Enabling BW reports for a specific port
Hi All,
How to enable BW reports for a specific prot?.
Our requirement is Report should run FIRST, if I type the URL manually with the port we configure in SICF.
Thanks in Advance.
Regards,
Ravi Chelikani.
Ravi,
the port is configured per protocol (HTTP, HTTPS, etc) in transaction SMICM.
Regards,
Marc
SAP NetWeaver RIG, US BI
Similar Messages
-
No Data to display in Application failure report for a specific Application
Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi SHi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
WCS Lobby Ambassador audit report for a specific period of time
Hi all,
I know there is an WCS audit report for each lobby ambassador activities. But the problem is that I see only activities from Nov 9 to the present. I don't know what the reason is, whether somebody erased that information before Nov 9 or something else happened.
Is there any option to manually configure a specific period of time, for example obtain all activities for last 3 months?
Thanks for any hint.
JozefHi Koti,
What error did you meet when you used audit report from Oct 16 to Oct 31?
Please check the log file to find more information about this issue. The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS. You can check the log file whose modified date is from Oct 16 to Oct 31.
In addition, please deactivate and reactivate Reporting feature at site collection level.
A similar post for your reference:
http://sharepointknowledgebase.blogspot.com/2012/07/unexpected-error-when-trying-to-view.html#.VG2cFouUeog
About audit log report, please take a look at:
https://support.office.com/en-us/article/Configure-audit-settings-for-a-site-collection-a9920c97-38c0-44f2-8bcb-4cf1e2ae22d2?ui=en-US&rs=en-US&ad=US
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Network ACL for two specific ports
As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.
I'd like a HTTP port and an SMTP port open for the local loopback address. These are ports 7777 and 25. It's my understanding that you can have only one ACL per host. While it seems you can create more, any additional ACL's for the same host don't always work as expected. So does anyone have any advice as how I can do this? I'd rather not have every port between 7777 and 25 available but this is what I currently have...
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(
acl => 'local_loopback.xml'
, host => '127.0.0.1'
, lower_port => 25
, upper_port => 7777
);Billy Verreynne wrote:
As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.>Not so in my experience. An ACL can be for a specific target, but contain multiple ports for that target.
E.g. I assign ports 80, 7777, 8080, and a few others, in a single web-acl.xml, to a network target (host or domain).
Read the usage notes in Oracle® Database PL/SQL Packages and Types Reference.>Thanks I'll try that. I think we had problems in the past with separate ACL's containing rules for the same host, the response we got back from support was not to do that. This way didn't occur to me. -
Problems running a report for one specific customer
We have a portal where our external customer are login in using their customer number together with a pw. When logged inn they are running a specific report (custom made). Our issue today is that the customers have access to all other customers, thereby able to run reports for other customers as well. We want to set a parameter id so the report is locked only to the logged in customer. Anyone know how we can to this?
RegardsIt all depend on your custom made report. WHat has it been developed in. Is it an ABAP report/BI Report.
Make sure your report accepts say eg a Customer Id parameter. Then we can create a wrapper iview to pass the Customer Id. -
Stock report for a specific date.
Hi Gurus,
Can any one please tell me if there is any option is SAP by which i can get the stock status for a particular day. I mean if i want to check what was the stock report on last week some day, is there an option in SAP to do that. This report should give the stock of that day and any movements after that day should not be included in that report, for example if 10 quantity of a material was available on 26/03/09 and 5 were either moved or consumed, can i get the status in past for 26/03/09 today as quantity 10 rather than quantity 5 which is available today.
Regards
Anoophi,
Try with t.code MB5B -Stock on Posting date. You can get what you want.
Regards,
Prasath -
Unable to generate report for a specific user
Hi all,
I have a simple report in Agreements screen. The report is working fine when i Use another developer's id. But when i login using my Id and click the reports icon, it throws the following error.
" SBL-DAT-00382: The same values for '<?>' already exist.
