Enable server side soring

Dear all
Can please someone tell me how to enable server side sorting in LDAP version 6.3. My application requires that this functionality to be enabled and i don't know how to enable it.
please advice.

You have to create browsing indexes.
Have a look at [http://docs.sun.com/app/docs/doc/820-2765/fpypa?l=en&a=view&q=server+side+sorting] and
[http://docs.sun.com/app/docs/doc/820-2763/bcaug?l=en&a=view&q=server+side+control]

Similar Messages

Enabling server-side load balancing with Oracle 10g RAC

Hi, all.
I created a RAC database on vmware by using DBCA.
By default, remote_listener and tnsname.ora have been configured.
The followings are part of dba_services from my RAC database.
NAME, GOAL, ENABLED, CBL_GOAL
SYS$BACKGROUND NONE NO SHORT
SYS$USERS NONE NO SHORT
DEVDB NO LONG
By default(created by DBCA), server-side load balancing is enabled for
the RAC database, DEVDB??
--> GOAL of DEVDB is null, but CBL_GOAL IS LONG.
After creating a RAC db by using "DBCA", do I need to do something
for server-side load balancing??
If so what I need to do?? How can I test it??
And what is beneficial in enabling server-side loadbalancing ??
Is it good in the real world??
Thanks for reading.
Best Regards.
Message was edited by:
user507290

[urgent] 10gR2 RAC Load Balancing Configuration (client and server side)!!
[urgent] 10gR2 RAC Load Balancing Configuration (client and server side)!!
Virag

Enable Server Side Includes in Appp server 8?

Hello
Java App Server 8
I posted again in case my original post wasnt clear. Im trying to find in the admin guide where I can find instructions on how to enable Server Side Includes in my application ie. how to allow .shtml documents.
Any suggestions appreciated.
Jon

Hi !
I have installed Sun App server 8 update 1 on a Windows server 2003.
Is it possible to run the application server as a NT service ?
If so how can I accomplish this ?
/Regards Krister

TOMCAT - Enable Server Side Includes

Hi, i tried to include files in my pages using  but its not working so i suppose i must configure my tomcat in some way in order to enable the server side includes (im tottaly new to TOMCAT) so, anyone can explain me how to do it?
Thx!

Hi, i tried to use the tag like this:
<jsp:include page="../menu.jsp" flush="true" />
But it did not work.. why?
id did something like this:
<% jsp code %>
<html>
<head>
</head>
<body>
<jsp:include page="../menu.jsp" flush="true" />
some content
</body>
is there any special use?
thX!

How to enable server-side include in OS X 10.8

Do I need to modify apache2/httpd.conf directly, or is there a higer level way to do this?
If need to modify httpd.conf, exactly how?
thanks.

go to System Preferences > Users & Groups
Login Options (underneath the list of users)
Tick "Show fast user switching menu as .."

Server-side Trust with CryptoLib &/or 3rd party tool

I have a new installtion:
> BOE XI 3.1 SP2 (Solaris)
> SAP Integration Kit
Intend to enable server-side trust / SNC betw BOE and BW.
Separately, BASIS just installed/config'd new standard tool (Quest's Vintela) on BW for SSO from SAP GUI clients to BW. I notice some parms (such as snc/gssapi_lib) now are configured to Quest/Vintela libraries on BW.
Possible to have both Vintela and CryptoLib co-exist/co-active on BW? ... or is best approach (even forced / only approach) is to standardize on one? ... likely install Vintela on BOE and use Vintela for BOE-to-BW SNC?
thx, Clay

Hi Clay,
I believe you're right, that they can't co-exist for use as SNC libraries. I really don't have a complete understanding of how this all works, but I believe they can co-exist if the sapcrytolib is used for RFC that is not using SNC. Maybe someone else can confirm, deny, or expand on that?
Even though we (Quest) donu2019t always know the exact configuration options for each application that supports SNC, as a certified SNC interface it should always be possible to get things working in a fully supported manner. If you would like to work with me on this directly I would be happy to help. You can find my e-mail address under my business card.
Thanks!
Kyle

