Empty Document Found: Problem due to FCC
My scenario relates to a Sender File Adapter and a Receiver IDoc Adapter. My Outbound Message Type / Data Type has multiple Complex elements which I later replicated to only three(3) Complex elements to simplify checking the issue. The elements defined in IR are as follows:
1.EDI_DC: Element occuring once with multiple fields
2.E2IDKU1: Element occuring 0..unbounded with multiple fields
3.E2EDKO3: Element occuring 0..unbounded with multiple fields
IDirectory has a Sender File Adapter has a Communication channel with the following specifed in FCC:
Document Name: MT_RecManager_Test_O
Document Namespace: http://mrgnetwork.com/WF/RecManager
Document Offset: <nothing specified>
RecordSet Name: RecordSet
RecordSet Namespace: <nothing specified>
RecordSet Structure: EDI_DC40,1,E2IDKU1, *,E2EDK03, *
RecordSet Sequence: Ascending
RecordSets per Message: *
KeyFieldName: SEGNAM
KeyFieldType: String(Case Sensitive)
EDI_DC40.fieldNames: SEGNAM,MANDT,DOCNUM,DOCREL,STATUS,DIRECT, EDI_DC40_FILLER1
EDI_DC40.fieldFixedLengths: 10,3,16,4,2,1,6
EDI_DC40.keyFieldValue: EDI_DC40
EDI_DC40.missingLastFields: add
EDI_DC40.additionalLastFields:ignore
EDI_DC40.endSeparator: 'nl'
E2IDKU1.fieldFixedLengths: 30,3,16,6,6,2,3,35,35,3,3
E2IDKU1.keyFieldValue: E2IDKU1
E2IDKU1.fieldNames: SEGNAM,MANDT,DOCNUM,SEGNUM,PSGNUM,HLEVEL,BGMTYP,BGMNAME,BGMREF,BGMLEV,BGMACC
E2IDKU1.missingLastFields: add
E2IDKU1.additionalLastFields: ignore
E2IDKU1.endSeparator: 'nl'
E2IDKU1.keepIncompleteFields: yes
E2EDK03.fieldFixedLengths: 30,3,16,6,6,2,3,8,6
E2EDK03.keyFieldValue: yes
E2EDK03.fieldNames: SEGNAM,MANDT,DOCNUM,SEGNUM,PSGNUM,HLEVEL,IDDAT,DATUM,UZEIT
E2EDK03.missingLastFields: add
E2EDK03.additionalLastFields: ignore
E2EDK03.endSeparator: 'nl'
E2EDK03.keepIncompleteFields: yes
ignoreRecordSetName: true
The test file contents are as follows: (please note that I have pasted the file contents in this limited "Plain Text" field, the lines are wrapping around):
EDI_DC40 4000000000000000000700 302112233445566
E2IDKU1 100000000000000000000000100000001LBXLOCKBX 1
E2IDKU1 200000000000000000000000100000001LBXLOCKBX 1
E2EDK03 10000000000000000000000020000000201120081114092712
When I run the above file contents with the FCC RecordSet as follows, the Payload is empty and I receive a message that: Empty Document found. Proceed without sending message
RecordSet Structure: EDI_DC40, 1,E2IDKU1,,E2EDK03,
When I run the above file contents with the FCC RecordSet as follows, the Payload is correctly formed and I receive my message in the Integration Engine and can see it in SXMB_MONI:
RecordSet Structure: EDI_DC40, 1,E2IDKU1,2,E2EDK03,1
I want to be able to specify an asterisk "*" in RecordSet Structure as the file contents can vary for KeyFields E2IDKU1 and E2EDK03.
I have seen various messages in SDN referring to checking the File contents and FCC and I have already done so without any results. This feature has been widely used in PI. Is there a change in PI 7.0. We are currently running PI 7.0 / SP12. Please advise.
Channel <Channel Name>: Empty document found. Proceed without sending message.
Please note that as stated before that if I change the RecordSet Structure and DO NOT specify an asterisk "*", I do not get the "Empty document found message" and the message actually appears in Integration Engine with a payload.
Thanks in advance for your input.
Edited by: Ravinder Masuta on Nov 25, 2008 3:43 AM
Edited by: Ravinder Masuta on Nov 25, 2008 3:45 AM
Edited by: Ravinder Masuta on Nov 25, 2008 3:47 AM
Edited by: Ravinder Masuta on Nov 25, 2008 3:48 AM
i missed the asterick
RecordSet Structure: EDI_DC40,1,E2IDKU1,*,E2EDK03,*
If you give the above recordset structure, what is the result?
