Email messages don't display in thunderbird message pane but wdseml file is good.

There are some email messages that don't display correctly in the Thunderbird message pane.
Either the pane is completely empty or chunks of html show up in the pane.
I checked the actual email file stored in:
C:\Users\Dave\AppData\Roaming\Thunderbird\Profiles\d976yxfm.default\Mail\pop-server\Inbox.mozmsgs
and it looks good, as the Windows 7 explorer window is able to show the email message cleanly in the preview window.
When I click on "View Source", it shows the wrong source file, I think.
The text in the "view source" window doesn't match the text in the ".wdseml" file at all.
Note: I recently migrated my C drive from a spinning hard disk to an SSD, perhaps this caused the weirdness? But, most of my email messages do display correctly, just some of them are hosed.
Any ideas how to fix?
Currently running Windows 7, 64 bit, latest update from Microsoft (as of 3/13/2014).
Thunderbird version 24.3.0.
Thanks for any help you can offer.

Windows still has a command processor.
So no need for bash.
type CMD into the search box to locate it
If you can use bash I assume your familiar with CD to change folders.
One little thing I use to save typing is I locate the folder in Explorer, click beside the path so it changes to a C:\ based item and use Ctrl + C to copy it and paste it into my CMD session. CTRL+V does not work, but edit on the windows system menu does.
To rename the files, navigate to the folder they are in and Copy *.wdseml *.eml
once you do the import return and del *.eml to clear out the duplicates from the first step.

Similar Messages

Can I tell at server-level if a message has been displayed in the Reading Pane in Outlook?

Hello,
Does anyone know if there are any traces at server-level (Exchange 2010) if a message has been displayed in the Reading Pane of Outlook 2010? The message would still be marked as Read in the recipient's mailbox.
Thanks,
- Alan.

Hi,
If you want to know whether an email has been read by recipient, you can either request a read receipt or enable the tracking for read status for messages by using the
Set-OrganizationConfig –ReadTrackingEnabled:$True command.
A related blog for your reference.
Question: Is it possible to check if a message has been read, even when the sender forgot to check the box “Request a Read receipt for this message”?
http://blogs.technet.com/b/ilvancri/archive/2010/04/13/question-is-it-possible-to-check-if-a-message-has-been-read-even-when-the-sender-forgot-to-check-the-box-request-a-read-receipt-for-this-message.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

My email messages won't display. The preview shows but when I enter the mail it is completly blank

My email messages have stopped displaying in both my mail accounts. I can see a preview but when I enter the individual mail the screen is blank. Not even the preview text is displayed. I have not changed any settings. Does anyone know how to resolve this.

Reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release.

Math fonts don't display in mail messages?

For some reason when I receive a mail message with math - fractions, equations, etc. these characters don't display. My husband has an iPhone 4 and this isn't a problem on his phone. I am wondering how I can get these characters to display?
Thanks

Hi markatos
Hi Rick Van Vliet
I have the same problem, and I can also (only) underline text.
Since upgrading to Tiger (10.4.8) from Panther 10.3.9, I have experienced a few daft functional problems, eg the 'Enter' key not working on the calculator (the standard one, not the Dashboard version). This turned out to be a '.plist' problem.
Mail was marking all outgoing mail as 'Junk' ... '.plist' problem again.
But I cannot see how to sort this one ... at the moment I am having to format text on a Stickie then paste it into a Mail message in order to do simple things like bold headings (I don't need any more than this really). So the 'Font' palette is working. Message format is set to 'Rich Text'.
Any ideas anyone?
Help will be appreciated.
Thanks in advance.
Paul

Received messages don't display

How do we knowweI have messages to check?.. we had 101 messages put on our home phone as prt of a bundle. We've put in a pin as requested and we are able to retrieve messages.....Our problem is how do we know we've recieved any messages. Our Uniden phone used to flash when we had a message but that does'nt work since 101 has been put on?? Any ideas please. Cheers jacqui

This might help you, If you have a mobile you can have a message sent when you have new messages, as well as this you will hear a different dial tone when you pick up the handset if a message is unread.

