Email repeat field

Hi,
I would like to add a second email field so that users are
required to re-type their email address (to avoid mis-spelled
addresses). Is there a way to do this with the spry elements (DW
CS3) or other ?
Not sure how to go about it.
Thanks

You are going to need to create your own js confirm then
create a .js file name it what ever you like then attach it
to you doucment as so
<script type='text/javascript' src='path to your
file'></script>
then add this to the .js file
if(el.hasClass('FIELD NAME TO VALIDATE')){
if(el.value != $('COMPARE TO').value){
valid = false;
this.setMsg(el, 'Passwords do not match');
}else{
valid = true;
now this works with classes not id so will will need to
assign a class to the two fields name them what you want then
replace the text in in the code. then remember to upload the .js
file to the server

Similar Messages

  • Creation of HR infotype with repeated fields

    Hi,
       We have a requirement in our project where in we need to implement the repeat field screen structure.
    We have to create an info type with ‘96’ fields in which some of the fields are repeated more than once.
    We have tried to create a table control to represent the repeated fields, for this we have a standard way which SAP follows. We have done the same way but we are not able to get the table control in the info type screen.
    We have done the following steps using this link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d52552575e11d189270000e8322f96/frameset.htm
    1) I have created a structure with the repeated fields of the info type
    2) created the entries in Mapping for Conversion of Repeat Structure/Tables (table T588AUTO_MAP) with the repeated fields
    3) For each type LINE screen structure to be used, a corresponding entry was defined in Mapping for Conversion of Repeat Structure/Tables (table T588AUTO_TABLE).
    4) I have created an info type with all these fields where in I should get the repeated fields in the table control format, but this was not happening.
    Is there any task to be done to link all these transactions before going for creation of the info type?
    Can any one suggest me how to get the table format on the screen with all these repeated fields.
    with regards,
    ramu mullapudi

    Hi Choudhury,
    Thanks for your reply. The infotype that you suggested solved my problem.
    Regards,
    RSS.

  • Sender FCC , problem with Repeating Field under a Sub-structure

    Hi,
    I have an Input File as
    D,TH_ ,10/31/2008,ABC,pieces
    PF, 10/31/2008,11/2/2008,11/3/2008,11/4/2008
    P,mat,CS,100,120,130,125,150,170,120
    P,mat,CS,100,120,100,110,140,120,110
    I need to Implement an FCC to convert this to
    a Structure like this
      Recorset
        Header           1....1
            Unique Id
            date Time
            CustomerCode
            Code
            Unit
        Dates         1
         date          1....n
        Products       1....n
          product      1
          unit         1
          quantity     1.....n
    This this is a Variable recordset type ( i.e each ROW has a Different Structure) the following keys D,PF,P  are defined, for the header, dates, and Product Information.
    The Following FCC parameters are applied
    Document Name :  MT_FILE_INPUt
    Document NameSpace = http://xyz.com
    Recordset Name = "Recordset"
    Recordset structure = Header,1,Dates,1,Products,*
    keyname              = Key
    Keytype               = String
    Header.FieldSeprator = ,
    Header.FieldName = Unique Id,date Time,CustomerCode,Code,unit
    Header.keyValue = 'H'
    Dates.FieldSeprator = ,
    Dates.Fieldname   = 'date'
    Date.keyValue    = 'PF'
    Products.FieldSeprator = ,
    Product.FieldName =  product,unit,quantity
    Product.KeyValue  = 'P'
    Now the Problem is as Follows:
    1) I have a Repeating Field Quantity under the Product and Date under the Dates Sub-structure,  This is not getting Repeated at all.
    Is there a Way to achieve the same
    2) Another Point is That, i do not want to take the key Value in the XML structure after converion, is there a way to avoid it
    Please let me know if any blogs are available
    Any help would be appreciated.
    Thanks,
    Best Regards
    Abhishek

    can u try.. i haven't tired this.
    quantity is occuring multiple times, but if that is fixed no# of occurance,, you can can try with this?
    P,mat,CS,100,120,130,125,150,170,120
    Product.FieldName = product,unit,quantity,quantity,quantity,quantity,quantity,quantity
    let me try ..
    As long as the quanitfy defined under Product.FieldName are more than the input msg quantity values (100,120..), you will be safe...
    Edited by: Anand on Oct 31, 2008 3:54 PM