Similar Messages
-
FCC problem: Empty document found. Proceed without sending message
Hi all,
I am doing FCC to FCC scenario.
In that I am getting the following message in Communication channel Monitoring.
<b>Channel CC_File_FILBAS009_Sender</b>: Entire file content converted to XML format
<b>Channel CC_File_FILBAS009_Sender</b>: Empty document found. Proceed without sending message
File "/temp/xidelivery/send/FILBAS009_input.txt" archived after processing
and My File structure is as follows..
RS
-HEADER
Field1
Field2
Field3
-DATA
Field4
Field5
Field6
-TRAILER
Field7
Field8
Field9
FCC Parameters are:
RecordsetName : RS
HEADER.fieldFixedLengths : 5,1,5
HEADER.fieldNames : Field1,Field2,Field3
HEADER.keyFieldName : Field2
HEADER.keyFieldValue : 'H'
HEADER.endSeparator : 'nl'
In the same way I gave conversion parameters to DATA and TRAILER also.
Can any one tell me what is the problem?
Regards,
Pavanihi pavani,
excuse me about my previous reply.
I was just checking your FCC parameters. I see fieldseparator missing and also is it possible to paste sample input data.
I fieldsepartor is also not necessary since you have fiexedlengths. Since you say FCC to FCC and you paste the receiver FCC parameters
regards
Ramesh P
Message was edited by:
Ramesh P -
Error: Empty document found - proceed without sending message.
Hi,
I am using FCC in my Sender CC.
Error: Information Channel CC_XXXXXXXXXXXXXXXXXX: Converted complete file content to XML format.
Warning Channel CC_XXXXXXXXXXXX: Empty document found - proceed without sending message.
Thnaks,
SatyaHi,
Check this link.. Do you create input file similar to the link describe?
Empty document found. Proceed without sending message -
"Empty document Found" error while sending a text file
Below is the error I'm getting while I'm trying to send a txt file using a fiel adapter.
Channel FILE_TLE_Sender_SalesOrder_CC: Converted complete file content to XML format.
Channel FILE_TLE_Sender_SalesOrder_CC: Empty document found - proceed without sending message.
File "/data/TLE/XS1/inbound/850/Test_SalesOrder_3064_12-15-10.txt" deleted after processing.
On the Communication Channel this is what I have:
Recordset Name: DOCUMENT_ROOT
Recordset Structure: DOC_HEADER,1,PO_HEADER,1,TAX,,FREIGHT,,SPECIAL_SHIP,,DOCUMENT_NOTE,,SHIP_TO_ADDRESS,,PRODUCT,,LINE_SHIP,,LINE_ITEM_NOTE,,ASSOC_LINE,,ORDER_MEMO,,DOC_TRAILER,1
Key Field Name: keyfield
DOC_HEADER.fieldNames Value: keyfield,Source_System,Source_SUB_System,Source_Doc_Type,Source_Doc_Gen_Date,Source_Doc_Gen_Time,Source_Company,Source_Division,Source_Party_ID,Source_Ship_Location,Source_Sell_Location,Event_Name,Application_Program_File,Application_Program_Name,Destination_System,Destination_SUB_System,Destination_DOC_Type,Destination_Company,Destination_Division,Destination_Party_ID,Destination_Ship_Location,Destination_Sell_Location,Interchange_Control_Number,Group_Control_Number,Document_Control_Number,Date_Translated,Time_Translated,Primary_Key
DOC_HEADER.fieldFixedLengths Value: 30,30,30,30,10,4,30,15,30,20,20,8,30,30,30,30,30,30,15,30,20,20,10,10,10,10,4,30
DOC_HEADER.keyFieldValue Value: DOC_HEADER
DOC_HEADER.lastFieldsOptional Value: YES
DOC_HEADER.endSeparator Value: 'nl'
Then I have same pattern for PO_HEADER, TAX and so on....
Can someone tell me why this error is happening? I'm using the same exact parameters in another XI environment and there's no error there.> Channel FILE_TLE_Sender_SalesOrder_CC: Empty document found - proceed without sending message.
> Can someone tell me why this error is happening?
Maybe your source file is empty?
