Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router

Very much appreciate any help getting streaming video feed from web server built into video application to work properly using port forwarding on my Linksys WRT54g wireless router.
Here is the situation:
My PC is connected to the internet via a Linksys WRT54g wireless router.
The Windows XP Pro SP2 firewall is enabled, with a firewall exception established for the video camera application.
On the router, forwarding of port 80 is enabled for the LAN IP address of the PC running the video application with an embedded web server, and the web server in the video camera application is also set to use port 80.
I have a free DYNDNS account and also run the DYNDNS updater program on the PC running the video application with embedded web server. According to the DYNDNS web site and the DYNDNS updater program, the IP address assigned to the machine running the video application with embedded web server is set correctly in my dyndns account.
When I open a browser (Explorer or Firefox) on the PC running the video camera application with embedded web server, I am able to connect to the video application's web server by going to the dyndns address linked to the machine running the video application. The video application's web server is set to use the dyndns address. That's the good news. The bad news is that I can't connect to the video application's web server from any machine that connects to the internet that uses a router other than the router used by the PC running the video application. I am only able to connect to the streaming video from the application's web server only on machines that connect to the internet using the same (home) router used by the PC that is running the video application.
Since I am able to connect to the video app's embedded web server successfully on the machine running the video application, it seems that at least something about the current port forwarding settings is correct. For example, if I uncheck 'enable' for forwarding of port 80 on the router settings page, I am no longer able to connect to the video app's web server when I try to do so in a browser running on the machine running the video app. When I re-enable port 80 forwarding on the router, I am again able to connect to the web server of the video application on the machine running the video app. I thought that by enabling forwarding of port 80 on the router and associating that port with the LAN IP of the machine running the video application, it would be possible to connect to the streaming video of the video app's embedded web server from ANY machine connected to the internet, but that is not the case. There must be some other router settings to update/change in order to get the port forwarding working to enable a successful connection to the video web server, but I am stumped. Very grateful for any suggestions as to how to get this working properly.
Thanks in advance...

The firewall log can be configured on the third tab in the window for the firewall settings, where you can turn the firewall on and off completely.
From your tests, though, it does not seem to be the firewall. However, to be sure, it would be good to check the log. It will help to eliminate the firewall as the culprit and you may find it handy in the future, too. ;-) Just don't forget to turn the log off again after you are done because it may cause some performance penalty on your system while on.
From what you write, it seems as if I should give a little networking background on the ip addresses you'll see. Your setup is (or should be) a modem connected to the WAN/Internet port of the WRT. The computer is connected into a LAN port of the WRT.
Your router has two IP addresses (that's what makes it a router): a WAN address and a LAN address. The WAN address is the address assigned by the ISP. It is a normal internet IP address. Everyone is able to send packets to this IP address. The WAN address is the one reported by whatismyipaddress.com, it should be listed in the dyndns record and it is the address that your router shows on the Status page. It's the public IP address of your router. Dyndns maps your dyndns.org name to that IP address.
Your router also has an IP address on the LAN side. You can configure it to be whatever you want. The default is 192.168.1.1 with netmask 255.255.255.0 and it is better to leave it like that or at least inside the network 192.168.*.*. 192.168 is a special, reserved IP address range for private networks. Basically, routers in the internet are not supposed to forward addresses in this range. That makes them suitable for private LANs as the packets never can get anywhere. Most people using Linksys routers have there LAN in 192.168.1.*.
The router acts as gateway, which means it forwards packets from PCs in the LAN to the internet and back. As all your PCs in your LAN share a single WAN IP address, the gateway does address translation (NAT). This works only in one direction: from the inside to the outside. The router remembers when a PC in your LAN sends something out and accepts the responses in and sending them back to the PC. If something comes in from the internet which cannot be associated with a ongoing communication the packet is dropped unless you use port forwarding.
All computers in your LAN either have a static IP address assigned or use DHCP to get it automatically. The router has a DHCP server as well which gives out IP address from 192.168.1.100-149 if not changed. With a router with default settings static IP addresses can be in the range of 192.168.1.2-99 and 150-254.
ipconfig /all reports your IP address in your LAN, i.e. an address 192.168.1.*. The gateway in this output should be 192.168.1.1 which is your router. And packet no in the LAN address range 192.168.1.* is send to the router which forwards the packets into the internet.
An address 192.168.1.* should not appear as internet address in the Status page of the router nor should it appear at dyndns.
Port forwarding is used to operate a server in the LAN. By default, a server in the LAN cannot be reached from the internet. You have to configure port forwarding for this. You configure that traffic bound for a specific port (e.g. TCP port 80 for http) on your WAN IP address is forwarded to the same port on a specific LAN IP address. If your server runs on 192.168.1.50 than traffic to your WAN IP address port 80 is forwarded to 192.168.1.50 port 80. That way your HTTP server can be reached from the internet. As you can only configure a fixed IP address in port forwarding it is recommended that the server uses a static IP address and not DHCP as in the latter case the IP address may change over time...
O.K. so much for networking. I hope that makes things a little clearer and you can verify that your setup is how it is intended to be.
I suggest the following: on the router's security page there is an option to block WAN requests. Remove the check if it is set (meaning: do not block). After you did that change you should be able to ping your WAN address (e.g. ping xxxx.dyndns.org) from the internet. That way we know that it is on the correct address.
Also on the Administration page make sure that remote management is disabled (should be like that per default) or that the management port is NOT 80 but for example 8080. What is your your UPnP settings on the same page?
O.K. that should be enough for the moment...

