Enabling Buttons

I have disabled buttons on a page using a function and want to enable them after pressing a create button on the same page. I am trying to use another function call for the enable buttons but the create button is tied to a process and branch.
What is the best way to call the function and have the process and branch still work.
tks...Chris

Hi Shijesh,
I am using version 3.12 and have updated the enable_button() function with doSubmit('SUBMIT'); as you recommended.
I also have my Insert Process setup with a Conditional Processing {Request = Expression1 (SUBMIT)}. My Branch is also setup with a Conditions {Request = Expression 1 (SUBMIT)}.
I am getting the following error message related to the doSubmit('SUBMIT');
ERR-1777: Page 5 provided no page to branch to. Please report this error to your application administrator.
Do you have any recommendation?
tks.. Chris

Similar Messages

  • After updating to v. 24.0 (and restarting) ALL add-ons (regardless whether they work or not) are marked "(disabled)", and clicking Enable button does nothing

    After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
    Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
    Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
    Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
    Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"

    You're welcome
    Are this screenshots from an extension window because the built-in about:addons page looks different?

  • "record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present.  Same with "input moniter".

    "record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present.  Same with "input monitor".

    Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

  • How to enable buttons

    Hi Friends
    How to enable buttons like "ship confirm , print Doc set , Action , Go "
    In order management shipping transaction i just query using my trip no# xxxxx... but i am seeing some of the buttons are diabled how can i enable them ? In which responsibity do i want to go for enabling it ?how to enable please suggest me
    Thanks
    AT

    Hi Friends
    Yes i got it by navigating to SET UP >Grands and role definition >grand we can define the user name and set the role as upgrade role ...by this we can make the button ennable or disable for the paricular user
    (Iam posting this solution since other can get benifited )
    Thanks
    AT

  • I'm not able to get the Enable button on Filevault

    I'm not getting the Enable button on Filevault 2 in order to add more users to the system. It's simply just not there.
    file://localhost/Users/dtservice/Desktop/Screen%20Shot%202013-10-23%20at%205.44. 53%20PM.png

    I have the same issue. I am logged in as the admin user and would like to add an additional user to unlock FileVault on OS X Lion (10.7.5) but the "Enable Users" button is not present on the FileVault tab.

  • Record Enable Button

    I've followed the manual, but I still can't get the record enable button to appear on my audio tracks.Can you help?

    What do you see on your audio tracks?

  • Pressed Enabled Button color

    Hi all,
    I would like to change the color of a "Pressed enable button".
    I see the possibility to change the color under the next option:
    "Simple Elements ->Buttons ->Standard Buttons ->Standard Backgroud Color"
    This option supposes changing the color of Standard buttons (unpressed & pressed) but it only changes the Unpressed buttons.
    Could it be an issue? or is there other possibility to change the color of a "Pressed Enable Button"???
    Regards, Fede

    Hi,
    The Browse button is defined by the browser itself and doesn't have a tag that you can style. You could try: [http://www.quirksmode.org/dom/inputfile.html] but it's a heck of a workaround!
    Andy

  • I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

    I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

    Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
    At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices  to remedy the problem.
    In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

  • Record enable buttons missing on Audio track headers!?

    They were there previously. There is even an empty space for them which disappears when I uncheck the record enable button when I go to configure track headers window. If this has happened to anyone, please tell me how to get them back. This now on all projects (9.01).
    Thanks, Confused

    Yep, this has changed in L9, as you can now choose different devices for In- and Output you will miss the recording buttons if you don't have an Input selected.

  • 10.0.5 update has removed "record enable" button

    Ever since the update I can no longer record any audio with my blue microphones yeti mic. The "record enable" button that is usually visible in the track header area has disappeared even when enabled in track header configuration. I have also messed with the audio preferences settings but cannot get the button to show up. Please help report this bug to apple using the following link!
    https://www.apple.com/feedback/logic-pro.html
    Thanks!

    Update: Apparently both M-Audio and Alesis have gone 'missing in action' over this issue on the net/forums.. but here are the phone numbers to contact M-Audio support directly for anyone wishing to do so..
    M-Audio USA & Canada
    Phone: 401-658-5765
    Hours: Monday - Friday 8:30AM - 6:30PM EST
    M-Audio Germany
    Phone: +49-2154-81299-20
    Hours: Monday - Friday 9:00AM - 5:00PM CET
    M-Audio UK
    Phone: 44(0)1252-896040
    Hours: Monday - Friday 9:00AM - 6:00PM BST
    M-Audio Brazil
    Phone: +5511 - 3222-6476
    Hours: Monday - Friday 9:00AM - 6:00PM BRT

  • No record enable button

    Hi, there is no Record Enable button between the Mute and Freeze button. I can't for the life of me remember how to put it there and can't find it in the reference guide or within the forum. How do I make it show up in the Track List?
    Many thanks, Ros

