Enabling ARCHIVELOG on windows

Hi I'm on Oracle 10.2.0.4.0 running on MS Windows and following the instructions to put my database (ORCL) in ARCHIVELOG mode.
It sounds like I need to perform the following to do this:
ALTER SYSTEM SET log_archive_dest_1='LOCATION=E:\oracle\admin\ORCL\arch' SCOPE=SPFILE;
SHUTDOWN IMMEDIATE
STARTUP MOUNT
ALTER DATABASE ARCHIVELOG;
ALTER DATABASE OPEN;
ARCHIVE LOG LIST
SHUTDOWN IMMEDIATE
STARTUP
So this is how far I've gotten...
From cmd.exe:
C:\>set local=ORCL
C:\>sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Dec 8 20:21:18 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
What am I missing here? Sorry I don't usually work with Oracle on Windows.
Thanks in advance for any help.

SET command output as requested...
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\user01\Application Data
AVENGINE=C:\PROGRA~1\CA\SHARED~1\SCANEN~1
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\user01
local=orcl
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=E:\oracle\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SHARED~1\SCANEN~1
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB=E:\oracle\perl\5.8.3\lib\MSWin32-x86;E:\oracle\perl\5.8.3\lib;E:\oracle\perl\5.8.3\lib\MSWin32-x86;E:\oracle\perl\site\5.8.3;E:\oracle\perl\site\5.8.3\lib;E:\oracle\sysman\admin\scripts
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 26 Stepping 8, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1a08
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=RDP-Tcp#40
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\user01\LOCALS~1\Temp\1
TMP=C:\DOCUME~1\user01\LOCALS~1\Temp\1
USERPROFILE=C:\Documents and Settings\user01
windir=C:\WINDOWS

Similar Messages

  • Enable Archivelog Mode On 2 Node RAC DATABASE

    hi,
    We are having 2 Node Rac 10g Database Installed on Windows.
    Currently the Database is in Non Archivelog Mode.
    I want to convert it to Archivelog Mode.
    I come to know the steps to convert cluster database to Archivelog mode.
    i.e.
    set archive parameters like Disk Location and Archivelog File format.
    then Convert the database in Exclusive Mode
    ALTER SYSTEM SET cluster_database=FALSE SCOPE=spfile;
    then
    C:\> srvctl stop database -d <Global_DB_SID>
    then enable Archivelog Mode.
    SQL> STARTUP MOUNT;
    SQL> ARCHIVE LOG START;
    SQL> ALTER DATABASE ARCHIVELOG;
    SQL> ALTER DATABASE SET cluster_database=TRUE SCOPE=spfile;
    SQL> SHUTDOWN IMMEDIATE
    C:\> srvctl start database -d <Global_DB_SID>
    But I am confuse with Do i need to RUN this commands in both the nodes seperatly or only on any one node.
    Please Reply,

    comments embeddedf
    Node 1: OSERP1
    Log on to OSERP1 Server
    C:\> sqlplus sys/oracle@racdb2 as sysdba
    SQL> ALTER SYSTEM SET log_archive_format='arch_%t_%s.arc' SCOPE=spfile ; -- this needs to be database wide
    SQL > ALTER SYSTEM SET log_archive_dest_1='location=\\OSERP1\archive$\ERP1 ' SCOPE=spfile sid ='ERP1'; -- required quotes added
    -- not required
    SQL> ALTER SYSTEM SET cluster_database=FALSE SCOPE=spfile;
    not required to connect to other node
    -- not required
    SQL> ALTER SYSTEM SET log_archive_format='arch_%t_%s.arc' SCOPE=spfile sid =ERP2;
    SQL > ALTER SYSTEM SET log_archive_dest_1='location=\\OSERP2\archive$\ERP2 ' SCOPE=spfile sid ='ERP2'; -- quotes added
    -- not required, and database wide setting
    SQL> ALTER SYSTEM SET cluster_database=FALSE SCOPE=spfile;
    Then following commands will be run connecting any of the instance
    -- database has to be stopped first, if you stick to switching it to a non-cluster database
    C:\> set ORACLE_SID=<local_instance_id>
    C:\> sqlplus / as sysdba
    SQL> STARTUP MOUNT;
    -- wrong sequence of commands
    SQL> ARCHIVE LOG START;
    SQL> ALTER DATABASE ARCHIVELOG;
    -- not required (see previous steps)
    SQL> ALTER DATABASE SET cluster_database=TRUE SCOPE=spfile;
    SQL> SHUTDOWN IMMEDIATE;
    6. Start the cluster database.
    C:\> srvctl start database -d <Global_DB_SID>
    -- There is no such thing as a <Global_DB_SID>. There is a database name.
    Please note your tnsnames.ora, in a standard install, needs to have the following service names.
    ERP
    ERP1
    ERP2
    I'm not sure why you have the non-standard service_name racdb2.
    Somehow it looks like you both don't understand the RAC concept, and didn't understand my answer. I had to correct several things I already corrected in my previous response. I'm not sure why I'm not getting through.
    Sybrand Bakker
    Senior Oracle DBA

