Enable user to change channels belonging to a task

Hi to all, I want to create a SubVI which enables the user to configure channels for a task. When the user finished adding channels to the task, the task should be returned to my main VI. I attached an image of the SubVi (I use the German version, but there should be no problem; if someone has a question, I'll try to translate).
Currently, I have to questions/problems which are connected to each other (in my view):
How can I find out and display the channels the user added to the task? I want to test whether everything works fine or not.
Even more important, the user should have the possibility to view which channels have been added and to rename them (and to change the scaling after I finished this feature).
Using Google, the forum search and the Labview Help did not help me to find a possibility to view which channels belong to a given task and edit them. Maybe someone of you knows something? By the way, if I have a mistake/something very ugly in my code, please tell me about it. I'm still learning LabView.
Thanks in advance.
Attachments:
channels_in_task.png ‏40 KB
createDAQtask.vi ‏12 KB

Hey daxel,
you can determine the channels in a task with a property node. Take a look at the attached VI, this will show you how.
If you want to know which channels are added by the user, you must know the channels before and after the edit. Than you can compare the information and find out the added channels.
I don't know if its possible to change the name of a task after you created it. If it's possible, than with a DAQmx property node like in the example.
Regards, Stephan
Attachments:
View channels.vi ‏9 KB

Similar Messages

Enable user to change date at runtime

Hi,
My requirement is to enable users to change date ( expiration date in my case) in bex report.
Can anyone suggest an approach for the same.
Regards,
Suchitra

changing any data after the report is executed will not have any effect since if you are running the report again all the data will be refreshed.
in your case the date field cannot be changed in the report,
else let me know if you are asking if the user will be able to change the date value in the variable screen of the report.
rgds, Ghuru

How to allow users to change password

I have enabled users to change their passwords in the Server.app for the Default Site with SSL, and who can access is a group of individuals.
When I load up the Server site, I am presented with
a Login to which I then add my username and password and I am then presented with
Welcome to OS X Server
OS X Server makes it easier than ever for the people in your organization to collaborate, communicate, and share information.
I Choose My Settings and the site is redirected to /changepassword of which a page comes
Forbidden
You don't have permission to access /auth/ on this server.
The Directory /Library/Server/Web/Data/Sites/Default/auth/ exists with the corret permissions. This is an empty directoy tho
Apache Logs:
Directory index forbidden by Options directive: /Library/Server/Web/Data/Sites/Default/auth/
I cannot get this to work. WIki's are turned on but that doesnt work either.
If I Launch /wiki, I am prompted to login, to with I do, and i just get a blank web page
Apache logs:
File does not exist: /Library/Server/Web/Data/Sites/Default/__collabd
This is on a new install of OSX server
Any Suggestions?

Hi,
On the landing page at the bottom it should say "change password".
That brings you to a forbidden page?
On my server I do not have the /auth/ folder in my default site, but my changepassword page does work.
Can you check if going to https://127.0.0.1/changepassword does work? It will give an SSL error.
Then it might be DNS related conflicting with another router/server in your network
Or... charge $ 5 per user to change his or her password personally
Goodluck!
Jeffrey
StarPine Support

How to allow a user to change Payment terms on A/R documents

Hi All,
I want to allow one of my user to change payment terms on A/R documents. I could'nt found it where to authorize a user for this purpose. Can anybody help me out with this?
BR

Dear Naveed,
To enable users to change the Payment Terms in A/R, please give the user Full Authorization for Price Lists (Inventory -> Price Lists -> Price Lists).
Hope this helps.
Regards,
Lorna

How to enable users change password in obiee 11g?

Is there anyone know how to enable users change password in obiee 11g?
And I have tried the method in obiee 10g, bu it didn't work.
Any help would be appreciate.

As per I understand your requirement,
In your Dashboard create a Presentation variable which receives the value of year you select.
Now in your analysis, select the year column along with all the measures you want (Actual, plan, Forecast, and what-if, etc).
Create a filter on Year column and convert it into SQL. Put the condition as:
"Year" BETWEEN @{Presentaion_Variable} - 1 AND @{Presentation_Variable}
You will get the result for selected year and the previous year.
Hope it helps..
Regards,
A.K.