Similar Messages

Embed streaming video from FlashMedia Server 2 in a Captivate Course

I am trying to add streaming video from FlashMedia Server 2
Developer Edition in a Captivate 3.0 course. The streaming server
is working fine and I can stream video from a Flash 8.0 file. The
problem seems to be in Captivate 3.0 because the video will not
display in a Captivate swf file. The html and swf file resides on
the web server therefore it cannot not be a security issue. When I
try to play the Captivate file; it does make connection to the
media server however the flv file will not stream. The Bytes
Out(Bytes to the client) number stops incrementing after a 1,000
bytes. Once you close the browser then the connection to the media
server is lost. However if I insert a .fla file from Flash
8.0(which will connect to the streaming server and play) and
publish it in the Captivate project; It will connect to the server
and playback the audio but not the video. I turned on and off
hardware acceleration on my video card thinking that was the
problem. I would appreciate any help on this. Once I get this to
work I can justify purchasing the full version of the Flash Media
Server.

I think this isn't really an InDesign issue at all. It sounds like an Acrobat issue.
First, you haven't said what version of Acrobat you're using. I'm assuming Acrobat X Pro?
I've used this with a friend's Flash Media Server so I know it works. What version of Flash server do you have installed?
I the link you provide I see a spaceband after the word "test" in the path. Could that be a problem?
Other than that, it appears that you're following the requirements listed in the Help file for Acrobat X Pro.
If you have further problems, you might post this on the Acrobat User Forum.

I need to stream video from itunes to apple tv with out using my 40gb hd.

i need to stream video from itunes to apple tv with out using my 40gb apple tv can it be done you see i have a 40gb apple tv and it's full and i still have lots more video (movies) in my itunes can i stream movies from itunes to apple tv with my memory full in apple tv??????????

Select the iTunes library on your computer from the Sources menu in Apple TV and then you can stream. If streaming is not smooth and your router has a multicast setting, try increasing the multicast bit rate. To return to the synced content on your Apple TV, select the Apple TV logo at the top of the Sources menu.

I need help importing video from my Sony digital 8 camcorder

Help !! I bought a new imac g5. When I try to import my video from my sony DCR-TRV460 it shows only a blue screen without sound. My camcorder is connected via firewire. I open iMovieHD, then connect my camcoder. I turn on my camcoder and set it to play/edit. iMovie starts controlling my camcorder (rewind, play, etc...) yet it onlys shows a blue screen when playing. It does the same if I use the import button. When it starts playing, sometimes it shows a scrambled digital image, then goes to blue screen. Can anyone tell me how I get my imovie and camcorder to work together? Thanks
imac g5 Mac OS X (10.4.3) tiger

Can anyone tell me how I get my imovie and camcorder to work together?
Yup! but you have to keep an open mind here...
First-if your camera can control the camera but not see the video,
*Open Garageband
*Play a note or two
*Close Garageband
*Open iMovie
The camera will work now-REALLY!!
If not, look here:
http://docs.info.apple.com/article.html?artnum=43000
Sue

Need Help Transfering Video From HV20 to Macbook Pro

I've lloked everywhere and I can't find the process to transfer my video from my HV20 to my Macbook Pro.
Can some one please point me in the right direction?
Thanks in advance.