This is exact what the error message says. -
Receiver File Adapter - Empty document found error
Hi,
I have a slight issue that I do not understand.
For example, I have a file that is 256 bytes in size and definitely has some content. However, when the file adapter processes the file it says in the log "Empty document found" - but I can see the file has content.
Any ideas ? I am using using XI 3.0 SP19.
Cheers
Colin.hi colin,
i will agree with u,
may be the XI can not understand your test data,
can u tell me the language of test data.
In file adapter go to encoding select TEXT and UTF-8.
may be this will works.
regards
sandeep. -
Empty document found. Proceed without sending message
Hi All,
I have a file CC and it works fine , simple file.
But when I add Trailer to it... then I have no output file..Instead the CC channel shows that the document is empty and cannot proceed:
Here is the details ( Watch the Trailer added)
ZOUT_MT 11 -ZIN_MT 11
Recordset 1--1
Rec 1unboundedTest01 1-----unbounded
key(string) 1...1----
key 1..1(string)
name11(string) 1..1----
name21 1..1(string)
name12(string) 1..1----
name22 1..1(string)
Trail 1...1 -
Trail 1---1
key(string) 1..1 -
key 1..1(string)
test(string) 1...1 -
test1..1 (string)
In Config: Sender File CC
Doc Name :ZOUT_MT
Doc namspace : http://mytest.com/test1
RecordsetName : Recordset
Recordset Structure : Rec,*,Trail,1
Key Field Name : key
Recordset per message : 1
Rec.fieldNames : key,name11,name12
Rec.fieldSeparator : ,
Rec.endSeparator : 'nl'
Rec.processConfiguration: FromConfiguration
Rec.keyFieldValue : 1
Trail.fieldNames: key,test
Trail.endSeparator: 'nl'
Trail.processConfiguration : FromConfiguration
Trail.keyFieldValue : 1
Trail.fieldSeparator : ,
From all this work above , when I put the file having:
1,111,112
1,222,223
1,333,334
1,99
The output file in empty (null)...
Does anyone out there understand why the output file is becoming null..
here is the log I get in workbecnh (commuunication channel)
Audit Log for Message: c1a434f5-ad9f-4a26-08c1-e7d579a5927a
Time Stamp Status Description
21.01.2009 11:48:22 Success Channel ztest_sender_cc: Entire file content converted to XML format
21.01.2009 11:48:22 Warning Channel ztest_sender_cc: Empty document found. Proceed without sending message
21.01.2009 11:48:22 Success File "/mylocation/interface/SCM/somefolder/in/shilpagirlsinput.txt" deleted after processingkeyFieldValue must be different for Rec and Trail, keyfield is to distinguish Rec and Trail, their value must be different, otherwise how can you tell which record is Rec, and which is Trail?
Try to put different keyfield value, chang the input file and run the scenario.
Also because you specified cardinality 1...1 for Trail element, and 1 is used as keyfield for Rec, XI thinks there is no Trail in the outbound file, thus it produces empty document warning as Trail is required to be present by cardinality 1...1
Jayson -
Empty document found. Proceed without sending message - FCC error
Hi,
Getting the above error in sender file channel monitoring and cant seee message in moni.
My FCC parameter are
Record set structure: OrderHeader,,Item,
Sequence : ascending
Key field name : keyField
type: string-case insenitive
OrderHeader.fieldSeparator: ,
OrderHeader.fieldNames: SFA_Order_No,Order_Type,Order_Type,Dist_Channel,Division,Sales_District,Ship_To,Document_Date,Discount,IDENTIFIER,Delivery_Date,Sold_to_Party,Sold_to_Party
OrderHeader.keyFieldInStructure: add
OrderHeader.keyFieldValue: OrderHeader
OrderHeader.endSeparator: 'nl'
Item.fieldSeparator: ,
Item.fieldNames: SFA_Order_No,Material_No,Quantity,GIK_Flag
Item.keyFieldInStructure: add
Item.keyFieldValue: Item
Item.endSeparator: 'nl'
i dont have key field in my source strucure, so given Item.keyFieldInStructure: add
my source file is:
1000001,"Z001","RU ÍÎÂÈÊÎÂÀ ÀÍÍÀ","2999901553","20090803",25,0,"20090804",2999901553,""
1000002,"Z001","RU ÍÎÂÈÊÎÂÀ ÀÍÍÀ","2999901549","20090803",25,0,"20090804",2999901549,""
1000001,"80806730",1,1
1000001,"81200005",2,0
1000002,"90101446",1,1
1000002,"90194294",1,0
source DT strucute is:
can you please validate my FCC parameters?