Windows 2012 : A domain user who does not belong to the Administrators group can change the passwords

Hello,
Can a domain user
that does not belong to the Administrators group,
be able to change your password ?
I tried to create a domain user account
without administrative access. This user account have
permission to access Windows Server
2012 via Remote Desktop.
I tried to access the same account
to the Active Directory Users and Computers,
i was amazed, because the user account it can changed
the password for multiple accounts,
included one administrator account.
Best regards,
Ricardo

Hi Ricardo,
I agree with Martin, we can check the membership about this user account. Besides, we can refer to following steps to check the memberships:
Start the ADUC on windows 2012.
Right-click the user account and select
Properties, then click the Member Of tab.
Check which group is the user account belongs to.
In addition, i suggest you create a new user account, and check if the new account can change other user’s password.
Best Regards,
Erin

How to enable ebs users to change their own passwords.

Hi,
Is there any profile option which will enable the users to change their passwords on their own from EBS front-end applications...?

Hi,
Is there any profile option which will enable the users to change their passwords on their own from EBS front-end applications...?Users can change their password from the application itself (Edit > Preferences > Change Password).
If you want to force all users to change their password, see (How To Force All Applications Users To Change Their Password? [ID 414976.1]).
Also, see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=414976.1&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

WRT110 signal problems... change channel?

I have been having significant slowdown using my wireless router. Someone in a differfent post said he was told by comcast that his signal could be inconsistent because comcast uses the same channel, which causes interference. I too have comcast, so I want to try this. Unfortunately, the threads I've read only give directions up to accessing the Linksys administration tool and I cannot find any way to change channels once I get there.
When I get to the Wireless tab, I see manual and wi-fi protected options, and it is default filled to wi-fi protected. Option 1 [holding the wi-fi protected set-up button and hitting the button to the right] results in a failed attempt to contact the client device. Option 2 requires a PIN and I have no idea what that would be. Option 3 gives direction if my router asks for a client PIN number... no idea how to get to whatever point the router would ask for that info.
OTOH, if I click the manual setup radio button, I go to a page that only offers a few set-up options [Network Mode, Network Name (SSID), Radio Band, Wide Channel (only option is auto), Standard Channel (only option is auto), SSID Broadcast]. In other words, I can see no way to set to channels 1-6, 9, 11 as others have recommended.
What the heck am I doing wrong?
TIA

>Someone in a different post said he was told by comcast that his signal could be >inconsistent because comcast uses the same channel, which causes >interference.
First that is a bunch of crap. You WAN input is not on any 'channel'. Next don't ever hit the SES button (Secure Easy Setup) on the front of the router because you don't have the receiving hardware to take advantage of it. The wireless tab always defaults to WiFi Protected Setup but you always want Manual.
Never use the Linksys Admin Tool LELA. Always connect to your router via your wired computer to 192.168.1.1. Leave user name blank and input your password that you set (might be admin).
Under basic wireless settings:
Network Mode - BG Mixed (my setting)
SSID - your network name
Radio band - Standard 20Mhz
Wide channel - Auto
Standard channel - 1 (higher frequencies are not as reliable)
SSID - Enabled
Basic Setup Tab change MTU value to Manual 1492 if you have PPPoe, otherwise lower it to 1400.
Advanced wireless settings change Beacon Interval to 75, RTS and Fragmentation threshold to 2404.
Save settings and give it a try. Once your wireless is stable, go back and add security.
Message Edited by sabretooth on 12-01-2009 11:59 PM
Message Edited by sabretooth on 12-02-2009 12:01 AM

Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

Hi,
I added a list view web part into a SharePoint 2013 page and it is working as expected, except for one thing.
I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
Thanks in advance for the help.
Regards,
P.

Hi,
Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
In addition, here is a thread with similar requirement that might help:
http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support

How to enable user sets from tools in sales order

Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
Thanks

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

ISE 1.2 Guest portal user cannot change their passwords

I have a WLC 5508(version 7.6) and a server installed the ISE (version 1.2.1.198)，Now we configured the CWA，Use guest portal as an employee and guest login url，We can use the manually create internal user and password successfully logged in, and we set up allow guest users to change password in Multi-Portal, but the user can not change the password in the guest portal ,I suspect the change password option on the Guest Portal actually works? Can anyone tell me how to change their own username password in the guest portal ?

