Embed video from host server?

How do I embed a video on a Muse page that is on my own host server? I have videos that are on a host server that I want to play on a Muse page. I do not want to upload them to Youtube or Vimeo.

You can always add some Video Player Widget that links to the videos you have stored on your FTP.
muse-themes.com has a couple of those.

Similar Messages

Embed streaming video from FlashMedia Server 2 in a Captivate Course

I am trying to add streaming video from FlashMedia Server 2
Developer Edition in a Captivate 3.0 course. The streaming server
is working fine and I can stream video from a Flash 8.0 file. The
problem seems to be in Captivate 3.0 because the video will not
display in a Captivate swf file. The html and swf file resides on
the web server therefore it cannot not be a security issue. When I
try to play the Captivate file; it does make connection to the
media server however the flv file will not stream. The Bytes
Out(Bytes to the client) number stops incrementing after a 1,000
bytes. Once you close the browser then the connection to the media
server is lost. However if I insert a .fla file from Flash
8.0(which will connect to the streaming server and play) and
publish it in the Captivate project; It will connect to the server
and playback the audio but not the video. I turned on and off
hardware acceleration on my video card thinking that was the
problem. I would appreciate any help on this. Once I get this to
work I can justify purchasing the full version of the Flash Media
Server.

I think this isn't really an InDesign issue at all. It sounds like an Acrobat issue.
First, you haven't said what version of Acrobat you're using. I'm assuming Acrobat X Pro?
I've used this with a friend's Flash Media Server so I know it works. What version of Flash server do you have installed?
I the link you provide I see a spaceband after the word "test" in the path. Could that be a problem?
Other than that, it appears that you're following the requirements listed in the Help file for Acrobat X Pro.
If you have further problems, you might post this on the Acrobat User Forum.

Muse Crashes when I try to embed video from YouTube

Muse Crashes when I try to embed video from YouTube.
The video is 560 X 315. Is that a problem?
Also, does anyone know when Muse will get drag and drop video embeing? Can't wait!
Looking forward to getting an answer.
Thanks,
Eddie

Hi,
There's a change to how YouTube's embed code works, and the crash is expected.
Could you please follow the steps mentioned in this post?
http://forums.adobe.com/message/5431019#5431019
That should help fix the issue.
Regards,
Suhas Yogin

Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router

Very much appreciate any help getting streaming video feed from web server built into video application to work properly using port forwarding on my Linksys WRT54g wireless router.
Here is the situation:
My PC is connected to the internet via a Linksys WRT54g wireless router.
The Windows XP Pro SP2 firewall is enabled, with a firewall exception established for the video camera application.
On the router, forwarding of port 80 is enabled for the LAN IP address of the PC running the video application with an embedded web server, and the web server in the video camera application is also set to use port 80.
I have a free DYNDNS account and also run the DYNDNS updater program on the PC running the video application with embedded web server. According to the DYNDNS web site and the DYNDNS updater program, the IP address assigned to the machine running the video application with embedded web server is set correctly in my dyndns account.
When I open a browser (Explorer or Firefox) on the PC running the video camera application with embedded web server, I am able to connect to the video application's web server by going to the dyndns address linked to the machine running the video application. The video application's web server is set to use the dyndns address. That's the good news. The bad news is that I can't connect to the video application's web server from any machine that connects to the internet that uses a router other than the router used by the PC running the video application. I am only able to connect to the streaming video from the application's web server only on machines that connect to the internet using the same (home) router used by the PC that is running the video application.
Since I am able to connect to the video app's embedded web server successfully on the machine running the video application, it seems that at least something about the current port forwarding settings is correct. For example, if I uncheck 'enable' for forwarding of port 80 on the router settings page, I am no longer able to connect to the video app's web server when I try to do so in a browser running on the machine running the video app. When I re-enable port 80 forwarding on the router, I am again able to connect to the web server of the video application on the machine running the video app. I thought that by enabling forwarding of port 80 on the router and associating that port with the LAN IP of the machine running the video application, it would be possible to connect to the streaming video of the video app's embedded web server from ANY machine connected to the internet, but that is not the case. There must be some other router settings to update/change in order to get the port forwarding working to enable a successful connection to the video web server, but I am stumped. Very grateful for any suggestions as to how to get this working properly.
Thanks in advance...

