Embedding in HTML

I want to upload some h.264 QT files and use code to make them appear to be embedded in a .html page like you see done with Flash video and like Apple does on their site. What is the code to do this?
Thanks!

You can read this from Apple's web site on how to embed videos in an html:
http://developer.apple.com/documentation/QuickTime/Conceptual/QTScriptingHTML/QTScripting_HTML_AIntroduction/chapter_1_section1.html
You can use this free program that will write the code for you, Pageot:
http://www.qtbridge.com/pageot/pageot.html

Similar Messages

I embedded some HTML code into adobe Muse but not displaying when the pages are Exporting to HTML

I embedded some HTML code into adobe Muse and when I published the remote site on business catalyst the (Add This widget) HTML code shows up but when I exported the site to HTML pages and view the index page in the browser (Safari, Chrome, Firefox) the (Add this widget) HTML code wouldn't display on any of the pages. I've used this code before on other Muse sites not sure what could have happened. Thnx!!!

Hi,
Please take a look at this post for a similar discussion : Re: When i export my muse website my youtube video links stop working. Why is this?
Regards,
Aish

Problems embedding in HTML an Applet that uses jdbc connection

Dear Everyone,
I'm having some problems deploying an applet that loads image paths from a mysql database. I manage to run the applet in appletviewer through netbeans but can't get to run it embedded in HTML code. The error I get from the java console is:
load: class imagedisplay/MainApplet.class not found.
java.lang.ClassNotFoundException: imagedisplay.MainApplet.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: E:\My Documents\NetBeansProjects\imagedisplay\src\imagedisplay\MainApplet\class.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: imagedisplay.MainApplet.class...where MainApplet.class is the applet class file. I surely don't know what class.class is but I suspect that it might be related to the mysql jdbc driver as I'm totally clueless about where to put it.
In all I have MainApplet.class (applet) and DoubleBufferApplet.class (applet related), Data.class and ImagePaths.class (to load data from the database) and the mysql jdbc driver jar file. DoubleBufferApplet, Data and ImagePaths are in a package called imagedisplay.
The HTML is as follows
<HTML>
<HEAD>
   <TITLE>Applet HTML Page</TITLE>
</HEAD>
<BODY>
<applet code="MainApplet.class" width="500" height="140">
</applet>
</BODY>
</HTML>Help is much appreciated.
Regards,
William.

Hello Everyone,
I sorted it out by a series of changes to the file structure, packages and HTML code. I still can't get it to work, but I'll start another thread for that
Regards,
William.

Mov WAIT to start if embedded in HTML

Hi all,
I've a large mov (about 250MB) embedded in a HTML page and delivered on CD-ROM.
I don't know why if I start the mov from the Quicktime Player (double clic on the mov file) the mov starts fast, but If I navigate to the html page that embed the mov, the movie starts after many seconds (almost 20 seconds).
This happens the first time I run the mov and on Internet Explorer (in Firefox it seems ok). I don't know on MAC.
It seems that the mov starts when it's been fully read by the player, I've thought it could be for OBJECT or EMBED TAGS, but I've not found info about this problem... I've tried to use "qtsrcdontusebrowser" tag, but I've no success.
Is there someone who knows why there's this difference of performance between the QT stand alone player and the Browser plugin?
How can I solve it?
Thanks in advance
Federico

Thanks
but as I've written I don't publish that on web but on CD-Rom.
I don't know why in Quicktime Player the movie starts fast but in the QT Browser Plugin it requires so much more time, even if both read from the same CD-Rom.
Maybe Quicktime Player and Quicktime Browser Plugin play mov in different ways, so at the moment I've used the "target Quicktimeplayer" TAG to run the Player and avoid the problem, even if I'm looking for a better solution to start it into the HTML page.
Still waiting for hints
Thanks
Fede

How to Save Completed PDF Form (Embedded in HTML)

We have a PDF Form which is displayed embedded in our HTML page (via a browser plugin).
The user can submit the Form from within the HTML page (the embedded frame with the PDF contains the whole form and the Submit button).
The toolbar on the Reader plugin shows the Save button, but when we click it, we get an error saying the document cannot be saved, only printed. Here is our issue:
1) We need to allow the user to save the form locally,
2) including their *completed data*
Is there any way to do this from within the plugin? Thanks

Only specially enabled forms can be saved with data in Reader. If you have Acrobat Standard or Pro you can save data in forms. Forms can only be enabled for saving with Reader using Acrobat or LiveCycle Reader Extensions.