Do you have the necessary firewire cable? USB will not capture your video to your Mac. With that, it's a simple matter of hooking the cam up to the Mac, with cam off, Mac on. Open iMovie and have your cam set on playback. Then turn on the cam and your Mac should present you with the import button.

Need help pulling data from an outside file into my array. Please help =)

Hi,
I need help adapting my array to read the interest rates from an outside file. Here is my code and the outside file I wrote. Please help. Oh, the array in question is on line 259, inside of my calculation() method.
Thanks...
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
     //declare gui components
     //declare labels
     JPanel contentPane = new JPanel();
     JPanel graphPane = new JPanel();
    JLabel instructionLabel = new JLabel();
    JLabel amountLabel = new JLabel();
     JLabel orLabel = new JLabel();
     JLabel comboBoxLabel = new JLabel();
     JLabel termLabel = new JLabel();
     JLabel rateLabel = new JLabel();
     JLabel calcLabel = new JLabel();
     JLabel paymentLabel = new JLabel();
     JLabel tableLabel = new JLabel();
     //declare font object
     Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
     //declare text fields
     JTextField amountField = new JTextField(20);
     JTextField termField = new JTextField(20);
     JTextField rateField = new JTextField(20);
     JTextField paymentField= new JTextField(20);
     //declare combo box for loan selection
     JComboBox comboBox = new JComboBox();
    //declare button group and radio buttons
    ButtonGroup buttonGroup = new ButtonGroup();
    JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
    JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
     //declare button objects
     JButton clearButton = new JButton();
    JButton calcButton = new JButton();
    JButton quitButton = new JButton();
     //declare text area for amortization
     JTextArea amortTextArea = new JTextArea();
     JTextArea testTextArea = new JTextArea();
     //declare scroll bar for amortization table
     JScrollPane scrollPane = new JScrollPane(amortTextArea,ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
     public Workshop5()
          instructionLabel.setText("Choose one of the following payment calculation options:");
          instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
          //adds both buttons to button group
          buttonGroup.add(enterRadioButton);
          buttonGroup.add(selectRadioButton);
          enterRadioButton.setFont(labelFont);
          enterRadioButton.setBackground(Color.WHITE);
          enterRadioButton.setContentAreaFilled(false);
         enterRadioButton.addActionListener(this); //adds action listener to enter radio button
          orLabel.setText("OR");
          orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
          selectRadioButton.setFont(labelFont);
          selectRadioButton.setBackground(Color.WHITE);
          selectRadioButton.setContentAreaFilled(false);
          selectRadioButton.addActionListener(this); //adds action listener to select radio button
          amountLabel.setText("Enter mortgage amount");
          amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
          amountField.requestFocusInWindow();
          termLabel.setText("Enter term length in years:");
          termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
          rateLabel.setText("Enter interest rate:");
         rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
            comboBoxLabel.setText("Select a loan:");
         comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
         comboBox.setBackground(new Color(255,255,255));
         comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
         comboBox.setEnabled(false);
         ComboBox();
          calcLabel.setText("Press Calculate button to determine monthly payment.");
         calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
         calcButton.setText("Calculate");
         calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
         calcButton.addActionListener(this);
            //define monthly payment label
         paymentLabel.setText("Monthly payment:");
         paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
         //define monthly payment text field
         paymentField.setFont(new Font("Tahoma", Font.BOLD,16));
         paymentField.setBackground(new Color(255,255,255));
         paymentField.setEditable(false);
          //define clear button
          clearButton.setText("Clear");
          clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
          clearButton.addActionListener(this);
          //define quit button
          quitButton.setText("Quit");
          quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
          quitButton.addActionListener(this);
          tableLabel.setText("Amoritization Table");
          tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
          graphPane.setBackground(Color.WHITE);
          //add components to content
          getContentPane().add(contentPane);
          contentPane.setLayout(null);
          addComponent(contentPane, instructionLabel, 80,10,450,26);
          addComponent(contentPane, enterRadioButton, 30,40,220,30);
          addComponent(contentPane, orLabel, 280,40,100,30);
          addComponent(contentPane, selectRadioButton, 335,40,350,30);
          addComponent(contentPane, amountLabel, 100,80,220,26);
          addComponent(contentPane, amountField, 300,80,150,26);
          addComponent(contentPane, termLabel, 15,125,200,30);
          addComponent(contentPane, termField, 195,125,125,30);
          addComponent(contentPane, rateLabel, 62,160,200,30);
          addComponent(contentPane, rateField, 195,165,125,30);
          addComponent(contentPane, comboBoxLabel, 400,125,200,26);
          addComponent(contentPane, comboBox, 400,155,150,30);
          addComponent(contentPane, calcLabel, 100,200,400,30);
          addComponent(contentPane, calcButton, 250,240,100,30);
          addComponent(contentPane, paymentLabel, 150,285,200,30);
          addComponent(contentPane, paymentField, 300,285,100,30);
          addComponent(contentPane, clearButton, 100,330,100,30);
          addComponent(contentPane, quitButton, 400,330,100,30);
          addComponent(contentPane, tableLabel, 200,370,300,26);
          addComponent(contentPane, scrollPane, 10,400,450,360);
          addComponent(contentPane, graphPane, 475,400,305,360);
          //add window listener to close window when user presses X
          addWindowListener(new WindowAdapter()
               public void windowClosing(WindowEvent e)
                    System.exit(0);
         pack();
     //method to add components
     private void addComponent(Container container, Component c, int x, int y, int width, int height)
          c.setBounds(x, y, width, height);
          container.add(c);
     //action performed method
     public void actionPerformed(ActionEvent event)
          Object source = event.getSource();