The firewall log can be configured on the third tab in the window for the firewall settings, where you can turn the firewall on and off completely.
From your tests, though, it does not seem to be the firewall. However, to be sure, it would be good to check the log. It will help to eliminate the firewall as the culprit and you may find it handy in the future, too. ;-) Just don't forget to turn the log off again after you are done because it may cause some performance penalty on your system while on.
From what you write, it seems as if I should give a little networking background on the ip addresses you'll see. Your setup is (or should be) a modem connected to the WAN/Internet port of the WRT. The computer is connected into a LAN port of the WRT.
Your router has two IP addresses (that's what makes it a router): a WAN address and a LAN address. The WAN address is the address assigned by the ISP. It is a normal internet IP address. Everyone is able to send packets to this IP address. The WAN address is the one reported by whatismyipaddress.com, it should be listed in the dyndns record and it is the address that your router shows on the Status page. It's the public IP address of your router. Dyndns maps your dyndns.org name to that IP address.
Your router also has an IP address on the LAN side. You can configure it to be whatever you want. The default is 192.168.1.1 with netmask 255.255.255.0 and it is better to leave it like that or at least inside the network 192.168.*.*. 192.168 is a special, reserved IP address range for private networks. Basically, routers in the internet are not supposed to forward addresses in this range. That makes them suitable for private LANs as the packets never can get anywhere. Most people using Linksys routers have there LAN in 192.168.1.*.
The router acts as gateway, which means it forwards packets from PCs in the LAN to the internet and back. As all your PCs in your LAN share a single WAN IP address, the gateway does address translation (NAT). This works only in one direction: from the inside to the outside. The router remembers when a PC in your LAN sends something out and accepts the responses in and sending them back to the PC. If something comes in from the internet which cannot be associated with a ongoing communication the packet is dropped unless you use port forwarding.
All computers in your LAN either have a static IP address assigned or use DHCP to get it automatically. The router has a DHCP server as well which gives out IP address from 192.168.1.100-149 if not changed. With a router with default settings static IP addresses can be in the range of 192.168.1.2-99 and 150-254.
ipconfig /all reports your IP address in your LAN, i.e. an address 192.168.1.*. The gateway in this output should be 192.168.1.1 which is your router. And packet no in the LAN address range 192.168.1.* is send to the router which forwards the packets into the internet.
An address 192.168.1.* should not appear as internet address in the Status page of the router nor should it appear at dyndns.
Port forwarding is used to operate a server in the LAN. By default, a server in the LAN cannot be reached from the internet. You have to configure port forwarding for this. You configure that traffic bound for a specific port (e.g. TCP port 80 for http) on your WAN IP address is forwarded to the same port on a specific LAN IP address. If your server runs on 192.168.1.50 than traffic to your WAN IP address port 80 is forwarded to 192.168.1.50 port 80. That way your HTTP server can be reached from the internet. As you can only configure a fixed IP address in port forwarding it is recommended that the server uses a static IP address and not DHCP as in the latter case the IP address may change over time...
O.K. so much for networking. I hope that makes things a little clearer and you can verify that your setup is how it is intended to be.
I suggest the following: on the router's security page there is an option to block WAN requests. Remove the check if it is set (meaning: do not block). After you did that change you should be able to ping your WAN address (e.g. ping xxxx.dyndns.org) from the internet. That way we know that it is on the correct address.
Also on the Administration page make sure that remote management is disabled (should be like that per default) or that the management port is NOT 80 but for example 8080. What is your your UPnP settings on the same page?
O.K. that should be enough for the moment...

I used to be able to embed videos from YouTube but...

...it seems I no longer can. When I try to embed, it says "Firefox can't find file at..." and then it lists the embed code. I've used Firefox for 5 years and never before had this problem. It seems to only be happening with newer videos, not older ones. Does anybody have an insight on the problem? Solutions? Thanks.

Are you using the YouTube widget in iWeb? If so it doesn't work any more. Not since MobileMe was discontinued.
You need to get the full embed code from YouTube and use the standard HTML snippet.
OT

How To Stream A Video From A Server

var nc:NetConnection=new NetConnection();
nc.connect(null);
var ns:NetStream=new NetStream(nc);
ns.play("MySample.flv");
var video:Video=new Video(200,100);
video.attachNetStream(ns);
addChild(video);
video.x=200;
As seen above, I have only one idea how to take an external video file which is not in library.
My real problem is --->
If I put this swf to a domain and put in the same domain this video also, what sholud be the link like.
There is an rtmp protocol and fms server which I have little knowledge.
Also , is a url loader or request method available for external video files to play in the swf.
As much as I guess, there will be a change in the below null parameter, but how...
Shold I use an fms server or for short videos only a connection is enough ???
nc.connect(null);