Embedding inline HTML data in XML using the mx:XML tag with < and >

What is best practice for embedding HTML within the
<mx:XML> tag? Programmatically, I can implement this
successfully:
[Bindable]
public var xmlDP:XML = <component data="<" />;
However, I get the following error if I try to store the same
data inline in an mx:XML tag, as such:
<mx:XML id="xmlDP">
<component data="<" />
</mx:XML>
Error #1095: XML parser failure: Unterminated attribute.
If I change the MXML tag as follows, it works fine:
<mx:XML id="xmlDP">
<component data="&lt;" />
</mx:XML>
Unfortunately, I also can not source the mx:XML tag to an XML
file which uses < or > codes, as it yields the same
results. This leads me to believe that the <mx:XML> tag does
not support the special character codes for < and >, but why?
Incidentally, this code also gives a 1095 error:
<mx:XML id="xmlDP">
<component data="<" />
</mx:XML>
This is causing an issue with my source data as it is not
hand typed into Flex, and standard XML supports the < and
> codes. I have tried a full HTML string, as shown below,
but this also generates the error:
<mx:XML id="xmlDP">
<component data="<b>Test</b>"
/>
</mx:XML>
Many thanks for any input you may have!

I’m generating the XML source file with
Microsoft’s XML Notepad 2007. It will encode invalid special
characters automatically. My understanding is that this is the
proper way to handle the less than symbol in a XML string, that is
to say using the < code.
With respect to the escape and un-escape methods, I am able
to successfully implement these in AS, but not in MXML. This makes
sense considering they are AS methods, but I was hoping to be able
to do something like:
<mx:XML id="xmlDP">
<component data="escape('<');" />
</mx:XML>
This gives the following compilation error:
The value of attribute "data" must not contain the '<'
character.
As does using the escape character as such:
<mx:XML id="xmlDP">
<component data="\<" />
</mx:XML>
Below is an example of what the escape character may be used
for in AS:
var myString:String = "\"";
trace(myString);
// result: "
Likewise, I can escape the < character as such:
var myString:String = escape("<");
trace(myString);
// result: %3C
<mx:XML id="xmlDP">
<component data="%3C" />
</mx:XML>
trace(un-escape(xmlDP.@data));
// result: <
As you can see, using %3C and unescaping in AS will yield the
correct result; however, this is not a practical method of
representing the data in MXML as I would have to write an AS method
to un-escape the XML string anyway, so I might as well just store
the data in AS to begin with. I was hoping for a way to source an
mx:XML object, without having to load it into ActionScript
manually. Here’s an example of the functionality I would
expect:
<mx:XML id="xmlDP">
<component data=">" />
</mx:XML>
trace(xmlDP.@data);
// result: >
Only this does not work for the less than symbol. I’m
assuming at this point that this is a bug in the Flex compiler.
Thanks again for your help troubleshooting this one!

Export / Convert for embedding in HTML.

The Title says it all :P
How can I export or convert a captivate project such that in
can be embedded as a Flash video on a website?
Any and all help appreciated :D

Hi Ken
If you have a few different Full Motion Video (FMV) clips and
are using Captivate 3, just make sure that they are all in the same
folder and you should be good to go. Also, you might find that
whatever authoring tool you use will handle inserting the .SWF
properly so you may embed it. Admittedly, trying to dissect what is
going on with the Captivate supplied HTML code will be a bit on the
"iffy" side. This is because of the way it loads up. Loads in the
HTML, looks for the standard.js, loads in the skin .SWF file and
that file loads in the main movie part.
Sorry, but aside from that, I've got no magickal tricks up my
sleeve. Unless you are referring to consolidating the skin .SWF and
the movie .SWF. To to that, click Project > Skin... > Borders
tab and DE-select the "Show Borders" check box. The side effect of
doing that is that the controls cover part of your project when you
play it back.
Cheers... Rick

GetURL isn't working when flash button is embedded into HTML

I'm making a basic HTML site with flash buttons that direct to hyperlinks.
I've made a simple flash button with the code on the button actions as:
on (release) {
getURL("http://www.google.com","_blank");
The button works great when I export it in Flash.
When i embed into the HTML using dreamweaver and preview/upload the site.... the button is there but when clicked it doesn't direct to the hyperlink.
ANy ideas? Thanks. Brendan.

Use Flash to generate an html page and test that on the server. If that works, then replace whatever Dreamweaver did with the Flash-made embedding code. Beyond that, a link to the file on the server could shed some light.

Problem loading .swf embedded with HTML

Hi All,
I have embedded .swf file with HTML. It is working fine with
win xp and win 2003. But not working on win 2000 server.
I have set the MIME in IIS for .swf.
Please let me know what setting I should configure.
Thanks,
Aung

does container exit on the timeline that contains your code?
is master.swf in the same directory with your flash swf and
html?

