Email in box is filling with no subject, undeleteable email, only on iPad.

In the past 2 weeks my email in box if filling with dozens of no subject emails, many dated 1969. They will not delete and they don't show on iPhone or on my Mac. Any ideas to rectify?

Two options:
1.  Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears.  Then let go of both buttons and your iPad will restart.  If that doesn't work.......
2.  Delete the email box from your iPad.  Then reinstall it. 
I have seen one or both suggestions offer relief from this issue.

Similar Messages

  • I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was

    I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
    RJ@

    Try to connect on Live chat one more time.
    Still not connected , better to contact Adobe Phone Support
    Click on Phone option and check once :
    Contact Customer Care

  • When I want to go back a page the drop down box is filled with the current page, all earlier sites have disappered out of sight

    When I have been at a site for a while and decide to go back, when I use the drop down box it has filled with the current page location. The longer I am there the more times it repeats its self.

    Did you try Safe Mode?
    An extension may be responsible for adding up those entries of the same page.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Need help with automatic page when a box is filled with a letter

    I use the Adobe Livecycle Designer 8.0, version 8.0.1291.1.339988.
    I'm trying to make a test for cars in Livecycle, where the car is tested and then there should be a box after every kind of test such as: Brakes front, brakes back, parking brakes, lights, engine, oillevel, exhaust system, clutch and so on..
    When a specific letter is written in the box a page should pop-up where the tester can write what the problem is. And then afterwards continune with the rest of the test.
    In the box, there should be four choices, a G, R and A. When there's a G there shouldn't pop-up a page, because that part is fine. But when there's a R (reparation) and an A (remark), this page should pop-up with the text of what part of the car it is and a text-field where the mechanic that tests the car can write what needs reparing or what's a remark.
    Can anyone help me? I really would appriciate it!
    Jacob Langer

    To support what King_Penguin has provided, here is a support document that describes the steps to take with a device in Recovery Mode. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Photoshop CS6 Filter boxes are filled with black when opening

    When I try to add "Extude, Wind or Tile effect",  from the stylize filter menu are opening up in black and not the normal color. I can't see the names on the adjustment slider. Does anyone not how to fix it? I am on a Mac.

    Have you run a utility to "clean" your OS recently? If so, you damaged the OS installation and are missing some files in the OS.
    Reinstalling the OS is the only known solution.

  • Need to creat box to fill

    i everybody,
    i need to creat boxes to fill with quantity.
    can you help me please.
    thanxs a lot

    I believe you are referring to user input field or a drop down option where user can select quantity.
    You can either use checkbox field in form with different label for quantities , or you can check this option :
    http://musewidgets.com/collections/all/products/forms-bundle
    Thanks,
    Sanjit

  • How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • Five days ago I received an email from an anonymous sender with the subject: Your Apple ID was just used to buy full album Elton John 312.99. Your receipt No. 37930343160405752. the content began: Content-Transfer-Encoding: base64 From (my email add

    Five days ago I received an anonymous email with the subject:
    Your Apple ID was just used to buy full album Elton John £12.99.Your receipt No.37930343160405752
    The content started: Content-Transfer-Encoding: base64 From:(my email address) followed by a very,very,very long stream of gobbledygook. There is no record of it in my i-tunes purchases or my credit card statement but that might only be because I have not updated my credit card details. Should I be worried that my account has been compromised? Does anyone know how I can get through to the right section of Apple to deal with this - all the emails I get say no-reply so I don't have an email address to contact them on.
    I would be most grateful if anyone could help me with this.
    Thanks in advance
    Walwal

    It's a phishing attempt to try and get your account and payment details - forward it to Apple : [email protected] , and then delete it
    Phishing emails : Identifying fraudulent "phishing" email - Apple Support
    Genuine emails : Identifying legitimate emails from the iTunes Store - Apple Support

  • Saving Outlook eMail to a hard drive folder with long subject lines

    I'm using Outlook 2010 on a WIN7 machine. I drag and drop eMails to folders on my desktop quite often and in the past (earlier version
    of Outlook) I would receive a warning that the file did not copy if the subject line was too long. When I drag and drop eMails with long subject lines now there is no visual warning or indication that the operation failed. I am aware of the file name/path
    character count limitation. My issue is the lack of a warning when the operation fails requiring me to have to check the length of the subject line before the operation or double check if the file is present after the operation. Checking after the operation
    is quite exacerbating when you are copying 15 - 20 files at a time. Is there a patch or something that can be done about this?

