Email - Spool List

Hi Experts - We have a report scheduled in the bacground. The spool file generated will be automatically emailed to a group using the standard PDF via Email output functionality(instead of sending it to a physical printer).
It works fine, the PDF attachment looks great excpet for the fact that the Subject line and body of the email are generated automatically by the sytsem.
Subject: PRD9226-1:<Report Title>
Body: The Mail Attachment Contains the Print File Created by User XXXX, with Number 9226-1 from SAP System PRD . To Print the Data, Open the Mail Attachment with a Suitable Program and Print the Document.
Is there a way to Change this subject and content? Any input will be greatly appreciated.
Thanks and Regards.
Sam.

Hi Suhas - I am using the standard output device configuraton in SPAD. This is done by creating a output device in SPAD and specifying the Host Spool access method as E-Mail to Receiver/Owner. So instead of printing to a device the list is emailed as a PDF attachement.
Not using any special coding for this.
Thanks.
Sam.

Similar Messages

  • Bacth job sending email : spool list recipient field

    Hi,
    When creating a batch job via SM36, it is possible to send the results via email (fill "spool list recipient").
    Is there a table where i can find the batch jobs which have the "spool list recipient" field filled?
    Thanks,
    P.

    Pete,
    In my system, I see only 2 values for this field. 'RECIPIENT' and BLANK. Please check if it the same with you, in case of more than these values, try to build your logic on ( not equal to RECIPIENT rather than non-blank).
    Even if these 2 values only, a job (with the same name) can be executed once with the spool list recipient ON and another without spool recipient. So, be careful in your checking that the record you are checking with the non-blank value of  RECOBJTYPE is the SAME execution as in SM37. Use fields SDLSTRTDT, SDLSTRTTM in table TBTCO for it.
    Hope you get my point.
    Regards,
    Diwakar

  • Want to know table which stores SPOOL LIST RECIPIENT & email addres

    Hi Guys,
    I need to create a report for all jobname & recipient email address. Kindly let me how to find out the recipent's email address for all jobname in TBTCP. I understand that recipent is the distribution list, distribution list has email address.
    JOBNAME ---> SPOOL LIST RECIPEINT -
    > EMAIL ADDRESS.
    thanks.

    Guys thanks for you help and time.
    I am not getting the expected result after doing above steps.
    I will try to clarify the requirement further.
    When I run t-code SM37 and enter following :
    Job name : TXDET-DAILY
    User name :  *
    Job Status : Checked Sched. Only.
    On next screen JOB OVERVIEW. Only one record shows up for job TXDET-DAILY.  When I double click this record, system takes me to next screen where there is button for SPOOL LIST RECIPIENT. When I click this button it displays the recipient is TXDET. TXDET is actually a Distribution list name, maintained in SAP office (SO01).
    When I go in t-code SO01 and click DISTRIBUTION LIST button and then enter shared distribution list name TXDET.
    It gives me 2 email addresses under this TXDET distribution list. 
    [email protected]
    [email protected]
    The spool from the job TXDET-DAILY will be emailed to these 2 email addresses.
    Now I need a report which gives following information.
    Job Name................. Distribution List Name...............Email Address         
    TXDET-DAILY............TXDET......................................[email protected]
    TXDET-DAILY............TXDET......................................     [email protected]

  • SM37 Spool list recipient - editing the email's subject

    Hello.
    I am using scheduled job to send automatically a list in email every day, using the option "Spool list recipient". The name of the job appears default in the email's subject. My question is this: Is it possible to modify the subject, for example puting the variable sy-datum in the subject of the email?
    Regards,
    Stefan.

    Hi ,
    Yes we can ,
    I hope u r using the FM SO_NEW_DOCUMENT_ATT_SEND_API1 to generate the email . In that  we have the
    i_packing_list-obj_descr = ' Enter what ever u r trying to put as header'.
    Regards,
    Bharani

  • Email multiple spools from background job - SM36 using Spool List recipient

    I create a background job using Spool List Recipient to email me the reports. The program that I scheduled to run creates 2 spools. When the spools are sent via email, only the last spool is sent.
    Please advise on how I can get the 2 spools sent via email.

    i would not use the Spool List recipient from Job and use the function RSPO_SPOOLJOB_TO_OFFICE in your Program instead.
    tell me if it helps.
    Regards,
    Laurent

