Emulator for HDInsights 3.2?

Does anyone know when the emulator for HDInsights 3.2 will be released? It would be nice to have HBase and Storm in the emulator. Required in fact for many customer demos.
- SteveN

Hi Xiaoyong,
I'm also quite keen to develop against a HDInsight 3.2 emulator. Are you able to share any high level timelines by any chance (e.g. Q2, Q3)?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter:
@nimblelearn

Similar Messages

How do I set up an emulator for testing my application?

I'm starting to wade into GPIB and cannot seem to find the best way to continue given all the components (not meaning ActiveX) required to assemble a semi-reliable development and testing environment for beta rollouts.
I have set up my design environment. Now I need a way to emulate some of the equipment I will be developing for so that I may test my apps before final testing on the actual equipment (which I obviously have no access to at this point).
Given that.. am I correct in understanding that LabView or IVI allows this type of functionality? If so, here are my specific questions regarding development:
1) Do I currently need any hardware or can the GPIB device list be populated from IVI/LabView emula
tors? In other words... how do I make the 'link' between these two technologies?
2) Can IVI/LabView run on the same machine as my test application, or is a secondary machine required?
3) Is there a general punch list of software (LabView, etc.) I might need in order to get this going?
4) Any general (or specific) overviews that may help me get over this hump would be greatly appreciated.
Charles

Whether or not you are able to simulate your hardware will depend on what method you are using to program it. If you are programming the instrumentation directly using the GPIB ActiveX control or GPIB calls directly you will not have the ability to do simulate in software. If you are using an instrument driver, however, you will be able to do simulation if the instrument driver is IVI compliant.
Assuming that you are using an IVI-compliant instrument driver, here are the answers to your questions:
1. You do not need any hardware whatsoever. You can either specify to use simulation in your code by using the InitWithOptions functionality and specifying "SIMULATE=TRUE" in the option string parameter. You can also set things up externally so that you can alter simulation strictly through the IVI configuration so that your code doesn't have to change.
2. It will run on the same machine as your code. As far as your application is concerned, it will not appear any differently however no GPIB communication will occur.
3. IVI compliant instrument drivers for all of the GPIB hardware you are using. These are available for download from ni.com.
4. I think that there may be some IVI-related application notes.
Assuming that you are not using an IVI-compliant instrument driver and instead are either using a non-IVI instrument driver or making GPIB calls directly, things can get a little more elaborate. If you want full emulation capability you'll need to write another piece of software that emulates your device. This can be done in LabVIEW or any other ADE of your choice. What you'll need is a second GPIB card (to act as your device) that you'll cable to from your main computer. That card can live in a second machine or in the same one as your main application. You may want to put it in a separate test machine just to keep things a little cleaner.
If you go with this approach, it's not too difficult to write an emulator for a single device (or at least that functionality of a device that you use) per GPIB card. It will be more difficult to write an emulator that emulates multiple devices using a single GPIB card. In other words, you may want to use a separate GPIB card for each instrument you want to emulate. I wrote such an emulator some time ago but can't seem to find it. In any case, it's probably only a couple of days effort.
To make a long story short, your life will be a lot easier if you have IVI-compliant instrument drivers available for the hardware that you are using.
Jason

Visual Studio's Emulator for Android is not working or either showing in Hyper-V

I installed the VS 2015 CTP with Cordova tools and Have already installed the Xamarin .... But the Android emulator is not showing in the Hyper-v or dosn't start up. But i just check the Programmes i have installed its there in the list. I have enabled the
Hyper-v and other specs are also available ... VS als dosnt shows the Emulator is there .... Please help me to up the Android Emulator for Visual Studio ...
-------------------------------------------------- Hyper - V -----------------------------------------------
------------------------------------------------------------------- Control Panel -------------------------------------------------------------
Dileepa S. Rajapaksa
Trainee Developer
Microsoft, Sri Lanka
Twitter : @dsrajapaksa
Blog : http://www.dileepatech.net

The Microsoft Visual Studio emulator for Android can be identified by "VS Emulator Kitkat..." and "VS Emulator Lollipop ...". You should see the virtual machine in the Hyper-V manager once it's created.
Here's a
MSDN article that talks about the Visual studio Emulator for Android.
Abdulwahab Suleiman

Does anybody know of a way to get PSX Emulator for iPhone 4s w/ out jailbreak?