Error message "don't show me this message again", I need it back!!!

Stupidly I click "don't show me this message again" when itunes couldn't locate my music on an external hard drive. Apple help couldn't helped, so does anyone know how I can get this error message back so I can so itunes where to locate my music.

It's application specific. You can re-enable the warnings in your preferences by clicking the Reset All Warning Dialogs button.
Bob

Photos ap on mac will not email. shows "more" for extensions which has Outlook checked but does me no good

Why will new Photos ap on mac not email? No "email" pulldown -shows "more" for extensions which has Outlook checked but does me no good.

I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
More to follow tomorrow.
Anyone have any ideas?

Contact photos in Yosemite Mail messages don't display

My contacts all have photos and email addresses defined but mail messages only display the "initials" icon instead of their photo. This seems to be happening on both of my Macs and my iOS devices.
Anyone experiencing this found a fix? Thanks in advance.

Why are my messages out of order?: Apple Support Communities

10.5.2 - Mail hangs; generally sluggish; messages don't display

Since upgrading to 10.5.2, I'm experiencing various issues with Mail.app:
• It takes a long time to launch, and often hangs without ever fully launching, requiring a force-quit and relaunch.
• After launching, there's a general sluggishness throughout the app. The initial "checking for mail" sequence takes forever -- sometimes never completing.
• Often, items I select take far longer than normal to display; messages I select aren't displayed at all; or mailboxes I select -- mailboxes that say they contain messages -- will display no messages. (This behavior is sometimes accompanied by the spinning beach ball, but not always.)
• I sometimes have to force-quit and relaunch 3 or 4 times before I can actually use the app.
Users on other forums have reported similar issues. Has anyone discovered a fix for these issues?
Otherwise, Apple, we really need assistance, here. Needless to say, this is severely disruptive to our workflow and everyday lives.

My issue turned out to be for more complex than I realized. In addition to Mail.app's sluggishness, all of my syncing (calendars, contacts, mail, bookmarks, iPhone) had also ground to a halt. In System Preferences>.Mac, I was unable to even select the "Sync" tab. (Doing so "crashed" the System Prefs window and made the processor run hot, which made the fan come on.) So, with Activity Monitor, I traced the problem to the Sync Server.
A search, here in the discussions, led me to several users who had identical symptoms after installing Leopard or a Leopard update -- but no solutions. Finally I went to another Apple-related forum and found a solution. Someone there wrote:
+"trashing the ~/Library/Application Support/SyncServices/Local/ folder did it... Usually touching that folder brings good karma..."+
It seemed like a radical move, because on my MacBook Pro that folder contained over 500 megs of data (although I now suspect it was abnormally bloated). But I had everything backed up, so here's what I did:
1. I moved the folder, referenced above, to my desktop. (Note that "~" indicates your home folder.)
2. Restarted my macine.
3. Opened the .Mac preference pane, then clicked "Sync"
(Note: Previously, clicking "Sync" had been causing the Prefs window, so just being able to bring up that window was a huge victory.)
4. Clicked the "Advanced" button, selected the MacBook Pro, then clicked "Reset Sync Data" and made sure that I was replacing data on .Mac with the data from the computer (which I knew was good data). In other words, I made sure that the animated arrow was moving away from the computer and toward .Mac, indicating the direction of the data transfer.
(The folder I deleted in step 1 contained a lot of sync data. So without step #4, I was concerned that .Mac -- with its data having been deleted -- might have interpreted that as a signal to delete the data on the Mac. So I performed step #4 to make sure that didn't happen.)
5. Then I clicked "Sync now."
This was the first time I'd gotten sync to work for at least 36 hours. Also, after the sync was completed, the new "Local" folder, which replaced the one I deleted, only had 62 megs of data. Hence, my suspicion that the deleted folder was abnormally bloated.
So far so good.... I've got sync, and Mail is launching much more quickly now. Fingers crossed, but everything seems to be working well.