    Thanks a million Steve. I'm not a Garage Band user, but today I was able to record directly into it using the Built-in Input. It automatically set the source as "Stereo 1/2 (Built in input)", so at least I know that the computer Audio Input is working.
    I don't know how to load it as a Logic project, but I saved it as a "Compact Project" to export it to iTunes. Then I imported the audio file into LE. I have the audio file, but not the Record Enable button.
    So finally, I re-installed LE....guess what? Still no Record Enable button, not even in the Tutorial song. I used the Logic Set-up assistant again and chose Built-in input as the driver, rebooted. It tells me it will use the Built-in Inputs as it starts up. It shows Built-in input as the driver in the Core Audio LE preferences, but shows No Input in the arrange window when the Audio track is selected. If I touch Built-in input (as the driver) in the Core audio LE preferences, it disappears from the list of drivers (the only other one is Built-in Output) and asks me to reboot to launch CoreAudio, then the whole process starts over again.
    I did a fairly extensive search in the forum (several pages) before posting my question, but I'll go back through it again.
    The LE7 Manual just states that you should click the record Enable button on the Arrange channel strip. The problem is, it ain't there!
    I really appreciate your assistance and calling up your friend all.
    Thanks, Ros

  • Record enable button disappeared Logic Pro X

    I have been using Logic Pro X for several months without any problems but now the Record Enable Button has disappeared.
    There is a space where it should be. If I choose "Hide Record Enable" the space disappears, but choosing "Show Record Enable" results in only a blank space where R used to be.
    I have checked my hardware settings and my audio input appears like it should.
    The problem is not appearing on my MacBook so I tried creating a new file and importing it to my desdtop Mac (Mini), but when I did this the Record Enable button promptly disappeared.

    Well, yes.. but thats how you are meant to assign/select an Audio device in every version of Logic... going back several major versions now. You had to have done that in Logic Pro 8 or 9 in the past.. You probably just forgot you had to do so initially.
    Anyhow...
    The problem described in this thread was caused by incompatible drivers and a change made to LPX during an update...
    ...and was not caused by the OP failing to select the Audio interface correctly in audio prefs in the first place...
    Cheers..
    Nigel

  • Record enable buttons have disappeared from audio tracks

    The record enable buttons have disappeared from audio tracks.  How do I get them back?

    Try control- or rightclicking a Track Header and...

  • Record enable button on garageband

    unable to find the record enable button in the track header on garageband

    Same problem.  I have an Onyx 1620i mixer, late-2013 Macbook Pro.
    Core Audio on the Macbook recognizes the Onyx and its multiple tracks.
    When I create a track in Garageband (using Microphone/Line option) then during setup Garageband asks me to select which of the 16 channels on the Onyx I want the track to record.  The track then shows input level bouncing around as sounds are made on a mic connected to the mixer on the appropriate channel.
    Everything seems to be working fine!  Except no Record Enable button appears on the track.  Can't record the audio that appears to be coming into the computer just fine.
    I am aware that there are issues with Mackie mixers after OSX 10.7.1 (or 10.8 with some models).  Mackie hasn't bothered to keep up to Mavericks.  However I didn't think the issue was "doesn't work at all", but that there were some latecy problems that can cause hiccups.
    So, despite appearances Garageband can't record from this device?  Or am I missing something else to record-enable a track?
    Thanks in advance for any advice about resolving this, or even advice about an excellent Mavericks-capable device that will allow me to mix about 16 external inputs into the Macbook Pro.

  • Norton toolbar doesn't work on desktop but does work on laptop. Desktop shows toolbar disabled but there is no "enable" button

    The Norton toolbar does not appear on my desktop version of Firefox 24.0. It does appear on my laptop version of Firefox 24.0. The desktop shows that Norton was disable as incompatible with 24.0. But there is no "enable" button. How do I get Norton toolbar back?

    Hello,
    It sounds like you may be using different versions of the Norton toolbar. The one on the desktop must be older and not updated for v24 of Firefox. The one the laptop must be newer.
    See here for where to get the latest version of the Norton toolbar:
    https://support.norton.com/sp/en/uk/home/current/solutions/v58055475_EndUserProfile_en_us
    On a side note v24 of Firefox is no longer the latest version. To get the latest security updates you should update to v25. See here:
    [[Update Firefox to the latest version]]
    I hope this helps. Let me know if not.

Maybe you are looking for

  • Alignment problem using TOP_OF_PAGE w/cl_gui_alv_grid

    Hi, I copied ZRNBCALV_EDIT_03 and made the following changes: 1. In class lcl_event_receiver, added a public method: public section.     methods:       handle_data_changed          for event data_changed of cl_gui_alv_grid              importing er_d

  • JCo Monitoring

    Hi All,      We want to make sure that the JCo’s are up and running, so we want to create a webdynpro application that can test each JCo and return a success or failure flag.   Is there any way to pick up all the JCo's  and the application dynamicall

  • Recovery disc for pavilion/dvl6604cl

    Please tell me how to order a recovery disc for the pavilion dl6604cl notebook.  My harddrive has failed and the Geek squad needs the recovery disc to get my notebook back on line.  I can't find where to order the disc.

  • How to call a method if I have a name of a method in String format

    Hi Guys, I need an idea how to replace this large code. It has more then 50 else-if in a row if ((readerElement.getFunction()).equals("clickButton")) { testFrameWork.clickButton(); }else if ((readerElement.getFunction()).equals("clickButtonWait")) {

  • Getting clob

    A Run-Time error is raised by Visual Studio 2005Prof in my code when reading column of type clob and assigning its value to a std::string. This is the code:      void GetClob( unsigned int col, std::string & clobStr )           if( resultSet_->isNull