Client ABAP proxy error handling. Please help!

Hi Experts,
   I have following scenario:
   SAP ECC (ABAP Client Proxy) -> PI(XI)-->(SOAP) Third party web service System
   This is Asynchronous.
   What will happen when ABAP client Proxy in ECC sends data to PI but PI is down?
   Will the message be queued in ECC? Can the queued message be processed automatically when PI is UP later?
   Please help.
Thanks & Regards
Gopal

Hello Gopal,
Correct, it should be an automatic entry into the queue!
refer below for a detailed understanding!
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies     XI: Reliable Messaging u2013 EOIO in ABAP Proxies
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy     Monitoring for Processed XML messages in ABAP Proxy
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]     Weblog to send Response from RFC to File in Asyn Mode Using Proxy
/people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method     PI/XI: ABAP Proxies say goodbye to Execute_Asynchronous method
/people/krishnakumar.ramamoorthy3/blog/2008/11/02/error-handling-framework-for-abap-proxies--part-1     Error handling framework for ABAP proxies - Part 1
/people/krishnakumar.ramamoorthy3/blog/2008/12/19/error-handling-framework-for-abap-proxies--part-2     Error handling framework for ABAP proxies - Part 2
Regards,
Jilan

Similar Messages

ABAP Proxy creation doubt - Pls Help

Hi Friends ,
 I have referred the following blog for abap proxy creation
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
 as per the previous replies , we have to generate proxiy from R3 syetm . But in this weblog they are generating from XI server ?
 The have doubt in the following passges
1.
We use two clients of XI here. Client 100 acts as XI server .Client 105 acts as a client ABAP proxy which sends employee information as a message to XI which routes the info to a file. Logical flow is depicted as shown below. Note that conversion of sending system format to XI specific format is not done at the outbound side of the XI server.

 a. i have webAS 6.40 . i have R3 6 . So i can generate proxy from R3 it self right ? then how to procedd further .
 b. So Proxy and report to call proxy also from R3 SIDE ?
 c. If No sender agreement required then in IR only receiver determination and receiver agreement is enough ?
 d. Then in receiver Detrmination , do i need to give Business system as sender service ?
 
 can u please explain this a little bit more ?
Regards.,
Shyam

Hi Shyam,
we have to generate proxiy from R3 syetm . But in this weblog they are generating from XI server ?
 In this blog, Ravi has taken two different clients in the same system. As the abap code is client independent so it can be generated anywhere irrespective of clients. But while executing the report we cannot do it from the same client as of the IS.So we need to trigger the report from the client 105 which is considered as the client proxy.
check Triggering ABAP PROXY in the blog.
c. If No sender agreement required then in IR only receiver determination and receiver agreement is enough ?
 Yes.
d. Then in receiver Detrmination , do i need to give Business system as sender service ?
You can create business system for the R/3 and use it in RD.But the business system dont have any sender communication channel and no need of sender agreement as the data will directly hit the IE of XI.
Regards,
Prasanthi.

7.1 Client ABAP proxy code sample (outbound)

Hi guys,
has somebody implemented new 7.0(7.1) abap proxies using ws runtime?
Could you please post some sample code of client abap proxy?
The 3. proxies were quite easy, but I'm a little bit confused in 7.0 and it's ws-rm.
Thanks a lot, Olian

Create a client proxy (for eg. the name would be like ZCO_MI_EMP_OUT_SYNC).
Create a report program for the client proxy.
report yh_proxyclient.
* tables: ZEMP_DTLS_COPY.
   data: input type zmt_emp_tar1 .
   data: output type zmt_emp_src1 .
   data: client type ref to zco_mi_emp_out_sync .
output-mt_emp_src-dept_id = 'SAP EP'.
data wa_emp type zdt_emp_tar_employee.
data wa_empinsert type zemp_dtls_copy. "ZDT_EMP_TAR_EMPLOYEE.
try.
    create object client
* EXPORTING
*    logical_port_name =
catch cx_ai_system_fault .
endtry.
try.
call method client->execute_synchronous
exporting
    output = output
importing
    input = input
catch cx_ai_system_fault .
catch cx_ai_application_fault .
endtry.
loop at input-mt_emp_tar-employee into wa_emp.
write: / wa_emp-emp_id, wa_emp-dept_id, wa_emp-emp_name, wa_emp-emp_address.
endloop.
commit work.
endmethod
the above code is taken fron this wiki (step by step guide using an example)
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/abapClientProxytoABAPServerProxy+Scenario]

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

It says "error 7, windows error 127" Please help

It says "error 7, windows error 127" Please help

I tried that, got this error:
An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
Please help!

Can't install Adobe Flash player ERROR. Please help

I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
Please help me I am really happy if someone here can help me.

Hello,
The log file indicates there are permissions issues on a couple of files and they are not being removed. This is preventing the installation of the new version. Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller. Please only run the uninstaller and do not attempt to re-install at this time.
Thank you.
Maria

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

Error 1001 - please Help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

My iPod is jailbroken and does not work. It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help

It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help me!

Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

What is package structure for Client ABAP Proxy?

1. What is the package structure need to be followed for creating abap client proxy.
2. I read some where in the form, it need to be 4 levels. Why is it?
Thank you
Ganges Leaves

Hi
U hav to create a 4 level package structure for client ABAP proxy.
U can create ur on packages
1st level-structure package.
2nd level-main package.
3rd and 4th level-sub packages.
To the 4th level only u hav to create proxy.
The classes and code wil be automatically generated at the time of proxy creation.
I think the 4 level structure bcz while in r/3 everythin in integration builder like software component version and all wil be takin as different levels.
Also u can go through the weblogs in the above replies u got.
Regards
Victoria.

Sample Client ABAP Proxy Program - PI 7.1

I created Proxy. I need to call in a Report Program. I am using PI 7.1
Can anyone send me a sample Client ABAP Proxy program to use with PI 7.1

Hi,
>>>Can anyone send me a sample Client ABAP Proxy program to use with PI 7.1
it's exactly the same as for 7.0 and there are blogs that show such sample reports on SDN
just do a little search and I'm sure you can find it
Regards,
Michal Krawczyk

Dynamic Configuration from Client ABAP Proxy

Hello Experts,
Is it possible somehow to set Dynamic Configuration values to Message Header when calling Client ABAP Proxy from SAP system?
Best Regards

I managed to get the dynamic header configuration at least with inbound proxies:
    DATA:
        server_context TYPE REF TO if_ws_server_context,
        proxy_framework TYPE REF TO if_proxy_framework,
        internal_protocol TYPE REF TO if_wsprotocol_internal,
        lo_inb_pxy TYPE REF TO cl_xms_inbound_proxy_plsrv,
        lo_dyn_header TYPE REF TO if_xms_msghdr30_dynamic.
      server_context = cl_proxy_access=>get_server_context( ).
      internal_protocol ?= server_context->get_protocol( 'INTERNAL' ).
      lo_inb_pxy ?= internal_protocol->get_framework( ).
      lo_dyn_header ?= lo_inb_pxy->xmb_message->get_dynamic_header( ).

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

Client ABAP proxy error handling. Please help!

Similar Messages

Maybe you are looking for