Requiring Guests to Change Password
You can allow or require guest users to change their password after their initial account credentials are created by the sponsor. If guest users change their passwords, sponsors cannot provide guests with their login credentials if they are lost. The sponsor must create a new guest account.
You can either allow guests to change their passwords, or you can require that they do it at expiration and at first login. To require internal users using a guest portal to change their password upon their next login, choose Administration > Identity Management > Identities > Users . Select the specific internal user from the Network Access Users list and enable the change password check box.
Before You Begin
Create a Guest portal or modify the DefaultGuestPortal. This setting is specific to each Guest portal.
Step 1 Choose Administration > Web Portal Management > Settings > Guest > Multi-Portal Configuration.
Step 2 Check the Guest portal to update and click Edit .
Step 3 Click the Operations tab.
Step 4 Check either or both options:
Allow guest users to change password
Require guest users to change password at expiration and first login
Step 5 Click Save .

Prevent a user from changing the Project ID in P6 EPPM 8.3.7

Does anyone know if there is a Global or Project Security Profile privilege that will prevent a user from changing the Project ID on an existing Project? We are using Primavera P6 EPPM 8.3.7
Thank you,
Eric

Hi,
Below project security profile may help you,
Edit Project Details Except Costs/Financials
Determines whether the profile will enable users to edit fields in General, Dates, Defaults, Resources, and Settings tabs in Project Details. To assign a project baselines, users must also have the "Assign Project Baselines" project privilege assigned to their profile.
Regards,
Marcos

TMG 2010 publishing Exchange 2010 OWA cannot change password if user must change password at first logon is set

Hi,
I have an odd issue whereby if I set "user must change password" on an AD account, the end user cannot logon, they're simply taken back to the OWA login page as if their password is incorrect.
My setup is as follows:
outer TMG -- uses a listener for email.contoso.com and is configured for no authentication.This uses a publishing rule to publish the inner TMG server. This server is not a domain member.
inner TMG - uses a listener for email.contoso.com and is configured for NLTM\kerberos negotiation with forms authentication (Windows Active Directory). This server is a domain member and use a publishing rule to publish the internal CAS. Allow users to change
password is selected in the publishing rules.
Exchange 2010 SP1 - uses integrated windows and basic authentication. Has the appropriate registry key configured to allow users to change their AD password on first logon.
I've registered an snp for "http/email.contoso.com mailserver-dc1", all SSL certificates being used are valid and my configuration used to allow users to login and change their password with "user must change password on first login"
set in AD.
If I launch a web browser on an internal server and point it to email.contoso.com I'm immediately presented with a generic Windows authentication request (similar to what's seen in ADFS) rather than the standard OWA page. No matter what I do, I cannot login
and change my password using the correct URL. However if I point my browser at
http://192.168.4.10/owa I'm prompted to login and I can change my password using the sam credentials.
The only recent changes made are:
- Disabling SSL 3.0 and enabling TLS (http://www.isaserver.org/articles-tutorials/configuration-security/improving-ssl-security-forefront-threat-management-gateway-tmg-2010-published-web-sites.html)
- Replacing the TMG listener certificates so that they now use SHA2 rather than SHA2 (certificates are trusted on each TMG server)
Looking on the outer TMG and the DC logs I can see schannel errors which I believe are related to the problem. TMG monitoring also shows "Failed connection attempt: 1907 The user'spassword must be changed before logging on for the first time"
I've checked that my inner TMG and DC are using the same certificate for server authentication and gone through this guide:
http://blogs.technet.com/b/keithab/archive/2012/02/29/setting-up-and-troubleshooting-ldaps-authentication-in-forefront-tmg-2010.aspx
If I try to use ldp.exe on the inner TMG, I get the error in the pic below
Thanks
IT Support/Everything

Hi,
You could try to analyze the TMG tracing and try the troubleshoot steps in the blog below.
TMG 2010 – FBA, troubleshooting the change password feature
http://blogs.technet.com/b/isablog/archive/2012/05/07/tmg-2010-fba-troubleshooting-the-change-password-feature.aspx
Best Regards,
Joyce

Where's the "Are you sure you want to change channels"window?

