Empty Log files not deleted by Cleaner
Hi,
we have a NoSql database installed on 3 nodes with a replication factor of 3 (see exact topology below).
We run a test which consisted in the following operations repeated in a loop : store a LOB, read it , delete it.
store.putLOB(key, new ByteArrayInputStream(source),Durability.COMMIT_SYNC, 5, TimeUnit.SECONDS);
store.getLOB(key,Consistency.NONE_REQUIRED, 5, TimeUnit.SECONDS);
store.deleteLOB(key, Durability.COMMIT_SYNC, 5, TimeUnit.SECONDS);
During the test the space occupied by the database continues to grow !!
Cleaner threads are running but logs these warnings:
2015-02-03 14:32:58.936 UTC WARNING [rg3-rn2] JE: Replication prevents deletion of 12 files by Cleaner. Start file=0x0 holds CBVLSN 1, end file=0xe holds last VLSN 24,393
2015-02-03 14:32:58.937 UTC WARNING [rg3-rn2] JE: Cleaner has 12 files not deleted because they are protected by replication.
2015-02-03 14:32:58.920 UTC WARNING [rg3-rn1] JE: Replication prevents deletion of 12 files by Cleaner. Start file=0x0 holds CBVLSN 1, end file=0xe holds last VLSN 24,393
2015-02-03 14:32:58.921 UTC WARNING [rg3-rn1] JE: Cleaner has 12 files not deleted because they are protected by replication.
2015-02-03 14:32:58.908 UTC WARNING [rg3-rn3] JE: Replication prevents deletion of 12 files by Cleaner. Start file=0x0 holds CBVLSN 1, end file=0xe holds last VLSN 24,393
2015-02-03 14:32:58.909 UTC WARNING [rg3-rn3] JE: Cleaner has 12 files not deleted because they are protected by replication.
2015-02-03 14:33:31.704 UTC INFO [rg3-rn2] JE: Chose lowest utilized file for cleaning. fileChosen: 0xc (adjustment disabled) totalUtilization: 1 bestFileUtilization: 0 isProbe: false
2015-02-03 14:33:32.137 UTC INFO [rg3-rn2] JE: CleanerRun 13 ends on file 0xc probe=false invokedFromDaemon=true finished=true fileDeleted=false nEntriesRead=1129 nINsObsolete=64 nINsCleaned=2 nINsDead=0 nINsMigrated=2 nBINDeltasObsolete=2 nBINDeltasCleaned=0 nBINDeltasDead=0 nBINDeltasMigrated=0 nLNsObsolete=971 nLNsCleaned=88 nLNsDead=0 nLNsMigrated=88 nLNsMarked=0 nLNQueueHits=73 nLNsLocked=0 logSummary=<CleanerLogSummary endFileNumAtLastAdjustment="0xe" initialAdjustments="5" recentLNSizesAndCounts=""> inSummary=<INSummary totalINCount="68" totalINSize="7570" totalBINDeltaCount="2" totalBINDeltaSize="254" obsoleteINCount="66" obsoleteINSize="7029" obsoleteBINDeltaCount="2" obsoleteBINDeltaSize="254"/> estFileSummary=<summary totalCount="2072" totalSize="13069531" totalINCount="68" totalINSize="7570" totalLNCount="1059" totalLNSize="13024352" maxLNSize="102482" obsoleteINCount="66" obsoleteLNCount="971" obsoleteLNSize="12974449" obsoleteLNSizeCounted="971" getObsoleteSize="13019405" getObsoleteINSize="7347" getObsoleteLNSize="12974449" getMaxObsoleteSize="13019405" getMaxObsoleteLNSize="12974449" getAvgObsoleteLNSizeNotCounted="NaN"/> recalcFileSummary=<summary totalCount="2072" totalSize="13069531" totalINCount="68" totalINSize="7570" totalLNCount="1059" totalLNSize="13024352" maxLNSize="0" obsoleteINCount="66" obsoleteLNCount="971" obsoleteLNSize="12974449" obsoleteLNSizeCounted="971" getObsoleteSize="13019405" getObsoleteINSize="7347" getObsoleteLNSize="12974449" getMaxObsoleteSize="13019405" getMaxObsoleteLNSize="12974449" getAvgObsoleteLNSizeNotCounted="NaN"/> lnSizeCorrection=NaN newLnSizeCorrection=NaN estimatedUtilization=0 correctedUtilization=0 recalcUtilization=0 correctionRejected=false
Log files are not delete even if empty as seen using DBSpace utility:
Space -h /mam2g/data/sn1/u01/rg2-rn1/env/ib/kvstore.jar com.sleepycat.je.util.Db
File Size (KB) % Used
00000000 12743 0
00000001 12785 0
00000002 12725 0
00000003 12719 0
00000004 12703 0
00000005 12751 0
00000006 12795 0
00000007 12725 0
00000008 12752 0
00000009 12720 0
0000000a 12723 0
0000000b 12764 0
0000000c 12715 0
0000000d 12799 0
0000000e 12724 1
0000000f 5717 0
TOTALS 196867 0
Here is the configured topology:
kv-> show topology
store=MMS-KVstore numPartitions=90 sequence=106
zn: id=zn1 name=MAMHA repFactor=3 type=PRIMARY
sn=[sn1] zn:[id=zn1 name=MAMHA] 192.168.144.11:5000 capacity=3 RUNNING
[rg1-rn1] RUNNING
single-op avg latency=4.414467 ms multi-op avg latency=0.0 ms
[rg2-rn1] RUNNING
single-op avg latency=1.5962526 ms multi-op avg latency=0.0 ms
