Embeding ALV table in dynamically created view container UI element

Hi ,
I created a view container UI element dynamically .that is working fine . I am using standard ALV component . Now i want to embed ALV table in View container UI element dynamically > please help me in this .
Thanks in advance ,
Vijay vorsu

Hi,
I am not sure how to do add an ALV table dynamically but you can have a look at this blog which talks about creating and adding a TABLE ui element dynamically. And TABLE UI element may solve your problem.
http://mamma1360.blog.163.com/blog/static/314740992008127115551165/
Thanks,
Abhishek

Similar Messages

Problem with embeding the same view in dynamically created view container

Hello Experts,
              I am getiing a dump when i try to embed the same view inside the dynamically created view container of
dynamically created tabs of a tabstrip
The requirement go like this, i have 2 views in which i have have to embed the 2nd view to view1 where i have an empty
tabstrip without tabs. During runtime i create tabs as well as view containers accordingly and then try to embed view2 in tabs.
I have put the below mentioned code in HANDLEIN,
DATA: lref_vcntlr TYPE REF TO if_wd_view_controller,
        lref_comp    TYPE REF TO if_wd_component_usage,
        lv_embed_pos TYPE string.
lref_vcntlr = wd_this->wd_get_api( ).
lv_embed_pos = 'FILE_PERS_EDIT/VC_GENERAL'.
TRY.
      CALL METHOD lref_vcntlr->do_dynamic_navigation
        EXPORTING
          source_window_name        = 'FILE_PERSISTENCE_WND'          " Window
          source_vusage_name        = 'FILE_PERS_EDIT_USAGE_1'       " Source View usage
          source_plug_name          = 'TO_EDIT_LAYOUT'                       " Outbound plug
          target_view_name          = 'PERS_EDIT_LAYOUT'                  " Second view to be embedded
          target_plug_name          = 'IN'                                                  " Second view inboun plug
          target_embedding_position = lv_embed_pos
        RECEIVING
          component_usage           = lref_comp.
    CATCH cx_wd_runtime_repository .
ENDTRY.
wd_this->fire_to_edit_layout_plg( ).
This works fine for the first time.
However onaction tab select i change the embeding position( 'FILE_PERS_EDIT/view container name of different tab') of the view2 an try to embed view2 in a different tab.
At this point i get a dump stating View2 already present in the window 'FILE_PERSISTENCE_WND' of component.
I think, the view2 embediing has to be removed before i add the view2 in a different tab
Kindly let me know how to remove view2 embedding from tab1 before i add a view2 to a different tab or is there any other
means to handle this problem?
Thanks & Best Regards,
Srini.

Hello Srini,
I found a solution to your problem, because I had a similar task.
In WDDOINIT I changed the method do_dynamic_navigation to if_wd_navigation_services_new~prepare_dynamic_navigation:
DATA:
    l_view_controller_api TYPE REF TO if_wd_view_controller.
l_view_controller_api = wd_this->wd_get_api( ).
TRY.
      CALL METHOD l_view_controller_api->if_wd_navigation_services_new~prepare_dynamic_navigation
        EXPORTING
          source_window_name        = 'WDW_MAIN'
          source_vusage_name        = 'VW_SUB_USAGE_1'
          source_plug_name          = 'TO_VW_CONTENT'
          target_component_name     = 'ZTEST_DYNAMIC'
          target_view_name          = 'VW_CONTENT'
          target_plug_name          = 'DEFAULT'
          target_embedding_position = 'VW_MAIN/VC_TAB.VW_SUB/TAB1_VC'
        RECEIVING
          repository_handle         = wd_this->g_rep_handle.
    CATCH cx_wd_runtime_repository .
ENDTRY.
wd_this->fire_to_vw_content_plg( param1 = 'TAB1' ).
In the action I first deleted the navigation targets, then navigated to the empty-view and last I called my target view:
DATA:
    lv_position           TYPE string,
    l_view_controller_api TYPE REF TO if_wd_view_controller,
    lr_view_usage         TYPE REF TO if_wd_rr_view_usage,
    lr_view_***_t         TYPE wdrr_vca_objects,
    lr_view_***           LIKE LINE OF lr_view_***_t.
l_view_controller_api = wd_this->wd_get_api( ).
lr_view_usage = wd_this->g_view->get_view_usage( ).
lr_view_usage->delete_all_navigation_targets( plug_name = 'TO_VW_CONTENT' ).
CLEAR lv_position.
CONCATENATE 'VW_MAIN/VC_TAB.VW_SUB/' old_tab '_VC' INTO lv_position.
TRY.
      l_view_controller_api->if_wd_navigation_services_new~do_dynamic_navigation(
      source_window_name = 'WDW_MAIN'
      source_vusage_name = 'VW_SUB_USAGE_1'
      source_plug_name   = 'TO_EMPTYVIEW'
      target_component_name = 'ZTEST_DYNAMIC'
      target_view_name   = 'EMPTYVIEW'
      target_plug_name   = 'DEFAULT'
      target_embedding_position = lv_position ).
    CATCH cx_wd_runtime_repository.
ENDTRY.
CLEAR lv_position.
CONCATENATE 'VW_MAIN/VC_TAB.VW_SUB/' tab '_VC' INTO lv_position.
TRY.
      wd_this->g_rep_handle = l_view_controller_api->if_wd_navigation_services_new~prepare_dynamic_navigation(
        source_window_name = 'WDW_MAIN'
        source_vusage_name = 'VW_SUB_USAGE_1'
        source_plug_name   = 'TO_VW_CONTENT'
        target_component_name = 'ZTEST_DYNAMIC'
        target_view_name   = 'VW_CONTENT'
        target_plug_name   = 'DEFAULT'
        target_embedding_position = lv_position ).
    CATCH cx_wd_runtime_repository.
ENDTRY.
wd_this->fire_to_vw_content_plg( param1 = tab ).
Ann.: I my example, I had 3 views: VW_MAIN which embedds VW_SUB. VW_SUB has the tabs in it and VW_SUB embedds VW_CONTENT.
BR,
Roland