Regards,
RashmiHi Rashmi,
Remove all this:
Key field name : keyField
OrderHeader.keyFieldInStructure: add
OrderHeader.keyFieldValue: OrderHeader
Item.keyFieldInStructure: add
Item.keyFieldValue: Item
and put this:
Key field name : SFA_Order_No
and test it.
Regards,
---Satish -
Mapping problem due to FCC in sender file adapter
Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
KEY VBELN
VBELN POSNR
E2E24* CHARG
KEY
POSNR
CHARG
<b>*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24</b>
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in <i>FCC ignoer record set= true</i>
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
0201
0202 in white fields
thanks & regards
Ashutosh Rawat<b>Source payload</b>
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b><VBELN>0083662685</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083662648</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083673936</VBELN></b> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
<b>at target what required is</b>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900001</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900002</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900003</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900004</POSNR>
</item>
<item>
<b><VBELN>0083662648</VBELN></b>
<POSNR>900011</POSNR>
</item>
<item>
<b><VBELN>0083673936</VBELN></b>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
ashutosh rawat -
Document merge problem due to embedded fonts
I am trying to merge 6 single page pdf documents into one pdf file.
I am receiving this error on two of the six docs:
"These documents contain subset fonts that have the same name and cannot be merged"
Can anyone help me work through this issue?
I am working with Adobe Acrobat 5.0.5 10/26/2001
Thank you
JoeI have exactly the same problem. How do I turn the subset off? Ticking off the option with percentages doesn't help.. What else could cause the problem? Please help, it's pretty urgent!
Thank you in advance,
Al -
Empty document in communication channel
Hi Expert!
I need your help. I have a problem with loading file with an old interface and I need to understand why...
No exist messagges about the error in monitor.
I only find the follow messagge in channel log:
Channel CC_123_ABC_Snd: Empty document found - proceed without sending message.
I've check all data convertion and are right. I suppose that the problem is in .xsl convertion file.
exist a method for debug the convertion?
Best regards
AnimaAnima ,
This is not an error.
The source file is not having any data in it and thats why the channel log shows
Channel CC_123_ABC_Snd: Empty document found - proceed without sending message.
Also the Comm Channel must be having tickmark for the field Process empty file checkbox (assuming FILE communication.) -
When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on executing javascript and raising errors.
What are the error messages you are seeing?
-
PDF saving problem CS6- empty document
Hello, can someone help me saving on my cs6 indesign to PDF? I've been having problems with it, the images sometimes do not apear, or it marks a mistake, and after i close it, its ok.
My real problem is that I did my thesis on InDesign, its about 180 pages with big format images, it has never let me save on PFD, in fact, it just saves it as an empty document.
PLEASE!!! Could someone help me? Im so nervous, I must print it already.
Thank you so much!Thank you for answering I saved my doc, but every time i tried saving it in PDF it would save/export as an empty document.
I tried to save it as a links doc, but it overwrote the original doc. and now I have like 2000 docs that are relinked to my original one. And i cant still save it on PDF -
Hi,
When i tried using the cancel PO API, it resulted in the following error.
Document control failed due to error in [DOCMGR-CANCEL], return code = [OTHER]
I searched the metalink and found out that it was a bug as p_doc_num variable was a number and in PO_HEADERS_ALL segment1 is VARCHAR2. But now the bug is fixed.
I tried both ways, with and without quotes but it is still giving this error. Please suggest.
I used the API in the following way.