  • Error in Email via spool list recipient feature in SM37

    Hello Experts.
    I encounter a strange problem. I am not able to send Email to external Email addresses (Lotus Notes) while I am using Distribution list option in spool list recipient option in SM37 background job. I am getting an error in SOST called 'Message cannot be transferred to node SMTP due to connection error (final)'.
    I am Able to get email with spool on my SAP inbox if I use the option 'Internal user' in spool recipient.
    Also, if I send an email in a custom program via function 'SO_NEW_DOCUMENT_ATT_SEND_API1', I am successfully able to send the email to Lotus notes id using the same distribution list. So, I suppose all the basis settings in SCOT, SU01, SICF are correct.
    I checked with my basis team as well but they also see all the email settings as correct.
    My spool is very small one and I have all the access in the system.
    Anyone having any idea for this issue, please share.
    Regards,
    Diwakar

    I found the answer myself.
    In SCOT, SMTP setting, Output format for ABAP list needs to be set as 'PDF' or 'TXT' instead of 'HTM'.
    With HTM, it was going in for error for spool email.
    Regards,
    Diwakar

  • Send spool list ceated by Job (SM36) as pdf-file via email

    We are running the report RM06EFLB (Transaktion ME84 - "Create Releases") in the background.
    The Job is creating a spool list with 17 pages.
    I want to send this 17 pages (in a readable form) to a number of persons.
    This did I try so far:
    - Distribution list with Recipient type "via Internet" as Spool list recipients in the Job. (Tried different formats for ABAP List in Transaction SCOT)
    => Email is send to recipients, attachment is readable depending on format.
         Problem: attachment is not complete, it contains only about 15 pages (985 rows).
    - Distribution list with Recipient type "Internal User - SAP-Office" as Spool list recipients in the Job.
    => Document is sent to Business Workplace
         Problem:  attachment is not complete, it contains only about 15 pages
    Any ideas how to get the complete spool list?
    Is there mayby a report around  that is sending a spool list as pdf-file via email to a number of recipients?
    (Would like to maintain this Report as an additional step in the job. The spool-number should be selected from the previous step.)
    Thank you for your help.
    Jens

    Oh sorry - here is the coding which is used in that program:
    First use function module  'CONVERT_ABAPSPOOLJOB_2_PDF' to convert the spool entry into pdf.
    Loop at output table PDF and concatenate all lines into a string. Convert string to xstring.
    Then call mail class:
    DATA: lv_pdf_x TYPE xstring,
            lv_subject TYPE string,
            lv_doc_desc TYPE so_obj_des,
            lv_mail_body TYPE soli_tab.
      DATA: ls_atta TYPE rcf_s_att4mail_hex,
            lt_atta TYPE rcf_t_att4mail_hex.
    * -- Fill parameter
      lv_subject = 'Requested Report'."#EC NOTEXT
      lv_doc_desc = 'Report XXL'."#EC NOTEXT
    *  lv_mail_body = ?
      ls_atta-name = lv_doc_desc.
      ls_atta-extension = 'PDF'.
      ls_atta-content = p_pdf_x. <- This is your xstring
      APPEND ls_atta TO lt_atta.
      TRY.
          CALL METHOD cl_hrrcf_services_mail=>send_web_mail
            EXPORTING
              p_subject              = lv_subject
              p_receiver             = p_receiver->email_address
              pt_atta_hex            = lt_atta
              p_sender               = p_sender->email_address
              p_body_c               = lv_mail_body.
        CATCH cx_hrrcf.
      ENDTRY.
    I hope that you have the above mentioned class in your system but it should work with other email functions as well.
    Regards
    Nicola

  • Spool list for Background job

    Dear all ,
    The background job is already scheduled daily (PR NOT PROCESSED BY PURCHASING) , isn't possible to check the list of users is assigned in the spool list recipiant, I have checked spool list , but its shows only one id ....
    how to check the list of Spool users ...any alternate option ?
    Kindly advise
    Regards

    Hi ,
    I have created a distribution list and i have included  the email ids also .
    any other activation is required for Distribution list ?
    how the background job is sending a report to Distribution list or i have to assign a distribution list to Background job .
    Kindly suggest
    Regards