          if (source == calcButton)
               Calculate();
          if (source == clearButton)
               Clear();
          if (source == quitButton)
               Exit();
          //defines active area based on user selection of mortgage calculation method
           //if user chooses to enter the mortgage manually, combo box fields are inactive
           if (source == enterRadioButton)
                comboBox.setEnabled(false);
                termField.setEnabled(true);
             termField.setEditable(true);
             rateField.setEnabled(true);
             rateField.setEditable(true);
             amountField.setText("");
               amountField.requestFocusInWindow();
               termField.setText("");
              rateField.setText("");
              paymentField.setText("");
              amortTextArea.setText("");
          //if user chooses to select from a preset mortgage, rate and term fields are inactive
          if (source == selectRadioButton)
               comboBox.setEnabled(true);
               termField.setEnabled(false);
               termField.setEditable(false);
               rateField.setEnabled(false);
               rateField.setEditable(false);
               amountField.setText("");
               amountField.requestFocusInWindow();
               termField.setText("");
               rateField.setText("");
               paymentField.setText("");
               amortTextArea.setText("");
     }//end of action performed method
     //combo box method
      public void ComboBox()
           String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
           for (int i = 0; i < LoanArray.length; i++)
                comboBox.addItem(LoanArray);
     }//end combo box method
     //calculation method
     void Calculate()
          //resets fields
          paymentField.setText("");
     amortTextArea.setText("");
          //calculation variables
     NumberFormat currency = NumberFormat.getCurrencyInstance();
          int [] termArray = {7, 15, 30};                               //array of years
               double [] yearlyInterestArray = {5.35, 5.5, 5.75};           //array of interest
               int totalMonths = 0;                                    //total months
               double Loan = 0.0;                               //amount of loan
               double MonthlyInterest = 0.0;                               //monthly interest rate
               double Payment = 0.0;                               //calculate payment
               double monthlyPayment = 0.0;                                   //calculate monthly payment
               double Interest = 0.0;                                              //variable for Interest Array input
               int Term = 0;                                              //variable for Term Array input
               double NewMonthlyInterest = 0.0;                               //new interest amount
               double NewLoan = 0.0;                               //new loan amount
               double Reduction = 0.0;                               //principle reduction
               //validate input
               try
                    Loan = Double.parseDouble(amountField.getText());
               catch (NumberFormatException e)
                    JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
               //resets input fields after error message
          amountField.setText("");
          amountField.requestFocusInWindow();
               //if select button is chosen
          if (selectRadioButton.isSelected())
               int index = comboBox.getSelectedIndex();
               Term = termArray[index];
               Interest = yearlyInterestArray[index];
          //if user chooses to enter mortgage information
          else
               if (enterRadioButton.isSelected())
                    //validates input
          try
          Term = Integer.parseInt(termField.getText());
          catch (NumberFormatException e)
               JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
               //clears fields after error message
               termField.setText("");
               termField.requestFocusInWindow();
          try
               Interest = Double.parseDouble(rateField.getText());
          catch (NumberFormatException e)
               JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
          //clears fields after error message
          rateField.setText("");
                         rateField.requestFocusInWindow();
               //perform calculations
               if (Loan > 0)
                    Loan = Double.parseDouble(amountField.getText());
                    MonthlyInterest = (Interest / 12)/100;
                    totalMonths = Term * 12;
                    monthlyPayment = Loan * MonthlyInterest *(Math.pow((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
          paymentField.setText("" + currency.format(monthlyPayment));
                    //send information to amortization text area
               amortTextArea.append("Number\t");
               amortTextArea.append(" Amount\t");
               amortTextArea.append("Interest\t");
               amortTextArea.append("Principle\t");
               amortTextArea.append("Balance\n");
          NewLoan = Loan;
                    for (int i = 1; i <= totalMonths; i++)
                         NewMonthlyInterest = MonthlyInterest * NewLoan;
                         Reduction = monthlyPayment - NewMonthlyInterest;
                         NewLoan = NewLoan - Reduction;
                         amortTextArea.append(" " + i +"\t");
                         amortTextArea.append(" " + currency.format(monthlyPayment) + "\t");
                         amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
                         amortTextArea.append(" " + currency.format(Reduction) + "\t");
                         amortTextArea.append(" " + currency.format(NewLoan) + "\n");
                    //resets fields if loan amount is less than zero
                    if((Loan <= 0 || Term <= 0 || Interest <= 0))
                         paymentField.setText("");
                         amortTextArea.setText("");
     }//end calcualtion method
     //clear method
     void Clear()
          amountField.setText("");
          amountField.requestFocusInWindow();
          termField.setText("");
          rateField.setText("");
          paymentField.setText("");
          amortTextArea.setText("");
     }//end of clear method
     //main method
     public static void main(String args[])
          Workshop5 f = new Workshop5();
          f.setTitle("Carol's Mortgage Calculator");
          f.setBounds(200,100,800,800);
          f.setResizable(false);
          f.setVisible(true);
     }//end of main method
     //exit method
     void Exit()
          System.exit(0);
     }//end of exit method
}//program end
My data file is called: "InterestData.dat" and only contains the following text:
5.35, 5.5, 5.75