Dynamically embed View into View Container UI Element

Hi all,
I'm searching for a possibility to embed a view into a dynamically created View container element.
I want to do this out of another view, where a tabstrip is contained. So I have a button on this view for generation of a new tab with an view container element in it. Now I got to the point where I have to set the view to this container within the tab strip.
I read several blogs and articles, where this is done via the window manager within an method of the window, but non how to do this within a view.
Any ideas?
Thanks
Olli

HI,
that's nit what I wanted. What I want to do is a kind of table maintenance. There is a button under the tabstrip for creating a new row. If the user klicks on that button a new tab should be created for the new row. Therefore the view on the tabs are always the same.
I have created the tabstrib. dynamically add a tab to this strip on button press is no problem. Also a ViewContainerElement is created. But now I have to set the statically created view for the row maintenance into the container.
Thanks
Ragards
Olli

View Container UI element in a table popin dynamically

Hello people,
I create a WD Table dynamically using the runtime class. I also create the table popin and then I set it in the table using the method SET_POPIN from the runtime class.
Now my requirement is that I should be able to add the 'View Container UI Element' into this popin so that I can embed any other views into this VC UI E. I cannot find a way in which I can achieve this. I am able to do it statically but not dynamically.
Even though it is suggested that such a design would lead to performance issues, but I have to achieve this.
Regards
Rohan

Hi Anita,
you cannot set metadata at element level of a node. When you set the metadata ( example mime type or file name ) for a particular element in the node , it changes for all the element. So you are always getting the file for the last row. ( most recent set metadata ).
Try using the inteface IWDCachedWebResource for file download.
For each row add a button, and associate an action "DownloadFile" for it. Use the following "onAction" for the said action.
public void onActionDownloadFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionDownloadFile(ServerEvent)
    int selectedIndex = wdContext.nodeFileTab().getLeadSelection();
    IPrivateView_pdfView.IFileTabElement file = wdContext.nodeFileTab().getFileTabElementAt(selectedIndex);
    try {
     IWDCachedWebResource webResource = WDWebResource.getWebResource(
          this.
          getByteArrayFromResourcePath("/sapmnt/PCD/global/config/cm/etc/pdf/"+
          wdContext.nodeFileTab().getFileTabElementAt().getFilename(selectedIndex),
          WDWebResourceType.PDF);
     wdComponentAPI.getWindowManager().createExternalWindow(webResource.getURL(),"Download File",true).open();
   catch(Exception e) {
     // take some action
     wdComponentAPI.getMessageManager().reportException(e.toString(),true);
    //@@end
Hope you get a solution.
Regards
KK.