  • Deploy a ear file from workshop-enabled weblogic on windows to solaris?

    Hi,
    I built a java ear application on my workshop-enabled weblogic in windows OS. I need to deploy it over into a solaris weblogic system. Does anyone have any idea if this is feasibe (as i was under the impression that the solaris version of weblogic does not come with workshop) and if feasible, how i can go about doing it? Many thks!

    If I omit the .jspx at the end of my URL, nothing's changed.
    Other ideas?
    Edited by: user10799119 on 26-ago-2009 5.42

  • I need my product key to enable to activate windows vista home premium and i can't see iton certific

    I need my product key to enable to activate windows vista home premium and i can't see it on Certificate of Authenticity label

    Once the label is worn, you cannot get another key for free. You are better to order a recovery disc set from HP, then you dont need a key
    You can order HP recovery media below, or call HP on the phone to order 1-800-474-6836
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
    If HP no longer has Recovery Media for your model, order them here
    http://www.computersurgeons.com/Default.aspx

  • How do I enable cookies on Windows 7

    Some sites do hold my password for access ( e.g. credit card) when I went to ' help'. the suggestion for firefox was to go to firefox then 'tools', etc. When I explored firefox and open the different windows I was not able to find tools. Further investigation I found similar instructions but it stated it was for Windows XP. So how can I enable cookies on Windows 7?

    Hi Esther.Applegate,
    Do you have the ''Firefox'' menu in the upper left hand side of the screen? If you do, hit ''Alt'' to temporarily enable the ''Menu bar''. Then go to ''Tools > Options > Privacy''. The article [[Enabling and disabling cookies]] will show you how to set an exception for that site.
    If you want the ''Menu bar'' on at all times, go to ''Firefox > Options'' and enable ''Menu bar''.
    Hopefully this helps!

  • How to enable hibernation in Windows Server 2008 R2

    Hi 
    I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
    but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
    Also checked with powercfg /energy & getting given below errors.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
    The hardware in this computer does not support the S3 sleep state.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
    The hardware in this computer does not support the S4 (Hibernate) state.
    Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
    PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
    with the hardware in this computer.
    Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
    Thanks.

    Hello,
    I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Deprecated parameter when enabling archivelog

    Hi all,
    11gR1
    I want to enable archivelog. So I set the ff:
    SQL> alter system set log_archive_start=TRUE scope=spfile;
    System altered.
    SQL> alter system set log_archive_dest_1='location=c:\oracle\apexdb\archivelog' scope=spfile;
    System altered.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup
    ORA-32004: obsolete and/or deprecated parameter(s) specified
    ORACLE instance started.
    Why is this obsolete error? and which parameter is obsolete? the log_archive_dest_1?
    Thanks....