    Hi,
    We can also consider to get support about macro from MSDN forum:
    http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=outlookdev
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Inbox fills with old emails

    My inbox keeps filling with old emails.
    After I delete them another 50 fill up my inbox again.
    I use pop for email.

    MY question is... Why hasn't Apple responded to this issue?  Two years is  waaaaaay too long. i have this problem as well, and I want access to the music i purchased!!!

  • Don't want Mail to group emails with same subject together

    I got a new computer and now am using 10.8.4.  Mail is different.  I sent out an email to 20 people with the same subjuect line and text and when people replied, MaiL would put other replies all together on one long email.  I like seeing my replies separately in my inbox.  Can I change that?
    Also a real estate agent sends me new listings with the subject New Listing Updates.  So she sent me three today and they were all three in one email.  I almost forgot to scroll to see that there were two more after I read the first one.  I want them to be separate in my inbox.  Seems like it is the same problem as above.
    Thanks for any tips

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • How do I start with a circular blank space to be filled with text/pic?

    How do I start with a circular blank space to be filled with text/pic? All info I can find relates to rectangular shapes.Max

    Many thanks
    Max Emmons
    Date: Sat, 8 Jun 2013 09:30:22 -0700
    From: [email protected]
    To: [email protected]
    Subject: How do I start with a circular blank space to be filled with text/pic?
        Re: How do I start with a circular blank space to be filled with text/pic?
        created by hatstead in Photoshop Elements - View the full discussion
    Max,
    Open your picture fileAccess the cookie cutter tool in the toolbox. On the tool's option bar, click on the fly-out for the crop shapes. Select the circular shape (it's all black). Hold down the shift key on the keyboard and drag out the circle to embrace what you wish to retain. You can drag the circle to adjust further, then crop.
    To add text, get the type tool and type the text. This will be on a separate layer. Note that there are areas of transparency (checkerboard pattern) outside the circlular area.
    Use the Paintbucket tool to fill these areas. The tool uses the foreground color.
    Another option would be to place a layer below the circle layer and fill it with a pattern or whatever you want.
    Feel free to repost if this is not clear.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5390309#5390309
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5390309#5390309
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5390309#5390309. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Make a check box in LiveCycle with a personal character or image as check mark ( info to share...)

    Hello everybody,
    It makes now several weeks i go trough the different forums to find a way to make the check mark of a check box in LiveCycle with a personal color instead of the default black mark, that seems to be the only option available.
    I saw somebody else with that question, but no answer.
    So i found a work around, that make the check box really flexible.
    Here it is:
    REMEMBER that this will work only with forms saved as dynamic PDF.
    Open a new form in Livecycle.
    1) Open Library panel ( Shift+F12) and select Check Box and put it in the page with the dimension and position you like and select it.
    Open the Object panel ( Shift+F7), select field section and under Caption make it blank. Select Binding Section and under name write in ' CheckBox '. for the rest leave all the section values as they are.
    2) In Library select, in the standard section, the icon for making a text object. Put it in the page and size it to your needs and put it on the top of the CheckBox. Select it.
    In the Object Panel, Draw section and under Presence 'Visible'.
    Open the Font panel ( Shift+F4) and under font section, Font : select the Wingdings font and choose the symbol to use as the mark, under Size : the size you need, under Style: font color you like. If the result of the mark is to your feel, set the object to 'invisible'. Leave all other values as they are.
    Open the Hierarchy panel (Shift+F11), right click on the static object and rename it to ' CheckMarkModel ' .
    For information : changing the text object to an image object let's you use an image for the mark in the checkbox.
    3) In Library, select in the standard section the icon for making a Button. Put it in the page and size it to the CheckBox dimension and put it on the top of the text object. Select it. In the Object panel, under Caption : make it blank, under Appearance : select custom in the drop down list an in the dialog box that comes up set the edges to none and the
    background to none. Leave the rest as it is.
    Open the Hierarchy panel (Shift+F11), right click on the Button object and rename it to ' ClickCheckBoxButton ' .
    Now open the Script Editor (Shift+Ctrl+F5), on the left under Show : select in the list the ' Click ' event, under Language : select JavaScript, copy to the window the following script :
    if (CheckMarkOnOff.rawValue == "0")
    CheckMarkOnOff.rawValue = "1";
    CheckMarkModel.presence = "visible";
    else if (CheckMarkOnOff.rawValue == "1")
    CheckMarkModel.presence = "invisible";
    CheckMarkOnOff.rawValue = "0";
    4)Now put in the page an other Check Box, put it on the top of the Button object and select it. In the Object panel, Field section, under Caption : make it blank, under Appearance : none, under Presence : invisible, let the rest as it is. In the Value section, under Type : Read Only, under Default : Off. In the Binding section, under Name : name it CheckMarkOnOff, leave the rest as it is.
    5) So you have now four objects in the page 1. In the Hierarchy panel set each object by dragging them in
    this order :
    CheckBox
    CheckMarkModel
    ClickCheckBoxButton
    CheckMarkOnOff
    In the form select all the objects and group them. If you copy the group as many times you need you automatically will have an other Check Box, ready to work.
    So here you are with an personal Check Box.
    Don't forget to set the preview PDF to dynamic under Menu /File/Form Properties, the in the dialog box that shows up /Default tab and under the XDP Preview format : select in the list an Acrobat Dynamic form.
    REMEMBER that this will work only with forms saved as dynamic PDF.
    If somebody from Adobe could upload the sample file i made, to the forum, so that anybody can download it to his computer, would be appreciated, email me at : [email protected] .
    Regards Mike.