[rg3-rn1] RUNNING
single-op avg latency=1.3068943 ms multi-op avg latency=0.0 ms
sn=[sn2] zn:[id=zn1 name=MAMHA] 192.168.144.12:6000 capacity=3 RUNNING
[rg1-rn2] RUNNING
single-op avg latency=1.5670061 ms multi-op avg latency=0.0 ms
[rg2-rn2] RUNNING
single-op avg latency=8.637241 ms multi-op avg latency=0.0 ms
[rg3-rn2] RUNNING
single-op avg latency=1.370075 ms multi-op avg latency=0.0 ms
sn=[sn3] zn:[id=zn1 name=MAMHA] 192.168.144.35:7000 capacity=3 RUNNING
[rg1-rn3] RUNNING
single-op avg latency=1.4707285 ms multi-op avg latency=0.0 ms
[rg2-rn3] RUNNING
single-op avg latency=1.5334034 ms multi-op avg latency=0.0 ms
[rg3-rn3] RUNNING
single-op avg latency=9.05199 ms multi-op avg latency=0.0 ms
shard=[rg1] num partitions=30
[rg1-rn1] sn=sn1
[rg1-rn2] sn=sn2
[rg1-rn3] sn=sn3
shard=[rg2] num partitions=30
[rg2-rn1] sn=sn1
[rg2-rn2] sn=sn2
[rg2-rn3] sn=sn3
shard=[rg3] num partitions=30
[rg3-rn1] sn=sn1
[rg3-rn2] sn=sn2
[rg3-rn3] sn=sn3
Why empty files are not delete by cleaner? Why empty log files are protected by replicas if all the replicas seam to be aligned with the master ?
java -jar /mam2g/kv-3.2.5/lib/kvstore.jar ping -host 192.168.144.11 -port 5000
Pinging components of store MMS-KVstore based upon topology sequence #106
Time: 2015-02-03 13:44:57 UTC
MMS-KVstore comprises 90 partitions and 3 Storage Nodes
Storage Node [sn1] on 192.168.144.11:5000 Zone: [name=MAMHA id=zn1 type=PRIMARY] Status: RUNNING Ver: 12cR1.3.2.5 2014-12-05 01:47:33 UTC Build id: 7ab4544136f5
Rep Node [rg1-rn1] Status: RUNNING,MASTER at sequence number: 24,413 haPort: 5011
Rep Node [rg2-rn1] Status: RUNNING,REPLICA at sequence number: 13,277 haPort: 5012
Rep Node [rg3-rn1] Status: RUNNING,REPLICA at sequence number: 12,829 haPort: 5013
Storage Node [sn2] on 192.168.144.12:6000 Zone: [name=MAMHA id=zn1 type=PRIMARY] Status: RUNNING Ver: 12cR1.3.2.5 2014-12-05 01:47:33 UTC Build id: 7ab4544136f5
Rep Node [rg3-rn2] Status: RUNNING,REPLICA at sequence number: 12,829 haPort: 6013
Rep Node [rg2-rn2] Status: RUNNING,MASTER at sequence number: 13,277 haPort: 6012
Rep Node [rg1-rn2] Status: RUNNING,REPLICA at sequence number: 24,413 haPort: 6011
Storage Node [sn3] on 192.168.144.35:7000 Zone: [name=MAMHA id=zn1 type=PRIMARY] Status: RUNNING Ver: 12cR1.3.2.5 2014-12-05 01:47:33 UTC Build id: 7ab4544136f5
Rep Node [rg1-rn3] Status: RUNNING,REPLICA at sequence number: 24,413 haPort: 7011
Rep Node [rg2-rn3] Status: RUNNING,REPLICA at sequence number: 13,277 haPort: 7012
Rep Node [rg3-rn3] Status: RUNNING,MASTER at sequence number: 12,829 haPort: 7013
Solved setting a non documented parameter " je.rep.minRetainedVLSNs"
The solution is described in NoSql forum: Store cleaning policy
Similar Messages
-
TGW on Linux - log files not deleting
I have been running TGW 3.5 for a few months on Linux and noticed the disk space is full. It seems the TGW logs are not clearing out. I have had to manually delete loads of log files.
From the logs there seems to be a process which checks how long the logs have been there but for some reason not deleting them.By design TGW doesn't clear out old log files thinking that it would help in troubleshooting. But we are planning to enhance it by clearing log files older than x number of days..
As you mentioned, the current fix is to manually clear out old log files. How often do you have to clear the logs ? Probably increasing available diskspace may help reduce iterations for cleaning up old logs ... -
Empty Log File - log settings will not save
Description of Problem or Question:
Cannot get logging to work in folder D:\Program Files\Business Objects\Dashboard and Analytics 12.0\server\log
(empty log file is created)
Product\Version\Service Pack\Fixpack (if applicable):
BO Enterorise 12.0
Relevant Environment Information (OS & version, java or .net & version, DB & version):
Server: windows Server 2003 Enterprise SP2.
Database Oracle 10g
Client : Vista
Sporadic or Consistent (if applicable):
Consistent
What has already been tried (where have you searched for a solution to your question/problem):
Searched forum, SMP
Steps to Reproduce (if applicable):
From InfoViewApp, logged in as Admin
Open ->Dashboard and Analytics Setp -> Parameters -> Trace
Check "Log to folder" and "SQL Queries", Click Apply.
