Enable SSH on all LAP's

Hi there
is it possible to enable SSH for all LAP's on a WLC console (and even on the GUI)? I only know the command "config ap ssh enable <Cisco AP>", is there a hidden command for all LAP's or a global command to enable SSH per default?
Thanks a lot and best regards
Dominic

It does not seem to be a way on the CLI/ GUI of WLC for ALL the AP from one time click:
http://www.cisco.com/en/US/docs/wireless/controller/6.0/command/reference/cli60.html#wp8904301
If you have WCS, I think you can run a template to disable it on all the APs, but this does not exists on the CLI / GUI of WLC.

Similar Messages

Not able to enable SSH user equivalency for RAC on RHEL 4

Hi All,
I am trying to install oracle RAC 11g on RHEL4 (on VMware), I am using below document for reference.
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnOEL5UsingVMware.php
Every thing went fine till "SSH user equivalency", but I am not able to SSH and SCP between servers without entering passwords.
I have tried removing .ssh folder & recreating pub file twice but it did not helped.
am i missing something?
Please advice.
Thanks,
Abhay.

Configure SSH on each node in the cluster. Log in as the "oracle" user and perform the following tasks on each node.
su - oracle
mkdir ~/.ssh
chmod 700 ~/.ssh
/usr/bin/ssh-keygen -t rsa # Accept the default settings.
The RSA public key is written to the ~/.ssh/id_rsa.pub file and the private key to the ~/.ssh/id_rsa file.
Log in as the "*oracle*" user on RAC1, generate an "authorized_keys" file on RAC1 and copy it to RAC2 using the following commands.
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac2:/home/oracle/.ssh/
Next, log in as the "oracle" user on RAC2 and perform the following commands.
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac1:/home/oracle/.ssh/
The "authorized_keys" file on both servers now contains the public keys generated on all RAC nodes.
To enable SSH user equivalency on the cluster member nodes issue the following commands on each node.
ssh rac1 date
ssh rac2 date
ssh rac1.localdomain date
ssh rac2.localdomain date
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
You should now be able to SSH and SCP between servers without entering passwords.
hope, this may helps you.
enjoy.
if you are unable to resolve it, please refer:-
http://download.oracle.com/docs/cd/B28359_01/rac.111/b28252/preparing.htm#BGBBDHIB
http://dsstos. blogspot.com/2009/03/linux-oracle-rac-and-bonding-conundrum.html

Rescue CD/distribution that enables ssh/telnet on boot?

Hi all,
I am looking for a distribution/live cd that enables ssh/telnet (or something similar) on boot. The reason I need this: I am trying to get data from a broken all-in-one PC (only the monitor appears broken), and do not have access to a monitor.
I have searched google for this, and it looks like this particular livecd may not exist, and that I may have to create my own livecd (something I have never done before...).
I figured I'd ask here first, in case anyone knew of such a livecd.
Thanks

WonderWoofy wrote:
I never said you were rude, but I am giving you a viable solution. It is not like you are going to have to do this over and over again, you simply need access to your headless machine (hopefully just once anyway).
I did exactly what I am proposing to you when I installed Arch on my headless server. So I know it can be done, and it is probably one of the simplest of solutions... by that I mean you could be moving data off your drive by now.
Insert Archiso and press power button
...give it some time to boot...
# passwd <desired password>
# systemctl start sshd
PROFIT!
I tried this earlier, but it did not seem to work. I'll move the PC downstairs and hook it up straight to the router instead of my current usage of powerline ethernet (seems harder to find the IP with nmap), and try the arch iso again.
The good news is that I know it boots from the CD, from looking at the various lights and listening to the hdd/drive sounds. xD

Enabling ssh with a startup config or similar?

