Embed sound files and decide on the quality?

I'm embeding an mp3 file like this:
[Embed(source = "file.mp3")]
that's all ok, but how can I change the quality of the file?

Some of the problems of loading resources can be fixed by using the context class loader..
Thread.currentThread().getContextClassLoader()
If that does not fix the problem, we might need to see an SSCCE* of the code being used, as well as a description of the structure of the jars containing the sounds.
* <http://www.physci.org/codes/sscce.html>

Similar Messages

How do I "join" an mp4 sound file and a 'photo that I can upload to YouTube?

Thanks.

Drag the photo to your project timeline. Now drag the sound file directly onto the photo thumbnails - a green bar will appear under the thumbnails. You can drag this bar back and forwards to correctly position it.
Double-click on the photo to open the Inspector and change the duration to the length of your sound file. Finally, drag the end of the sound file to the end of the photo thumbnails, so that the full sound file plays in the project. Change the photo duration again if necessary.
If you click on the icon to the left of the Project thumbnail slider, the sound file waveforms will appear within the green bar. You can drag fade markers inwards at either end of the waveforms to create a fade in or fade out effect.
John
Message was edited by: John Cogdell
NOTE: I'm assuming that you are using iMovie '11, although similar procedures apply to iMovie '08 and '09 (with the main exception being waveforms).

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

Sound file and custom play.

Hello, I have an sound file and, want to play part's of this file not the whole sound file every time, in my application.
e.g i want to play from 1:23 min till 1:29 min can i do this in an iphone app and how?
Thanks in advance!

yes i know that way, but i want to have a big sound file and keep some pointers in an array with the seconds i want, depending some user actions, the whole sound file is usable, but in different user actions different parts of it will be played! Is there a way doing that? Without splitting the file into pieces?
A similar example could be found at youtube comments when someone writes a time point...example 3:25 of the video this refers to a link and when its pressed you auto transferred to the 3:25 'th second of the video....I tried to give you a related usage...I dont know if you understand what i mean...
thanks anyway!
Message was edited by: ZaaBI_AlonSo

How do I record a sound file and send it as an attachment using my 4s?

How do I record a sound file and send it as an attachment using my 4s?

Hi,
The following is the program[Click Here| http://saptechnical .com/Tips/ABAP/email/EmailProgram.txt] which will send any format file. Actual Creator of the program is Amit Bisht.
Thanks & Regards,
Rock.

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output?

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output? Is there any other ways of achieving this?

wongrayd wrote:
Thanks. I do not have the experience on burning discs from iMovie for the movie after editing (ie for video discs players). It seems that i cannot find the relevant command in the tool bar for this purpsoe. Would you please show me the way?
The command is gone because iDVD has been discontinued by Apple. After Apple discontinued iDVD they removed the iDVD burning link from iMovie. I still use iDVD sometimes, only because I have an old copy.
wongrayd wrote:
You have mentioned about Handbrake as a converter. What is the RF no. (under Constant Quality) meant? It seems that the smaller the no. is, the better quality will be. What is the optimal no.? or should we use the Average Bitrate? Again, what is the best rate? Furthermore, which format is more suitable or the best: H264 or mpeg 2/4?
I don't know what RF means. When I have used HandBrake, I've used presets that apply to what I want to do, so I don't know the meaning of each individual setting. However, it appears that many of them are listed in the HandBrake User's Guide that is linked from the Help menu in the program:
https://trac.handbrake.fr/wiki/HandBrakeGuide
wongrayd wrote:
For iMac, except iMovie, what other software is the best for the amateur? I have read Photoshop. Can this support m2ts files and user friendly?
Photoshop is not amateur-level software, and although it can edit a video, it cannot burn a DVD. Unfortunately, because I still use iMovie, I haven't tried anything else. You might want to read the reviews of various DVD-burning applications in the Mac App Store.
And maybe another forum member will jump in and help us here!

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error

When I add a sound file to a slideshow the slides stop changing

How can I add a sound file and have it play through the entire slideshow in Acrobat Pro X?

Here is the solution. Go the area where you placed your the file, right click it and select properties, then change the Playback Style to "Play content in floating window". That solved the problem.

My 5 year old iMac's hard drive is at the point of failing. I'm trying to save al files on it, but it wont allow backup via Time Machine to an external hard drive. How can I keep from losing all the files and programs if the hard drive fails?