    867699 wrote:
    Hi,
    I'm a beginner. I've gone through this thread. But i have a doubt. I don't have an Sp file ..how can i fix it with only p file.
    Pls help.
    ThnksThen you don't need the step to create a pfile from spfile. You are starting with the pfile, just as if you had created it from spfile.
    But after making the correction in your pfile, you really should make an spfile and start using it instead.
    1) make a backup copy of the pfile
    2) make whatever modifications you need to the pfile
    3) set ORACLE_SID
    4) sqlplus / as sysdba
    5) create spfile from pfile='nameofyourpfile';
    6) startup
    All this can be done from an idle instance - no need to be bouncing around from nomount, mount, startup, etc. See this:
    First, the contents of my dbs directory. Notice the init file initHOUSTON.ora, but there is no spfile (I renamed it to spfileHOUSTON.bak to get it out of the way)
    [oracle@vmlnx01 dbs]$ pwd
    /ora00/app/oracle/product/10.2.0/db_1/dbs
    [oracle@vmlnx01 dbs]$ ls -l
    total 6960
    -rw-rw---- 1 oracle oinstall    1544 May 21 18:56 hc_HOUSTON.dat
    -rw-r--r-- 1 oracle oinstall   12920 May  3  2001 initdw.ora
    -rw-r--r-- 1 oracle oinstall    1691 Jun 22 15:00 initHOUSTON.ora
    -rw-r----- 1 oracle oinstall    8385 Sep 11  1998 init.ora
    -rw-rw---- 1 oracle oinstall      24 May 21 18:56 lkHOUSTON
    -rw-r----- 1 oracle oinstall    1536 Jun 21 10:59 orapwHOUSTON
    -rw-r----- 1 oracle oinstall 7061504 May 22 18:49 snapcf_HOUSTON.f
    -rw-r----- 1 oracle oinstall    4608 Jun 22 11:56 spfileHOUSTON.bakSo check ORACLE_SID
    [oracle@vmlnx01 dbs]$ echo $ORACLE_SID
    HOUSTONThen connect as sysdba. Notice we connect to an idle instance, meaning we know it is HOUSTON, but it is not started, not even to NOMOUNT
    [oracle@vmlnx01 dbs]$ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 22 15:13:41 2011
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to an idle instance.and in this idle instance we can go ahead and create the spfile. No need to be in NOMOUNT or MOUNT
    SQL> create spfile from pfile='initHOUSTON.ora';
    File created.shell out and see the directory to confirm we create the spfile
    SQL> !ls -l
    total 6968
    -rw-rw---- 1 oracle oinstall    1544 May 21 18:56 hc_HOUSTON.dat
    -rw-r--r-- 1 oracle oinstall   12920 May  3  2001 initdw.ora
    -rw-r--r-- 1 oracle oinstall    1691 Jun 22 15:00 initHOUSTON.ora
    -rw-r----- 1 oracle oinstall    8385 Sep 11  1998 init.ora
    -rw-rw---- 1 oracle oinstall      24 May 21 18:56 lkHOUSTON
    -rw-r----- 1 oracle oinstall    1536 Jun 21 10:59 orapwHOUSTON
    -rw-r----- 1 oracle oinstall 7061504 May 22 18:49 snapcf_HOUSTON.f
    -rw-r----- 1 oracle oinstall    4608 Jun 22 11:56 spfileHOUSTON.bak
    -rw-r----- 1 oracle oinstall    4608 Jun 22 15:13 spfileHOUSTON.oraNow, from the idle instance do a full startup
    SQL> startup
    ORACLE instance started.
    Total System Global Area  285212672 bytes
    Fixed Size    1267068 bytes
    Variable Size  155191940 bytes
    Database Buffers  125829120 bytes
    Redo Buffers    2924544 bytes
    Database mounted.
    Database opened.and check that we used the spfile we just created
    SQL> show parameter spfile
    NAME     TYPE VALUE
    spfile     string /ora00/app/oracle/product/10.2
    .0/db_1/dbs/spfileHOUSTON.ora
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    [oracle@vmlnx01 dbs]$ exit
    logout

  • Powershell 2.0 already enabled on my Windows Server 2008 R2 SP1

    I have installed the Powershell ISE feature. 
    Is Powershell 2.0 already enabled on my Windows Server 2008 R2 SP1?
    In DISM /Online /Get-Features none of these pre SP1 exist in  SP1.
    DISM/Online/Enable-Feature/FeatureName:NetFx2-ServerCore
    DISM/Online/Enable-Feature/FeatureName:NetFx2-ServerCore-WOW64
    DISM/Online/Enable-Feature/FeatureName:MicrosoftWindowsPowerShell
     In  SP1 features NetFx3 exists but no MicrosoftWindowsPowerShell.
    How do I enable PowerShell 2.0?