Hello,
Im am currently testing the new features of IOS 12.2 55 SE1 called "Smart Install".
I got it working even though it still has many issues but that's probably because it is a very new functionality.
Anyways, we are using it currently in a lab-environment to test the "zero-touch" replacement of defective Switches. In that case the Director of the SI Network knows what config the defective Switch has saved last.
It then uses that exact config to deploy to the replaced switch as a startup config.
For Security Reasons we have the command "transport input ssh" on all lines enabled. (Makes sense if you want to shut out telnet).
Now, when the new Switch receives the IOS Update (which is also delievered in Smart Install) and therefore reboots, it now uses our startup config.
With the above mentioned command "transport input ssh" on the lines, we have no way of connecting to the newly replaced switch.
"Crypto keys cannot be generated on startup" is the message I see on the Serial-Console output.
Has anyone got an idea how we could work around this?
Is there a way to tell a switch he has to generate an rsa certificate to enable ssh without "touching" it?
I know that with the command "transport input all" this issue would not be an issue, but that is not an option for a possible productive Release. Since we are using a config of a switch that was running productively, the running config cannot allow telnet to be used..
I have asked Google, used this forum's search functionality and found nothing. I am absolutely sure though, that this is an issue many Cisco Users have to work with, so I was suprised not to find anything.
Details of our lab:
Director Switch: C3560 with IOS 12.2 55 SE1
Client Switch (to be replaced): C2960 IOS 12.2 55 SE1
Both have the crypto-image installed.

Hello Richard,
Thanks for your answer.
Smart Install gets the config to the new switch by telnet. Since a factory-new Switch can do telnet, the initial config comes from the director. It connects to the switch over a non-standard telnet port and issues the copy command to get the startup config from the tftp server. After that it does the same with the IOS. We can't really do anything because every interaction with the new switch stops the smartinstall process.
In your desscribed solution (I will test it later this week) it could be a working solution for deploying new switches.
In my Scenario however there currently seems to be no way to enable ssh when the startup config is the last known configuration from the switch that died, beacuse this startup config we cannot manually edit (it would defeat the purpose of this feature), since it is backed up by the director and the logic of deciding wheter or not this config is to be used runs on the director.
I am in contact with "our guys" from cisco, and they are trying to get feedback from the developer team of this feature. I will keep testing new releases for this issue and will report any progress.

HT201272 A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc. - Avinash

Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- Avinash

The purchases are probably hidden:
http://support.apple.com/kb/ht4919

Is there any way to enable SSH via Terminal in the OSX Installer utility list?

Hi guys, I've messed up my install a little on my internal HDD.. I can't boot into OSX as I keep getting kernel panics on boot. I was just wondering if there's any way I can SSH into my Mac Pro via the Terminal on the OSX Installer Utilities list.. I have a Macbook Pro to SSH from but I need a way to enable SSH via that Terminal "-bash-3.2#"..
I've tried to use the systemsetup -setremotelogin on command but I know SSH requires login keys and as I have no idea what can be used as those keys for the OSX Installer version of Terminal I have no idea how I can enable SSH..
Tried some sudo commands but as I guess it runs at a completely different level to sudo it won't actually recognise the sudo command..
Any help would be greatly appreciated guys, if you need me to post any info or results to help then just let me know.
Thanks alot
Chris

If your Mac cannot boot to the OS X installation then you will not be able to set up the SSH (Remote Login) sharing service. The OS X installer does not support any of the system's sharing services. Technically it does have the sshd daemon (server process) that you can set up to accept a connection; however, this will not give you any additional benefit.
The only reason to SSH into the system would be to get to the Terminal command prompt anyway, which is available when you boot to the Recovery HD partition and choose Terminal from the Utilities menu. If you were to set up SSH and log in, you would still only have the functionality provided by the Terminal in the Utilities menu, and not have access to your Mac's full OS installation.

Enable save for all users in rich client document defaultly for all users

Hi,
Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
Thanks,
Karthik

I'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one.

Enabling SSH on SG300-20

I had some issues with this, and was not able to find an answer in the help or searching the web. In order to help the next person, here are the instructions:
I have a brand new SG 300-20 switch, and I am attempting to add ssh to the login capabilities.
Using the web interface I have enabled SSH Service in the Security-TCP/UDP Services.
I am not able to access ssh, port scans (nmap) also do not show port 22 open.
The missing key is the generation of SSH crypto keys.
1. Using the web interface enabled telnet in the Security-TCP/UDP Services section
2. Log in via telnet
3. Traverse tree to : System Configuration Menu - Management Settings - SSH Configuration - SSH Crypto Key Generation
4. Choose the Execute action.
That's it.
ssh away !