We used to have Dish and it had one amazing feature that AT&T doesn't have. When I have live tv paused or just rewound back a bit, and then I accidentally hit a number button or the channel up/down button, with AT&T the channel gets changed and I lose the show I was watching. So very infuriating. With Dish, a little window popped up that asked if I was sure I wanted to change channels and switch to live tv, click yes to change or no to stay where you are on the current channel. It's starting to become a deal breaker. Seriously considering switching back because of this one problem, it matters.

Bananapancakes wrote:
We used to have Dish and it had one amazing feature that AT&T doesn't have. When I have live tv paused or just rewound back a bit, and then I accidentally hit a number button or the channel up/down button, with AT&T the channel gets changed and I lose the show I was watching. So very infuriating. With Dish, a little window popped up that asked if I was sure I wanted to change channels and switch to live tv, click yes to change or no to stay where you are on the current channel. It's starting to become a deal breaker. Seriously considering switching back because of this one problem, it matters.
If that bothers you so much, switch back. There are no tuners like on Dish, here on Uverse, you just use upto four streams on IPTV. As soon as you leave a channel, the buffer is reset to that channel. You'll have no problems if you'd be a little more careful and set the remote in your lap and don't pick it up until ready to use.
If you want to pause a program, press Record to start it recording and can just watch the recording, will include everything in the buffer, so could go back/forth on the recording.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

Disabling user through API call -process task-followed by an Enable User...

Hi,
I am running on OIM 9.1 BP11. I implemented a process task to disable the user based on a URS form field change.
I can confirm from the log file and the resource that the Disable user (xellerate user) happened. But the user got enabled back right away. The log file showed that a scheduled task named "Enable User After Start Date" ran and enable the user. So, I disabled that scheduled task.
Then I repeated the test again. I observed the same behavior of user being disabled and enabled again but this time, OIM called an adapter. This is what I observed in the log file:
20988 INFO,20 Oct 2010 12:21:56,519,[XELLERATE.DATABASE],DB read: select evt.ev t_key, evt.evt_name, evt.evt_package, mil.mil_name from mil mil, evt evt w here evt.evt_key = mil.evt_key and mil.mil_key=10
20989 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.DATABASE],select evt.evt_key, ev t.evt_name, evt.evt_package, mil.mil_name from mil mil, evt evt where evt. evt_key = mil.evt_key and mil.mil_key=10
20990 INFO,20 Oct 2010 12:21:56,519,[XELLERATE.PERFORMANCE],Query: DB: 0, LOAD: 0, TOTAL: 0
20991 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.SERVER],Class/Method: tcBusiness Obj/getSqlOperationFromMembers entered.
20992 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.SERVER],Class/Method: tcBusiness Obj/getSqlOperationFromMembers left.
20993 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.ADAPTERS],Class/Method: tcADPCla ssLoader/getClassLoader entered.
20994 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.ADAPTERS],Class/Method: tcADPCla ssLoader/getClassLoader left.
20995 DEBUG,20 Oct 2010 12:21:56,520,[XELLERATE.ADAPTERS],Class/Method: tcADPCla ssLoader/findClass entered.
20996 INFO,20 Oct 2010 12:21:56,530,[XELLERATE.ADAPTERS],Adapter: Enabling the User was initiated for the task: Enable User.
20997 INFO,20 Oct 2010 12:21:56,531,[XELLERATE.JAVACLIENT],System Event Handler : Enabling the User
I did exactly the same disabling user process at another client and it worked fine. I don't understand what causes OIM to call this system Event handler to re-enable the user.
Please help.
Thanks
Khanh

Do you have any Entity Adapter or Event Handler or Trigger which enables user for some condition ?
Check your environment. If you have please remove that and try.
Does this user has and provisioned resource ? If yes, try for some other user which doesn't have resource provisioned.

Enable user to change channels belonging to a task

Similar Messages

Maybe you are looking for