DECLARE
l_return_status VARCHAR2(1);
BEGIN
fnd_global.apps_initialize(4480,20707,201);
--call the Cancel API
PO_Document_Control_PUB.control_document (
p_api_version=>1.0, -- p_api_version
p_init_msg_list=>FND_API.G_TRUE, -- p_init_msg_list
p_commit=>FND_API.G_TRUE, -- p_commit
x_return_status=>l_return_status,-- x_return_status
p_doc_type=>'PO', -- p_doc_type
p_doc_subtype=>'STANDARD', -- p_doc_subtype
p_doc_id=>34, -- p_doc_id
p_doc_num=>null, -- p_doc_num
p_release_id=>null, -- p_release_id
p_release_num=>null, -- p_release_num
p_doc_line_id=>null, -- p_doc_line_id
p_doc_line_num=>null, -- p_doc_line_num
p_doc_line_loc_id=>null, -- p_doc_line_loc_id
p_doc_shipment_num=>null, -- p_doc_shipment_num
p_action=>'CANCEL', -- p_action
p_action_date=>SYSDATE, -- p_action_date
p_cancel_reason=>null, -- p_cancel_reason
p_cancel_reqs_flag=>'N', -- p_cancel_reqs_flag
p_print_flag=>null, -- p_print_flag
p_note_to_vendor=>null ); -- p_note_to_vendor
commit;
-- Get any messages returned by the Cancel API
FOR i IN 1..FND_MSG_PUB.count_msg
LOOP
DBMS_OUTPUT.put_line(FND_MSG_PUB.Get(p_msg_index => i,
p_encoded => 'F'));
END LOOP;
END;
/first you have to assign org_id to the program,like fnd_client_info.set_org_context('167');
you also have to initialize,like this
fnd_global.initialize(session_id => l_session_id
,user_id => 2613
,resp_id => 50459
,resp_appl_id => 201
,security_group_id => 0
,site_id => -1
,login_id => 1102144
, --can't be -1,or else will be wrong
conc_login_id => 1102144
,prog_appl_id => -1
,conc_program_id => -1
,conc_request_id => -1
,conc_priority_request => NULL); -
Matrix Empty row Binding Problem
Hi ,
i created one matrix using screen painter.. all my columns are binded
with user defined fields.(Doc Rows Table). if my total row count is 5.
and i deleted 2 rows using rightclick deleterow event. after adding if i see the same document it display the 2 empty rows and 3 rows with my details.. actually its showing that deleted row also.my UDT also having empty row details..
how to resolve this?
Regards,
Ganesh KHi Geetha,
i think you misunderstood my scenario. while adding no empty rows
are displayed, even if i deleted some added row details.After adding,
while retriving the same document the problem occurs.if am not clear let me know..
As you told, beforeAction = false of Add will be new form with Add mode.so not possible to check that old matrix. otherwise we can delete the empty details from database using query..in beforeaction false pval.actionsucess true part...
regards,
Ganesh k. -
Salary Adjustment: No valid appraisal document found
Hi ,
For our ECM , We use 2 dimensional guideline(MBOA nd CRAT)
We are facing an issue of *Salary Adjustment: No valid appraisal document found * when we try to do compensation planning for employees..
Though the appraisal status is in completed status with ratings.
is it an authorisation problem?
Are we missing a link....
any inputs?
Tks Rgds
GHey Hayerk,
Please check the dates on which the system picks the appraisal rating.
For us , the validity dates were a mismatch. Pease ask your abaper to keep a break point in the badi HRECM00_MATRIX_SEGM-HRECM00_MATR_MBOAPPR
Check in view table V_T71ADM10, the eligibility key date.(ideally somewhere in june of the year if you are going to check for ratings for in the year)
And service seniority can be 6 months as per SENI in V_T71ADM13,
And also check your configuration in V_T71ADM14.
Have u maintained the correct template and the element IDs in the levels.
Hope this helps.
Let me know if you need more details
rgds
Gayathri
Maybe you are looking for
-
Need help repairing Driver - pic included.
Hey guys, i have been trying to get boot camp to work on my macbook for ages. First i got it to work, but then when i used windows, it wouldn't recognize my wireless in my macbook. Anyways, to make a long story short, i used the boot camp assistant t
-
How do I run a full process from SSIS ???
Hi all I run BPC 5.1 SP3, and I need to automate a series of jobs, but the system is giving me problems and I hope someone can help out. I need to automate a full optimize and then a full process of our AppSets. I know that in SP3, the Appsets are ta
-
With my Nokia I can call another mobile with a text like this: #status or #confort etc... I need it for an Allarm of the mountain's house. How can I do the same thing with my iphone? Thanks Miky
-
COM port are not shown in my applicatio​n
Hello, there is a reason why com ports are not shown on a Xp Embedded Touch Panel? I have to communicate through a serial port in my application but com ports are not shown in Visa Resource Name control ... I have included all VISA related things in
-
Table type in import parameter in rfc function module
Hi we don't have the table type in our system which exist in the other system which is the import parameter of the rfc function module.so how can we pass the parameter. shell we create the same table type in our system also.it is a table type for a d