Now, navigate away and return to this page - the "Log to folder" is unchecked. Empty log file is created.Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
Cannot connect to database because log file is deleted
Greetings,
I just recently cleaned up some junk files from my PC and didn't realize that an oracle log file got deleted. Therefore when I try to connect to the database I got the following error:
ORA-01033: ORACLE initialization or shutdown in progress
From sql plus, I try to shutdown and startup the database so that I know what kind of file that got deleted. So, how can I fix the problem?
regards,
valerie
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 18 11:46:46 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> startup
ORA-01031: insufficient privileges
SQL> connect firefly
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
SQL> connect sys/manager as sysdba
Connected.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 92278708 bytes
Database Buffers 50331648 bytes
Redo Buffers 2904064 bytes
Database mounted.
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1:
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL>Hi Hermant,
I'm not sure if it in archivelog mode or not. The following is the content of alert_xe:
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 10:53:16 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:698M/990M, Ph+PgF:1306M/1621M, VA:1945M/2047M
Fri Sep 18 10:53:16 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=4052
PSP0 started with pid=3, OS id=4048
MMAN started with pid=4, OS id=3220
DBW0 started with pid=5, OS id=3568
LGWR started with pid=6, OS id=3292
CKPT started with pid=7, OS id=3868
SMON started with pid=8, OS id=4004
RECO started with pid=9, OS id=3140
CJQ0 started with pid=10, OS id=2484
MMON started with pid=11, OS id=2840
MMNL started with pid=12, OS id=3348
Fri Sep 18 10:53:16 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 10:53:19 2009
alter database mount exclusive
Fri Sep 18 10:53:24 2009
Setting recovery target incarnation to 2
Fri Sep 18 10:53:25 2009
Successful mount of redo thread 1, with mount id 2578987615
Fri Sep 18 10:53:25 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 10:53:25 2009
alter database open
Fri Sep 18 10:53:27 2009
Beginning crash recovery of 1 threads
Fri Sep 18 10:53:28 2009
Started redo scan
Fri Sep 18 10:53:28 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2876.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 10:53:28 2009
Aborting crash recovery due to error 313
Fri Sep 18 10:53:28 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2876.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 10:53:33 2009
Starting ORACLE instance (normal)
Fri Sep 18 11:08:24 2009
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Sep 18 11:16:12 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:20:11 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:647M/990M, Ph+PgF:1346M/1621M, VA:1945M/2047M
Fri Sep 18 11:20:11 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=2696
PSP0 started with pid=3, OS id=2700
MMAN started with pid=4, OS id=2704
DBW0 started with pid=5, OS id=2708
LGWR started with pid=6, OS id=2712
CKPT started with pid=7, OS id=2716
SMON started with pid=8, OS id=2720
RECO started with pid=9, OS id=2724
CJQ0 started with pid=10, OS id=2728
MMON started with pid=11, OS id=2732
MMNL started with pid=12, OS id=2736
Fri Sep 18 11:20:11 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:20:20 2009
alter database mount exclusive
Fri Sep 18 11:20:26 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:20:27 2009
Successful mount of redo thread 1, with mount id 2579045300
Fri Sep 18 11:20:27 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:20:29 2009
alter database open
Fri Sep 18 11:20:32 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:20:33 2009
Started redo scan
Fri Sep 18 11:20:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2772.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:20:34 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:20:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2772.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:20:39 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:31:16 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:673M/990M, Ph+PgF:1371M/1621M, VA:1945M/2047M
Fri Sep 18 11:31:16 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=2740
PSP0 started with pid=3, OS id=2744
MMAN started with pid=4, OS id=2752
DBW0 started with pid=5, OS id=2756
LGWR started with pid=6, OS id=2760
CKPT started with pid=7, OS id=2764
SMON started with pid=8, OS id=2768
RECO started with pid=9, OS id=2772
CJQ0 started with pid=10, OS id=2776
MMON started with pid=11, OS id=2780
MMNL started with pid=12, OS id=2784
Fri Sep 18 11:31:16 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:31:21 2009
alter database mount exclusive
Fri Sep 18 11:31:26 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:31:27 2009
Successful mount of redo thread 1, with mount id 2579028809
Fri Sep 18 11:31:27 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:31:27 2009
alter database open
Fri Sep 18 11:31:28 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:31:28 2009
Started redo scan
Fri Sep 18 11:31:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2816.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:31:29 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:31:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2816.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:31:34 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:40:56 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:656M/990M, Ph+PgF:1371M/1621M, VA:1945M/2047M
Fri Sep 18 11:40:56 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=2612
PSP0 started with pid=3, OS id=2616
MMAN started with pid=4, OS id=2624
DBW0 started with pid=5, OS id=2628
LGWR started with pid=6, OS id=2632
CKPT started with pid=7, OS id=2636
SMON started with pid=8, OS id=2640
RECO started with pid=9, OS id=2644
CJQ0 started with pid=10, OS id=2648
MMON started with pid=11, OS id=2652
MMNL started with pid=12, OS id=2656
Fri Sep 18 11:40:57 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:40:59 2009
alter database mount exclusive
Fri Sep 18 11:41:04 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:41:05 2009
Successful mount of redo thread 1, with mount id 2579051403
Fri Sep 18 11:41:05 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:41:05 2009
alter database open
Fri Sep 18 11:41:06 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:41:07 2009
Started redo scan
Fri Sep 18 11:41:07 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2692.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:41:07 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:41:07 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2692.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:41:11 2009
Starting ORACLE instance (normal)
Shutting down instance: further logons disabled
Fri Sep 18 11:43:19 2009
Stopping background process CJQ0
Fri Sep 18 11:43:19 2009
Stopping background process MMNL
Fri Sep 18 11:43:19 2009
Stopping background process MMON
Fri Sep 18 11:43:19 2009
Shutting down instance (immediate)
License high water mark = 1
Fri Sep 18 11:43:19 2009
Stopping Job queue slave processes
Fri Sep 18 11:43:19 2009
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Fri Sep 18 11:43:20 2009
alter database close normal
ORA-1109 signalled during: alter database close normal...