I took this below code from a tutorial but opposite of this tutorial, I want the swf to take the video from the domains server where it was published from...
Not from a internet hyperlink adress, but how ?
function connect():void {
04
    nc = new NetConnection();
05
    nc.client = this;
06
    // STEP 2
07
    // note null
08
    nc.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
09
    nc.connect(null);
10
11
12
function startVideo():void {
13
    video = new Video(640, 385);
14
    video.x = video.y = 20;
15
    addChild(video);
16
    video.attachNetStream(ns);
17
    // entire url is passed into play() method
18
    ns.play("http://www.mydomain.com/videos/interstingVideo.flv");
19

Is it possible to embed video from another site in wiki?

every-time i try and add in html code to embed video in the wiki page (not podcasts) it deletes it after i save and nothing happens

Hi,
The current wiki relies on html 4:
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
Embed tag is not a standard part of html 4 and is new in html 5. html 4 allows the object tag or the iframe tag to perform the external link function. Both object and iframe need to be added to the wiki whitelist for inclusion in the page html.
iframe creates a separate window that allows you to show the page with the video or rss link that you want to include on the wiki page.
object would show up as an separate window as well but has different issues depending on brower.
I have used iframe with good results as an alternative to uploading data to the wiki page.
HTH,
Harry

Embed video from video hosting site?

Hi,
I use Viddler as a video hosting site. Is there any way to embed either an iFrame or other embed code in a slide? Ususally the videos are too big to place directly into the project.
Thanks!
Mark

I've never used Viddler, but if it's similar to YouTube, you might try the Web Page Widget by CaptivateDev. I've been testing it lately and it seems to work great for YouTube. You can download a free trial to take a look at it.
Dan

Embed videos from Vimeo

Hi
I got this code from Russ earlier, and it worked fine:
Create the button and open the code panel for that button. Create a click action. Within the code panel, paste this:
var youtubevid = $("<iframe/>");
sym.$("vcontainer").empty().append(youtubevid);
youtubevid.attr('type','text/html');
youtubevid.attr('width','425');
youtubevid.attr('height','350');
youtubevid.attr('src','http://www.youtube.com/embed/ykF1y2EJ2nI'); // url/Video_Id
youtubevid.attr('frameborder','1'); // 1 | 0
youtubevid.attr('allowfullscreen','0'); // 1 | 0
What that does is empty the existing vcontainer, and places a new one with the new youtube video. You can add this to as many buttons as you like, obviously changing the URL ID for each, and it Should swap the video for you on click.
But how would it look like with an embedded Vimeo-player?
Br
Martin

i just changed the youtube link to a link from vimeo and that worked

Why the hell can't the Flash player skip back a video like three seconds without re-loading the video from the server and make you fuɔʞing wait 10 seconds?

So, why?

Hi giuliano,
Like you I have tried all these things above without success. It's interesting the problem started for both of us in the middle of September. Let me know if you find any solutions as we have exactly the same problem.

Embed a video on file server in SharePoint

I have video file on file server, they are very large. I cannot upload those videos in SharePoint Library. Is it possible to embed videos on file server in SharePoint Media Web Part? If yes how can I do it?

That particular web part takes a number of formats and then displays them using Silverlight. I can't recall if it modifies the actual file or clones iot and then modifies that. The advantge to this is a lower footprint for SharePoint to deal
with. (Accepted formats for the web part are here).
What formats and file size are you working with too? You might have a few more options, such as: -
Re-encoding to a different format
Using a Content Editor Web Part and some HTML
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Need java code to select a folder from the Host server System

Hi All,
In my application For a button click i want to select a folder from host server .And copy an image into that selected path. Iam using tomcat 5.0. Can any one tell me how can i do this? Can any one provide sample code for this...
Thanks in Advance!!!

Dblr, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them. We need to know Windows version you have installed.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Progressive Flash Not playing properly from remote server