Embedding view in view container UI element

Hello,
   I have a requirement which is given below:
I have a MAIN view where there is a view container UI element. This container holds one of 3 views(VIEW1,VIEW2 and VIEW3) depending on user input. Initially VIEW1 is displayed (this is set as the default view). Then the user navigates to VIEW2 and enters some selection criteria and confirms. Then VIEW3 is displayed with the entered selection criteria. Then the user clicks on search on the MAIN view and the RESULT view is displayed. When the user clicks on back functionality in the RESULT view,MAIN view is again displayed but the view container has VIEW1. The user wants to see VIEW3 in the viewcontainer in MAIN view.
Please let me know if there is anyway to achieve this.
Regards
Nilanjan

Hi Nilanjan,
Create three context attributes V1,V2,V3 of type char1.
Default value for V1 is 'X'.
Bind the visible property of each view container to the above attributes like
View1-V1
View2-V2
View3-V3
When you run the application, defaul View1 displays, coz its default values set as 'X'.
Now depends up on the logic, change the value of each attribute as 'X' or SPACE .
Eg:
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->Element_context.
    DATA lv_v1 TYPE wd_this->Element_context-v1.
    DATA lv_v2 TYPE wd_this->Element_context-v2.
    DATA lv_v3 TYPE wd_this->Element_context-v3.
*   get element via lead selection
    lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
*   set single attribute
    lo_el_context->set_attribute(
      name = `V1`
      value = 'X' ).
*   set single attribute
    lo_el_context->set_attribute(
      name = `V2`
      value = '' ).
*   set single attribute
    lo_el_context->set_attribute(
      name = `V3`
      value = '' ).
or
*   set single attribute
    lo_el_context->set_attribute(
      name = `V1`
      value = '' ).
*   set single attribute
    lo_el_context->set_attribute(
      name = `V2`
      value = 'X' ).
*   set single attribute
    lo_el_context->set_attribute(
      name = `V3`
      value = '' ).
or
*   set single attribute
    lo_el_context->set_attribute(
      name = `V1`
      value = '' ).
*   set single attribute
    lo_el_context->set_attribute(
      name = `V2`
      value = '' ).
*   set single attribute
    lo_el_context->set_attribute(
      name = `V3`
      value = 'X' ).
Regards,
Amarnath S

Dynamically Binding to Dynamically Create View

I tried to copy the code of Dynamically Binding to Dynamically Create View object but something is wrong because when I am debbuging it doesnt work after the sentence vo.executeQuery();
I suspect that the reason could be how I created the view..
Your code is running well but not mine.
It shows this error
JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
null
I dont know why because the code is the same.
How did you create the objet view ?
Could you help me?

I'd recommend checking out this article on Debugging ADF Applications:
http://www.oracle.com/technology/products/jdev/tips/muench/debugger/index.html
and then reporting here the full stack trace using the tips described in that article.

Dynamically changing attributes of a field in view container UI element

In the layout of the web dynpro component I have added a view container UI element. I am populating the fields in the view container UI element in methods in component controller using the following code
*--Adding a Checkbox
lv_str = wd_assist->if_wd_component_assistance~get_text( '009' ).
CALL METHOD wd_this->att_wd_handler->add_parameter_field
    EXPORTING
      i_id          = 'CHB_DOWNLOAD_CHECKBOX'
      i_description = lv_str
      i_value       = lv_chb_download_checkbox
      i_as_checkbox = abap_true.
*--Adding a Parameter
    lv_str = wd_assist->if_wd_component_assistance~get_text( '010' ).
    CALL METHOD wd_this->att_wd_handler->add_parameter_field
      EXPORTING
        i_id          = 'CHB_DOWNLOAD_PATH'
        i_description = lv_str
        i_value       = lv_chb_download_path
        i_as_checkbox = abap_false.
Now based on the checkbox selection I want to make the field CHB_DOWNLOAD_PATH mandatory and also on F4 for CHB_DOWNLOAD_PATH I want a method to be called. Where must i write the coding for the above conditions and how? Please help.

hi
In your method there would be a parameter ie ON_TOGGLE where you can write the name of your event .
Whenever your checkbox will be clicked that event wil be called.
You can write your code in that event itself.
Regards
Kuldeep