Ok, now I am getting this error message:
cannot resolve symbol method lenght()
Please help me out here, this is due tomorrow and I've been killing myself on it...
attaching program with revised code included, see beginning of calculation method line 250:
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.* ;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
     //declare gui components
    //declare labels
    JPanel contentPane = new JPanel();
     JPanel graphPane = new JPanel();
     JLabel instructionLabel = new JLabel();
        JLabel amountLabel = new JLabel();
    JLabel orLabel = new JLabel();
    JLabel comboBoxLabel = new JLabel();
    JLabel termLabel = new JLabel();
    JLabel rateLabel = new JLabel();
    JLabel calcLabel = new JLabel();
    JLabel paymentLabel = new JLabel();
    JLabel tableLabel = new JLabel();
    //declare font object
    Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
    //declare text fields
    JTextField amountField = new JTextField(20);
    JTextField termField = new JTextField(20);
    JTextField rateField = new JTextField(20);
    JTextField paymentField= new JTextField(20);
    //declare combo box for loan selection
    JComboBox comboBox = new JComboBox();
        //declare button group and radio buttons
        ButtonGroup buttonGroup = new ButtonGroup();
        JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
        JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
    //declare button objects
    JButton clearButton = new JButton();
        JButton calcButton = new JButton();
        JButton quitButton = new JButton();
    //declare text area for amortization
    JTextArea amortTextArea = new JTextArea();
    JTextArea testTextArea = new JTextArea();
    //declare scroll bar for amortization table
    JScrollPane scrollPane = new JScrollPane(amortTextArea, ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
     public Workshop5()
         instructionLabel.setText("Choose one of the following payment calculation options:");
        instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
        //adds both buttons to button group
        buttonGroup.add(enterRadioButton);
        buttonGroup.add (selectRadioButton);
        enterRadioButton.setFont(labelFont);
        enterRadioButton.setBackground(Color.WHITE);
        enterRadioButton.setContentAreaFilled(false);
        enterRadioButton.addActionListener(this); //adds action listener to enter radio button
        orLabel.setText("OR");
        orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
        selectRadioButton.setFont(labelFont);
        selectRadioButton.setBackground(Color.WHITE);
        selectRadioButton.setContentAreaFilled(false);
        selectRadioButton.addActionListener (this); //adds action listener to select radio button
          amountLabel.setText("Enter mortgage amount");
        amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
        amountField.requestFocusInWindow();
        termLabel.setText("Enter term length in years:");
        termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        rateLabel.setText("Enter interest rate:");
        rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        comboBoxLabel.setText("Select a loan:");
        comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        comboBox.setBackground(new Color(255,255,255));
        comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
        comboBox.setEnabled(false);
        ComboBox();
        calcLabel.setText("Press Calculate button to determine monthly payment.");
        calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
        calcButton.setText("Calculate");
        calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
        calcButton.setBackground(new Color(202,255,112));
        calcButton.addActionListener(this);
        //define monthly payment label
        paymentLabel.setText("Monthly payment:");
        paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
        //define monthly payment text field
        paymentField.setFont (new Font("Tahoma", Font.BOLD,16));
        paymentField.setBackground(new Color(255,255,255));
        paymentField.setEditable(false);
          //define clear button
        clearButton.setText("Clear");
        clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
        clearButton.setBackground(new Color(202,255,112));
        clearButton.addActionListener(this);
        //define quit button
        quitButton.setText("Quit");
        quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
        quitButton.setBackground(new Color(202,255,112));
        quitButton.addActionListener(this);
          //define label for amortization table
        tableLabel.setText ("Amoritization Table");
          tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
        graphPane.setBackground(Color.WHITE);
        //add components to content
        getContentPane().add(contentPane);
        contentPane.setLayout(null);
          addComponent(contentPane, instructionLabel, 80,10,450,26);
        addComponent(contentPane, enterRadioButton, 30,40,220,30);
        addComponent(contentPane, orLabel, 280,40,100,30);
        addComponent(contentPane, selectRadioButton, 335,40,350,30);
        addComponent(contentPane, amountLabel, 100,80,220,26);
        addComponent(contentPane, amountField, 300,80,150,26);
        addComponent(contentPane, termLabel, 15,125,200,30);
        addComponent(contentPane, termField, 195,125,125,30);
        addComponent(contentPane, rateLabel, 62,160,200,30);
        addComponent(contentPane, rateField, 195,165,125,30);
        addComponent(contentPane, comboBoxLabel, 400,125,200,26);
        addComponent(contentPane, comboBox, 400,155,150,30);
        addComponent(contentPane, calcLabel, 100,200,400,30);
        addComponent(contentPane, calcButton, 250,240,100,30);
        addComponent(contentPane, paymentLabel, 150,285,200,30);
        addComponent(contentPane, paymentField, 300,285,100,30);
        addComponent(contentPane, clearButton, 100,330,100,30);
        addComponent(contentPane, quitButton, 400,330,100,30);
        addComponent(contentPane, tableLabel, 200,370,300,26);
        addComponent(contentPane, scrollPane, 10,400,450,360);
        addComponent(contentPane, graphPane, 475,400,305,360);
        //add window listener to close window when user presses X
        addWindowListener(new WindowAdapter()
             public void windowClosing(WindowEvent e)
                  System.exit(0);
        pack();
       //method to add components
       private void addComponent(Container container, Component c, int x, int y, int width, int height)
               c.setBounds(x, y, width, height);
               container.add(c);
       //action performed method
       public void actionPerformed(ActionEvent event)
               Object source = event.getSource();
               if (source == calcButton)
                       Calculate();
               if (source == clearButton)
                       Clear();
               if (source == quitButton)
                       Exit();
               //defines active area based on user selection of mortgage calculation method
               //if user chooses to enter the mortgage manually, combo box fields are inactive
               if (source == enterRadioButton)
                       comboBox.setEnabled(false);
                       termField.setEnabled(true);
               termField.setEditable(true);
               rateField.setEnabled(true);
               rateField.setEditable(true);
               amountField.setText ("");
                       amountField.requestFocusInWindow();
                       termField.setText("");
                   rateField.setText("");
                   paymentField.setText ("");
                   amortTextArea.setText("");
               //if user chooses to select from a preset mortgage, rate and term fields are inactive
               if (source == selectRadioButton)
                       comboBox.setEnabled(true);
                       termField.setEnabled(false);
                       termField.setEditable(false);
                       rateField.setEnabled (false);
                       rateField.setEditable(false);
                       amountField.setText("");
                       amountField.requestFocusInWindow();
                       termField.setText ("");
                       rateField.setText("");
                       paymentField.setText("");
                       amortTextArea.setText("");
       }//end of action performed method
       //combo box method
        public void ComboBox()
               String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
               for (int i = 0; i < LoanArray.length; i++)
                       comboBox.addItem(LoanArray);
}//end combo box method
//calculation method
     void Calculate()
          //resets fields
          paymentField.setText("");
          amortTextArea.setText("");
          //calculation variables