I have Flash CS3.
PROBLEM: I've encoded a video using Flash's CS3 "Progressive
Download" option and then uploaded the resulting video (along with
it's associated files created by Flash ie: .fla, .swf, script
folder with action script, etc.) to my server (webpage and video
was created through Dreamweaver CS3).
RESULT: A flash video that plays on the web, but has pink
colored digital boxes that breakup the picture... poor quality.
Please follow this link for an example:
http://rivhawk.tripod.com/index.html
I've watched multiple step-by-step tutorials by Adobe for
creating and uploading Flash video, both with Flash CS3 and even
Dreamweaver CS3. I've tested by creating the flash content in Flash
CS3 and directly through Dreamweaver. The same digital noise, pink
blocks occured.
NOTE: Before uploading the flash content and associated
files, I tested the flash video in my browser through Dreamweaver
(from my local directory, not remote server)...and it
plays/operates perfectly. It's only once it's uploaded that the
problem occurs.
I've encoded the video with Flash 8 and Flash 9 at low,
medium and high qualities...same results (even by different
computers accessing the content on the internet). It happens in
Firefox and Internet Explorer.
After 3 days of tests and research (and viewing samples of
other beautiful progressive download videos on the internet) I'm
wondering if I am missing something very simple, if there is a bug,
is this a known issue etc.
Please help, and please understand that I've been through all
the tutorials on creating/using Flash Video...and specifically
using the Progressive Download option for use on remote servers
that don't have the Flash Media Server.
Please assist.

> Hi, I am very new to the video thing. I created a Flash
swf that plays an
> flv
> file and everything works fine when I upload the swf and
the flv file to
> the
> same directory on our web server. We'd like other web
sites to be able to
> place
> this video on their site, but we do not want to give
them the actual
> files,
> rather have the video files pull from our server.
You can play video from any server by using a full URL ie
http://www.anotherdomain.com/flashvideo.flv
<param name="movie" value="videos/rep.swf" />
Looks like you're building an FLV player in Flash to play
your video rather
than embedding it using DW. If so you need to open the source
FLA you used
to generate 'rep.swf' and insert a full URL to your flv file,
then publish
the swf and upload again.
> I've tried changing the value and embed source tags to
be complete urls
> referencing the actual video location, but I still get
an error saying the
> flv
> file cannot be found. Is there a way to do what I'm
requesting?
As above, or you can just embed the video on a web page in
DW, using a full
URL to your flv. If your flvs are on a server and you are
connected to the
internet, you should be able to play the flv using preview in
browser before
uploading the page.

Problem in accessing the media files from another server

Currently I am working in a project with streaming video on demand and using FMS 4.5.
Let’s say the FMS is installed on one machine say ‘121.123.35.34’ and there is another server ‘100.54.88.222’ where all the media files belong. Now we need to point to this third server to play videos from FMS.I have done the below changes:
In the fms.ini file: set the VOD_DIR2 = \\100.54.88.222\myvideos
In the application.xml: Added the stream: <Streams>/hr;${VOD_DIR2}</Streams>
From my application accessing the path of flv as:source= “rtmp:// 121.123.35.34:1935/vod/hr/test” . Not able to access the video.
Note: If I will point to say ‘C:hrvideos’ in VOD_DIR2, then I am able to access the videos using the same URL.
I also tried mapping the shared path to the FMS machine and then given the mapped drive path in the VOD_DIR2, but this also doesn’t work.
Please let me know:
If we need to configure any other parameter to stream videos from another server.
VOD_COMMON_DIR: I modified this similar TO VOD_DIR to location 'C:hrvideos', I am able to stream the videos using rtmp, but not abl eto stream with http.
          Please let me know can we stream using http also as we need this to run f4m manifest file.
          http://121.123.35.34:8134/vod/hr/sample.mp4.
          http://121.123.35.34:8134/vod/hr/sample.f4m
Thanks,
Anjali

Hi Shiven,
I followed the steps suggested by you:
1) Changed the stream:
<Streams>/hr;${VOD_DIR2}</Streams> to<Streams>/;${VOD_DIR2}</Streams>
But not able to access the video with rtmp:// 121.123.35.34:1935/vod/test
2) For http streaming, changes the HttpStreamingContentPath in hds-vod in the httpd config file, and tried to stream the video like:
http:// 121.123.35.34:8134/vod/test.mp4 or
http:// 121.123.35.34:8134/hds-vod/test.mp4
But not able to load the video.
Please suggest?
Thanks & Regards,
Anjali Rawat

How do I embed videos in Muse CC?

Hi
I searched for the answer to this question and read that if I click 'Insert HTML', paste the link and click OK, the video should appear. However, every time I do this the application quits. I'm using a mac and I am trying to embed video from Vimeo.
What I'd really like to do is have several videos in a slide show format.
If anyone is able to give me some advice about why this might be happening / what I need to do, that would be great!
Many Thanks

CS as a marketing practice, its best to upload the videos to a secure website and embed links to the videos in the email.
If however embedding the video is the only way, attaching them to mail is perhaps the way you want to do it. Let me know if this helps.
- Hashim

Embed video from host server?

Similar Messages

Maybe you are looking for