Email form - new field

Hi Gurus!
Is it possible and if so how to add new object/attribute or just new field in email form (t-code CRMD_EMAIL) ?
Regards
Piotr

Hi Piotr,
You must create a structure in SE11 t-code, and assign it to a new scenario (for example) in the path indicated by Dipesh.
Then, on your email form, choose the scenario you created for it. It will make available the fields that you add in your structure to your email form. Drag it to desired position in e-mail form.
Then, to fill those values, you are right. You must implement CRM_IM_ADD_DATA_BADI and method CRM_IM_BPSELE.
There, the fields that you dragged into your email form will became available at changing parameter ct_att_values.
All you have to do is to fill each line of that internal table by looping them, according your logic. Something like this:
      LOOP AT ct_att_values ASSIGNING <line>.
        CASE <line>-name.
          WHEN 'ZCRMST_EMAIL_FORMS-USER_ID.
            <line>-value = sy-uname.
          WHEN 'ZCRMST_EMAIL_FORMS-OTHER_FIELD.
            <line>-value = lv_other_field.
        ENDCASE.
      ENDLOOP.
Hope that this helps you going a little further.
Kind regards,

Similar Messages

Add new field to HR PCR forms

Hi All,
We are trying to enhance adobe form for scenario SRQ1.
We want to add some new fields to tha form.
For that we have copied the existing standard form to zform.
We have implemented the zinterface too.
To add new field on form we created as an import parameter in form interface.
We added to context of adobe form and on layout.
But we are not getting that field in 'special_data' table in BADI implementation of SRQ1.
Please let me know how and where we should write a code to add new field in 'special_data' table.
Thanks & Regards,
Nilesh.

Thanks Suresh,
We have added it to characteristics of SRQ1 scenario and it's working.
But now we are facing problem in adding data to additional_data table.
Can you tell us something about it.
Actually in set_additional_values method of BADI we are adding data to additional_data table but on form it is not reflecting.
Please advice.

I entered new fields in a form that was created last year to update it. However, now when I view the responses, they are listed as Column 1, Column 5, etc. It doesn't show a label for the actual field when I view the responses. Can you please help?

I entered new fields in a form that was created last year to update it. However, now when I view the responses, the headings are listed as Column 1, Column 5, etc. rather than the name of the heading. Can you please help?

Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

Adding a new field to an Automatic Row Processing form

Hi,
I have a form that I built through the form Wizard which has an automatic row processing function. It is working very well, except that any new fields I add to the form are not being updated in the database when the row is processed. I have set up the field exactly the same as other fields which are working and were originaly created by the wizard. I have deleted and recreated the row processing Page Process, but nothing seems to make it work. Have I missed anything? I don't want to recreate my page from scratch each time I want to add a new field.
Thanks,
Steve

if you're positive that your new fields/columns update correctly when you use Text Field items and not when you use Select List ones, i'd check to see what your select lists are returning. a good way to see exactly what your form got from your select list items is to check the session state for your select list items right after you submit your page (clicking the "Session" link in your developer toolbar in your runtime environment is a good way to get to this info). also, even though you said your added Text Fields work and your Select Lists don't, i'd still check the "Source Type" and "Source value or expression" fields of your select list items to make sure they're set correctly. for form items to work with your table in htmldb auto-dml processing, you need to set the "Source Type" to "Database Column" and the "Source value or expression" to the case-sensitive name of your db column.
hope this helps,
raj

How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
      document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

How can i transfer all my datas and email form old Mac G5 to new iMac ?

How can i transfer all my datas and email form old Mac G5 to new iMac ?

Generally Mugration Assistant will suffice importing all Data ito a new user, but you can manually import it...
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

Cannot update new field through SharePoint properties on re-pubished InfoPath form

Hello,
I would truly appreciate any help with this problem. I've searched the forum for answers to this issue, but none of the ones I've found seem to
apply.
We are using SharePoint 2007.
When I re-publish a form with a new field, I am unable to modify that new field through SharePoint properties on older forms. I have tried re-linking the old forms but that does not resolve the issue. I can re-create this problem consistently in new
and old InfoPath form libraries.
Here are the latest steps I have taken to re-create the error:
Created Form Library called Error Testing.
Created new form (from blank template) with three data fields in the data source: name, occupation and address.
Added section and all fields onto the form.
Published form to Error Testing library. All fields were promoted and selected the “Allow users to edit data in this field by using a datasheet or properties page” option.
Created and saved Form 1 in library with no issues.
Opened edit properties and was able to modify and save the content in all three fields.
Added a new field to the form template: City.
Published form to Error Testing library. The original fields, and the new field were promoted and selected the “Allow users to edit data in this field by using a datasheet or properties page”
option.
Created and saved Form 2 in library with no issues.
Opened edit properties in Form 2 and was able to modify and save the content in all three fields.
Opened edit properties in Form 1, modified all fields and got the following message when I tried to save:
"Changes could not be saved into the document. The property to change is read-only for the document's content type, or the document is missing XML elements or attributes where
the changes would be saved. Try editing the document in a Windows SharePoint Services-compatible XML editor such as MicroSoft Office InfoPath."
Modified each field one at a time and determined the field I could not edit and that was causing the error message was
the new City field.
I re-linked Form 1 and got same error message when I tried to modify the City field.
I opened Form 1 entered the city and saved.
The content of the city field appears in the SharePoint column and I am able to edit the content through the Edit Properties field.
This is an issue when we run a workflow that tries to update the new field on an old version of an InfoPath form.