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:43:27 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:708M/990M, Ph+PgF:1375M/1621M, VA:1945M/2047M
Fri Sep 18 11:43:27 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=3168
PSP0 started with pid=3, OS id=3172
MMAN started with pid=4, OS id=3176
DBW0 started with pid=5, OS id=3180
LGWR started with pid=6, OS id=3184
CKPT started with pid=7, OS id=3188
SMON started with pid=8, OS id=3192
RECO started with pid=9, OS id=3196
CJQ0 started with pid=10, OS id=3200
MMON started with pid=11, OS id=3204
MMNL started with pid=12, OS id=3208
Fri Sep 18 11:43:28 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:43:28 2009
alter database mount exclusive
Fri Sep 18 11:43:32 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:43:32 2009
Successful mount of redo thread 1, with mount id 2579057184
Fri Sep 18 11:43:32 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:43:33 2009
alter database open
Fri Sep 18 11:43:34 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:43:34 2009
Started redo scan
Fri Sep 18 11:43:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3240.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:43:34 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:43:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3240.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:43:38 2009
Starting ORACLE instance (normal)
Fri Sep 18 11:47:55 2009
Shutting down instance: further logons disabled
Fri Sep 18 11:47:55 2009
Stopping background process CJQ0
Fri Sep 18 11:47:55 2009
Stopping background process MMNL
Fri Sep 18 11:47:55 2009
Stopping background process MMON
Fri Sep 18 11:47:55 2009
Shutting down instance (immediate)
License high water mark = 1
Fri Sep 18 11:47:55 2009
Stopping Job queue slave processes
Fri Sep 18 11:47:55 2009
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S001' to die
All dispatchers and shared servers shutdown
Fri Sep 18 11:47:56 2009
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Fri Sep 18 11:47:56 2009
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Sep 18 11:48:23 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 146800640
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 50331648
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 31457280
PMON started with pid=2, OS id=3628
PSP0 started with pid=3, OS id=3632
MMAN started with pid=4, OS id=3636
DBW0 started with pid=5, OS id=3640
LGWR started with pid=6, OS id=3644
CKPT started with pid=7, OS id=3648
SMON started with pid=8, OS id=3652
RECO started with pid=9, OS id=3656
CJQ0 started with pid=10, OS id=3660
MMON started with pid=11, OS id=3664
MMNL started with pid=12, OS id=3668
Fri Sep 18 11:48:24 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:48:24 2009
ALTER DATABASE MOUNT
Fri Sep 18 11:48:29 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:48:29 2009
Successful mount of redo thread 1, with mount id 2579048520
Fri Sep 18 11:48:29 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Sep 18 11:48:29 2009
ALTER DATABASE OPEN
Fri Sep 18 11:48:29 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:48:29 2009
Started redo scan
Fri Sep 18 11:48:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3708.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:48:29 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:48:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3708.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: ALTER DATABASE OPEN...
Fri Sep 18 11:53:41 2009
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup. -
What log files can delete in RAC?
Hi,
I have a little question, what log files can delete?
$ORA_CRS_HOME/log/hostname/client ?
And what others?
MiguelSome logs are automatically purged and some not: see http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/appsupport.htm#BEHJHGJD.
Trace files (.trc) that can be created in same directories are not purged automatically. -
BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED
Hello,
To generate the log report, /VIRSA/ZVFATBAK program is scheduled on hourly basis but some time report doesn't get generated and if we see the background job then it shows sucessfully finished.
If we see the maually the log report for FFID then below error message is displayed.
" BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED"
Can anyone guide me to solve the issue.
Thanks in advance.
Best Regards,
Prashant DubeyHi,
once chk the status of the job by selecting that and check job status(cltr+shift_f12)
since it was periodically scheduled job there will be a RELEASED job after every active job..
so try to copy that into another job using copy option and give some new name which u have to remember...
the moment u copy u can find the same copied job in SCHEDULED status...
from here, try to run it again on hourly basis....
After copying the job u can unschedule the old released job to scheduled otherwise 2 will run at a time...
rgds, -
Getting empty log files with log4j and WebLogic 10.0
Hi!
I get empty log files with log4j 1.2.13 and WebLogic 10.0. If I don't run the application in the application server, then the logging works fine.
The properties file is located in a jar in the LIB folder of the deployed project. If I change the name of the log file name in the properties file, it just creates a new empty file.
What could be wrong?
Thanks!I assume that when you change the name of the expected log file in the properties file, the new empty file is that name, correct?
That means you're at least getting that properties file loaded by log4j, which is a good sign.
As the file ends up empty, it appears that no logger statements are being executed at a debug level high enough for the current debug level. Can you throw in a logger.error() call at a point you're certain is executed? -
Empty/underutilized log files not removed
I have an application that runs the cleaner and the checkpointer explicitly (instead of relying on the database to do it).
Here are the relevant environment settings: je.env.runCheckpointer=false, je.env.runCleaner=false, je.cleaner.minUtilization=5, je.cleaner.expunge=true.
