Embedding SWF file with SAP Netweaver BI Connection to JSP page

All,
Is it possible to embed a SWF file with SAP Netweaver BI connection that is already published in BW system to a JSP page?
Thanks...

Hallo,
embedding the published web-template via iframe into the jsp should work:
<iframe id="test" src="/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?DASHBOARD=TECHNICAL_NAME_DASHBOARD" width="600" height="800" />
Regards,
Roman

Similar Messages

  • Help for PowerPoint 2007 crash when running embedded SWF file with latest Flash Player?

    I have developed in Xcelsius 2008 SP4 a dashboard with only Excel as the source. I output to PowerPoint and then save it as a PowerPoint 2003 PPS file. On more than a few machines that have PowerPoint 2007, PowerPoint crashes when I attempt to run the presentation. This happens only with later versions of Flash Player. I have tried uninstalling/reinstalling the latest Flash Player but it still crashes. However, when I revert back to Flash Player 10.1.159..., in PP 2007 the presentation runs perfectly.
    With regard to the error I receive in PowerPoint 2007, it is as follows:
    Error Signature:
    AppName: powerpnt.exe AppVer: 12.0.6500.5000 AppStamp:49a68f9d
    ModName: flash10u.ocx ModVer: 10.3.181.34 ModStamp:4e011a1d
    fDebug: 0 Offset: 003a893c
    Of note is that this behavior does not happen in PowerPoint 2003 nor does it happen when the file is saved as a SWF and launched directly in the browser on the problem machines.
    I have to assume that this has happened to others so any help you could provide would be VERY appreciated.
    Thank you

    Hello,
    on the first glance I see these: data="file:///Macintosh HD/Users/user/Documents/Website/Working.swf", what means the path to your swf file is pointing to your local hard drive which nobody can see except you. Please replace all thes pathes with the correct ones and load up your file(s) again.
    If the problem remains, please send a link to your website in question, no matter how it looks like..
    Hans-Günter

  • Errors when trying to connect with SAP Netweaver BW Connection

    Hi,
    I'm trying to pull in data from a Bex query using the BW Connection.
    I'm on SP4.
    When I add the connection from Data Manager, I can logon to BW, however when I browse for queries I get .COM exceptions and Class not Registered errors.
    Any ideas what could be causing this?
    Thanks,
    Angela.

    Hi,
    To design dashboards using BICS connection these are the prerequisits :
    on the client side : Xcelsius Enterprise Designer 2008 SP2 or above (trial or engage versions do not offer this connectivity),
                         SAP GUI patch 901 or above
    on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks.
    To view dashboard (run time) :
    on the client side : a web browser, Adobe Flash Player
    on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks
    Important Note: The BI Java stack and Single Sign On between ABAP and Java are a must have to get this connection working.
    @Sri

  • Problem connectivity of Web Dympro with SAP Netweaver

    Hi guys,
    I've a problem connectivity of Web Dympro with SAP Netweaver
    I installed Sap NW in a machine on the local network with IP 192.168.x.y, and I can connect to it without problems; I can use the portal and implement jobs in Visual Composer.  
    After installing Sap Developer Studio, I connected it successfully to the NW through the menu "Preferences->SAP j2EE engine" selecting the option "SAP J2EE is installed on remote hosts" and inserting IP address of the machine with NW (192.168.x.y) and port 3900.
    Using these parameters the logon works, in fact I can see the tab "J2EE engine".  
    The problem is that when I try to make the deploy, Web Dynpro asks me the SDM password  (that I'm sure I've inserted correctly) but it returns the following error to me:
    Deployment aborted
    Settings
    SDM host : SVR-NW
    SDM port : 50118
    URL to deploy : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
    Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2010.09.01.07.31.29':
    Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [svr-nw] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
    Deployment exception : The deployment of at least one item aborted
    I want to add that  I use Win XP Prof, and I set the same credentials (user "Administrator" and the correct password) I used on the machine where SAP NW is installed.

    Hi Michele,
    There were 2 cases I explained, and the second was the one in case your SDM was blocked. Did you try the first one?
    Anyways, here is something more that you can try to get it working. In case the SDM password is valid, did you log into the portal as the Administrator? If yes, then you must have been asked to change the password. If you did change the password there, login to the remoteGUI using the Master password (abcd1234) and change the password there also to the same password you use for Administrator on the Portal. Now try again.
    In case the above doesnt work, start the configtool.bat from \usr\sap\J2E\JC01\j2ee\configtool and go to secure store. Here define the J2E passwords again (the same new password you gave for the Administrator in the portal), save and restart the server. I think it would work then
    Hope that helps you out!
    Bye,
    Sameer
    P.S - the main thing is that the error you got was Authentication failure using the Administrator username. Thats why you have to make sure that the password for the SDM is the same as what you gave for the Administrator login in the portal. So after you login into the remoteGUI, CHANGE the password to what you have for the Administrator(just like the one in the portal).
    Message was edited by: Sameer Jagirdar

