Email code do not appear in web page

I want to send email so I put the following test code in an index.cfm file:
<cfmail to="[email protected]" from="[email protected]" subject="Hello There">Hello!
Testing</cfmail>
cfmail
When I view the page source of the web page, I only see "cfmail".
I do not see "<cfmail to=... </cfmail>.
Please help.
Thanks.

Have you checked the underliverable mail directory and/or log files to see if any errors were encountered?
You may wish to review the "Sending and Receiving E-Mail" section of the CF documentation for information on troubleshooting mail problems.
http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -782a.html

Similar Messages

Flash video skin controls not appearing on web page

Hi
I have a puzzle. I have some test movie clips that are
operated (played) by pressing a thumbnail. All works ok in the
resultinmg html and flash file that is produced, but when I import
the flash movi into DW, the controls disappear, but the movie
plays...
if you look at the link below you can see the flash movie
controls in operation OK
http://www.chrisleslie.co.uk/new/flash/8movietest.html
but when the flash doc is inserted into the actual page the
controls disappear......
http://www.chrisleslie.co.uk/new/Film.htm
(press thumbnail 2 to play the test movie)
any ideas would be greatly received...im at a loss here and
heading for the vodka.......

hi,
I have a similar problem. I have an FLV which sits inside my flash movie. It works fine when previewing it within the flash viewer.
But when embedding the flash movie into a html page - the controls magically disappear!
Now i have tried copying the skin to EVERY SINGLE LOCATION WITHIN MY FOLDER STRUCTURE...but it still does not display.
Any more suggestions??

Banner does not appear in web preview

I have a banner image that I put at the top of my webpage it looks great in DW. However when I go to web preview in Firefox or IE it does not appear on the page in the browser, just the title bayshore. Can someone please let me know how to fix this.
Thank you

This is a strange way to show the site. Can't you just upload the page?
In addition, I tried running that piece of code through the validator and you do have issues with the HTML that could cause some display issues. I would recommend fixing those first to see if that helps:
Validator - http://validator.w3.org/unicorn/

My printer will not print the web pages using firefox...how do I set it up to print a web page?

I have an hp photosmart c4180 printer and it will not print the web pages in firefox...how exactly do I set up FF so I can print web pages? I will need step by step instruction also on exactly where to go to set it up.

Open System Preferences (gear icon on the dock), then open Print & Scan
Click the + button at the bottom of the printer list
If your printer appears....not all printers are supported....click on the name to highlight it
Click the Add button to install the printer at the AirPort Express location
Try to print. You must choose the correct printer at the AirPort Express location since the printer is "installed" at other locations on your network.
If you open Print & Scan again, and select the printer at the AirPort Express, there is an option to make the printer the "default" location, so you do not have to choose which location to select when you want to print.

Printer will not print most web pages.

Wireless Photosmart all in one Printer will not print most web pages. Everything elso prints consistantly but cannot determine why web pages generally do not print. It soes not seem to matter whether I click file - print or control P or clicking the print Icon. The print icon appears at the bottom of the screen for a couple of seconds then disappears & nothing prints. Is there a setting I am missing?

Hi. Go to this link http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&dlc=en&jumpid=reg_R1002_USEN&lc=... and download the PDU and run it.
Feel free to provide Kudos if I have helped you!

Safari not displaying some web pages properly why?

I have been finding of late that safari does not display certain web pages properly. i.e.: text overlaps other text and is not formatted properly. This seems to have become more common lately. Even Apple's own apple info page does not display properly. Could this be a setting in safari that I have messed up somehow?

Go step by step and test.
1. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click the “Details” button.
    Remove all cookies except from Apple, your internet service provider and banks.
2. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.
3. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
4. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
5. Temporarily turn off Safari iCloud sync and test.
     System Preferences > iCloud
     Uncheck the box beside “Safari” and test.

After 6 months can not access some web pages

I can not get several web pages to work when I pull them up. Like Comcast, the main page comes up but not the current TV listings.

Unfortunately this hasn't worked either. I did this several times, after deleting cache files and repairing permissions. Do you think the issue is something that the ISP could address?
Another issue has appeared: I'm unable to login to a site that a friend has constructed; he assures me that when he uses the same login information on his mac there's no access problem. When I try, the login fields just reappear, without what I've entered.
Any ideas are appreciated!

Firefox 4: the drop down menus in the top menu bar will not appear in Google pages.

''locking as a duplicate - https://support.mozilla.com/en-US/questions/808729''
Firefox 4: the drop down menus in the top menu bar will not appear in Google pages. For example, when I click "more" it is like clicking a dead link. Nothing happens. When I click the "tools" icon or my email address to log out, same thing.

Could you do the following please.
In the location bar at the top, type '''about:config''' and hit Enter
In the filter at the top, copy/paste the following setting:
'''browser.urlbar.maxRichResults'''
If the figure on the right is a single number, or a minus figure i.e. '''-1''', right click it, choose '''Modify''', remove the current setting and replace it with the figure "'''12'''".
Then close Firefox and restart it again.
I went to Google Maps, but as you can see from the screenshot, directions appear to be working.
You could also try creating a new Profile. See [[Managing profiles]]

I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked security settings. Can anyone offer a possible solution?

I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked proxies, cleared cache, checked security settings. I have tried disabling plugins and addons. Can anyone offer a possible solution? On Mac.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/Error+loading+web+sites

HT5312 i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me

i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me
<Email Edited by Host>

As these are public forums, you're not talking to iTunes Support, I've asked the hosts to remove your email address from your post - it's not a good idea to post it unless you like spam email.
The reset link will only show if you have a rescue email address on your account - a rescue email address is not the same as an alternate/secondary email address, they are different addresses/settings on an account.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

Can not open any web page in Safari

can not open any web page in Safari on the IPad. All other wireless features work fine.

If this does not work then try a reset ,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Tax code does not appear in any G/L account item Message FF753

Dear all,
During creating billing document, the system cannot post account document and display the follow error message:
FF753 Tax code does not appear in any G/L account item.
I tried to trace the program and found internal table t_bseg containing 3 entries:
1: Customer a/c: without tax code
2: GR clearing a/c: without tax code
3: Output tax a/c: contain tax code
Customer a/c and GR clearing a/c without tax code causes this error.
Anyone know how to solve it?
Thanks & B.Regards

Hi,
In FS00 for GR/IR A/c in Control data, in Tax Category choose all tax types allowed (*) and also tick posting without tax allowed and try again.
Regards,
Sadashivan

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fi network. I have reset the network settings and still Safari will not open any web pages. Help!

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!

Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Tax code is not appearing in PO

Hi All
I am using TAXINJ procedure.
while creating po for excise material and I clicked on tax code tab in item level in invoice then tax code is not in list but it maintain in ftxp and all conditions with gross price becomes greyout so that i can not enter gross price.
I check with j1id, it maintain correctly.taxcode also assign to country level.
Can anybody give me the solution,
1)why tax code is not appearing in tax tab in PO.and
2)why gross price condition is in display mode.
Thanks and Regards...
Trupti

> 1)why tax code is not appearing in tax tab in PO.and
If You have done all the Settings Properly then it will Show in Tax codes List. Please go to Tax code Field and Press F4 and in Next Window Click on display all Values icon and try
> 2)why gross price condition is in display mode.
Go to Gross Price Condition type in M/06 and Check Whether the Manual entries is Set to D Cannot Process Manually.
also Check whether Function Authorization is Assigned to User so that Prices Cannot be Manually Entered.

Email code do not appear in web page

Similar Messages

Maybe you are looking for