    Hi Philpsophiae,
    By default, Windows PowerShell is not installed on a computer that is running Windows Server 2008 R2 Core. You can use the following methods to install Windows PowerShell on a computer that is running Windows Server 2008 R2 Core.
    How to install Windows PowerShell on a computer that is running Windows Server 2008 R2 Core
    Please feel free to let us know if these methods above are not helpful to you.
    Best Regards,
    Anna Wang

  • Enabling Pop Up Windows in Internet Explorer 5.2.3

    Does anyone out there still use Internet Explorer for mac or remember how. I use Safari, but have since had to download Explorer for one particular program that only works with Explorer. I need to view some reports and was told I could only do so if I enable pop up windows. For the life of me I can not figure out how to do this or if it is even possible.
    Any help would be greatly appreciated.
    Thanks!

    Thanks for the reply, but can you help clear something up for me? If I am able to view everything on this program with my mac such as catalogs, order lists, etc. why am I unable to view one part of it?
    Is it possible that mac can read part of a program, but not all, especially if the program is supposed to work exclusively with Explorer?
    It impossible to know the exact reason. It depends on how the site is programmed. It's possible for the site to check what web browser you are using and only work with the desired browser. It's possible to include ActiveX, a Microsoft thing, that will only run on a PC.
    There are a lot of Microsoft only features in IE that other browsers do not support. M$ adds these feature so you are forced to buy a PC to get the site to work.
    Is this a generally available site? Could you post the address?
    Have you tried FireFox? getfirefox.com
    Opera & iCab let you configure what browser they will emulate. You could try
    them.
    While an expensive solution, you could buy Virtual PC to run windows on you PPC. For the intel macs, you could get Parallels.
    Robert

  • Enable archivelog mode while datbase is open

    Hi everybody
    Kindly I need to ask if possible to enable archivelog mode while database in open status for oracle 11g? and if yes .. what is the statment?
    Thanks in advance
    Edited by: user11254543 on Jun 8, 2011 11:51 PM

    You cant enable the archivelog mode when the database is in nomount state because the archive log information is kept in Control file like db in archivelog mode or not,log sequence number,SCNs,logfiles members,etc.. When we start the database in nomount state then only the pfile/spfile is read and sga is allocated and background processes are started but no controlfile is read ..to read the controlfile the database must be started in mount state..Why we require a controlfile is because it stores critical information about the database...If we start the database in mount state then it recognizes whether database is in archivelog mode or not , If it is in archivelog mode then it sees whether an instance recovery is needed or not by verifying the log sequence numbers in controlfile,redologfile & the datafile ..If an instance recovery is required then it performs the instance recovery by calling smon background process or if a datafile header is not up to date then we have to perform the media recovery using the redo logfiles...
    For open state you have to post the reply..it will help you to explore yourself...Good Luck!

  • NB200 - How to enable WiFi on Windows 7?

    Hey,
    I've just bought a brand new Toshiba NB200 netbook (10-Z).
    When finished with the needed Win XP install, I installed the Windows 7 RC1, but the wifi is not working. The Fn+F8 Combination would start the wifi adapter, but the led in the outer side of the netbook is not blinking or anything, and system says, first I have to turn on the wifi, but I simply Can't, because the combination isn't working. I installed all the drivers, but still don't work.
    Sorry for the bad english, i'm Hungarian.
    Thanks, B3N1

    I installed seven directly, without even booting on the windows xp config shipped with the laptop
    the wireless was off, there was no way to enable it, even after following all the advises before.
    I had to reinstall XP on a second partition from the restore disc, and then the wireless was enabled, either on windows xp or seven... (but you could do the same thing from a standard xp install, you'll just have to install all the drivers)
    Altough I cannot switch the wireless off with the fn+f8 combo (or i can go to the xp partition, switch it off, and go back to seven... lol)
    I know seven was not officially supported and blah blah blah but it was really REALLY annoying, it was the first (and I hope the last) disappointment with the nb200. (PLL20C-00200C, canadian model)

  • Enabling archivelog  in RAC

    Hello dear friends,
    I want to enable archivelog mode in oracle 10.2 in RAC environment.
    who can help me in its steps ?