When running the application, I noticed that the few dozen log files have been removed, but later (even the cleaner was executed at regular intervals), no more log files were removed.
I have run the DbSpace utility on the environment and found the following result:
File Size (KB) % Used
00000033 97656 0
00000034 97655 0
00000035 97656 0
00000036 97656 0
00000037 97656 0
00000038 97655 2
00000039 97656 0
0000003a 97656 0
0000003b 97655 0
0000003c 97655 0
0000003d 97655 0
0000003e 97655 0
0000003f 97656 0
00000040 97655 0
00000041 97656 0
00000042 97656 0
00000043 97656 0
00000044 97655 0
00000045 97655 0
00000046 97656 0
This goes on for a long time. I had the database tracing enabled at CONFIG level. Here are the last lines of the log just before the last log file (0x32) is removed:
2009-05-06 08:41:51:111:CDT INFO CleanerRun 49 on file 0x30 begins backlog=2
2009-05-06 08:41:52:181:CDT SEVERE CleanerRun 49 on file 0x30 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206347 nINsObsolete=6365 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199971 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:41:52:182:CDT INFO CleanerRun 50 on file 0x31 begins backlog=1
2009-05-06 08:41:53:223:CDT SEVERE CleanerRun 50 on file 0x31 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205475 nINsObsolete=6319 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199144 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:41:53:224:CDT INFO CleanerRun 51 on file 0x32 begins backlog=0
2009-05-06 08:41:54:292:CDT SEVERE CleanerRun 51 on file 0x32 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205197 nINsObsolete=6292 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198893 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:42:24:300:CDT INFO CleanerRun 52 on file 0x33 begins backlog=1
2009-05-06 08:42:24:546:CDT CONFIG Checkpoint 963: source=api success=true nFullINFlushThisRun=13 nDeltaINFlushThisRun=0
2009-05-06 08:42:24:931:CDT SEVERE Cleaner deleted file 0x32
2009-05-06 08:42:24:938:CDT SEVERE Cleaner deleted file 0x31
2009-05-06 08:42:24:946:CDT SEVERE Cleaner deleted file 0x30
Here are a few log lines right after the last log message with cleaner deletion (until the next checkpoint):
2009-05-06 08:42:25:339:CDT SEVERE CleanerRun 52 on file 0x33 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204164 nINsObsolete=6277 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=197865 nLNsCleaned=11 nLNsDead=0 nLNsMigrated=0 nLNsMarked=11 nLNQueueHits=9 nLNsLocked=0
2009-05-06 08:42:25:340:CDT INFO CleanerRun 53 on file 0x34 begins backlog=0
2009-05-06 08:42:26:284:CDT SEVERE CleanerRun 53 on file 0x34 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=203386 nINsObsolete=6281 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=197091 nLNsCleaned=2 nLNsDead=2 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:42:56:290:CDT INFO CleanerRun 54 on file 0x35 begins backlog=4
2009-05-06 08:42:57:252:CDT SEVERE CleanerRun 54 on file 0x35 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205497 nINsObsolete=6312 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199164 nLNsCleaned=10 nLNsDead=3 nLNsMigrated=0 nLNsMarked=7 nLNQueueHits=6 nLNsLocked=0
2009-05-06 08:42:57:253:CDT INFO CleanerRun 55 on file 0x39 begins backlog=4
2009-05-06 08:42:58:097:CDT SEVERE CleanerRun 55 on file 0x39 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204553 nINsObsolete=6301 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198238 nLNsCleaned=2 nLNsDead=0 nLNsMigrated=0 nLNsMarked=2 nLNQueueHits=1 nLNsLocked=0
2009-05-06 08:42:58:098:CDT INFO CleanerRun 56 on file 0x3a begins backlog=3
2009-05-06 08:42:59:261:CDT SEVERE CleanerRun 56 on file 0x3a invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204867 nINsObsolete=6270 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198586 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:42:59:262:CDT INFO CleanerRun 57 on file 0x36 begins backlog=2
2009-05-06 08:43:02:185:CDT SEVERE CleanerRun 57 on file 0x36 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206158 nINsObsolete=6359 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199786 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:02:186:CDT INFO CleanerRun 58 on file 0x37 begins backlog=2
2009-05-06 08:43:03:243:CDT SEVERE CleanerRun 58 on file 0x37 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206160 nINsObsolete=6331 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199817 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:03:244:CDT INFO CleanerRun 59 on file 0x3b begins backlog=1
2009-05-06 08:43:04:000:CDT SEVERE CleanerRun 59 on file 0x3b invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206576 nINsObsolete=6385 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=200179 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:04:001:CDT INFO CleanerRun 60 on file 0x38 begins backlog=0
2009-05-06 08:43:08:180:CDT SEVERE CleanerRun 60 on file 0x38 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205460 nINsObsolete=6324 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=194125 nLNsCleaned=4999 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=4999
2009-05-06 08:43:08:224:CDT INFO CleanerRun 61 on file 0x3c begins backlog=0
2009-05-06 08:43:09:099:CDT SEVERE CleanerRun 61 on file 0x3c invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206589 nINsObsolete=6343 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=200235 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:24:548:CDT CONFIG Checkpoint 964: source=api success=true nFullINFlushThisRun=12 nDeltaINFlushThisRun=0
I could not see anything fundamentally different between the log messages when log files were removed and when they were not. The DbSpace utility confirmed that there are plenty of log files under the minimum utilization, so I can't quite explain while the log file removal stopped all of a sudden.