  • Identifying Tables - Employee number field and email address field

    We need to identify specific tables for data extraction purposes. 
    The tables we need are - "employee number" tables (used in SU01) and "email address" field - (techinical info. field name - SMTP_ADDR)
    Thanks.
    Marie

    If you are looking for email addresses tied to user master records, then the table is ADR6,  you must link to this thru USR21.
    * Get email address
      clear smtp_address.
      select single adr6~smtp_addr into smtp_address
                    from usr21
                       inner join adr6
                            on  usr21~addrnumber = adr6~addrnumber
                           and  usr21~persnumber = adr6~persnumber
                                   where usr21~bname = sy-uname.
    Not sure that I've ever seen an employee number tied directly to a user in SU01.
    Regards,
    Rich Heilman

  • Table name for  email-address field

    Hi,
    What is the table name for email address field present in address tab of vd03 transaction

    >
    abap developer wrote:
    > adr6 table is for email address present in contact persons tab in vd03 transaction.I need the table name for email address field present in address tab in vd03 transaction.
    every thing will be stored in ADR6. with Different addressnumbers contact Person address is different and customer address is different.
    there will be 2 different entries in ADR6.

  • Email id field

    Hi,
        Can you please tell me in which table the email id field will be existing.
    Regards,
    Chandu.

    Hi,
    There are many tables in which email id is been stored. As the above post say ADR6 table and i can suggest you one more table in which email id is stored SZA5_D0700.
    It all depends tell me in which area you are in search of email then we can suggest you the correct table.
    List of tables SRIRAGRP, ECAMIOPREMAIL, ADR6, TO24, ADR6S, ADR6S, EFISEL.
    Cheers!!
    VEnk@
    Edited by: Venkat Reddy on Nov 3, 2008 3:26 PM

  • EMail ID field in transaction SU01and SCOT

    Hello,
    I would like to know what is relevance of "EMail ID field in transaction SU01" in sending/receiving mails.
    (SCOT is configured for SMTP Mail exchange.)
    Regards,
    Nirav Shah.

    Hi,
    As I mentioned earlier if You assign email address in su01 then system will consider it as your email id and used it while sending or receving the mail.
    e.g if you want to send email to <xyz>@<abc.com> and you have mentioned email id in su01 as <pqr>@<ccc.com> then system will send the email to <xyz>@<abc.com> in which from address is <pqr>@<ccc.com>
    But if you do not mentioned the <pqr>@<ccc.com> and you have defined default domain "comp.com" and your user name is "hello" then system send the email to <xyz>@<abc.com> in which from address is <hello>@<comp.com>
    Please email address after removing <>, as it is restricted to write any email address in the forum.
    I hope you got your answer

  • Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Hi Chhayank,
    the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
    Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
    ~Florian

  • Promoting a repeating field to a header field

    I have a field that is a member of a repeating field and has the same value all throughout the report. I need the contents of this field to be placed in the header portion of the report.
    I get the error..field F1 (which is my header field) references column (which is the repeating field) at a frequency below its group.
    Can anybody suggest how to do it....
    Thank you.

    Hi,
    just go to the data model and move the field which u r intended to be in header section move that in to group .
    .. and in layout move the field to main group ....
    reagards
    Kiran

  • Adding a Repeating Field

    Can I add a repeating field in a PDF, one where the end user can select to duplicate a field when filling out a form?
    Thanks for your help!
    Jeff

    You can create a form with duplicated field in FormsCentral, then export it to Submission-Enabled PDF. But you may not add a repeating field in PDF, then import form to FormsCentral. but there's no limitation if you create PDF form with duplicated field, use it locally.