          NumberFormat currency = NumberFormat.getCurrencyInstance();
          //declare input stream object
          InputStream istream;
          //create a file object to refer to the outside file
          File interestData = new File("InterestFile.dat");
          //assign instream to the new file object
          istream = new FileInputStream(interestData);
          try
               StringBuffer sb = new StringBuffer();
               BufferedReader in = new BufferedReader(new FileReader(interestData));
               String line = "";
               while((line = in.readLine()) != null)
                    sb.append(line);
               in.close();
               String fileData = sb.toString();
               String[] splitData = fileData.split(", ");
               double [] yearlyInterestArray = new double[splitData.length()];
               for(int j = 0; j < splitData.length(); j++)
                    yearlyInterestArray[j] = new Double(splitData[j]).doubleValue();
          catch (IOException e)
               JOptionPane.showMessageDialog(null, "File does not exist." + e.getMessage());
          int [] termArray = {7, 15, 30}; //array of years
          double [] yearlyInterestArray = { 5.35, 5.5, 5.75}; //array of interest
          int totalMonths = 0; //total months
          double Loan = 0.0; //amount of loan
          double MonthlyInterest = 0.0; //monthly interest rate
          double Payment = 0.0; //calculate payment
double monthlyPayment = 0.0; //calculate monthly payment
double Interest = 0.0; //variable for Interest Array input
int Term = 0; //variable for Term Array input
double NewMonthlyInterest = 0.0; //new interest amount
double NewLoan = 0.0; //new loan amount
double Reduction = 0.0; //principle reduction
//validate input
try
     Loan = Double.parseDouble(amountField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
//resets input fields after error message
amountField.setText("");
amountField.requestFocusInWindow ();
          //if select button is chosen
          if (selectRadioButton.isSelected())
               int index = comboBox.getSelectedIndex ();
               Term = termArray[index];
               Interest = yearlyInterestArray[index];
          //if user chooses to enter mortgage information
          else
               if (enterRadioButton.isSelected())
          //validates input
          try
               Term = Integer.parseInt(termField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
     //clears fields after error message
     termField.setText("");
     termField.requestFocusInWindow();
try
     Interest = Double.parseDouble(rateField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
     //clears fields after error message
     rateField.setText("");
     rateField.requestFocusInWindow();
          //perform calculations
          if (Loan > 0)
               Loan = Double.parseDouble(amountField.getText ());
               MonthlyInterest = (Interest / 12)/100;
               totalMonths = Term * 12;
               monthlyPayment = Loan * MonthlyInterest *(Math.pow ((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
paymentField.setText("" + currency.format(monthlyPayment));
//send information to amortization text area
amortTextArea.append("Number\t");
amortTextArea.append(" Amount\t");
amortTextArea.append("Interest\t");
amortTextArea.append("Principle\t");
amortTextArea.append("Balance\n");
               NewLoan = Loan;
               for (int i = 1; i <= totalMonths; i++)
     NewMonthlyInterest = MonthlyInterest * NewLoan;
     Reduction = monthlyPayment - NewMonthlyInterest;
     NewLoan = NewLoan - Reduction;
     amortTextArea.append(" " + i +"\t");
     amortTextArea.append (" " + currency.format(monthlyPayment) + "\t");
     amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
     amortTextArea.append(" " + currency.format(Reduction) + "\t");
     amortTextArea.append(" " + currency.format(NewLoan) + "\n");
//resets fields if loan amount is less than zero
if((Loan <= 0 || Term <= 0 || Interest <= 0))
     paymentField.setText("");
     amortTextArea.setText("");
     }//end calcualtion method
//clear method
void Clear()
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
}//end of clear method
//main method
public static void main(String args[])
Workshop5 f = new Workshop5();
f.setTitle("Carol's Mortgage Calculator");
f.setBounds(200,100,800,800);
f.setResizable(false);
f.setVisible(true);
}//end of main method
//exit method
void Exit()
System.exit(0);
}//end of exit method
}//program end