You can certainly add the fields manually by using SharePoint Designer, but a more effective way to Open the form template in "Design Mode" Click "Tools" and then "Form Options" Choose "Versioning".
InfoPath defaults to not Upgrade forms automatically. If different versions are not a historical issue for this solution, then Change the default to "Automatically Upgrade Old Forms". Then republish form... The Next time you open a from in
the library with this content type it will upgrade the old forms in the library.
Have a look at this post on the same topic:
http://social.msdn.microsoft.com/Forums/en-US/cffd3fa0-0a53-4ef2-8c62-0764cbe9f0e2/adding-new-fields-to-existing-infopath-form-template?forum=sharepointcustomizationlegacy

I have a fillable form that's already been made. I need to edit fields by moving them and I need to add new fields. How do I do that?

I have a form that was made by someone else. I need to move fields and add new fields in the same box. How do I do that?

If the form was created in Acrobat and you have Acrobat, you should be able to edit the fields by selecting: Tools > Forms > Edit
This is for Acrobat 11. If the PDF has security restrictions that prevent editing or was created with LiveCycle Designer, you won't be able to edit it in Acrobat. If security was applied, you'll need to know the password in order to remove it to allow editing.

Adding new field in PE51 Form

hi experts,
I want to print a new field in PE51 Form.
i added a new line in the form.
but when i selected the single field radiobutton and in change mode double click at the position where i wanted to print a new value it is giving error ie dialog box -
No data has been set up at this fixed position.
so are ther any attributes to set for the new line added for data to be printed?
Please reply me how to do this as soon as possible.
Thanks & regds,
imran

Dear Imran,
Double click will work only after assigning the source value for the field instead first you should create the value to fetch the data for the field.
Good Luck.
Om.

Creating a new field in a standard form using Forms Personalization

Gurus,
Has anyone done this? If so, could you please provide steps involved or point me to a good tutorial
I need to add user name to a standard transaction-based form. I want to make sure this can be done through personalization.
Thanks,
Scott
P.S. I give points for helpful or correct answers
Edited by: sreese on Oct 17, 2011 1:24 PM

Pl post details of OS, database and EBS versions.
I do not believe you can add new fields to seeded forms using forms personalization.
MOS Doc 420518.1 - Limitations of Forms Personalization
BTW, points are meaningless :-)
HTH
Srini

Add new field into Standard Adobe Form

Hi Expert,
I'm trying to do a very simple thing (at least that is what i think), we want to have new scenario for PCR (personnel change request). So i copy the standard interface and form (ISR_FORM_SPEG) and add some new field in that form (trough Tcode SFP). The problem is the new field that i added is not showing up any value, i tried to add address or personnel area to the form. What do i miss here? I'm relatively new to this adobe form. Thanks
Regards
Hendri

Hi,
Because I'm new at this i will assume that this problem is just as a matter of binding problem. I've copy the form and interface ISR_form_SPEG to Z.
In interface(TCode SFP) Z_ISR_IF_SPEG there is enty in import like this
position | Type | QISR_TAB_type| | |
In the Z_ISR_FORM_SPEG i drag the interface Position (from import folder) into the context on the right side of screen, in Layout tab i create ISR Text Display, and drag the position into the text display (which i believe is the binding processes). Activate it and save. But no value is displayed when running the iview on the portal (personnel change request), the form show and all label are show too but the value is not showing. Thanks

Can I create an email form that includes a field for uploading and image?

I'd like to create an email form in Muse that allows people to submit the usual text but also allows them to browse for and upload an image that would be emailed (attached or inline) to me along with the text.
Does anyone know if there's a way to do that directly in Muse?
Thanks.

Which form?
Many of the forms are created with LiveCycle ES so it might be possible to edit the form with Acrobat X Professional. If you have the data in an SQL database, you could possibly create a data connection and import the data into the form and save a copy of the completed form. You can also use the Acrobat JavaScript 'importTextData' to import a row of data from a tab delimited data file.
You might want to talk to other Real Estate professionals to see how they are going do this. If you have a property management program, that program might have an update to perform this task.

Adding a new field and new data item breaks layout

I am adding a new field to a subform and populating it form a .Dat unfortunatly adding this field is causing data outputed to the subform below it to shift down one line on the page when outputted.
This new field is outputted at the top of the form and and the line being shifted are below this.
Below is the field details and the field as it is in the .dat file.
Field:F_PO_NUMBER [1]
Lines: 1 Characters: 20 Angle: 0
In Subform
: Main_Page
Options
: Global
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^FIELD F_PO_NUMBER
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^GLOBAL F_TRX_TYPE
Invoice
Now the weird party is if I move the new field in the .dat as below it fixes things and the everything lines up like it should do.
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^FIELD F_PO_NUMBER
^GLOBAL F_TRX_TYPE
Invoice
^FIELD F_TRX_NUMBER
I hoping someone might have an idea of why this is the case as I'm at a loss regarding why its happening.

I may not hit on it exactly, but this sounds like Adobe's processing order.
It wants to process the fields in the order they are in the DAT file.
I have a similar problem with an overflow field, that isnt last in the DAT file,
Read this here:
http://forums.adobe.com/message/2298283#2298283
Now that may not be exactly your issue, but I think its the same inherent problem,
Adobes processing order for the fields/subforms.
I am still trying to resolve my issue, but found the ^field command in the reference manual (Print Agent),
and am wondering if I can use it.

Email form - new field

Similar Messages

Maybe you are looking for