MS CRM 2105 server side synchronization

Hello ,
My online CRM is integrated with server side synchronization. The incoming and outgoing emails are working fine before.
But yesterday onwards the incoming emails are not receiving in to CRM. But I see the emails are exists in the exchange server.
I have tried with test and enable the Mailbox. From yesterday onward the status is still showing the
"the email configuration test is in progress".
I have a plugin which was triggering on email creation but in post operation, I have disabled the steps also.
But still the issue is not fixed.
Any help will be appreciated.
Regards,
Priya

Hello,
Enable tracing it will give you pointer, what is wrong.
You could also refer: https://technet.microsoft.com/en-us/library/dn850386.aspx?f=255&MSPPError=-2147217396
http://gustafwesterlund.blogspot.in/2014/04/server-side-sync-trouble-shooting.html
Microsoft Dynamics CRM Training|Our Blog |
Follow US |
Our Facebook Page |
Microsoft Dynamics CRM 2011 Application Design
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

Server-Side Includes in weblogic server 5.1

          Hi,
          I tried Server-Side Includes examples in weblogic server 5.1 thru .shtml file.
          I am able to load the .shtml file but its not loading the included servlet. But
          I am able to load the included servlet alone separately.
          Somebody can be assist me what I have to do?
          I am using WebApplication WAR structure for my application.
          ex: http://localhost:7001/esp/hellooWorld -- loading the servlet
          http://localhost:7001/esp/html/ServletInclude.shtml -- not loading servlet
          where 'esp' name of the WebApplication
          The .shtml file code is given below
          <html>
          <body>
          <servlet name=hellooWorld>
          </servlet>
          </body>
          </html>
          Looking forward for some help
          Thanks


          Your WebLogic doesn't know it's supposed to be doing server-side includes. Make
          sure you have .shtml registered/enabled - see the docs.
          Mike
          "Jyothi" <[email protected]> wrote:
          >
          >Hi Mike,
          >Thanks for your reply.
          >>What errors (if any) do you see in the log file?
          >Just coming up with blank screen. No errors reported in log file. Nothing
          >coming
          >in log file regarding the servlet.
          >>
          >>When you display the page in a browser, what does View -> Source show?
          >Just getting blank screen. If I see view source same source code coming
          >up. Here
          >is the view source when I view it from browser
          >**********************************************
          ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
          ><html>
          ><head>
          ><title>Including a servlet with SSI</title>
          ></head>
          >
          ><body
          > bgcolor="#FFFFFF"
          > link=#DB1260
          > vlink=#828282>
          >
          ><font face="Helvetica">
          >
          >
          ><p>
          ><servlet name=hellooWorld>
          ></servlet>
          >
          ></font>
          ></body>
          ></html>
          >*********************************************************
          >>Did you register the servlet?
          >Yes. I registered the servlet. Thats why if I load the servlet alone
          >I am getting
          >the output.
          >http://localhost:7001/esp/hellooWorld -> url used to load servlet alone
          >>
          >I hope this info helps to you to analyze my problem
          >
          >Thanks
          >Jyothi
          >>
          >>"Jyothi" <[email protected]> wrote:
          >>>
          >>>Hi,
          >>>I tried Server-Side Includes examples in weblogic server 5.1 thru .shtml
          >>>file.
          >>>I am able to load the .shtml file but its not loading the included
          >servlet.
          >>>But
          >>>I am able to load the included servlet alone separately.
          >>>Somebody can be assist me what I have to do?
          >>>I am using WebApplication WAR structure for my application.
          >>>ex: http://localhost:7001/esp/hellooWorld -- loading the servlet
          >>>http://localhost:7001/esp/html/ServletInclude.shtml -- not loading
          >servlet
          >>>
          >>>where 'esp' name of the WebApplication
          >>>
          >>>The .shtml file code is given below
          >>>-----------------------------------
          >>><html>
          >>><body>
          >>><servlet name=hellooWorld>
          >>></servlet>
          >>></body>
          >>></html>
          >>>--------------------------------------------------
          >>>
          >>>Looking forward for some help
          >>>
          >>>Thanks
          >>>
          >>>
          >>>
          >>>
          >>>
          >>
          >