WD4A Dynamic ALV Table with dynamic tables

Hi all,
first I want give you the information what I try to do.
I have an another WD4A application for administrative use in which I can assign certain tablefields to a certain user. You can say it's something like a customizing application.
In the next application (with my issues) I will display the tables for the user, but these tables are not the complete table.
I have a node in my context of the component controller which is bound to my ALV. I add during the runtime attributes to my node.
* .... coding ....declaration
* get the node
lr_node = wd_context->get_child_node( 'M_TABLE' ).
lr_node_info ?= lr_node->get_node_info( ).
* remove the attributes, if exists
lr_node_info->remove_dynamic_attributes( ).
* .... coding ....
*   add attributes
    LOOP AT l_t_m_table INTO l_s_m_table.
      CLEAR ls_attribute.
*     name of the attribute
      MOVE l_s_m_table-NAME TO ls_attribute-NAME.
*     DDIC type of the attribute
      MOVE l_s_m_table-TYPE_NAME TO ls_attribute-TYPE_NAME.
*     If the DDIC has a gen namespace like /B135/ replace the / with _
      REPLACE ALL OCCURRENCES OF '/' IN ls_attribute-NAME WITH '_'.
*     add the attribute
      lr_node_info->add_attribute( EXPORTING
                                     attribute_info = ls_attribute ).
    ENDLOOP.
This coding works fine I get the columns in my ALV. Then I tried to fill my ALV table with data from a database table.
I created dynamicly an internal table with the following coding:
*   Create dynamic table
    CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
      EXPORTING
        IT_FIELDCATALOG = l_t_FLDCAT
      IMPORTING
        EP_TABLE = l_t_NEW_M_TABLE.
*   assign the table
    ASSIGN l_t_NEW_M_TABLE->* TO <M_TABLE>.
*   structure of table
    CREATE DATA l_s_NEW_M_TABLE LIKE LINE OF <M_TABLE>.
    ASSIGN l_s_NEW_M_TABLE->* TO <l_s_m_table>.
* get data from database
SELECT * FROM (l_m_table) INTO CORRESPONDING FIELDS OF TABLE <M_table> WHERE OBJVERS = 'A'.
With this coding I get the data from the database and only the required fields that means I have e.g. an itab with columns1, columns3, columns4 from the database.
I also added e.g. these columns (columns1, columns3, columns4 from the database) to the node as attribute. Now it should be possible to bind the table to the structure with this coding:
lr_comp_usage_m = wd_this->wd_cpuse_usage_alv_M_table( ).
*   create component if not active
    IF lr_comp_usage_m->has_active_component( ) IS INITIAL.
      lr_comp_usage_m->create_component( ).
    else.
* set data if node exists
      l_ref_interfacecontroller = wd_this->wd_cpifc_usage_alv_M_table( ).
      l_ref_interfacecontroller->set_data( lr_node ).
    endif.
*   bind table
    lr_node->bind_table( <M_TABLE> ).
Now, I get an error, which is caused by the table binding.
In ST22 I get:
Short text
    Line types of an internal table and a work area not compatible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WDR_CONTEXT_NODE_VAL=======CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The statement
       "INSERT wa INTO TABLE itab"
    requires the lines of the internal table "TABLE" and the
    work area " wa" to be compatible. Compatibility means
    equivalence in the context of ABAP/4 type checking.
    In this case, the condition is not satisfied because the internal table
    "TABLE" has the line type "u" and the length 28, but the work area " wa"
    has the type "C" and the length 2.
    (If the work area " wa" is the header line of the internal
    table "TABLE", the above inconsistency can arise if an internal
    table t with the line type T1 is passed to a subroutine (FORM or
    FUNCTION) as an actual parameter and the corresponding formal
    parameter p is declared in the subroutine by "TABLES p STRUCTURE T2".
    If then T1 and T2 are incompatible, the header line p
    has the type T2 (specifed by STRUCTURE), but the internal
    table p has the line type T1 (passed from the actual parameter)).
Source Code Extract
Line SourceCde
    1 method if_wd_context_node~get_static_attributes_table .
    2
    3   field-symbols:
    4     <element> like line of me->collection,
    5     <static_attributes> type data,
    6     <table> type index table.
    7
    8 * check whether elements are supllied or not
    9   if me->elements_supplied = abap_false.
   10     me->supply_elements( ).
   11   endif.
   12
   13   clear table.
   14
   15   if me->table_ref is not initial.
   16     assign me->table_ref->* to <table>.
   17     table = <table>.
   18   else.
   19     loop at me->collection assigning <element> from from to to.
   20       assign <element>->static_attributes->* to <static_attributes>.
error in line 21       insert <static_attributes> into table table.
   22     endloop.
   23   endif.
   24
   25 endmethod.
Any suggestions? Is it allowed to use bind_table() with a field symbol?
Another strange thing is that if I try the same with static itab and attributes during runtime it works, but only if the fields of the itab has the same name as the attributes, which means that I can not use itabs with fieldnames like /BI0/S_CUSTOMER and if I can not use them it's difficult to read data from database with SELECT * FROM ... INTO CORRESPONDING FIELDS OF TABLE itab.
Thanks in advance for your suggestions!
Best Regards,
Marcel

