school of university that has used Macs. Some great resources there. Here's the find-a-MUG link: http://appleusergroupresources.com/find-a-group/ We just retired our last eMac. My wife has been using a 1.42G model almost exactly 7 years and, as she's more into social networking now to stay in touch with our adult children, and our tax software will no longer run on PowerPC. I talked her into a refurbed iMac 21.5-inch mid-2011 we got directly from Apple for under US$1000. Nice computer. -
I have an arch laptop on which emacs reliably crashes. More precisely, whenever I type C-x 5 0 to close a window, all windows close and then emacs gets into a tight loop burning CPU. This problem is driving me crazy. Stranger still, I have an arch desktop on which the problem does not occur.
The machines are configured almost identically, except that the laptop (which experiences the problem) has intel graphics, while the desktop uses nvidia. I've reproduced the problem with "emacs -q" (ruling out configuration files). The problem happens if I ssh from the laptop to itself and forward X11, but not if I ssh between the two machines in either direction.
I have run memtest86+ on the laptop. I have uninstalled and reinstalled emacs. I have reinstalled all of base. I have even run sha256sum on the emacs binaries and all shared libraries of "ldd emacs" on the two machines, and verified that everything is identical except for libGL (because of intel vs. nvidia). Finally, I re-installed all 869 packages on the laptop, to no avail.
I've tried to build the arch emacs package from source, so as to debug it, but the PKGBUILD in abs is broken on both of my machines. Upon linking temacs, I get errors of undefined references in image.o (mostly to graphicsmagick sounding functions from libGraphicsMagickWand).
Does anyone have any suggestions? For what it's worth, the problem machine is a Pentium core i7 M 620, while the working machine has a Xeon E5620 CPU. The working CPU has 4 flags the other one doesn't, namely pdpe1gb, pcid, dca, and epb, but these are all CPU features for the kernel, so shouldn't be resulting in a different instruction set.
Thanks.Okay, for anyone else who is getting frustrated by this, the workaround is to downgrade to the gtk2 toolkit from gtk3. I just edited the PKGBUILD file to change gtk3 to gtk2, and also disabled imagemagick (since that causes build errors). The working configure line is here:
./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib \
--localstatedir=/var --with-x-toolkit=gtk2 --with-xft --without-imagemagick
The problem must be caused by some weird i915 graphics driver error triggered by gtk3. -
Hello,
I just installed arch last night and managed to get my network up and running in less than 20 minutes! So far, I am loving it! The problem I have is: how do I go about installing emacs with x.org server? When I try installing emacs it requires xaw3d which by itself asks for xfree86 which apparently conflicts with xorg.
In general, how to install packages and 'ignore' certain dependancies? I realize the popular opinion is that it's bad, but, for example, I know I don't need xorg to run just plain console emacs.
I'm coming from the world of Slackware and I'm sort of used to no-dependancy-checking so...
A very nice forum BTW,follow this wiki
http://wiki.archlinux.org/index.php/Desktop%20Arch
good luck -
Hello,
for some weeks dropbox 3.0.5-1 from AUR crashes the whole Xorg session for me immediately when it is started. I've tried reinstalling, removing all ~/.dropbox* files, trying dropbox-experimental, running strace on dropbox etc. but * can not stop the crashing or figure out what the cause is. There is nothing helpful in journalctl or /var/log/Xorg.0.log, just messages from other programs that fails when Xorg dies.
How can even Xorg die from another application?, and how can I debug this finding the cause of the crashes?
Thanks,Uninstall dropbox via pacman. Then if Xorg works fine, try to use the non-installable dropbox Install Dropbox via command line.
There was (still is?) a problem with systemtray icon. -
G'day,
My 512/149Gb 1.25Ghz eMac purchased Aug-04 has recently started to crash badly (ie up to 3 times in 1 day), where by the entire system freezes up.
The only semi-common association with when the system is crashing is the use of Office X (v10.0.0), though it has happened when those apps (Word, Excel & PP) weren't running.
Other symptoms have been - trying to open Date/Time and it instead opens a folder... No responce when trying to open the System Prefs from the Apple menu...