Trouble Testing Server Side Includes using personal web sharing

I am using the book "Standard complant websites using dreamweaver 8" One of the exercises has me testing that server side includes are enabled by creating two files ssi_test.shtml and hello.html. I have placed these two files in the documents subfolder which web server is the main folder.
Since I only see a blank page when I test, the book says I need to tweak the Apache configuration to enable SSI. It says to open httpd.conf file (which I can not find) . I am suppose to insert the following lines: AddType text/html .shtml and Addhandler server-parsed .shtml
Where is this file httpd.conf file located?
How do I modify it?
Thanks for your support
James
powermac G4 Mac OS X (10.3.9)

It is in /private/etc/httpd directory.
You will need a file editor that knows how to authenticate or to learn some basics with the command line and unix to use sudo to edit the file.
<pre>sudo pico /private/etc/httpd/httpd.conf</pre> is where I recommend you start if you don't know emacs or vi or another of the fine unix editing tools that are provided...
An article that was intended to fix a different problem - but has all the steps you need to locate the terminal application, learn about sudo, etc... is http://docs.info.apple.com/article.html?artnum=301580

HOWTO: Setting up Server-Side Authentication with SSL

This howto covers the configuration of server-side SSL authentication for both Net8 and IIOP (JServer) connections. It documents the steps required to set up an SSL encrypted connection; it does not cover certificate authentication.
It is worthwhile noting that although the setup of SSL requires the installation of certificates, these certificates do not have to be current, only valid. For some reason, in order to enable SSL connections, it is necessary to set up valid certificate file on the server whether you intend to use certificate authentication or not.
NOTE: I have been unable to determine whether or not the above statement is entirely correct. If anyone can confirm or disprove it, please let me know.
The steps described below must all be carried out from the same logon account. They have been tested on both 816 and 817 databases, but will probably work for all versions, including 9i (unless there have been some drastic changes in 9i that I'm not aware of).
1. Log on to the database server with an administrative login.
Configure the database and listener to run under the current login account (Control Panel -> Services). It is not necessary to restart these services at this time.
2. Create an Oracle wallet and set up the required certificates
(i) Open the Oracle Wallet Manager:
Start -> Programs -> [Oracle Home] -> Network Administration -> Wallet Manager
(ii) Create a new wallet (Wallet -> New).
(iii) When prompted, elect to generate a certificate request.
(iv) On the request form, the only field that matters is the Common Name. Enter the fully qualified domain name (FQDN) of the database server (i.e. the name with which the database server will be referenced by clients).
(v) Export the certificate request to file (Operations -> Export Certificate Request).
(vi) Obtain a valid server certificate from an authorised signing authority. It will also be necessary to download the signing authoritys publicly available trusted root certificate. Certificates can be obtained from Verisign (http://www.verisign.com/)
(vii) Install the trusted root certificate obtained in (vi) into the wallet (Operations -> Import Trusted Certificate). Either paste the contents of the certificate file, or browse to the file on the file system.
(viii) Install the server certificate obtained in (vi) into the wallet (Operations -> Import User Certificate). Either paste the contents of the certificate file, or browse to the file on the file system.
(ix) Save the wallet (Wallet -> Save). The wallet will be saved to the [user home]\Oracle\Wallets directory.
3. Configure the listener for SSL.
(i) Open the Oracle Net8 Assistant:
Start -> Programs -> [Oracle Home] -> Network Administration -> Net8 Assistant
(ii) Select Net8 Configuration -> Local -> Profile.
(iii) From the drop-down list at right, select Oracle Advanced Security. Select the SSL tab.
(iv) Select the Server radio button.
(v) In the wallet directory field, enter the location of the wallet created in step 2, e.g. C:\WINNT\Profiles\oracleuser\ORACLE\WALLET
(vi) Uncheck the Require Client Authentication checkbox.
(vii) Select Net8 Configuration -> Listeners -> [listener name].
(viii) Add a new address:
Protocol: TCP/IP with SSL
Host: [database server FQDN] (e.g. oraserver)
Port: 2484
(ix) Add a second new address:
Protocol: TCP/IP with SSL
Host: [database server FQDN] (e.g. oraserver)
Port: 2482
Check the Dedicate this endpoint to IIOP connections checkbox.
(x) Save the Net8 configuration (File p Save Network Configuration).
(xi) Restart the listener service.
4. Configure the database to accept SSL connections.
(i) Open the database inti.ora file (\admin\[SID]\pfile\init.ora or equivalent).
(ii) At the bottom of the file, uncomment the line that reads
mts_dispatchers = "(PROTOCOL=TCPS)(PRE=oracle.aurora.server.SGiopServer)"
(iii) Save the file and restart the database service.
5. Test the SSL confi guration using the Net8 Assistant.
(i) Open the Oracle Net8 Assistant.
(ii) Select Net8 Configuration -> Local -> Service Naming.
(iii) Add a new net service (Edit p Create).
Net service name: [SID].auth (e.g. iasdb.auth)
Protocol: TCP/IP with SSL
Host: [database server] (e.g. oraserver)
Port: 2484
Service Name/SID: [SID] (e.g. iasdb.orion.internal)
Note: at the end of the net service configuration, click Finish, not Test. The test can hang if run from the wizard.
(iv) Test the connection (Command -> Test Service). If the only error to appear is username/password denied, the test has succeeded.
null