Does anybody know of a way to get PSX Emulator for iPhone 4s (iOS 7) w/ out jailbreak? Im trying to relive my childhood on my phone. I have the gameboy emulator and i know the date and time rule. I was just wondering if anybody knew a good place to get a psx emulator without having to jailbreak my device.
Also, does anybody on the off chance know a record-your-screen program for iOS 7 without a jailbreak? That would be much appreciated.
Thank you in advanced,
PMC~

I think that the psx emulator is actually in the retroarch emulator.
Haven't tested it as of yet, because the download link isn't working.
I'm using the GBA emulator at the moment too but I'm pretty bored of it, I wanted to play final fantasy :(

Need a Firehand Lightning emulator for the Mac

My daughter's wedding pictures were put together by the photographer with a program called Firehand Lightning. Is there an emulator for the Mac for this software? The photographer has given permission for me to use an emulator to open these pictures.

Ya, he's giving you the BS treatment. After doing a bit more reading, Firehand basically allows someone to take a set of pictures they have and package them together in a single .exe file that becomes a sort of slideshow presentation. You need to go back and read what your contract with this photographer said, because if you paid him to take pictures and provide you with those pictures for said price, then he needs to provide those pics to you. If the contract read something along the lines of you're paying him to take pics which he will provideo to you in an album or slideshow encapsulation for said price, then you're hosed because he's basically getting away with charging you for doing half-*** work really. Any professional photographer should be giving his/her clients full rez JPEGs of the work they're doing and getting paid for, not some bundled junk presentation/slideshow, unless you asked for that specifically. Either way, you need to go read your contract with him/her. If you didn't have one, then you need to confront him/her with your demands. Paying an additional $1500 just for him/her to take some pics off a card and put them on a CD or DVD for you is outrageous and ground for taking him to small claims court in my book... unless a contract was signed or verbally agreed upon that allowed him to swindle you because you didn't understand what he was selling you on.

Emulation for partner link with async operation and no callback client

In our Composite, we are calling a partner link with operation 'XYZAsync'. It is called in async mode and there is no callback client attached to this call. Hence, it is not possible to create emulation for it ( Create new emulate option is unavailable for the particular operation).
We are facing the following issues:
1. Jdev is unable to generate the sample XML.
2. When we tried to add emulation, the "+ icon" is not high lighted.

Hi again,
i managed to solve the problem:) Totally stupid.. the process variable name was not specified correctly..., but more stupid sounds the error message:))))
Best Regards,
Evanela

Where has the mobile emulator for windows gone?

Posts going back a year or so, refer to the mobile emulator for windows. Those links don't seems to work/be there, is there currently a version for developers?

No. Those tools were for old versions of Fennec that are now deprecated and essentially dead. All current development is geared towards the Android platform.

Online Emulator for RV042 router

Hello:
I am looking for Online Emulator for RV042 router.
If yes, please reply with a link.
If no, please give me a similar one.
Many thanks.

Sang1224 wrote:
Please keep me posted regarding the outcome.
I am never surprised by Verizon's marketing shenanigans, but everyone in my cul-de-sac is running a VZ WiFi router, so the signal is always bogged down. I just want to get this new router and see if it helps with my service.
I will try again today, if I can get someone on the phone.
I'll keep you posted. No contact from either here or {edited for privacy} Verizon Executive Relations Team, who emailed me yesterday. I just checked my call log in DV and my cell, and no missed calls.
In my now daily check of offers, today was 75/75 for $10 and a new router. I clicked it, and unlike your experience, it did offer it to me for only $10 more for 2 years. As tempting as it was to do it for another free router I resisted, waiting to see how this is resolved.
I will wait till later today to see if anyone reaches out before going further.

Virtual pc emulator for ppc mac?

Is there a virtual pc emulator for a pcc mac that runs on mac os x 10.4.2 and does a ppc processer have VT?

Hardware Overview:
Machine Name:    iBook G4
Machine Model:    PowerBook6,7
CPU Type:    PowerPC G4 (1.5)
Number Of CPUs:    1
CPU Speed:    1.33 GHz
L2 Cache (per CPU):    512 KB
Memory:    768 MB
Bus Speed:    133 MHz
Boot ROM Version:    4.9.3f0
Serial Number:    4H5341------
Sudden Motion Sensor:
State:    Enabled
Version:    1.0

Is there any emulator for I-Mate Kjam PDA

Hi
Is there any emulator for I-Mate Kjam PDA,
i have developed an application using midp2.0 and cldc1.1
when iam trying to down load it to pda
its giving an error "invalid jad file"
I have checked all the attributes in jad and maifest file
please help me
its quite urgent

Hi friend,
I've already try out the corresponding link for translation but it coudn't translate the contains of
pdf file which specify how to preverify , run the MIDlet,create the jar file etc.
And the htmls which specify the APIs.
And this sdk's i can't integrate in any Wireless toolkit also.
If you used this sdks already can sent me the details of how to preverify,run the MIDlet and create the .jar file ,and required setting of System variables to this thread or on [email protected]?
If you know any other translator for this as i've already search on google for this?
Regards,
Sachin Warang.