Over the 18months since buying the computer I've gradually upgraded from 10.3.4. to 10.3.9 as the updates have come along. I've tried re-installing the 10.3.9 upgrade, but have continued to have problems. I've run programs like Janitor, Cocktail, Rember, but no luck.
What should I try next? Could this be more than software problems?
cheers
TravisActually, if the problem with this mid-2004 eMac is due to the bad capacitor problem that's been cropping up (see eMac freezes randomly, open window turns into broken up jibber), then you can contact AppleCare and/or Apple Customer Relations, or just directly contact an Apple Authorized Service Provider (AARP). An AARP can open the eMac and directly check for tell-tale bulging / leaking capacitors.
When you call AppleCare, if you're outside the initial 90-day free phone support (three years if you purchased the extended AppleCare warrenty), you'll be asked to provide a credit card number; the charge to that card is supposed to be waived if the problem turns out to be a hardware issue covered under warrenty. (If your warrenty has run out you can ask at the end of the call to have the charge waived anyway.) You'll need to describe the problem, plus the steps you've taken to try to troubleshoot the issue, mostly because the first-tier support people have to run through a script before you can ask to be escalated to a supervisor who can authorize out-of-warrenty service.
When you reach a supervisor, you want to describe the symptoms, the date your eMac was purchased, and mention the referenced Apple Discussions thread. Ask to have an AARP authorized to inspect the eMac and ask that if the capacitor problem is detected taht the logic board replacement be provided by Apple. You may be asked to pay for the AARP labor with the logic board replaced free; you may get the whole repair done free; you may get nothing --- it seems to depend n part on how persuavive you are talking to the AppleCare supervisor. If you're turned down by AppleCare, some have reported success going to Apple Customer Relations. As with any transaction, being firm but polite is key (way too many posters have written to denounce the service they recieved, when their own account of the interaction makes you wonder no one's figured a way to reach through the phone lines to strangle them for rudeness).
Before you do anything else, check there isn't a problem with the hard drive or the OS or with OS kernel extensions. Does the computer behave if you Start Up in Safe Mode? What's reported by Disk Utility> Repair Disk when you run it from the OS X Install disc's Installer menu, as described in Using Disk Utility and fsck? What's reported by Apple Hardware Test? Also go through the "applications quit unexpectedly" and related sections of Dr. Smoke's The X Lab: The X-FAQs.
You want to rule out any other explanations of your problems before concluding it's the bad capacitor freezing issue. Good luck. -
EMac Crashing Even After Clean Install
I've got an eMac that I bought late 2005. It's been working fine for seven months, but two weeks ago began having random crashes. The crashes seem to occur regardless of which applications are running or in the foreground. TechTool Pro finds no issues; neither does Disk Warrior. Performed OF resets. Tried different mouse and keyboard. Booted from factory disc and ran permissions, all repairs on startup volume. That didn't help. Neither did the Apple Hardware Test that came with the Mac. No errors or problems of any kind were found. Finally, I did a clean install of the OS, sure that would fix whatever was causing this. It did not. A crash occurred while copying some files from a local server. This bit appeared in that login account's console log:
June 29 08:21:59 copy9 kernel: ** ASIC Hang Log End **
June 29:08:22:05 copy9 kernel: ATIRadeon::submit_buffer: Overflowed block waiting for FIFO space. Have 5, need 6. RBBM_STATUS 0x8009c100. VAPCNTLSTATUS 0x00000002
Also, FWIW, if I boot from a G4 Apple Diagnostic CD, I get this message: "Invalid memory access at: %SRR0:00000000 %SRR1: 00083030.
Anybody have a clue about this? Do I have a RAM DIMM gone bad (even though test softare finds no problem with memory)? Problem with onboard video? Network? Am I missing something?
Thanks for any ideas...Okay, let me clarify. Sorry for not being clearer earlier. My computer had been freezing and crashing and just not working for me for quite some time BEFORE I did the erase and install. That's why I finally did an erase and install as a last resort. The thing is, erasing and installing didn't fix anything. I ran Repair Permissions both before and after resinstalling. I still can't do anything unless I start up in safe mode. I am beginning to wonder if it may be a simple matter of needing more memory? Here is my embarassing computer information:
I have an eMac, PowerPC G4; OS version 10.3.4.