If you would like to enter a new record, please ensure that the field values are unique. "
i have tried generating the report for the same agreement id. The report throws the error only when my login id is used and succesfully generating for other ids.
Pl help me understand.
Thanks
Sri978849 wrote:
Hi all,
I have a simple report in Agreements screen. The report is working fine when i Use another developer's id. But when i login using my Id and click the reports icon, it throws the following error.
" SBL-DAT-00382: The same values for '<?>' already exist.
If you would like to enter a new record, please ensure that the field values are unique. "
i have tried generating the report for the same agreement id. The report throws the error only when my login id is used and succesfully generating for other ids.
Pl help me understand.Understand that this has nothing to do with Oracle Application Express (APEX) which is the topic of this forum. Why have you posted this here? -
How do I generate a visitor report for a specific web page?
I want to look at the traffic/visitors who go to a specific page. Despite my searching the knowledge base, I can't see how to do this. To me, this is 'Web reports 101' - ie, a basic requirement, but it doesn't seem possible?
Appreciate any advice.
ThanksThis might help:
http://msdn.microsoft.com/en-us/library/ms252067(VS.80).aspx
Ming Man -
Getting error while refreshing a Webi reports for a specific universe
Hi Experts I am trying to refresh a WEBI Report but getting this error: A database error occured.
The database error text is (cs)"Specified network layer is invalid" Previously this was working fine...
from today itself I am getting this error
My DB is DB2 DB Drivers: DB2 V9 ->JDBC DriverTest Connection is always successful...
Not sure whats wrong -
How to enable "ValidateXML" for a specific Composite/process in 10g BPEL?
Hi ,
In *11g*, from em console, Its possible to enable/disable the XML(payload) validation both at server & just for a specific composite/process level. In case of *10g*, from the BPEL console, we could only enable/disable the XML(Payload) validation at *"domain/server"* level, but how do we enable/disable the payload(XML) validation only for the specific composite/process, instead of domain/server level? Is it possible in 10g? If yes, could you please throw some light on the same?
Thanks in advance!
Regards,
Srinivas MedukonduruHi Arik,
Thanks for providing the detailed steps.
Looks like these steps needs to be done from the JDeveloper and then redeploy the composite/process. Is it possible to enable the *"validateXML"* for a specific composite/process from the *10g BPEL Console?* So that we can avoid the code level changes & also the redeployment.
Thanks & Regards,
Srinivas Medukonduru -
No data in Application failure Analysis report for a particular application alone.
Dear All,
We are not able to get the data in Application Failure Analysis report from Appadvisor for a particular application(say ABC) alone, whereas it works fine for different application. Also,we could get the data from other reports(such
as Application status,Problem distribution analysis,etc) for the same application(ABC). PFB snapshot for your reference.
Thanks in Advance.
Regards,
Rajesh Kumar CHi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
URL in email to a report on a specific record
Hi - I have setup an email notification process that will send a URL to bring the user back to a report for a specific record. The link is bringing me back to the right page, but there are no results for the report.
How do I go to the page AND run the SQL in my report specific to that record?
A. Page Process for email:
declare
l_body_html varchar2(4000);
begin
l_body_html := '<p>A new order, number '||:P21_REQ_ID||' has '||
'been placed. To review and fulfill this order, click the '||
'link below.[/p><p>[a href="http://'||OWA_UTIL.GET_CGI_ENV('HTTP_HOST')||
OWA_UTIL.GET_CGI_ENV('SCRIPT_NAME')||'/f?p='||:APP_ID||':100:::::'||':P21_REQ_ID:'||
:P21_REQ_ID||'">View Order '||:P21_REQ_ID||
'</a></p>';
HTMLDB_MAIL.SEND(
P_TO => '[email protected]',
P_FROM => '[email protected]',
P_BODY => l_body_html,
P_BODY_HTML => l_body_html,
P_SUBJ => 'Service Request # '||:P21_REQ_ID);
end;
*B. URL after clicking the link in the email (goes to correct page, but no results):*
http://MyServer:7777/pls/apex/f?p=149:100:3573333726951794:::::P21_REQ_ID:42
*C. SQL for report on page 100:*
select "SR_REQUESTS"."REQ_ID" as "Request ID",
"SR_REQUESTS"."REQ_NAME" as "REQ_NAME"
from "SR_REQUESTS" "SR_REQUESTS"
where "SR_REQUESTS"."REQ_ID" = :P21_REQ_ID
Edited by: mterlesky on Oct 7, 2008 1:56 PMYou have one too many colons in the f?p URL.