Messages don't display in chronological order. Why?

Sometimes messages about a week old appear at the bottom. While messages from today appear higher up. Why?
Conversation is with person from Europe while I am in US.... if this has anything to do with it.
Submitting picture. As you can see old messages are between messages that were sent Today.
Thanks

Why are my messages out of order?: Apple Support Communities

Captivate 3 - Error messages don't display

My slides have click boxes with errors attached. Error options are set to Pause for Failure caption.
Click box is postioned on the TOP of the timeline, and should be active, with a caption too, once the voiceover finishes.
Caption and click box displays but when I intentionally click elsewhere the error will not display.
Blue buttons in the RHS panel execute javascript but have no pause and no options defined for them except display for rest of slide.
Appreciate any suggestions thanks.

No answers here and I am wondering why. I have read past discussions about "Failure captions not displaying" and have noted all
the suggestions but still have not been able to get them working.
Click box is the uppermost (top) item in the timeline...and they are positioned after the slide voiceover so I would have thought there was sufficient time for them to become active.
Getting a little desperate about how to fix this.
Happy to try anything.
Regards
Rumbles

My iphone 4 and my girlfriends seem to be sharing messages. The display shows one person typing but it is actually going back and forth between devices. Any ideas?

We share and icloud and itunes account. But we have seperate carriers and phone numbers obviously. She sends me a mesage and it comes through on my ipad. I send her a message and it shows up on her phone as coming from her own number (no name is displayed, just the phone number). And the entire stream shows on her phone on the right hand side in blue as if she was doing all the typing.
Then a conversation I was having with another contact showed up on her phone displayed as if she was discussing. It was not a joint message but this contact is also one of her contacts. And the name displayed at the top was the other contact. She could join in the conversation too but her messages showed as mine. The other contact saw all messages but they showed as coming from my email address not imessage. I recently did the firm ware upgrade but she did not. Her phone says there is an error when trying to locate it.
Any messages sent to other contacts by her are only showing to the other contacts and not to me. And they are displayed properly.
It only started today and this has never happened before. We have both power cycled a couple times and wiped out all messages to start fresh as well. Nothing has worked so far.
Any ideas??

Note that if you are sharing the same AppleID when you activated iMessage the very first time, then you are literally sharing the same iMessage account. The primary account ID for iMessage is the AppleID used to verify the service the first time - then it associates phone numbers and email addresses as aliases to that account.
One of you needs to create a new AppleID and use it JUST for iMessage, so you each have a separate and unique iMessage account to use. So you can continue to share an AppleID for iTunes and iCloud and all your purchased content, just use different AppleIDs for iMessage.
If you need another email for AppleIDs (an AppleID is literally just an email address) just grab a gmail account to use. In iMessage, tap on the AppleID and log off, then log back in with the new AppleID and it will activate a new iMessage account using that AppleID.

Some child chms don't display topic in topic pane when TOC item is clicked

Okay. I'm not sure what's going on.
We have a master project and various sub-chms that get merged into the TOC of that master project. We have a fairly new sub RH project named "Toolkit Modules" that generates three additional sub chms that are also merged into the master help. They appear at the very end of the master project's TOC:
<master help's toc>
<10 other merged chms>
toolkitmodules.chm
toolkitmodules_blade.chm
toolkitmodules_vwmp.chm
All the topics for the three toolkit modules chms exist in the Toolkit Modules project and are conditionally marked with topic-level build tags so that the right topics appear in their respective chm.
I compiled the three toolkit chms and then put them in the master root directory so that when the master help is generated, they get included properly.
At first glance, all three of these chms appear to be working fine in the master TOC. I can expand and view the master help's TOC for the sub projects just fine, but clicking on a TOC entry does not display
the topics for these two chms in the topic pane:
toolkitmodules_blade.chm
toolkitmodules_vwmp.chm
I'm not sure why.
If I double-click and open up the individual chms from within Windows and view their contents, the topics appear as expected in those chms. It's just when merged, these latter two chms don't do anything from the TOC side. However, I have verified that the topics are indeed getting merged in, because I can use the Search tab to see the topics. In fact, the Locate button on the toolbar even expands the correct TOC and highlights the entry that matches. So something's just not working from the TOC side.
Any ideas?
I'm using RH 9.02.271
Windows 7 64-bit
HtmlHelp output (chm)
Thanks!