Dear Alex,
Thank you for reaching the Small Business Support Community.
I would first suggest you to uncheck the "Perfect Forward Secrecy" setting on the RVS4000 and if see if there is some similar setting enabled, then disable it, on the other side. If still the same thing happens, then go to RVS4000, VPN Advanced settings, and disable the "Aggressive Mode" so it becomes "Main mode" and use the same on the other end of the tunnel.
Just in case and as a VPN configuration guide, below is a document called "IPSec VPN setup" if it helps somehow;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=587
Besides my suggestions I would advise you to contact your ISP to make sure there is no IPSec traffic restrictions and/or if there is something in particular they require to make this happen and please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Dreamweaver previews first Server Side Include Only (SSI)

Dreamweaver CC and 2014 preview the first Server Side Include (SSI) only, even if the Adobe extension is installed (Using the SSI extension in Dreamweaver to create page headers | Adobe Developer Connection)
How do I set Dreamweaver to preview multiple (more than one) SSI's?
Example Code:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>


</body>
</html>
The code above will preview the text in "Content.shtml" but will not display the text in "content2.shtml".
For troubleshooting purposes, I have reduced the content in each file to only single lines of basic text.
Please advise. Thanks.
Update:
Dreamweaver Live View will show all of the server side includes. However the "Design View" and "Preview in Browser" will only show the one ssi.
The following Preference settings are enabled:
-Preview using temporary file
-Show contents of included file
Update 2:
I discovered that server side includes have been removed from the Dreamweaver interface, inferred from this article: A Look at the Modernized Dreamweaver CC : Adobe Dreamweaver Team Blog. If Server Side Includes were removed, can they be added again using the Server Behavior extension?

The issue is fixed in Dreamweaver 2014.1

Displaying server-side include in DW8

Sorry if this has been asked before? I did search and
couldn't find it (this site is painfully slow and searching is
worse)
I am trying to figure out how to make DW8 show my server-side
include files in the design view. My site uses SSI for all headers
and footers, so every page has at least 2 SSI's. They show up as
the SSI mark on the page, but not the code or graphical
representation of what is in the SSI. I need to have that code
snipet show up in my design view. The only way I have been able to
figure out how to do it, is to reinsert the SSI again from the
menu, and then delete it. Doing it that way, the original ssi that
is listed on the page will display graphicly in the design view.
I do have the option in the preferences - Invisible Elements
- Server-Side includes: and the check box is checked / enabled.
If I could, while I'm here, one other question. I have DW
code rewriting turned on, and it shows me each time I open a file,
what corrections it has made. But if I save the file, and then open
it again, it shows me the exact same corrections being done again.
Is there a trick to make DW8 save the corrections it automatically
makes to the files?
many thanks in advance.