  • Incoming Email Subject Field length increase

    Hi,
    In CRM 7.0,I need to increase the incoming email Subject Field length ,When i try to modify UI configuration,Subject fields are not enabled for configuration (Other fields in the same screen are enabled for modifications)..
    Please give your inputs whether incoming email Subject Field length  can be increased? if so,this should be done at UI level or mail form?
    Regards
    Shan

    Hi Prasenjit,
    Thanks for your interaction and response.
    Actually I can to find out views and class details in CRM 7.0 by using F2 key..
    The UI component is CRMCMP_CCS_EML and view is CRMCMP_CCS_EML/MailBody. The implementation class is ZL_CRMCMP_C_MAILBODY_IMPL. Since all the page attributes are string, There is a context class ZCL_CRMCMP_C_MAILBODY_CTXT, But no context node (Like you mentioned type CN as in *CN00, *CN01) within page attribute.
    The main issue am facing here is that couldnu2019t figure out where to start the debugging for inbound mails where the subject field is truncated. I usually process inbound mails from SOIN transaction.
    Moreover subject field can have more than 40 characters in outgoing mail, but the inbound mail subject field limited to 40 character and rest of them truncated.
    Hope you understand my area of concern and provide me your input.
    Regards,
    Shan

  • PDF template : how to have a multiple pages repeating field group

    Hello,
    I'm trying to create a PDF template.
    My problem is that my repeating field group is composed of 2 pages, so what my request has to generate will be N * 2 pages.
    But when I put the <?rep_field="BODY_START"?> and the <?rep_field="BODY_END"?> on two different pages, I can't generate the output.
    It looks like those BODY_START and BODY_END has to be on the same page.
    Could anyone confirm and/or provide help regarding my issue ?
    Thanks in advance.
    Regards,
    Nicolas

    Nicolaus, it appears as if Oracle is not willing to support templates generated using Adobe. They give us over a hundred pages on how to define an rtf template and then spend a measly 15 pages on PDF Templates. I have been successful in creating their example using the PO in the User Guide, but unsuccessful in repeating the outer group(which they don't tell you how to do or provide examples). So in summary you can print one PO at a time and the feature works great, but try to print more than one and you are screwed. Maybe it is time for someone from Oracle to make a post and make a believer out of all of us.

  • Repeating  field values per paage in Master Detail Report

    I know there are lots of threads about repeating fields values across pages but not seem to work that I have tried and I was looking for a simple resolution to my problem.
    I have a master detail report like:
    Deptno: 10 Dname: Accounting
    Empno Surname Job Sal
    1234 Smith Clerk 1000
    1235 Jones Clerk 1200
    Deptno: 20 Dname: Research
    Empno Surname Job Sal
    2234 Smith Clerk 1000
    2235 Jones Clerk 1200
    etc. The employee data is displayed in a Word table.
    Now if I use the standard emp/dept tables (with only 14 employees) the report paginates properly and I see one department per page and the corresponding employees per page. I have used the <?split-by-page-break: ?> tag. A sample of the rtf file is:
    <?for-each:dept?>Dept: <?deptno?> Name: <?dname?>
    TABLE of EMPS (via insert -> table ->advanced etc)
    <?split-by-page-break: ?>
    <?end for-each?>
    Everything works fine but if I then apply a larger xml file to this rtf where the number of employees spill over onto another page the deptno and the dname do not print before the table when I want them to.
    I have tried putting things into Word headers, using the <?start:body?> tag and a couple of other ways (like @section). Could someone be quite explicit about the steps I need to follow (rather than just say put it in a header) to make sure that if the employees spill over the page the deptno and dname will display. I don't know if its made more difficult because I have multiple departments but any help would be appreciated.

    I sent a template to Chris who was able to solve the problem.
    The change that he made was from:
    <?for-each:dept?>Dept: <?deptno?> Name: <?dname?>
    TABLE of EMPS (via insert -> table ->advanced etc)
    <?split-by-page-break: ?>
    <?end for-each?>
    to:
    Dept: <?deptno?> Name: <?dname?>
    <?start:body?><?for-each@section:dept?>
    TABLE of EMPS (via insert -> table ->advanced etc)
    <?end for-each?><?end body?>
    That is, he used the start and end body tags and the section attribute and took out the <?split-by-page-break: ?> tag. I put back in the split page tag on the template he gave me but it gave me an extra page each time the department changed. So maybe you can really only use one of the other.
    Regardless, Chris sorted it out for me, so thanks.