Any help would be appreciated (JE version: 3.3.75).Hi Bertold,
My first guess is that one or more transactions have accidentally not been ended (committed or aborted), or cursors not closed.
A clue is the nLNsLocked=4999 in the second set of trace messages. This means that 4999 records were locked by your application and were unable to be migrated by the cleaner. The cleaner will wait until these record locks are released before deleting any log files. Records locks are held by transactions and cursors.
If this doesn't ring a bell and you need to look further, one thing you can do is print the EnvironmentStats periodically (System.out.println(Environment.getStats(null))). Take a look at the nPendingLNsProcessed and nPendingLNsLocked. The former is the number of records the cleaner attempts to migrate because they were locked earlier. The latter is the number that are still locked and cannot be migrated.
--mark -
How to recover the database when some of the archive log file get deleted.
I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AMHi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss. -
Files not deleted on windows in MappedBufferManager
We are seeing a problem where the nio file-based scheme does not delete the mapped temporary files once they are inactive. This is related to the link below; however, this is not just a problem when the process exits.
Re: nio file manager does not clean up page files on Windows
Given this caching scheme:
<caching-schemes>
<paged-external-scheme>
<scheme-name>nio-scheme</scheme-name>
<page-limit>5</page-limit>
<nio-file-manager>
<initial-size>8m</initial-size>
<maximum-size>64m</maximum-size>
<directory>c:/temp/nio/</directory>
</nio-file-manager>
<page-duration>10s</page-duration>
<high-units>20000</high-units>
<expiry-delay>20h</expiry-delay>
</paged-external-scheme>
</caching-schemes>
The old files are not deleted once we cross the page limit boundary. So the directory will grow indefinitely large as the old files are not removed. We get this error:
MappedBufferManager: failed to remove <path to file>
Note, I added a note to the original posting, but was not sure if it was received since that post was so old. Lastly, this problem appears to be windows-only since the code works as expected on a linux distro using a sun jdk.
We are using JDK 5.0 (build 1.5.0_15-b04) and Coherence 3.2.
/thanks -warrenI had similar problems. I could always mount the directory but couldn't see any of the files. I finally tracked the problem down to the user name I was using to login from the Mac being in a different XP security group than I had assumed. Once I changed the group membership, it worked as it should.
The solution took awhile to find because my XP laptop is also used on my work LAN and therefore uses "professional" sharing not "simple" sharing. Professional sharing is much more complicated to troubleshoot. You have professional sharing on your XP machine if you see a "permissions" button on the share tab when you click properties on the file/directory.
Here a two good links that might help.
If you have professional sharing:
http://www.practicallynetworked.com/sharing/xp_filesharing/index.htm
If you have simple sharing:
http://www.practicallynetworked.com/sharing/xp/filesharing.htm
Good luck. My apologies if this is too basic for you but I've been working with computers since the early 1970's and still find networking a pain to configure. -
Archive Logs Will Not Delete from OS
Hi Everyone,
Here's my issue. Somehow i have a few archivelogs that are corruptued, plus a backup of the database that is corrupted. Since then, I have made a new backup of the database and everything is running smoothly. WHen i try to delete the files from DISK (which i cannot delete), i get this error: CANNOT DELETE <file_name>: The file or directory is corrupted and unreadable. I try to search for the corrupted files in rman, but i get this message "specification does not match any archived log in the recovery catalog". It seems that rman doesn't recognize that the files exist.
I go to the alert log and I have this error:
Corrupt block seq: 10511 blocknum=1.
Bad header found during deleting archived log
Data in bad block - seq:0. bno:0. time:0
beg:0 cks:0
calculated check value: 0
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
Reread of seq=10511, blocknum=1, file=APP\ORACLE\FLASH_RECOVERY_AREA\PPROD\ARCHIVELOG\2010_11_04\O1_MF_1_10511_6F5SOFC7_.ARC, found same corrupt data
I would really appreciate some help to delete these files from the OS. Thanks in advance to anyone that can help.RMAN> Change Archivelog All Validate;
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=363 device type=DISK
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_04\O1_MF_1_10514_6F6SJ9D6_.ARC RECID=11389 STAMP=734220234
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_07\O1_MF_1_10546_6FDRCHQX_.ARC RECID=11421 STAMP=734412064
validation succeeded for archived log
archived log file name=\APP\ORACLE\FLASH_RECOVERY_AREAPPROD\ARCHIVELOG\2010_11_07\O1_MF_1_10556_6FGTGZNJ_.ARC RECID=11431 STAMP=734479760
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_07\O1_MF_1_10557_6FGX6CG5_.ARC RECID=11432 STAMP=734482556
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_07\O1_MF_1_10558_6FGZ9SLK_.ARC RECID=11433 STAMP=734484714
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10559_6FH12R00_.ARC RECID=11434 STAMP=734486537
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10560_6FH6OJRW_.ARC RECID=11435 STAMP=734492259
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10561_6FHL3J98_.ARC RECID=11436 STAMP=734503969
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10562_6FHTF2QX_.ARC RECID=11437 STAMP=734512468
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10563_6FJ32ZSD_.ARC RECID=11438 STAMP=734521361
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10564_6FJB1OMK_.ARC RECID=11439 STAMP=734528486
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10565_6FJJH3TV_.ARC RECID=11440 STAMP=734535062
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10566_6FJKJ6PY_.ARC RECID=11441 STAMP=734536118
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10567_6FJV244W_.ARC RECID=11442 STAMP=734545911
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10568_6FK5BMYR_.ARC RECID=11443 STAMP=734556421
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10569_6FK68QRW_.ARC RECID=11444 STAMP=734557384
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10570_6FKDM74D_.ARC RECID=11445 STAMP=734563863
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10571_6FKGK4LK_.ARC RECID=11446 STAMP=734565848
validation failed for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_08\O1_MF_1_10572_6FKH42MK_.ARC RECID=11447 STAMP=734566452
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10573_6FKOQX6C_.ARC RECID=11448 STAMP=734573238
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10574_6FKVHC8S_.ARC RECID=11449 STAMP=734579100
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10575_6FL6T300_.ARC RECID=11450 STAMP=734590708
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10576_6FLJ3NMK_.ARC RECID=11451 STAMP=734600229
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10577_6FLO72K2_.ARC RECID=11452 STAMP=734605459
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10578_6FLTF31G_.ARC RECID=11453 STAMP=734610772
validation succeeded for archived log
archived log file name=APP\ORACLE\FLASH_RECOVERY_AREA\PROD\ARCHIVELOG\2010_11_09\O1_MF_1_10579_6FM1N500_.ARC RECID=11454 STAMP=734618166
Crosschecked 26 objects -
Files not deleting on Western Digital My Book Mac
Hello,
I recently deleted some time machine backups on my western digital my book mac. Unfortunately these files was not been deleted from the drive (the remaining disk space has not gone up circa 300GB). I have looked online and the issues seems to be the afp connection rather than using the smb connection.