> I know that there were major changes between 4 and 8.
One of which was tightening the tolerance for bad code. CS3
is very strict
about displaying proper code.
However, your fragments below look OK.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mmdlcab" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
bregent
> Do any of your included files include html, head or body
tags? If so,
> that's
> the problem. Having those creates invalid html which DW
will not
> render.
>
> Thats a great thought, but I just checked, and no, none
of those tags are
> in
> the files. I'll see if I can attach the code for the 2
files and see if
> that
> helps any. The header file does have my menu system
pasted into the text
> of
> the include file, but that has not caused problems
previously. FWIW, this
> worked fine in DW4 which is what I upgraded from. In
version 4, the
> headers
> and footers showed up fine in desgin view. I know that
there were major
> changes between 4 and 8.
>
> Header include file:
> ----------------------------
> <table border="0" align="center" width="750"
height="110">
> <tr>
> <td><a href="/index2.html"><img
src="/images/color_logo.gif"
> width="110"
> height="107" alt="MMDL Logo" border="0"
/></a></td>
> <td align="center" valign="middle"><a
href="/index2.html"><img
> src="/images/header4.gif" width="450" height="110"
border="0" alt="MMDL -
> The
> worlds largest steel tip dart league"
/></a></td>
> <td align="center" valign="middle"><a
href="testpage.html"></a><a
> href="
http://www.dmisports.com/darts_main.html"><img
> src="/images/dmilogo_small.gif" alt="DMI Sports"
width="110" height="77"
> border="0" longdesc="
http://www.dmisports.com"
/><br />
> 
> </a><a href="
http://www.mmdl.org/dmi_flyer.pdf">League
Board </a></td>
> </tr>
> </table>
> <script language="JavaScript"
> type="text/javascript">
> var navVer = navigator.appVersion;
> if(navVer.substr(0,3) >= 4)
> if((navigator.appName=="Netscape") &&
(parseInt(navigator.appVersion)==4))
> {
> document.write('<' + 'script language="JavaScript"
type="text/javascript"
> src="
http://www.mmdl.org/dmbmenu/nsmenu.js"><\/script\>');
> } else {
> document.write('<' + 'script language="JavaScript"
type="text/javascript"
> src="
http://www.mmdl.org/dmbmenu/iemenu.js"><\/script\>');
> }</script>
> <table border="0" width="550"
> height="110">
> -------------------------------------
> footer include file
> --------------------
> <table border="0" align="center">
> <tr>
> <td width="20" valign="top"
align="center"> </td>
> <td align="center" valign="middle" width="194">
> <div align="left"><a
href="mailto:[email protected]?subject=MMDL
> Darts.*..
> ">Comments? Email us</a></div>
> </td>
> <td align="center" valign="middle"
width="128"><a
> href="
http://www.mmdl.org/dmbmenu/textmenu.html">Text
> based menu</a></td>
> <td align="center" valign="middle"
width="223">© <SUP>SM</SUP>
> 2007
> Minute Man Dart League. All rights reserved.</td>
> </tr>
> </table>
> -----------------------
>
>
>
>

Spry Widget as a Server Side Include

I am new to using SSI. I guess one question is: does the
include have to be saved as a .shtm or .shtml file? I am trying to
take a Spry Navigation bar and use it as an include in a site I am
building. I have saved it as a .html file and a .shtml file, but
neither is working. It shows up in design view, but not preview in
browser view. Here is the code of the SSI:
<script src="../SpryAssets/SpryMenuBar.js"
type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarVertical.css"
rel="stylesheet" type="text/css" />
<div>
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="
http://www.j-boysentertainment.com">Home</a>
</li>
<li><a href="#"
class="MenuBarItemSubmenu">Projects</a>
<ul>
<li><a href="../pamperzpro.html">Pamperz
Pro</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu"
href="#">Creative Team</a>
<ul>
<li><a href="#">Jeff Reed</a> </li>
<li><a href="#">John
Elliott</a></li>
<li><a href="#">Jack Kelly</a></li>
<li><a href="#">J. Skylar
Testa</a></li>
<li><a href="#">Jonathan
Perkins</a></li>
</ul>
</li>
<li><a href="#">Connect</a></li>
</ul>
</div>
<script type="text/javascript">

</script>
Does anyone see what I am doing wrong? Also, when I insert it
as a SSI, does it matter if it is a file or a virtual?