    I also faced this same problem and there is an actual solution but it involves modifying the xml source for the checkbox - however it is a simple modification so if your not familiar with editing the xml source don't worry about that. <br /><br />Click on the checkbox you want to modify and then click on the XML Source tab. LiveCycle will take you to that point in the XML. <br /><br />Now, scroll down until the close of the ui node( </ui> )within the checkbox field and modify the font node to look like the following:<br /><br /></ui>  -- close of UI node<br /><font typeface="Arial"><br />   <fill><br />      <color value="0,0,255"/><br />   </fill><br /></font><br /><br />This produces a checkbox with a blue check mark. <br />You can, of course, make the color any RGB number you want.<br /><br />You can then save that field in your library and reuse it anytime you want and it will always have that color checkmark. <br /><br />Good luck. <br />-Andrew

  • Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

    premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."   Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

    Jurgen Freund
    Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
    I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
    How to fix the ERROR 126 when you open OpenGL programs - YouTube
    The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
    LoadLibrary failed with error 126: cant find the required
    Please let us know if that worked for you.
    Thank you.
    ATR
    Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

  • Fillable PDF created on Mac, filled in on Mac's/PC's have empty fields when emailed to iPhone/iPad

    Hi!
    I create fillable forms on my Mac using Adobe Acrobat and both PC and Mac customers fill in the forms and submit them to their own customers.
    When I fill in the form on my Mac (using Adobe Acrobat) and email it to me and open the PDF on my Android the filled-in information is there.
    When I fill in the form on my Mac (using Adobe Acrobat) and email it to my customer and he opens the PDF on his iPhone/iPad all the filled-in information is gone, the fields are blank.
    When he fills in the form on his PC (I'm assuming he's on a PC, he may be on Mac but regardless he's having the problem) using the free Reader and emails it to himself and opens the PDF on his iPhone/iPad all the filled-in information is gone, the fields are blank.
    What can I do on my end, when using the full Adobe Acrobat on my Mac to create forms, to make them in such a way that when my customer emails a filled-in PDF from their computer the filled-in info stays intact on the iPhones/iPads?
    I can't tell each customer individually that he/she has to download a particular app because the PDF viewer on their phone won't show the filled-in information, that would a logistics nightmare, so I need to figure out what to do on my end when initially creating the forms so that the filled-in information will show up on their iPhones/iPads.
    Help please?
    Thank you so much!!
    Diane

    There are two basic approaches to this problem:
    1. Convince every user to use a compliant PDF viewer, one that supports forms (e.g., Adobe Reader, PDF Expert on iOS)
    2. Flatten the form after filling it in and before sending it along for other users to view
    You mentioned some of the problems with #1.
    For #2, if a form is flattened, the form fields will get converted to regular page contents, allowing non-forms-capable PDF viewers to see the data. Acrobat users can flatten a form a number of ways. The problem is with Reader, which doesn't have a specific form flattening feature. Desktop versions of Reader (Mac/Windows) flatten forms when they are signed with the new EchoSign e-signature feature and saved, but this feature is not available with forms that are Reader-enabled. All this means there is currently no way to guarantee that the data in a filled-in form will be viewable on all mobile PDF viewers, but there are some things you can do to increase the odds.

Maybe you are looking for