Jared
Right now I simply don't have the bandwidth to say "send me your project". You may see me ask others to do so but that will only be where I believe it will be simple or I just need to see something.
Take a look at Item 13 in http://www.grainge.org/pages/authoring/rh9/using_rh9.htm. That covers the fix to the merged CHM help problem that was used before Adobe fixed it in 902. Part of the problem was the HHP getting rewritten so maybe something there will help.
Any merged CHM help users able to pitch in here?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

DNG files don't display in Preview or Finder but okay in LR5

Virtually all of my DNGs from the last four years do not display properly when previewed in OSX's Finder or opened in the Preview app. Everything in Lightroom works just fine. I note that the "linear" option is off (seems to be the default) when I import from the SDHC card to LR. I have LR "Copy as DNG" and I apply nothing other than a renaming of the file (filename.date.dng).
I've dumped the files in Library/Quicklook but that doesn't do anything.
All the importing has been done with the latest version of ACR (Camera Raw 7.1 is the latest I have).
When I use Quicklook (spacebar) in the Finder or open the file using Apple's Preview app, all I see is a large black rectangle sometimes with some "noise" appearing in the frame. Yet LR has no trouble and I can export as jpeg or tiff without any issue.
I'm running 10.8.4 fully updated. I've dumped all the caches and cleaned everything using Onyx and restarted. Still not working.
Any ideas? The only thing I've noticed is my older DNGs (which came from a Fuji S9100) are 12-bit (and I -can- see those files in Finder preview and the Preview app!) whereas the newer DNGs (from 2009 and newer) which were shot with my S100fs are 14-bit. All the newer DNGs have the problem.
I've uploaded one of the "problem" images: http://www.adrive.com/public/6aMh4f/DSCF2743.dng
Any help is appreciated. Thanks!

Rob Cole wrote:
I whole-heartedly agree that although the big print giveth, sometimes the small print taketh away, DNG-wise.
I certainly would not convert my raw files to dng then throw away the originals. If Adobe provided a "revert from DNG" function, I'd recommend people give DNG a try (and not toss the originals), but as it stands:
(Adobe-converted) DNGs: great for limited, known, (usually Adobe-only) environments, but not for wholesale conversion of raws, not yet anyway (unless you don't mind locking yourself into an Adobe-only (or Adobe-mostly) software environment, in order to support "the cause").
PS - In my opinion, you may be going a little too far with this one:
BarryLevine wrote:
This is fraud.
but still - point taken.
Rob
"Adobe-only environments". Nope, sorry; that doesn't exist. Adobe makes software that runs on OSX and Windows.
I will bet $50 that buried in the OSX Lightroom code is reliance upon Quicktime. Adobe could rectify this. It's a lack of will, not technology.
I can be angry and upset but I will still use Lightroom because, in spite of this setback, LR produces DNGs that are smaller than TIFF and lossless PNG and produces better photos easier than other apps (including Aperture).
...and yes, I still believe Adobe's marketing is either fraudulent or just doesn't understand the technology.

Error Message is not displayed on the pop screen for chain end chain

Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzal

Hi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael

Email messages don't display in thunderbird message pane but wdseml file is good.

Similar Messages

Maybe you are looking for