  • How to generate SWF file with dynamic data but no live connection

    Hello,
    We got a requirement where we have to email out SWF file either in PPT or outlook generated from BOBJ universe. When the file reaches the customer who would be outside our network with no access to our servers or data should be able to view the swf file with data. So the goal is to generate these files automatically and should not prompt for BOBJ login or wouldn't have ability to query the database but need to report data pertaining to the customer.
    Any help in this regards is greatly appreciated.
    Thanks
    Manohar

    Hi Manohar,
    You can use QAAWS(query as a web services) and build your queries on universe.
    You get an option of hardcoding the user id and password in the data connection for QAAWS which will not asks the users for login credentials.
    This will hepl the user to veiw the latest data from the database and the user wont be asked for login too.
    Thanks,
    Amit.

  • How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

    Hello to all,
    sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
    Thanks and regards,
    Galyna

    Hi,
    In previous link contain this info
    This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
    1)      Go to System Administration
    2)      Go to System Configuration
    3)      Go to Portal Content (Right Side Panel), open that folder.
    4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
    5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
    the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
    For this exercise, we'll use the simplest type.
    6)      Choose next
    7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
    about the system then give them in the "Description" field.
    8)      Open the Newly Created System.
    9)      Now when you want to create a New System, you have to fill four Properties they are:
    "Connector" - contains basic connectivty details
    "Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
    "Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
    "User Management".
    You also need at least one "System Alias" has to be defined from the Display drop down menu.
    Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
    10)  Select "Connector" property, now fill the required fields such as:
    a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
    which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
    it will open a window which has the Application Server Name.
    b)      Logical System Name - Give the logical name as defined in the backend system
    c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
    d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
    e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
    f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
    11)  Select "Internet transaction Server (ITS)" property, now fill the required fields like
    a)      ITS Description à Give some Description
    b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
    port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
    c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
    Transaction Code "SICF", it opens a new window go to:
          default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
    that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
    the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
    d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
    visible when you opened "Test Service" window.
    12)  Select "Web Application Server" property , now fill the required fields like
    a)      Web AS Description -> Give some Description
    b)      Web AS Host Name - same as ITS Host Name
    c)      Web AS Path - usually /sap/bc/bsp/sapd)*    
    Web AS Protocol - should be same as the ITS Protocol.
    13)   Select "User Management" property, now fill the required fields like
    a)      Authentication Ticket Type - Since we are not using SSO leave the field
    empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
    b)      Logon Method - Select UIDPW.
    c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
    just have user rights then choose "user", better go for "admin/user".
    14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
    a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
    15)  Now that System is created we have to create a iView which will display the given Transaction Code.
    16)  Go To "Content Administration".
    17)  Go To "Portal Content".
    18)  Go to Portal Content (Right Side Panel), open that folder
    19)  Right Click on Portal Content, a Panel is displayed select "New" -> iView
    20)  Select iView template, click next
    21)  Select "SAP Transaction iView" from the list of templates available. Click next.
    22)  Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
    23)   Select "SAP GUI for HTML" radio button. Click next
    24)  Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
    25)  Now Preview the iView
    26)  You will see a new Window where in SE12 Dictionary Display window is displayed.
    Regards,
    Senthil K.

  • How to place a Flash swf file with a movie FLV file embedded in DW

         My hair is getting shorter by the hour or maybe missing.  I have created a SWF file with Flash 8 that has an embedded FLV file that was created from a MP4 file.   The SWF file works perfectly in FLASH including my Flash nav buttons, and the movie with soundtrack and the buttons for control of volume and start stop.  Now I am ready to place it on the web using DW to make the html page.  What happens when I test the page on FireFox or IE is the background loads, the buttons load but do not work properly anymore but worse than that:  The slide show and the control buttons do not even show up. 
         I am also having trouble defining my site locally.  I select new site and tell it where every thing is but no luck. All in the same directory, right now I have a image directory but I have not used them on the page as the only image is a jpg and flv file and they are embedded in the swf file.
         I know this is 2 different programs but the Flash files need to be placed in a HTML file to be uploaded, and I have to text them first.
    HELP
    Randy

    from the Premiere Pro Help section about importing SWF files:
    " Interactive content and scripted animation are not retained. Animation defined by keyframes in the main, top-level movie is retained."