Embedding an HTML page in a Flash Movie

I am trying to embed an HTML page in the center of a Flash
movie and I was wondering if this is possible, and if so, what is
the code to do so. I want it as a small box in the middle of my
SWF.

You can add HTML formatted txt to a TextField or a TextArea
Component. This only allows for simple things, a href, b, u, i,
p... But for a full HTML capabilities you may want to look into a
DIV container that sits on top of your flash object using CSS
styles.

Embedding Lightroom HTML gallery with Dreamweaver

I'm new to Dreamweaver and have used it to build a portfolio website. I've created HTML image galleries using Lightroom and would like to integrate these galleries into my existing page design. Lightroom generates an Index file, as well as Context and Resources folders. I've seen an earlier discussion about using LR to upload the galleries to my host, then edit the HTML to link the gallery pages to my other web pages. This strikes me as cumbersome for two products made by a single company.
What I'm after is a clear answer about if I can embed these HTML galleries quickly and easily into my existing page design? My other solution is to use the Airtight SimpleViewer gallery, but since it's using Flash, my galleries won't work on Apple mobile devices.
I'm using Dreamweaver CS5.5 and Lightroom 3.
Thanks in advance for any help.

You can't edit a flash gallery with Dreamweaver.
To make changes to the LR flash gallery you would require a copy of the original fla file and a copy of Flash to edit it.
The index file you see is the one that loads the flash player to play your gallery. The message is what is seen in a browser that doesn't have flash player installed.
You can make amendments to the gallery itself by changing the xml files, although the changes you can make here can also be made in LR itself so why bother?
You can embed the gallery itself in your own html page. Using insert, media and then finding the gallery.swf file. As long as you then upload everything in the correct locations (including the scrippt files abd the new html file in the same folder structure it will work.
There are other flash galleries that are far easier to embed available. However in order to make serious changes to flash galleries of any type you will require the original fla file and most designers are not going to give you that! Adobe does give away the fla's for the galleries that ship with PS.

Embedding with html page

Hi,
I want to make a pdf fill able form by livecycle or acrobat pro. In which there will be a button.By clicking this button I want to embed it with a html page.Is it possibe for abobe acrobat pro or adobe livecycle? I f possible how can I make thos button?

Hi,
I want to make a pdf fill able form by livecycle or acrobat pro. In which there will be a button.By clicking this button I want to embed it with a html page.Is it possibe for abobe acrobat pro or adobe livecycle? I f possible how can I make thos button?

IE and embedded external HTML and feedback

Hi to all,
i'm developing a new web site but i decided to create my own attractive menu. Please guys tell me what you thing
and please if there is someone to check the site with IE 6 or 7 i'm not sure that the menu loads on IE.
2012.alliedendeavours.com
Thank you in advance.
Message was edited by: netnod

Hello Bart,
you can grab the code for acccourdion menu from Mootools .. here i will provide you with a working example .. http://clientside.cnet.com/wiki/beginnersguide.html
Apple are also using similar technique but with scripaculos and prototype
thank you very much for pointing me my error with IE (it is fixed and the site must work in all browsers)
namaste !
netnod
Message was edited by: netnod

Flash embedded in html won't work

Hi, I have been trying to make a html file containing an swf
work on my website. both swf and html are in my public_html folder,
the swf works on its own and when I substitute the swf name in the
html file for a different swf that one works. Obviously there is a
problem with the swf file. It is quite big (2.7MB) and there are a
couple of error messages associated with it (because database is
not set up yet) but as I say it works as an swf on its own.
Sorry for the rambling question but can anybody help me? Its
for a project for college!

Hi again!
Apparently it was just a question of waiting. the swf file
was so bi (2.7MB) that it took about 15 seconds to come on screen.
I had x'd off of it too early!
Cheers
Marty

Zoomify embedding with HTML Snippet?

Can you use Zoomify with HTML Snippet in iWeb '08? I can't seem to make it work.

I have placed a Zoomify an my site and there i explaned how to do this
1.If you are ready in Photoshop and have exported the file you’ll find a web-page with the name filename.html and a map that’s called filename_img. Open the HTML page with software like Taco HTML Edit. (Freeware)
2.Select al the code and copy it.
3.Go to the web-page in iWeb where you want Zoomify, choose webwidget and paste in the HTML.
4.Publish your site.
5.If finished, open your iDisk and open the map with your page name (path iDisk(your name)/web/your site name/your page name)
6.Copy the map filename_img to the map called as the page name. This can take some time
Take a look on this page: http://web.mac.com/guy.beckers1/mediainbelgium/Home.html

Embedding in HTML

Similar Messages

Maybe you are looking for