Hi Francois,
I solve it with the RTTI and the method
lr_node_info = lr_node_info->add_new_child_node(
                      name = 'Dynamic_TABLE'
                      IS_MANDATORY = ABAP_false
                      IS_MULTIPLE = ABAP_true
                      STATIC_ELEMENT_RTTI = lr_struct_descr
                      IS_STATIC = ABAP_false
I don't know why it doesn't work with adding attributes and binding the table after adding the attributes.
Anyway thanks for your help.
Best Regards,
Marcel

Not Yet Documented ADF Ex 9 Dynamically Binding to Dynamically Created View

I have dynamically created a View Object and would like to build a dynamic HTML Table on a web page based upon my view. I think something similar is done in Steve Muench's sample #9. My problem is I am new to ADF and the example was done in an earlier version of JDev (I am using 10.1.3.0.4) and the JSP page in the example will not compile. I get an error at:
<textarea style="width: 100%" name="sql" rows="3" ><c:out value="${param.sql}"/></textarea><br>
Saying required param "cols" is missing. I also get a nesting error in this code:
<tr>
<c:forEach var="attributeLabel" items="${bindings.DynamicViewObject.labelSet}">
<th>
because (I think) the compiler expects a </tr> and it is seeing the <c:forEach var="attributeLabel"> tag.
Is there a setting in JDeveloper I can use to allow this application to compile? Is there a similar example done in JSF as that is what my current application is being developed using.
TIA,
Jeff

Any help on this? Kind of Urgent...
Thanks,
Jeff

Creating view containing case statements received error ORA-22992

We have a create view referencing table through dblink. The select statement in the create view has case statements, when running the Select statement alone, results are return. However, when executing the create view, it returns:
SQL Error: ORA-22992: cannot use LOB locators selected from remote tables
22992. 00000 - "cannot use LOB locators selected from remote tables"
*Cause: A remote LOB column cannot be referenced.
*Action: Remove references to LOBs in remote tables.
One of the source table has LOB column but not in the select statement. The strange thing is when removing the case statement from the select, create view works fine. Can anybody tell me what caused the error and how to fix it?
Create View Snippet:
CREATE OR REPLACE VIEW "ABC"."XYZ" (....
AS SELECT
CASE
WHEN A.OUTAGE =1
THEN 'Y'
ELSE 'N'
END AS OUTAGE,
FROM
TABLEA@XXXX A
LEFT JOIN TABLEB@XXXX B
ON
A.LOC =B.LO
AND A.SITE =B.SITE
WHERE
A.CLASS ='CUSTOMER'
AND A.PLUSSISGIS =1;

What is your 4 digit Oracle version?
Try rewriting the query to not use ANSI SQL92 joins. I found a link where this solved a problem similar to yours.
DBLink problem ORA-22992
>
But, look at this curious thing: I re-write the query as follows:
SELECT A.ID, A.ID_REF, A.EVENDATE, B.DESCRIPTION
FROM A@ORCL A, B@ORCL B
WHERE A.ID_REF = B.ID_REF;
and it works fine... It seems like Oracle don't like the ANSI SQL92...
>
Several similar links by googling: 'SQL Error: ORA-22992'
http://www.dbuggr.com/smallwei/solution-error-ora-22992-lob-locators-selected-remote-tabl/
>
Fixing ORA-22992 “cannot use LOB locators selected from remote tables” error
You have migrated your Oracle 9i database to 10g and a distributed statement which worked fine in 9i now is getting error ORA-22992 “cannot use LOB locators selected from remote tables”. Even though the related remote table(s) does not contain any LOB column datatype.
FIX:
There is a bug on 9i,10g, and 11g that is related to this error. It is being fixed in 11.2. It can also be backported for previous 9i, 10g and 11g releases under the latest patchsets.
You may also do a workaround as follow:
Modify the affected SQL by adding the TO_CHAR function. For example:
-- Original SQL:
SELECT NVL2('a', 'b','c' ) FROM dual@remote_db;
-- Modified SQL:
SELECT TO_CHAR(NVL2('a','b','c')) FROM dual@remote_db;
>
See if that helps.