I have reconnected using this type, but I am still unable to see the files to delete. I have tried to connect using terminal, but to be honest I have no idea what I am doing. The file path is smb://WubberTimeCapsule.smb.tcp.local/My%20Book...
Has anybody else seem this problem also, does anybody know of a way of deleting these files?leedern wrote:
Thanks, it is an external hdd (Western Digital My Book Mac) connected to my old time machine (too small to fit everything on way) via the usb cable. The time machine is connected wirelessly to my network. Unfortunately I can not see the sparse bundle files anymore.
Just for the sake of clarification, that's a +Time Capsule,+ Apple hardware combining a wireless router and hard drive. +Time Machine+ is the Apple software that does backups, to various destinations, including +Time Capsules.+
This originated because I originally created the time machine backup with the external hdd connected directly to the mac. When I transferred the disk to the old time machine, it did not reuse the previous backup but created a new one. Hence in my ignorance I deleted the old files.
Ah, yes, that's a different critter. Time Machine stores backups differently when they're done directly vs. over a network. The backups done directly were stored in a Backups.backupdb folder at the top level of the drive; the ones done over your network have that folder placed inside an odd container called a +sparse bundle.+ You cannot switch back and forth.
Which ones did you delete, and how?
It sounds like you deleted the Backups.backupdb folder, and didn't empty the trash, so they're still in the (hidden) trash folder on that drive. If so, disconnect it from your TC via +Airport Utility > Disks,+ connect it to your Mac, and empty the trash. That will take a very long time, as there are at least a few hundred thousand files there, perhaps many more.
A quick alternative would be to simply erase the drive, via Disk Utility, while it's connected to your Mac. That will erase all the new and old backups. If you just started the new set, that might be easiest.
If you decide to do that, see the green box in #Q2 of [Using Time Machine with a Time Capsule|http://web.me.com/pondini/TimeMachine/TimeCapsule.html] (or use the link in *User Tips* at the top of the +Time Capsule+ forum), for a way to speed up the first full backup. -
TPS and TPDF Files Not Deleted by Distiller
I just upgraded from Acrobat 6.0 to 8.0. Now when I save a FrameMaker book to PDF, Distiller does not delete the TPDF and TPS files. Does anyone know why this is happening and what I can do about it?
Thanks,
Stephen LiddiardWhen you save a FrameMaker book as a PDF file, (File > Save Book As) FrameMaker creates a temporary PostScript file with a file type extension of TPS. After it has finished writing the TPS file, FrameMaker invokes Distiller to process the TPS file into a PDF file. As part of the process of turning the TPS file into a PDF file, Distiller creates a temporary PDF file with a file type extension of TPDF.
With version 6 and earlier versions, Distiller cleaned up after itself by deleting these files. With version 8, it leave these files behind.
I'd like to know if this is a bug or if it's a new feature. If it's the latter, I'd like to know how to disable it so that Distiller goes back to cleaning up its junk.
(I am using FrameMaker 7.0)
Regards
Stephen Liddiard -
Hi all,
After housekeeping of job logs via report RSBTCDEL2, the job logs are deleted in SAP but temse files in unix are not deleted. Temse consistency check does not indicate any problem, what could be the cause?Hi,
Please check this thread
Missing job log
Regards,
Subodh -
May [date]IMAPMailboxSyncEngine.log files be deleted without losing emails?
Problem description:
[date]IMAPMailboxSyncServices.log makes large logs almost every day. May the log files with older dates be deleted w/o affecting the email files?
EtreCheck version: 2.2 (132)
Report generated 4/26/15, 8:50 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Click to remove] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 448 - SN = D86130303H6DGDLAG
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
Color LCD 1680 x 1050
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 1:48:27
Disk Information: ℹ️
M4-CT512M4SSD2 disk0 : (512.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
SSD 512 (disk1) / [Startup]: 510.88 GB (10.86 GB free) (Low!)