CPU speed: 1.25 GHz
I assume my RAM is this DDR SDRAM?: 256MB
The only peripherals I have besides the keyboard and mouse are a hpdeskjet 960c printer and an iSight, but I have not had either of those hooked up when I have tried to boot up my computer since doing the erase and install and it is still crashing.
Hopefully this might be helpful in some way. I'm pretty lost here so you may be offering help to a lost cause and I'll just have to give in and take it somewhere, but thanx for taking the time to read my posts and try and point me in the right direction! -
[Solved] Firefox 7.0.1-1 crashing xorg 1.11.1-2
Hello,
Today I updated to the newest xorg package available in the pacman repos. Everything seems to be fine, I'm able to use intellij, and do most other things in gnome without problem. However, when I try to run firefox, X restarts and I'm left at my login screen.
whodevil>firefox
Xlib: extension "RANDR" missing on display ":0.0".
XIO: fatal IO error 2 (No such file or directory) on X server ":0.0"
after 30 requests (30 known processed) with 0 events remaining.
firefox: Fatal IO error 104 (Connection reset by peer) on X server :0.0.
When I look in /var/log/Xorg.0.log there doesn't appear to be anything suspicious other than each time xorg restarts it rolls the log. When I go into the Xorg.0.log.old, I don't see any messages related to xorg being shutdown.
However when I look in the kernel.log I see this:
Nov 7 13:59:42 localhost kernel: [ 165.690978] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Nov 7 13:59:42 localhost kernel: [ 166.110186] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Nov 7 14:01:21 localhost kernel: [ 265.047653] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Nov 7 14:01:21 localhost kernel: [ 265.466850] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Does anyone have any ideas? Is there other information I'm missign that would help me figure out the problem?
thanks,
whodevil
EDIT:
It turned out that I was doing it all backwards, here is what I have for my xorg.conf.d/10-radeon.conf
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
EndSection
Section "Monitor"
Identifier "DVI-0"
Option "Enable" "true"
Option "Primary" "True"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "Enable" "true"
# Option "RightOf" "Monitor0"
Option "Primary" "false"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "Enable" "true"
Option "monitor-DVI-0" "DVI-0"
Option "monitor-DVI-1" "DVI-1"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "DVI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
What I needed was to be running xrandr to do dual monitors with this command:
xrandr --auto --output DVI-1 --mode 1600x1200 --right-of DVI-0
Last edited by whodevil (2011-11-09 23:13:50)Here is what I have in my /etc/X11/xorg.conf.d/10-radeon.conf. This xorg conf was working fine, and still for the most part does work fine. The only app I've found that does not work is firefox. I'm pretty stumped.
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "ZaphodHeads" "DVI-0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "radeon"
Option "ZaphodHeads" "DVI-1"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
#Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
#Option "TwinView" "0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Also a look at which modules are loaded.
whodevil>lsmod|grep radeon
radeon 992259 2
ttm 54360 1 radeon
drm_kms_helper 25409 1 radeon
drm 183380 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 5199 1 radeon
i2c_core 20133 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
Maybe you are looking for
-
Spam email (gmail) disappeared as I clicked on it
So first off, I know, don't click on spam. I'm using Acompli on my iPhone 6. I saw a spam message (gmail account) and I click on it to then move it to the spam folder. Only when I clicked on it, it simply disappeared. It's not in spam, it's not in my
-
How do I get a data plan for iPad
How do I get a data plan for my ipad
-
IPhoto 11 will not open, I tried reloading my ILife but that did not work either. It says the certificate expired Mar 23, 2012
-
What is car play ? how can i use this?
what is car play ? how can i use this?
-
Thread safety in XMLParserv2 for java
Hello, I've just posted something about this on the forum, but I have a few more precise questions: 1/ If I instanciate a DOMParser in a singleton class, can I have multiple threads use this single instance to produce XMLDocument objects (e.g. by par