    Step how to convert noarchive log database in to archive log on ASM
    First take out the one instance from cluster to perform d maintenance tasks
    1)     SQL> alter system set cluster_database=true scope=spfile sid='approd1';
    2)     SQL> shutdown immediate
    3)     Start the single instance database which we took out from cluster pair
    4)     SQL> startup mount;
    5)     Check the log_archive_dest ,if its blank , which is good for us , otherwise we have to clear it values actually log_archive_dest is making archive log in local file system and log_archive_log_n , we can use it for both local , remote and ASM locations,so we will use log_archive_dest_1 instead of log_archive_dest
    6)     SQL >Show parameter log_archive_dest
    NAME TYPE VALUE
    7)     Log_archive_dest string D:\oracle\DB10g\admin\ORCL\arc
    Here in my environment the values of log_archive_dest is not NULL , so I have to reset the current values and put the null values
    8)     SQL> alter system set log_archive_dest='' scope=spfile;
    Any destination changes that you make take effect at the next log switch(automatic or manual) so restart the database and logon again
    9)     SQL> shutdown immediate
    10)     Again start the database in mount mode ( maintenance mode)
    11)     Startup mount
    12)     
    13)     Check the values of t again and make sure log_archive_dest should be blank or unset .We can’t use log_archive_dest or log_archive_dublex with db_recover file parameter , so that why I m using logarchive_log_1 parameter
    14)     SQL> alter system set log_archive_dest_1='LOCATION=+DATA/';
    15)     SQL> alter system set cluster_database=true scope=spfile sid='approd1'
    16)     Start the database
    17)     Startup

  • Unable to enable archivelog mode and flashback mode

    Hi,
    I have oracle10g installed on Linux machine.
    Everytime i try to enable ARCHIVELOG mode and FLASHBACK through the DB EM console and during the restart of the database, the database just startup and gets mounted, but does not get open. and not able to get the database to archive log mode.
    and when i startup the database through the sqlplus i get this following error:
    ORA-32004: obsolete and/or deprecated parameter(s) specified
    i am not able to enable successfully archive log mode and flashback mode.
    in sqlplus i did the following and got the following:
    SQL> archive log list;
    Database log mode No Archive Mode
    Automatic archival Disabled
    Archive destination USE_DB_RECOVERY_FILE_DEST
    Oldest online log sequence 13585
    Current log sequence 13587
    so i was thinking maybe it is the archive log start sequence that is creating error.
    because long back i had the database in archive log mode and because the archive log files got filled up, i disabled the archive mode and had to delete the archive log files.
    Can someone help me bring the database in archive log mode which i am not able to successfully execute.
    Thanks in advance,
    Philip.

    Hi,
    yes i looked in to the init.ora file and i got this
    orcl.__db_cache_size=1308622848
    orcl.__java_pool_size=167772160
    orcl.__large_pool_size=16777216
    orcl.__shared_pool_size=167772160
    orcl.__streams_pool_size=16777216
    *.audit_file_dest='/home/oracle/oracle/admin/orcl/adump'
    *.background_dump_dest='/home/oracle/oracle/admin/orcl/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='/u01/oradata/orcl/control01.ctl','/u01/oradata/orcl/control02.ctl','/u01/oradata/orcl/control03.ctl'
    *.core_dump_dest='/home/oracle/oracle/admin/orcl/cdump'
    *.db_block_size=8192
    *.db_domain='mslabs.noaa.gov'
    *.db_file_multiblock_read_count=16
    *.db_name='orcl'
    *.db_recovery_file_dest='/u02/flash_recovery_area'
    *.db_recovery_file_dest_size=64424509440
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
    *.java_pool_size=159383552
    *.job_queue_processes=10
    *.open_cursors=300
    *.pga_aggregate_target=562036736
    *.processes=150
    *.log_archive_start=FALSE
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=1687158784
    *.shared_pool_size=157286400
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='/home/oracle/oracle/admin/orcl/udump'
    and there is a
    *.log_archive_start=false
    so do i have to delete it?
    Thanks,
    Philip.