Core Storage: disk0s2 511.25 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
SanDisk ImageMate 8 in 1
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.2.0 28956 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.netbridge (10.2.0 28956 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.usbconnect (10.2.0 28956 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.vnic (10.2.0 28956 - SDK 10.7) [Click for support]
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) [Click for support]
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) [Click for support]
[not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) [Click for support]
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.0) [Click for support]
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
/System/Library/Extensions/Belcarra.USBLAN_netpart.kext/Contents/PlugIns
[not loaded] com.belcarra.iokit.netpart.panther (1.6.1) [Click for support]
/System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/Contents/PlugIns
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) [Click for support]
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) [Click for support]
/System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext/Contents/PlugIns
[not loaded] com.RemoteControl.USBLAN.panther (1.6.1) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[running] com.epson.epw.agent.plist [Click for support]
[failed] com.epson.eventmanager.agent.plist [Click for support] [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.kodak.BonjourAgent.plist [Click for support]
[running] com.logmein.logmeingui.plist [Click for support]
[not loaded] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
[failed] com.opendns.osx.DNSCryptMenuBar.plist [Click for support] [Click for details]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
[running] com.sophos.uiserver.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[not loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[not loaded] com.logmein.logmeinserver.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.opendns.osx.DNSCryptConfigUpdater.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
[running] com.sophos.common.servicemanager.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
[loaded] org.cindori.AuthHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
[running] com.google.Chrome.framework.plist [Click for support]
[loaded] com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
[loaded] com.kodak.KODAK AiO Software Updater.plist [Click for support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
[running] com.nds.pcshow.plist [Click for support]
[loaded] com.nds.pcshow.uninstall.plist [Click for support]
[running] com.parallels.mobile.startgui.launchagent.plist [Click for support]
[loaded] uk.co.markallan.clamxav.clamscan.plist [Click for support]
[loaded] uk.co.markallan.clamxav.freshclam.plist [Click for support]
User Login Items: ℹ️
Garmin Lifetime Map Updater Application (/Applications/Garmin Lifetime Map Updater.app)
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
ClipMenu Application (/Applications/ClipMenu.app)
ClamXav Sentry UNKNOWN (missing value)
TuneupMyMac UNKNOWN (missing value)
ClamXav Application (/Applications/ClamXav.app)
ClamXav Sentry Application (/Applications/ClamXav.app/Contents/Resources/ClamXav Sentry.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
LogitechDeviceDetection: Version: 1.0.0.76 - SDK 10.7 [Click for support]
LogMeInSafari64: Version: 1.0.730 [Click for support]
o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Click for support]
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.730 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeInSafari32: Version: 1.0.730 [Click for support]
googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.13 [Click for support]
CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Click for support]
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 [Click for support]
SharePointBrowserPlugin: Version: Unknown
DirectorShockwave: Version: 12.1.2r152 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
Open in Internet Explorer
Searchme Adware! [Click to remove]
Slick Savings Adware! [Click to remove]
Amazon Shopping Assistant Adware! [Click to remove]
Ebay Shopping Assistant Adware! [Click to remove]
3rd Party Preference Panes: ℹ️
DNSCrypt [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Growl [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Destinations:
Alvin Lundgren's Time Capsu [Network]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
13% WindowServer
3% iPhoto
2% Google Chrome Helper(40)
2% com.apple.WebKit.Plugin.64
2% Mail
Top Processes by Memory: ℹ️
1.92 GB Google Chrome Helper(40)
737 MB kernel_task
295 MB clamd
270 MB Disk Inventory X
262 MB com.apple.WebKit.WebContent(5)
Virtual Memory Information: ℹ️
55 MB Free RAM
7.94 GB Used RAM
40 MB Swap Used
Diagnostics Information: ℹ️
Apr 26, 2015, 07:13:08 PM /Library/Logs/DiagnosticReports/Finder_2015-04-26-191308_[redacted].cpu_resourc e.diag [Click for details]
Apr 26, 2015, 07:02:09 PM /Users/[redacted]/Library/Logs/DiagnosticReports/DNSCrypt-Menubar_2015-04-26-19 0209_[redacted].crash
Apr 26, 2015, 07:00:45 PM Self test - passed
Apr 25, 2015, 06:58:38 AM /Library/Logs/DiagnosticReports/LegacyFileVaultMessageTracer_2015-04-25-065838_ [redacted].crashWhen you have a question, it's best just to ask, without posting reams of irrelevant information that no one asked for, especially if it comes from "etrecheck."
From the Mail menu bar, select
Window ▹ Connection Doctor
In the window that opens, uncheck the box marked
Log Connection Activity
Maybe you are looking for
-
Modifying hover over information in thumbnail view in SharePoint 2013
I am looking for a solution to be able to change hover over information in thumbnail view of the picture library in SharePoint 2013 replacing the Name/Title caption with a different field ( in my case it is "Source ID"). Can any one help me with that
-
ITunes crashed...library is lost
iTunes (11.0.1) was not responding so I force quit it. When I went re-open it I got an 'unable to open...unknown error' message. I rebooted my computer and when I opened iTunes I got some sort of library error. I don't remember what it said. Now
-
Hello. I'm using an iSight with MacMini. I can to make the iSight output available to anyone via the web. The idea is to use the "built-in" webserver (Sites folder), but can't seem to work this out. Any easier suggestions also welcome. m
-
New ipod, battery low and it makes noise, like a wheel spinning inside
I tried to charge the battery for several hours. then tried to register ipod on computer. did not get past the fromatting screen. then followed directions to reset. it did not work., went back to low battery on screen. I'm afraid to leave it plugged
-
I was prompted to update adobe. but the message appearing saying"fatal error" 1603.
I get a message saying "fatal error" 1603 when trying to update adobe. How do I go about rresolving the problem?