Scott -
Create a MSDS for multiple Specifications via New Program
Hi Friends
I want to develope a new program, which will create MSDS (report) for multiple Specifications in Multiple languages and multple Generation variants.
I can pull out specifications, Generation Variant and Languages for selection.
My issues is what is standard FM or program which can be used to create report which can be utilized in my ABAP report.
Can you please guide.
With Warm Regards
Mangesh PandeDear Mangesh
use an "UserExit" as described here:Customer Exits in SAP EHS MANAGEMENT (Exit: C1020001 EHS: Menu exit 1 of substance management/C1020002 EHS: Menu exit 2 of substance management) and establish first an user interface. Don't create e.g. own transaction etc. Use the realy nice enhancement options using these "Exits".
In the background you can use function modules e.g.. as mentioned here: WWI for Experts
C12J_WWI_RAW_REPORT_GENERATE
C12J_WWI_RAW_REPORTS_CREATE
C.B. -
Automating a report for non-Crystal Reports users
Post Author: dmdouglas
CA Forum: Formula
I using version 8.5. Several people I generate a specific report for would like to be able to run it themselves rather than ask me to run it for them. As they are not Crystal Report users, is there a command that will ask the user to input information that will be used to generate a report for a specific month when they run the report, rather than having to go into the select criteria to put in the date they want? For example, if they wanted a report for March, they would just have to answer a prompt like "What month?" and the program would put their response in a variable to calculate the period desired for the report.Post Author: V361
CA Forum: Formula
Not sure for 8.5, but in later release's you add a parameter, the parameter does the prompting "Sort of", then you set the select statement to use the parameter. Parameters will have ? as part of the field name. ie...
= { ?Date_Parameter} -
Hi All,
I would like to create a report for a specific date for Gross orders.
Is there any way?
Thanks in advance.
Regards,
Rianka.Hi,
Yours is a special requirment for which a customized report can be prepared with the help of your ABAPERS .
you have to decide how you want the programe to respond w.r.t your Input fields and what is the formate of output , then based on that you need to create and give Functional specifications (FS) to your Abapers.
In FS you have to draft a process logic using Feilds and corresponding tables.
Please ref. SAP.Help for more Information w.r.t FS.
reagrds
DSR
Edited by: D.Srinivasa Rao on Nov 11, 2011 12:58 PM
Maybe you are looking for
-
My itunes has stoped working it says some files are missing
My Itunes has resently stopped working it says that some fiiles are missing i cannot access it and i do not know what to do
-
Database Aplication Tables Reconciliation in real time
Hi. Is there a way to get database aplication tables trusted reconciliation in real time? I mean, If I add/update a row to a table in the trusted source, some type of agent calls an API in OIM which gets the added/updated row (and creates the user) T
-
Use of prompted hierarchy's base members in Script Logic
Hello all, I have a data manager package which prompts the user for a dimension called P_BUDGET_MODEL. The prompt is SELECT hence the user selects a hierarchy node on this dimension. In the relevant Script Logic I have a variable %P_BUDGET_MODEL_SET%
-
How to create a new menu item.. please help
hi every one.., i bought a new 30GB ipod .., i would like to create a new menu item in the ipod and wanna generate all my content whichis in my database to this newly created menu item in my ipod.... any reply to this will be greatly appreciated.. th
-
How do I download Adobe Flash Player11.0 Installer using firefox?