  • Error while enabling Archivelog mode

    There occurs an error while performing startup mount for enabling archive log mode in Windows.
    Below are the steps followed:
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Dec 20 16:49:14 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> disconnect;
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> connect sys@epm11 as sysdba;
    Enter password: ********
    Connected.
    SQL> archive log list;
    Database log mode No Archive Mode
    Automatic archival Disabled
    Archive destination D:\oracle\product\10.2.0\flash_recovery_area
    Oldest online log sequence 9
    Current log sequence 11
    SQL> show parameter recovery_file_dest;
    NAME TYPE VALUE
    db_recovery_file_dest string D:\oracle\product\10.2.0/flash
    recoveryarea
    db_recovery_file_dest_size big integer 2G
    SQL> alter system set log_archive_dest_1='location=D:\oracle\product\10.2.0\flash_recovery_area' sco
    pe=spfile;
    System altered.
    SQL> show parameter log_archive_dest_1;
    NAME TYPE VALUE
    log_archive_dest_1 string location=D:\oracle\product\10.
    2.0\flash_recovery_area
    log_archive_dest_10 string
    SQL> alter system set log_archive_start=true scope=spfile;
    System altered.
    SQL> show parameter LOG_ARCHIVE_START;
    NAME TYPE VALUE
    log_archive_start boolean TRUE
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    Oracle version information is
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 – Production
    Please let me know how to resolve this error.
    Regards
    Swathi.