  • Max allowed No of rows in SAP NetWeaver BW Connection

    Hi Experts,
    I am building a dashboard using SAP Netweaver BW Connection.
    Query results in approx 4000 rows of data.(we know its not preferred to go with >512 rows of data but client is ok with the performance issue because of more data).
    When i publish the dashboard its showing initializing.... and not moving any further.
    I have changed the max. no of rows in the xcelcius(File->Preferences->Excel options->5000).
    Please help me in solving this problem ASAP.
    Thanks a ton in advance,
    Bhargava Bommidi.
    Edited by: BHARGAVA  BOMMIDI on Mar 31, 2010 11:42 AM

    Hi Bhargav,
    I'm also facing the same issue.
    Have done all the process given in,SAP Note 1307538.Also changed necessary parameters in Xcelsius.(File->Pref.->Excel Options)
    Still the issue is... LiveOffice brings the whole data (approx.>1500 rows) in excel successfully,but when I run the dashboard through parameter/ prompt to webi report it again truncates row after 512 rows.
    Looking fwd for help.
    Regards,
    Chitra

  • Error #2032 when using SAP NetWeaver BI Connection

    Hi,
    I'm trying to use to new SAP NetWeaver BI Connection in Xcelsius SP2, but when I try to connect to a BEx Query, I receive error #2032.
    I have a crossdomain.xml file in the Tomcat root of the BO-server, and the Adobe Global Security Settings are also filled in with all directories of my BO-server.
    Has someone an idea why this error occurs, and how to solve it?
    I'm working on Sap NetWeaver 7.0.1 SP5.
    Lieven

    We are using in total 6 different clients with Xcelsius 2008 Enterprise SP2. With two of them we can use SAP NetWeaver BI Connection and do not receive any error. The rest is showing the error message #2032.
    There is one difference between the systems which are working and the ones which are not:
    After selecting the query in the BI NetWeaver Connection there is an additional popup "Windows security" appearing.
    --> The server sapbw100.xxxx at BicsRemote/Config1 requires a username and password.
    Filling in the username and password the data from the query appear in the xcelsius.
    With the clients which provide an error there is no such popoup.
    If we create on an existing installation an .xlf file and open it on one which is not working, the Data Managers show the correct connection. As soon as we click on refreshing data, error #2032 appears.
    System configuration clients:
    Windows XP and Windows 7
    Office 2007
    SAP Business Explorer Patch 1001
    Regarding the working clients:
    One is working on XP the other on Windows 7
    Both on Xcelsius 5.2.0.0
    Installing the FixPatch for SP2 is also not helping to solve the problem.
    All the inputs in this thread have been tested but without sucess. Till now we could not install note 1380059 since related notes are not yet released.

  • SAP Netweaver BI Connection

    Hi,
    When I integrate a BEx report with Xcelsius via "SAP Netweaver BI Connection", dashboards can only be published to portal.
    Is there any chance to use them locally (e.g. pdf, swf)?
    Thanks,
    Erdem

    Hi  Michel,
    i got the same "COM Exception".
    Our BI application server belongs to a restricted network. We can only access through SAProuter service.
    I changed the SAPString field of my BI entry:
    Original SAP GUI entry:
    Application server: 192.0.0.194
    SAPString: /H/paquito.elchocolatero.local/H/
    New SAP GUI entry:
    Application server: /H/paquito.elchocolatero.local/H/ 192.0.0.194
    SAPString:
    With the original one, it tried to connect to the Application Server directly. It didn't use the SAP String field. With the new one, i forced to use it.
    It worked for us. Maybe a XCelsius bug. We are using the XCelsius SP3.
    Kind regards,
    Raul.
    Edited by: Raul Arienza on Dec 28, 2009 5:36 PM
    Edited by: Raul Arienza on Dec 28, 2009 5:37 PM

  • SAP NetWeaver BW Connection not working for SBOP4.0

    Hello Experts,
    Following are the steps & current patches:
    SBOP 4.0
    Dashboard Design , version: 6.0.0.0
    SAP Logon
    Release : 720
    Patch: 5
    1. SAP BW  & NetWeaver Portal are not SSO(Single Sign-on)
    2. I open the Dashboard Designer
    3. Click on "Manage Connection"
    4. Select 'SAP NetWeaver BW Connection'
    5. It pops-up the Log-on screen
    6. Pass on the required information
    7. Use the  query browser & selected the query
    8. it takes the query with no error message
    Issue:
    1. It is not showing the Input values & Output values 
    Not able to display the BW Bex Query element using Dashboard Designer - SAP NetWeaver BW Connection.
    Please let me know if we are missing any config. or step.
    Thanks
    Mahendra

    Thanks Amit for your suggestions. I tried the below steps & still it is not working:
    1. re-installed Adobe version 10.1
    2. Tried to connect the BW Bex query using SAP NetWeaver BW connection.
    3. I am getting no error but Dashboard designer is not able to display the Input values & Output values of the BW BEx query
    As I had mentioned you earlier that when I open the Bex report using the designer using the IE, it calls the portal window & I have to enter the LDAP password then the report opens in the portal.
    So I think as our BW & portal are not configured as SSO so when the Dashboard designer tried to load the query from the xml file it fails. It may be because it required my LDAP login credentials.
    Please let me know your suggestions.
    Thanks
    Mahendra