  • Adding Spool List recipient

    Hi Team,
    When setting up a user to receive emailed reports the "Spool List Recipent" is not retaining the email addres
    It is saved as part of the SM36 set up. But when going back to check in SM37 the error is No Spool List recipient.
    Could you please help me on this.
    Regards
    Raghu

    Thanks for your valuable suggestions
    Furtherance all the reports printed to a particular printer. But few of the customers didn’t receive those reports. Even though I didn’t set them to print, but still we are getting prints. We set them only to receive mails.
    In the successful job log I found “Error sending data (2)” Message no. PO780
    Laurie , did u face this issue in your tricky. Does all this issues may helpful in this note 1810625
    I really appreciate your help in advance
    Regards
    Raghu

  • Spool List Recipient

    System is ECC 6.0. SCOT has been configured and I am able to send mails from SAP to E-mail recipients.  I am able to give only one email ID as spool recipient when I schedule job in SM36.  I want the output(spool) that is generated to be sent to multiple E-mail ID's.
    Please suggest.

    Hi
    The very quick solution which comes to mind is :select distribution list in spool list recipient
    The DL list can be created by your exchange people and add the name required by you to same
    I have not seen multiple user selection there .
    Success !!
    -Ganesh

  • How to set multiple receivers in the spool list receipent in SM36 ?

    We want that the result of a background job can be sent to multiple users. The user email address will be the external address such as, zt330300-163.com, zt330300-tom.com?
    Can you help me ? th

    Hi,
    This can be achieved through creating distribution list and assign the distribution list in the spool list recipient.
    Regards,
    Prasana.

  • Spool list receipient in SM36

    Hi,
    I run a report in background that has 220 pages list output.The same is sent to SBWP after I maintain spool list receipient parameters.But when I open the attachment in inbox I can see only 25 pages attachment displaying, of size 17K.Are there any settings that restrict the size or any way to see 220 pages full.
    Thanks,

    Refer to OSS Note 329537(Spool cut off at 1000 lines when sent to recipient) - The resolution is based on the version of SAP you are on. I had the same issue when I sent a large log file via email to a user and the log was truncated.
              Regards,
                  Mike

  • Send mail to spool list recipient from dynamically generated job

    Hi Friends,
    We are running the SAP payment run daily in background mode using the transaction F110S (program SAPF110S). We have scheduled the program SAPF110S to run in SM36 and have specified an email address there as Spool List Recipient.
    The problem is that SAPF110S itself will dynamically create two new jobs: a job for the Proposal Run and a 2nd job for the Payment Run of F110.  The name the system assigns to these jobs are generated at job release/start time in the format F110_CompanyCode_yyyymmdd - X (for the proposal step) and  F110_CompanyCode_yyyymmdd (for the payment step).
    The proposal and payment steps can create spool output. We want to have that mailed automatically by the system to a spool list recipient.
    The problem is that these proposal and payment job steps which are created do not get a spool list recipient assigned, it is empty in SM37.
    Is there any way to ensure that the spool list recipient which is populated in the calling job in SM36 gets transferred to the dynamically created proposal and payment steps jobs?
    Thanks for your advice.
    regards
    Mike

    Hi,
    At the moment sending custom e-mails from front-end via forms is not a feature on our road-map.
    What information do you want to include in the respective form, what are the fields supposed to be present in the form? You still have the auto-responder and the custom message in the workflow that could hopefully assist.
    Kind Regards,
    Alex

  • SM36 email spool

    Hello,
    In SM36, Is it possible to send email (via spool list recipient) only if the report has output?
    Best Regards,
    Amir Dror

    yes.
    use this FM,
    RS_SEND_MAIL_FOR_SPOOLLIST

  • Spool list recipient in SM36

    Hi All,
    I am using the FM's JOB_OPEN, JOB_SUBMIT and JOB_CLOSE in a report program to create batch jobs.
    Now some of the batch jobs have DL's  to which spools of the batch jobs are sent and are maintained in 'SPOOL LIST RECIPIENT' button of SM36.
    In the report which uses the above FM's to create batch job, is it possible to include this functionality.
    That is when a batch job is created from my report program, the spool list recipient should have the DL provided in my report program.

    Hi Arun,
    Refer This Link
    http://help.sap.com/saphelp_bw21c/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
    Thanks.

Maybe you are looking for