    Hi,
    Add archive log_archive_dest_1 D:\oracle\product\10.2.0\flash_recovery_area in pfile and then try to start the database.
    Also check alert_log for more information.
    Added the below info in pfile
    log_archive_dest_1='location=D:\oracle\product\10.2.0\flash_recovery_area'
    log_archive_start=TRUE
    and then performed the process but the same error is giving.
    SQL> startup mount;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    And i have checked the alert log which is at location D:\oracle\product\10.2.0\admin\EPM11\bdump
    Below information is displayed in the alert log:
    Tue Dec 21 12:07:15 2010
    Starting background process EMN0
    EMN0 started with pid=19, OS id=7500
    Tue Dec 21 12:07:15 2010
    Shutting down instance: further logons disabled
    Tue Dec 21 12:07:15 2010
    Stopping background process QMNC
    Tue Dec 21 12:07:16 2010
    Stopping background process CJQ0
    Tue Dec 21 12:07:17 2010
    Stopping background process MMNL
    Tue Dec 21 12:07:18 2010
    Stopping background process MMON
    Tue Dec 21 12:07:19 2010
    Shutting down instance (immediate)
    License high water mark = 16
    Tue Dec 21 12:07:19 2010
    Stopping Job queue slave processes
    Tue Dec 21 12:07:19 2010
    Job queue slave processes stopped
    All dispatchers and shared servers shutdown
    Tue Dec 21 12:07:27 2010
    ALTER DATABASE CLOSE NORMAL
    Tue Dec 21 12:07:28 2010
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Tue Dec 21 12:07:28 2010
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Thread 1 closed at log sequence 12
    Successful close of redo thread 1
    Tue Dec 21 12:07:29 2010
    Completed: ALTER DATABASE CLOSE NORMAL
    Tue Dec 21 12:07:29 2010
    ALTER DATABASE DISMOUNT
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Dump file d:\oracle\product\10.2.0/admin/epm11/bdump\alert_epm11.log
    Tue Dec 21 12:20:46 2010
    ORACLE V10.2.0.1.0 - Production vsnsta=0
    vsnsql=14 vsnxtr=3
    Windows XP Version V5.1 Service Pack 3
    CPU : 2 - type 586, 2 Physical Cores
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:1439M/3062M, Ph+PgF:5441M/6994M, VA:1940M/2047M
    Tue Dec 21 12:20:46 2010
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 2
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =18
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.1.0.
    System parameters with non-default values:
    processes = 150
    __shared_pool_size = 201326592
    __large_pool_size = 4194304
    __java_pool_size = 4194304
    __streams_pool_size = 0
    spfile = D:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILEEPM11.ORA
    sga_target = 612368384
    control_files = D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL03.CTL
    db_block_size = 8192
    __db_cache_size = 394264576
    compatible = 10.2.0.1.0
    log_archive_start = TRUE
    log_archive_dest_1 = location=D:\oracle\product\10.2.0\flash_recovery_area
    db_file_multiblock_read_count= 16
    db_recovery_file_dest = D:\oracle\product\10.2.0/flash_recovery_area
    db_recovery_file_dest_size= 2147483648
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    dispatchers = (PROTOCOL=TCP) (SERVICE=EPM11XDB)
    job_queue_processes = 10
    audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\ADUMP
    background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\BDUMP
    user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\UDUMP
    core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\CDUMP
    db_name = EPM11
    open_cursors = 300
    pga_aggregate_target = 203423744
    Deprecated system parameters with specified values:
    log_archive_start
    End of deprecated system parameter listing
    PMON started with pid=2, OS id=1188
    PSP0 started with pid=3, OS id=5800
    MMAN started with pid=4, OS id=6212
    DBW0 started with pid=5, OS id=3920
    LGWR started with pid=6, OS id=496
    CKPT started with pid=7, OS id=5008
    SMON started with pid=8, OS id=692
    RECO started with pid=9, OS id=2924
    CJQ0 started with pid=10, OS id=1840
    MMON started with pid=11, OS id=5520
    MMNL started with pid=12, OS id=5212
    Tue Dec 21 12:20:47 2010
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    starting up 1 shared server(s) ...
    Tue Dec 21 12:20:47 2010
    alter database mount exclusive
    Tue Dec 21 12:20:51 2010
    Setting recovery target incarnation to 2
    Tue Dec 21 12:20:51 2010
    Successful mount of redo thread 1, with mount id 3057552735
    Tue Dec 21 12:20:51 2010
    Database mounted in Exclusive Mode
    Completed: alter database mount exclusive
    Tue Dec 21 12:20:51 2010
    alter database open
    Tue Dec 21 12:20:51 2010
    Thread 1 opened at log sequence 12
    Current log# 2 seq# 12 mem# 0: D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\REDO02.LOG
    Successful open of redo thread 1
    Tue Dec 21 12:20:51 2010
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Tue Dec 21 12:20:52 2010
    SMON: enabling cache recovery
    Tue Dec 21 12:20:52 2010
    Successfully onlined Undo Tablespace 1.
    Tue Dec 21 12:20:52 2010
    SMON: enabling tx recovery
    Tue Dec 21 12:20:52 2010
    Database Characterset is WE8MSWIN1252
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=16, OS id=6268
    Tue Dec 21 12:21:00 2010
    db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Tue Dec 21 12:21:00 2010
    Completed: alter database open
    Please provide me solution.
    Regards
    Swathi.

  • How to enable hibernate in windows 7 x86

    Hi
    hibernate feature is not enabled on my system.
    "hibernat after" and "Allow Hybrid Sleep" does not exist in the below directory:
    Power Options>Sleep
    I when typed "powercfg /hibernate on" OR "powercfg -h on" in administrator CMD, Show below message:
    Hibernation failed with the following error: The request is not supported.
    The following items are preventing hibernation on this system.
    An internal system component has disabled hibernation.
    I when typed "Shutdown /h" OR "Shutdown -h" in administrator CMD, Show below message:
    Hibernation is not enabled on this system. You must enable hibernation in order
    to use the -h option.
    hiberfil.sys file does not exist in root windows drive.
    Please Help me
    Thanks

    Hi,
    you cannot use hibernation if booting from VHD also you will need hardware that support the required standards (modern hardware does) and have up-to-date drivers
    you could force hibernation to on by setting key HKEY_LOCAL_MACHINE\SYSTEM\CurrentCongtrolSet\Control\Power\HibernateEnabled to 1
    MCP/MCSA/MCTS/MCITP

Maybe you are looking for