ALV Table and dynamic new column

Hi,
I have a ALV table with tree in one column (reccuring context value).
I would like dynamically to add new columns. I know the method of IF_WD_CONTEXT_NODE_INFO->ADD_NEW_CHILD_NODE, but this is used in another posts/blogs where whole table is generated dynamically. I have a table already and just want to add a new column.
Is that possible?
Thank you on advance, cheers.

Under normal circumstances you could use the Context API method ADD_ATTRIBUTE to create a dynamic attirubte:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/af/cb744176cb127de10000000a155106/frameset.htm
Unfortunately this is not compatible with the ALV. The ALV only supports static attributes. Therefore you will need to build up an entire RTTI based structure in memory and then dynamically re-create the entire context. This is a similar example:
data:
         rootnode_info type ref to if_wd_context_node_info,
         dyn_node type ref to if_wd_context_node,
         dyn_node_info type ref to if_wd_context_node_info,
         tabname_node type ref to if_wd_context_node,
         current_tablename type string,
         tablename type string,
         struct_type type ref to cl_abap_structdescr,
          table_type type ref to cl_abap_tabledescr,
          comp_tab    type cl_abap_structdescr=>component_table,
          comp        like line of comp_tab,
          my_table    type ref to data,
          my_row      type ref to data.
    loop at field_details assigning <wa_detail>.
* build a structure description from the list of single fields
          comp-name = <wa_detail>-field_code.
          comp-type ?= cl_abap_datadescr=>describe_by_name( 'STRING' ). "Replace with your dataType
        append comp to comp_tab.
      endloop.
struct_type = cl_abap_structdescr=>create( comp_tab ).
      dyn_node_info = rootnode_info->add_new_child_node(
         name                   = 'MDM_DATA'
         is_mandatory           = abap_false
         is_mandatory_selection = abap_false
         static_element_rtti    = struct_type
         is_multiple            = abap_true
         is_static              = abap_false ).

Which table the dynamic selection view will be stored

Dear Freinds,
I have created a dynamic selections view form Se80 > Editobject>Selection view > Created by adding the required tables pa0002,pa006,pa0009 . But the transport request we have saved it locally
now i want to create a transport request for the dynamic view . Could any please let me know how to create transport reqest for the Dynamic selection
View which has been created.
regards
divya

HiDivya,
yo have saved the changes into local object and now you want to generate the TRN and for the save you have to change the attribute > GOTO > Other object Entry and changed the package and TRN will generate .
Regards
Sheetal

Table aliases while creating views in KM

Hello All,
While executing an interface I noticed that it failed on the LKM step -
Create View on Source
(LKM MSQL to MSQL)
On investigation, I found the error was because of an in invalid alias (alias created was a sql server keyword) that ODI had assigned to the source table. I extracted the code from the KM and I am hoping someone could direct me on how I could modify the KM so that the alias ODI creates is different from what its currently set to.
TIA
MN

MN you dont need to modify the KM , when you click on the required Datastore , you will find the alias name , there change it accordingly or in the Datastore itself. I think that should help you .

How to delete Dynamically created input field UI Element

Hi all,
          I want to delete dynamically created input field and label.
Is there any method please tell.
Thanks in advance
Hemalatha

Hi,
In the WDEVENT parameter of the action handler you can find the event id.
***Variables
DATA:
    lv_selected type string.          "Selected tab value
***Structure and internal table for the Events and messages
DATA:
    lt_events type WDR_EVENT_PARAMETER_LIST,
    ls_events type WDR_EVENT_PARAMETER.
***Field symbols
field-symbols: <fs_value> type any.   "Attribute value in events table
***Move the event table to lt_events
lt_events = wdevent->parameters.
read table lt_events into ls_events with key name = 'SAVE'. "Button Id
if sy-subrc eq 0.
    assign ls_events-value->* to <fs_value>.
    if sy-subrc eq 0.
      lv_selected = <fs_value>.
    endif.                 "IF sy-subrc eq 0.
endif.                 "IF sy-subrc eq 0.
Regards,
Lekha.

Dynamic alv creation in dynamic tabstrip.

Hi,
I have already created tabstrip dynamically, now i need to create alv dynamically inside the dynamically created view container.. how can i embed the interface TABLE view of salv_wd_table in it dynamically.
Thanks and Regards
Tenzin

Hi,
Please check the below article 'Creating navigations and Embedding view at Run time'. This might be helpful for you.
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20abap/creating%20navigations%20and%20embedding%20views%20at%20runtime%20-%20web%20dynpro%20abap.pdf]
Regards,
Manne.

Embeding ALV table in dynamically created view container UI element

Similar Messages

Maybe you are looking for