  • Why does embeded .swf file goes crazy in IE but not in other browsers?

    hi everyone
    I'm building a SharePoint page with an embedded .swf file that is capable of detecting the current URL to activate and show content. Everything goes smoothly in all the browsers I've tested it except IE. When I open the SharePoint page in IE the .swf just reproduces the frames non stop, It completely ignores my scripts and I cant find anything that could be responsible of this. besides the url detection script, i just have simple button configuration for the timeline and general stops.
    any idea?.....anyone?

    Normally when swf's play differently for different browsers it is due to the embedding code used in the html page.

  • Error 2032 in SAP Netweaver BI Connection

    I am using an xcelsius dashboard through a BICS connection. I am able to connect to a BEx query and publish this dashboard to SAP BW system. I also able to launch this dashboard in IE and everything works fine for next 30 min. I am able to go to multiple tabs in the dashboard and trigger various queries etc. However, after exactly 30 min, I get the error 2032. The exact error text says:
    An error has occurred.
    For more information, contact the file creator or your system administrator.
    Error: Error #2032
    Connection Type: SAP NetWeaver BI Connection
    I am unable to find any such settings on the BW server side which can break the connection after 30 min. Also, BO is not involved as it's published on BW server itself. So, I am confused about what could be the reason and how to fix it.
    Thanks in advance for your help.
    Regards
    Akhilesh

    Hi All,
    We were getting the same issue (Error #2032, while connecting to Bex query from DashboardDesign tool, "The First Post"),
    The issue got resolved by installing  "patch 14 for DashboardDesign 4.0 SP2".
    You guys can try the same.
    Thanks
    Riyaz

  • Using 2 data (SAP Netweaver BW) connections in Xcelsius dashboard

    I have a situation when using 2 data (SAP Netweaver BW) connections in Xcelsius dashboard.
    Break-down of issue:
    I have a toggle button in our Sales dashboard which displays Top Ten Customers versus Bottom Ten Customers.  I use the value of the toggle button to trigger the data connections.  When a user clicks the toggle button for Top Ten Customers the value of the toggle button would be a 1 which would trigger a BW query to capture sales data for the Top Ten Customers.  When a a user clicks the toggle button for Bottom Ten Customers the value of the toggle button would be a 0 which would trigger a BW query to capture sales data for the Bottom Ten Custoemrs.  NOTE: all the key figures in both querys use a scaling factor of 1000.  So for example, if invoiced sale has a value of 100,000 the scaling factor of a 1000 would display this key figure with a value of a 100.  The issue I am having with the dashboard is when I click the toggle botton for the Top ten Customers, the value shows as 100 and if i click the toggle button for Bottom ten Customers the value would show as 100,000.  I need the toggle button to show the values using the scaling factor coming from the BW queries for both Top Ten Customers and Bottom Ten Customers. It's only using the 1000 scaling factor coming from the Top Ten Customers.
    Any help on this issue would be graetly appreciated... 
    Thanks,
    Joe

    Hi, I get both. I think the errors are connected. On the one hand it is not possible to create any SAP NetWeaver BW connection, because you cannot enter the connection details- just as in the screen above. The only option you have is to use the "browse" button, but then the blank error appears.
    When trying to open a Dashboard from Portal you have to use SAP->Open and then SAP GUI should appear, but here I get the error "Could not open from SAP" instead. I have installed BEx and SAP GUI of course, reinstalled all of them two times just as recommended above, also reinstalled MS Excel, Flash, Java. Furthermore I tried to repair the installation and to change between different editions, personal, departmental etc.
    In the meantime I think it should not be possible at all to connect to BW with the departmental license key. Can somebody confirm that?

  • Compatibility of Informatica with SAP Netweaver BI 2004s

    Hi,
    Currently we are using Informatica Power Center Version 6 with SAP BW Version 3.1. So far there has been no problems in terms of connectivity or extraction. We are now looking to upgrade to SAP Netweaver BI 2004s. Would anyone be able to tell whether our existing Informatica would be compatible with the Netweaver version ? I am told that the latest Informatica is now version 7. Do we need to also upgrade that Informatica to version 7 in order for it to be compatible with SAP Netweaver BI 2004s?
    Any inputs regarding this are highly appreciated. Thanks in advance.

    Hi,
    Check this,.. this has very little info ..
    http://www.taborcommunications.com/dsstar/04/1130/109597.html
    Thanks,
    Raj

Maybe you are looking for