Need help with convertor from cd-r VCD into dvd format compatibility

my sister got married at India, the video was burned in cd-r as in VCD and it will play in USA DVD PLAYER but however it wont play on powerbook or any laptop. How do I convert the setting and make it enable to view on laptop or IMovie or IDVD.
Thanks!

Well, you could try doing a crc check of the cd using crc.exe. It's been of great use to me recently.
open up a command window, switch to the directory where you've extracted crc.exe and run (change x to your cd/dvd drive letter):
crc x:

Need help importing session from Korg Triton Extreme into logic

I am trying to import a full midi session that was sequenced on my Triton into Logic Pro9. The problem I'm having is that when I record in, all 16 midi channels are sending to one Logic midi track. Is there a way to import the full midi session into logic so I can edit the session in logic on the 16 individual tracks? Any help would be great!

I think the triton can save standard midi files. Importing that file into logic would be the best and cleanest solution.
Cheers,
Jazz

Streaming Video From Android to Adobe Media Server

Hello All -
i am looking for the best advice on how to live stream videos from Android Phone (3.0+)to Adobe Media Server.
Thanks,

hi,
yes you can do that but for that you need to write your own server side module for handling streams and storing them

Can't stream video from the web

My iPad cannot stream videos from Safari web sites except when I am in the same room as the modem and router. I am not talking about flash, I mean videos it should be able to stream.
I use an Arris modem from Comcast with a Time Machine in the same room. I have an Airport Express in another room to extend wireless coverage.
If I start a video in the "time machine room" it will load and I can then leave and the video will play. If I try to start it in another room it will not load properly.
I tried a test, streaming the same video to my iBook, my iPhone and my iPad - from a non "time machine room" in my house. No problem with the iBook or iPhone. The video played with no problems. No go with the iPad.
Does anyone have any ideas why this is happening? I am getting a strong Wi Fi signal.
Deanna

HI Deanna,
Try resetting the network settings on your iPad.
Tap Settings / General / Reset / Reset Network Settings.
That will restore to factory default.
Restart your iPad, restart your Mac.
If that doesn't help, try changing the Airport channel.
Select the device you’re setting up on the left and then click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose a new channel from the Channel pop-up menu.
If that doesn't help, go to /Library/Preferences. Move all the files in the System Configuration folder to the Trash, and restart your Mac.
Try streaming again.
If I try to start it in another room it will not load properly.
Also, check out the Airport Express online manual *page 41* for: *Items that can cause interference*
http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf
Carolyn

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps Internet

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watchi

When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watching the video I have to re-buffer the video. Is there any way I can stop the Apple TV from reverting back to the home screen when I pause the video I’m watching?

Welcome to the Apple Community.
Contact the developer of the Air Video app.

MPMovieplayer for stream video from server

Hello all,
I want to stream video from server.So for that i am using mpmovieplayer.but its not load the video from server. I am try with http://km.support.apple.com/library/APPLE/APPLECAREALLGEOS/HT1211/sampleiTunes.mov but its not load in mpmovieplayer.
Thank you...
Message was edited by: diyora

Hello all,
I am now able to load video from server successfully.Now i want to play this video recursively so for that i am used MPMoviePlayerPlaybackDidFinishNotification notification & again play my movieplayer. But its work in sdk 3.2 only. When i switch to sdk 4.2 then stop the video playing recursively.
Thank you...

Please help me to unable my ipad2 to play stream video from rtr planeta

Please help me to unable my ipad2 to play stream video from rtr planeta . Thank you!

I have no idea what rtr planeta is but if it uses Flash, it won't work very well or at all on an iOS device. If it is Flash, try the Skyfire browser... it is supposed to run some Flash sites. Review it carefully before purchase.

What extension is needed to enable video from the Cleveland Browns web site?

What extension is needed to enable video from the Cleveland Browns web site? Video and movies play everywhere on the iMac OS 10.9.2 and my Safari 7.0.2 browser except on Cleve.Browns site. I had it working earlier but after a crash I must have made some changes and video is no longer available on that site?

Thank you for the suggestion but my Safari uses 12.0.077 Flash PLayer and the video on the Browns' site still does not respond. Works OK on FireFox but not at all on Safari.

Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router

Similar Messages

Maybe you are looking for