  • How to display repeating fields on PDF template?

    I'm having trouble printing repeating fields on a PDF. I followed the BI user guide but the report generates only one row. The sample XML file has 6 employees. I want to print a row for each employee using PDF as my template instead of RTF document. My data source is XML file and I am currently on PeopleTools 8.50 and Enterprise Portal 9.1. Please help.
    I have the form fields on the PDF as follows:
    Name: body_start
    Tooltip: <?rep_field="BODY_START"?>
    Name: EMPNO
    Tooltip: <?rep_field="T1_G1"?>
    Name: ENAME
    Tooltip: <?rep_field="T1_G1"?>
    Name: JOB
    Tooltip: <?rep_field="T1_G1"?>
    Name: SAL
    Tooltip: <?rep_field="T1_G1"?>
    Name: body_end
    Tooltip: <?rep_field="BODY_END"?>
    -- XML file -----
    <?xml version="1.0" ?>
    <ROOT>
    <LIST_G_EMPNO>
    <G_EMPNO>
    <EMPNO>7782</EMPNO>
    <ENAME>CLARK</ENAME>
    <JOB>MANAGER</JOB>
    <SAL>2450</SAL>
    </G_EMPNO>
    <G_EMPNO>
    <EMPNO>7839</EMPNO>
    <ENAME>KING</ENAME>
    <JOB>PRESIDENT</JOB>
    <SAL>5000</SAL>
    </G_EMPNO>
    <G_EMPNO>
    <EMPNO>125</EMPNO>
    <ENAME>KANG</ENAME>
    <JOB>CLERK</JOB>
    <SAL>2000</SAL>
    </G_EMPNO>
    <G_EMPNO>
    <EMPNO>7934</EMPNO>
    <ENAME>MILLER</ENAME>
    <JOB>CLERK</JOB>
    <SAL>1300</SAL>
    </G_EMPNO>
    <G_EMPNO>
    <EMPNO>123</EMPNO>
    <ENAME>MARY</ENAME>
    <JOB>CLERK</JOB>
    <SAL>400</SAL>
    </G_EMPNO>
    <G_EMPNO>
    <EMPNO>124</EMPNO>
    <ENAME>TOM</ENAME>
    <JOB>CLERK</JOB>
    <SAL>3000</SAL>
    </G_EMPNO>
    </LIST_G_EMPNO>
    </ROOT>
    Edited by: user8260115 on Jan 27, 2010 9:21 AM

    Can you advise me what needs to be done to view my pdf template with the given xml below. What would be the setup of my rep_fields.. I'm also getting the "FO Formatting failed" error when trying in BI Pub Template Viewer.
    <LIST_BILL_SEG>
    <BILL_SEG>
    <CALC_AMT>5</CALC_AMT>
    <BILL_SQ>0</BILL_SQ>
    </BILL_SEG>
    <BILL_SEG>
    <CALC_AMT>10</CALC_AMT>
    <BILL_SQ>1</BILL_SQ>
    </BILL_SEG>
    <BILL_SEG>
    <CALC_AMT>15</CALC_AMT>
    <BILL_SQ>2</BILL_SQ>
    </BILL_SEG>
    <BILL_SEG>
    <CALC_AMT>20</CALC_AMT>
    <BILL_SQ>3</BILL_SQ>
    </BILL_SEG>
    </LIST_BILL_SEG>

  • Display repeated fields label in data form

    I have created an input form with periods & years in columns. One column for current period & year according to user selection and the other for Dec of prior year. Whenever Dec period is selected, the "December" word will not display in other column because it is the same. It seems like system default not to display for repeated fields. However, users would like to see it. Does anybody have any ideas/workarounds for this? currently, i typed in the word "December." with a dot at custom header to make it looks different so that the comparative column header will be displayed.

    Hello Raul,
    where can I change this setting? in workspace?
    Thanks in advance.
    JC

Maybe you are looking for