Hi
I used your method to generate a RSA key.
I gotta say when i had a look at the algorithm used, as per the screen capture below.
I saw AES256 with Cipher block chaining.. sure looks pretty darn secure.
US government standards body produced the following;
http://csrc.nist.gov/publications/nistpubs/800-131A/sp800-131A.pdf
According to section 2 of that document i am pretty happy and not concerned, cipher block chaining of AES-256.
This is very strong encryption..
I have attached a SSH wireshark capture of my SSH exchange between my PC and my SG300-10P
If you get can figure my userid, i will absolutely forward this posting to the Cisco Small Business Switch Product management team for immediate action .
regards Dave

OCS 2007 Enabling Federation for all users globally

I've set up federation in OCS 2007 and it's working. The problem now is I need to make enable it en mass for my users.
I've searched all properties and can't find where I enable it for all users. The setting I'm looking for is equivalent to going in the users properties > Other Settings [configure] > and checking Enable Federation and Enable Remote access.
I'd hate to go through 300+ users to check this. Does anyone know where I can set this globally?
Thanks.

What are the odds of that...answered my own question.
I right clicked the users folder > configure users and it walked me through checking those options.
Hope it saves someone some time :)

Enabling SSH user equivalence resets umask to 0077

Hi,
I'm about to install Oracle 10g RAC on Red Hat Linux AS/ES 40 update 2. While configuring Secure Shell I noticed that after I enabled SSH user equivalence, umask gets changed from 022 to 077. Guess I could change umask to 022 before installing the software but is this supposed to happen?
Thanks,

I noticed umask had changed to 077 when I enabled user equivalence to log into a remote server without having to enter a password.
$ umask
0022
$ /usr/bin/ssh-agent $SHELL
$ /usr/bin/ssh-add
Enter passphrase for /home/oracle/.ssh/id_rsa:
Identity added: /home/oracle/.ssh/id_rsa (/home/oracle/.ssh/id_rsa)
Identity added: /home/oracle/.ssh/id_dsa (/home/oracle/.ssh/id_dsa)
$ umask
0077

How step by step enable ssh service in switch small bussines?

HI,
I upgraded Firmware on switch smallbussines 200, but I don't know how enable SSH.
Could somebody step by step how will do that?

Hi,
with SSH you can't connect by web browser, you can only connect to the cli.
If you want more security with your web browser enable https as shown in my first screen.
In your SSH configuration you set up an SSH user and password, is that the correct method you try to connect?
the more easiest way to connect is with an rsa public key, so server and client exchange the keys by themselves.
To do so, look at my second screen. Sry but i have only an sf302-08 for showing purposes, so i used your screen and marked the steps.
1. Delete the RSA und DSA key by marking them and klick on delete
2. Mark as user authentication "by RSA public key" and klick on apply
3. check the TCP/UDP services, SSH must be enabled manually (screen1)
4. reboot the switch
Now try to connect to the switch by putty or another ssh capable switch.
regards

Option to configure email notifications when designated numbers are enabled to forward all

Hello,
I have a general question about call forwarding. We have a lot of sites around the country and would like to setup automatic notifications if a site forwards their main line to voicemail. Does anyone know of an option in CUCM to configure it to send automatic email notifications when certain designated numbers enable/disable forward all to voicemail? Or does anyone know of any alter options?
Currently using CUCM 8.6.2
Will be upgrading to CUCM 10.5 in the coming months.
Thanks

Hi,
CUCM natively does not have such a feature. Call forward related specific events are logged in sdl traces which you can filter using some custom software to get the report generated as per desired frequency.
HTH
Manish

HT204053 how to enable icloud on all my devices

How do I enable iCloud on all my devices

iCloud requires you to have 10.7 or 10.8 on your computer. iCloud system requirements - http://support.apple.com/kb/HT4759. Note that "photo stream" requires iPhoto 11.
iCloud set up - http://www.apple.com/icloud/setup/.
on your computer - Click the apple / system preferences / iCloud - sign in with your iCloud Apple ID
If you have iPhoto 11, click the word "iPhoto" beside the apple and select "preferences", then go to the "photo stream" tab. Enable photo stream.