I need a sdk and emulator for NEC mobile phones !!!

Can anyone have an idea where i can find this ?
thanks a lot

No, not that one either. I know Siemens has got some stuff, Nokia, Sony/Ericsson, Motorola (including their lovely GPS J2ME APIs) all have emulators, but the truth is I haven't seen any Asian (other than Sony) device vendor to provide emulator for their device. As I said, please go and talk to them directly - I guess they might have something.

[SOLVED] internal error Cannot find suitable emulator for x86_64

Hi,
After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
Systemd gave me the following:
% systemctl status libvirtd
libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
Main PID: 1499 (libvirtd)
CGroup: name=systemd:/system/libvirtd.service
├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
└─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
% grep vmx /proc/cpuinfo | uniq -c
8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
Can anyone help me? Has anyone else faced a similar problem?
Here are some version info:
local/libvirt 1.0.6-1
API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
local/qemu 1.4.2-1
A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
Of which, qemu got updated just today. I will try rolling back to older version and post and update.
Ninja edit: Looks to be qemu. Just running qemu gives me this error:
% qemu-system-x86_64
qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
EDIT: The resolution was
pacman -S libiscsi libaio
systemctl restart libvirtd
EDIT2: Made subject line better searchable
Last edited by railmaniac (2013-06-08 04:19:24)

HI,
First of all thanks a lot for this post. I am facing the same issue since yest.
After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
But I am not sure if I can get back my missing VMs .
I am new to linux. Kindly guide me on how I can get back those VMs.
[root@skoduri lib64]# ls /etc/libvirt/qemu/
networks rhel6-vm2.xml rhel6.xml
[root@skoduri lib64]#
[root@skoduri lib64]# ls /etc/libvirt/storage/
autostart default.xml storage_1.xml
[root@skoduri lib64]#
[root@skoduri lib64]#
Thanks,
Soumya

Snes emulator for mountain lion with support for usb controller dongle

Hi,
I recently downloaded an snes emulator online and found that it does run the super nintendo game fine though it doesn't have support for the usb dongle for the controller. By any chance does anyone know a emular plug in or emulator for mountain lion that has this support for a usb joystick.

Thanks for the reply. Still curious if Apple did right by their customers as the support rep implied that they would. I can't confirm either because I discovered tonight that I can't upgrade to Mountain Lion yet until Mariner Software decides to make one of their products compatible with 10.8. Starting to think I need to find an alternative to their product.

J2ME CLDC/MIDP emulator for Compaq iPAQ

I would like to run J2ME CLDC with MIDP on my Compaq iPAQ 3650. I am NOT interested in PersonalJava at this time. I have two questions:
1. Has anyone tried to put the J2ME Wireless Toolkit emulator on iPAQ, with or without Swing? J2ME WTK currently requires Swing, but it seems like that AWT may be used exclusively instead with some slight modifications.
2. Does anyone know if there is an applet/AWT version of a J2ME CLDC/MIDP emulator that I can use for demos?
Thanks.

You can use the PalmOS emulator for winCE and install MIDP4PALM...

Q Emulator for PowerPC G5 (setup.exe instead of an installation disk)

I recently downloaded the "Q" Emulator for my Mac, and I am now at the point of installing an OS as my Guest PC. The only problem is, I don't have an official Windows XP installation disk, but I do have a burned disk with all the necessary components compressed into a ZIP file. I expanded the file, and found all those components; however, Q won't recognize the disk as a bootable drive, nor will it recognize the .exe file as anything important. I'm wondering if there's a way to run XP from that file or the disk using Q, or if it's hopeless and I should just buy an installation disk. I appreciate any advice or comments. Thank you.

Hi,
first of: I haven't ever used Q.
From what I get form here: http://trac.kju-app.org/wiki/WindowsXPServicePackTwo Q needs a bootable XP CD in order to install it.
But your ZIP archive seems to only include the files from the XP CD and lacks the neccessary boot sector.
The boot sector can only be obtained from a XP CD, so you are stucked.
Try to borrow a XP CD from a friend and install from it while using your own license key.
Stefan

Emulator for HDInsights 3.2?

Similar Messages

Maybe you are looking for