I'm concerned that my iMac, purchased 5 years ago, is about the crash and I can't back up my files and programs to an external hard drive via Time Machine because the computer freezes after only a couple hundred MB and gets nowhere near the required amount.
How can I save these files and programs if the computer hard drive fails or has to be replaced without the backup being able to be done? I need to do something quickly, but I'm not sure what I can or should be doing.

Get an external hard drive, some good ones that I like are the OWC, http://www.macsales.com Mercury Elite Pro drives...they are very good and reasonably priced.
Get the drive, connect via USB or FireWire, then use Disk Utility to format the new drive as Mac OS X Extended (Journaled), and then use Disk Utility to Restore the current drive to the new drive. Restore actually clones the drive so you will have a bootable backup on the external drive.
After you have formatted and named the external drive, click Restore in the main Disk Utility window, drag the name of the old hard drive to the Source box, and drag the name of the new external drive to the Destination box. DU will make an exact clone of the internal drive on the external drive.
That clone will be a complete backup of the operating system and all of your data.
You can test it by restarting the iMac and hold the Option key. That will give you a grey screen showing all bootable drives. Just click the external drive, then click the upward pointing arrow under it and the iMac will boot from that drive.

How to read the data file and write into the same file without a temp table

Hi,
I have a requirement as below:
We are running lockbox process for several business, but for a few businesses we have requirement where in we receive a flat file in different format other than how the transmission format is defined.
This is a 10.7 to 11.10 migration. In 10.7 the users are using a custom table into which they are first loading the raw data and writing a pl/sql validation on that and loading it into a new flat file and then running the lockbox process.
But in 11.10 we want to restrict using temp table how can we achieve this.
Can we read the file first and then do validations accordingly and then write to the same file and process the lockbox.
Any inputs are highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Hello Gurus,
Let me tell you about my requirement clearly with an example.
Problem:
i am receiving a dat file from bank in below format
105A371273020563007 07030415509174REF3178503 001367423860020015E129045
in this detail 1 record starting from 38th character to next 15 characters is merchant reference number
REF3178503 --- REF denotes it as Sales Order
ACC denotes it as Customer No
INV denotes it as Transaction Number
based on this 15 characters......my validation comes.
If i see REF i need to pick that complete record and then fill that record with the SO details as per my system and then submit the file for lockbox processing.
In 10.7 they created a temporary table into which they are loading the data using a control file....once the data is loaded into the temporary table then they are doing a validation and updating the record exactly as required and then creating one another file and then submitting the file for lockbox processing.
Where as in 11.10 they want to bypass these temporary tables and writing it into a different file.
Can this be handled by writing a pl/sql procedure ??
My findings:
May be i am wrong.......but i think .......if we first get the data into ar_payments_interface_all table and then do the validations and then complete the lockbox process may help.
Any suggestions from Oracle GURUS is highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Can I change my iCloud email address and keep all of my music, apps, files and mail in the cloud and on all of my devices?

Ok, so here's the deal. I want to change my iCloud email address. Ultimately I want to keep the same Apple ID and simply edit the part before the '@icloud.com'. If this is not possible, can I make a new Apple ID and transfer all of music, apps, files, and mail to the new Apple ID and all of my other devices?
Thanks in advance, Scotty P.

You cannot change your iCloud email address but you can setup a new alias: http://help.apple.com/icloud/#/mm6b1a490a
You cannot transfer purchases from one AppleID to another.

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder.

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

I got a java excutable file and document from the instrument supplier I want to use it in labview , I want to Know how to do it , step by step

I got a java excutable file and document from the instrument supplier I want to use it in labview , I want to Know how to do it , step by step
Attachments:
this is a java file changr the jpg to jar .jpg ‏101 KB

I'd recommend searching the forums to find your answer. http://forums.ni.com/ni/search?submitted=true&q=java+labview

HT201066 QuickTime: I'm trying to open a .WMV file and I get the following message.

I'm trying to open a .WMV file and I get the following message.
"The document “.wmv” could not be opened. The movie is not in a format that QuickTime Player understands. You may need to download additional software.

Two other possibilities.
Video Player - Divx
Video Player - VLC

Embed sound files and decide on the quality?

Similar Messages

Maybe you are looking for