Stsadm Export "This constraint cannot be enabled as not all values have corresponding parent"

I am trying to export a sharepoint site using the command "stsadm -o export -url http://prefix.domain.com/sites/sitename -includeusersecurity -filename c:\sitename"
I have already done this on about 30 other sites. This site is failing on export with the following message.
[11/9/2009 3:39:39 PM]: FatalError: This constraint cannot be enabled as not all values have corresponding parent values.
at System.Data.ConstraintCollection.AddForeignKeyConstraint(ForeignKeyConstraint constraint)
at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign)
at System.Data.DataRelationCollection.DataSetRelationCollection.AddCore(DataRelation relation)
at System.Data.DataRelationCollection.Add(DataRelation relation)
at System.Data.DataRelationCollection.Add(String name, DataColumn[] parentColumns, DataColumn[] childColumns)
at Microsoft.SharePoint.Deployment.ListItemObjectHelper.GetNextBatch()
at Microsoft.SharePoint.Deployment.ObjectHelper.RetrieveDataFromDatabase(ExportObject exportObject)
at Microsoft.SharePoint.Deployment.ListItemObjectHelper.RetrieveData(ExportObject exportObject)
at Microsoft.SharePoint.Deployment.ExportObjectManager.GetObjectData(ExportObject exportObject)
at Microsoft.SharePoint.Deployment.ExportObjectManager.MoveNext()
at Microsoft.SharePoint.Deployment.ExportObjectManager.ExportObjectEnumerator.MoveNext()
at Microsoft.SharePoint.Deployment.SPExport.SerializeObjects()
at Microsoft.SharePoint.Deployment.SPExport.Run()
I checked the SharePoint logs and the error message in there is the exact same. Nothing is in the windows application error logs.
I looked at what it was trying to do before the error and it failed on a task list. I tried deleting the task list and trying again and it bombed on a document library next.
I did some googling and found a hotfix http://support.microsoft.com/kb/955594 I tried to install it, but I have SP2 installed and therefore it said that the expected version was off. Im assuming since I have SP2 and that hotfix is dated in 08 that it should be included in SP2 anyways.
Does anyone have an idea on what is going on and how to fix it? I am trying to migrate this sub site to a new server and set it up as a new site collection.

Good you caught that ... somethings would have shut down at the 90day mark...
Would you humor me and tell me what this does.. Note I changed the order of a few things, added a .bak to the filename and also added versions.
If this errors would go into the Windows Event Viewer and look for anything SharePoint related, then look at security logs and see if there are any errors.
stsadm -o export -url http://prefix.domain.com/sites/sitename -includeusersecurity -filename c:\sitename.bak -includeusersecurity –versions 4
Kris Wagner, MCITP, MCTS
Twitter @sharepointkris
Blog: http://sharepointkris.com

Enabling SSH on Cisco 4507

How do you configure ssh on Cisco 4507 ? I did "show ip ssh" and the log below is displayed as a result.
Router#show ip ssh
SSH Disabled - version 1.99
%Please create RSA keys to enable SSH (and of atleast 768 bits for SSH v2).
Authentication timeout: 120 secs; Authentication retries: 3
Minimum expected Diffie Hellman key size : 1024 bits
IOS Keys in SECSH format(ssh-rsa, base64 encoded): NONE
Thanks.

Hi,
Check this link..
http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml
aaa related commands are not mandatory. You can even use local authentication. Also, make sure the IOS supports SSH.
Do 'Shoe version' the IOS name contains 'k9' for crypto.
hth
MS

Enable SSH on all LAP's

Similar Messages

Maybe you are looking for