Create a page that contains ONLY this -
<p>woohoo</p>
and save it as woohoo.monkeybutt.
Then create another page, click in the Design view, and
insert a server-side
include. Browse to and select woohoo.monkeybutt.
Save this new page as "page.shtml".
Preview it in the browser (with temp files enabled in your
PREFERENCES).
'nuff said?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jp3rks" <[email protected]> wrote in
message
news:[email protected]...
>I am new to using SSI. I guess one question is: does the
include have to be
> saved as a .shtm or .shtml file? I am trying to take a
Spry Navigation
> bar and
> use it as an include in a site I am building. I have
saved it as a .html
> file
> and a .shtml file, but neither is working. It shows up
in design view,
> but not
> preview in browser view. Here is the code of the SSI:
>
>
> <script src="../SpryAssets/SpryMenuBar.js"
> type="text/javascript"></script>
> <link href="../SpryAssets/SpryMenuBarVertical.css"
rel="stylesheet"
> type="text/css" />
> <div>
> <ul id="MenuBar1" class="MenuBarHorizontal">
>
<a href="
http://www.j-boysentertainment.com">Home</a>
</li>
>
<a href="#" class="MenuBarItemSubmenu">Projects</a>
>
>
<a href="../pamperzpro.html">Pamperz
Pro</a></li>
>
> </li>
>
<a class="MenuBarItemSubmenu" href="#">Creative
Team</a>
>
>
<a href="#">Jeff Reed</a> </li>
>
<a href="#">John Elliott</a></li>
>
<a href="#">Jack Kelly</a></li>
>
<a href="#">J. Skylar Testa</a></li>
>
<a href="#">Jonathan Perkins</a></li>
>
> </li>
>
<a href="#">Connect</a></li>
>
> </div>
> <script type="text/javascript">
> 
> </script>
>
> Does anyone see what I am doing wrong? Also, when I
insert it as a SSI,
> does
> it matter if it is a file or a virtual?
>

Problem inserting records after execution of server side code

Hello,
I've created a server-side function for duplicating a master record and it's details. This function has two input parameters that define the new unique key of the master record. Because the user has to supply the new unique key, there is a possibility that the unique key already exists.
The server-side function is being called from a form module. This form module contains all the code needed for opening / closing and aborting the HSD transaction. The form also enables users to add new master records manually.
If the server-side function is called from within the module there are two possible outcomes:
1, the unique key already exists and the HSD error message window is displayed.
2, the unique key does not exist and the records get duplicated.
If I try to add a new master record in the form after a failed duplication process, I get a form message informing me that NULL cannot be inserted into the ID column. (The primary key.) BTW updates work just fine. However, if I call the server-side function again and the duplication process is succesfull, I can again insert a new master record in the form succesfully.
I'm assuming that this problem has something to do with the TAPI package because I use TAPI insert calls to insert the master / detail records when duplicating. A workaround for this problem is (obviously) to check if the supplied unique key already exists in the database before calling the server-side function.
I however am concerned a bit because a lot of program functionality has been implemented in server-side functions and procedures. So I would like to know if anyone has had the same problems and possibly knows if there is a generic solution to this problem.
Greetings,
Marco.

Marco,
Can you make a test case for me and send it to me? It looks like we might have a bug and I would like to investigate.
Regards,
Lauri
[email protected]

Server Side Load Balancing Testing

Hi,
Can any one tell me about any test case for server side load balancing in an 11.1.0.7 RAC?
I have a 2 nodes RAC with local_listener and remote_listener set properly (for server side load balancing). For testing, i have create a TNS at my client side which points to only one node of RAC (a single ADDRESS entry pointing to node 1 of my RAC). So, from this client, when ever i connect, it always connects me to the node 1 which i have mentioned in the TNS. Does it mean that server side load balancing works in conjunction with client side load balancing only and i should add ADDRESS entry in my TNS for the second node also? If yes, then how can i create a test case to check server side load balancing?
Thanks
Salman

Thanks Rajeysh but i already have seen these documents after "googling" about server side load balancing but these documents don't give my any idea for testing the server side load balancing. My goal is actually testing the following scenario
Creating a TNS entry to connect to a RAC database (with server side load balancing enabled) by using a single ADDRESS line in TNS which points to node1 to connect to service on node 1 (service_name is set to same value on all the nodes).
Now, if i invoke 10 SQLPLUS windows to connect to the RAC database using this TNS, it always connects me to instance 1 running on node 1, where is server side load automatic load balancing? Why new sessions are not being directed to some other instance and why every time i always connect to instance 1?
Salman

Enable server side soring

Similar Messages

Maybe you are looking for