Encoder reading error

Hi,
I just started using labview today, and its for my final year project to control a rig built similar to the QNET VTOL Trainer (http://sine.ni.com/nips/cds/view/p/lang/en/nid/210173)
I have a very simple VI which reads only the encoder position, it was working fine before, however now i seem now the readings just seem to increase and they dont reset. I was hoping someone can enlighten me where I am going wrong or if the encoder itself is faulty.
I have a NI9401 in bay 6 of the cDAQ 9178 and I am using Labview 2010.
The encoder model is Avago HEDS 5640
Hope someone can englighten me on this.
Thanks
Attachments:
Encoder error 2.jpg ‏13 KB
angular position.vi ‏43 KB
Encoder error 1.jpg ‏30 KB

Hi ayamkeren,
Thanks for your post and welcome to the forums!
If you start the VI without moving the encoder, what values does the VI start with? What sort of values are you expecting and how do they change?
When it was working before, did you find that if you close down labview and re-open the VI are the encoder values correct?
Regards,
Ben B.
Applications Engineer
National Instruments UK & Ireland
"I've looked into the reset button, the science is impossible!"

Similar Messages

Encoding failed: MXF read error in "/Volumes/....../947_1038.MXF" at frame -1 ??????

Hi,
Since yesterday when trying to export files from Première Pro CC to AME, almost 50% of the files are failed. I got this message in the log :
" - Source File: /Users/..../Library/Caches/TemporaryItems/DERUSH_AHA_18.prproj
- Output File: /Users/......./Movies/ADOBE EXPORTS/AHA_WS1-Social impact_DERUSH_480p25_Br2_128.mp4
- Preset Used: DERUSH_480p25_Br2_128
- Video: 480x270 (1,0), 25 fps, Progressive, 00:50:00:00
- Audio: AAC, 128 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 2.00 Mbps, Max 2.00 Mbps
- Encoding Time: 00:04:33
03/23/2015 06:26:42 PM : Encoding Failed
MXF read error in "/Volumes/Promise Pegasus/P_ADOBE_MEDIA/2015-Projects/0007_EIP_AHA_CNECT_2015-03-05/01_Footage/XDCAM_201503 09_100655/Clip/947_1038.MXF" at frame -1. "
First time I got this kind of message, AME was working just fine with all kind of presets and files.... Why is he trying to look after "FRAME -1" ????
Mac Pro 2013:
Model Name: Mac Pro
Model Identifier: MacPro6,1
Processor Name: 12-Core Intel Xeon E5
Processor Speed: 2,7 GHz
Number of Processors: 1
Total Number of Cores: 12
L2 Cache (per Core): 256 KB
L3 Cache: 30 MB
Memory: 32 GB

That dreaded sheep!
While I would still want more RAM for AE to operate off, I dont think that is the problem. The only other thing I persoanlly can suggest is that that is an installation error on AME.
Uninstall all programs that use AME - Premiere, After Effects, Flash etc, restart yourt machine then reinstall.
Then try again.

Adobe Media Encoder Unknown Error

I'm trying to export an Adobe Premier Pro file on Adobe Media Encoder. Each time I try, it gets about halfway through, then this error message comes up:
- Source File: /Users/A25/Library/Caches/TemporaryItems/Incubus Trailer Rough Cut.prproj
- Output File: /Users/A25/Desktop/Odyne Theatrical Trailer.mp4
- Preset Used: HDTV 1080p 25 High Quality
- Video: PAL, 1920x1080, 25 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:07:07
Mon Apr 15 12:48:21 2013 : Encoding Failed
Error compiling movie.
Unknown error.
I've tried different video presets (1440x1080, 1920x1080 etc), but this message has appeard every time. Any ideas how to export it?
Thanks

Please read here:
"Error compiling movie" when rendering or exporting with Premiere Pro CS3, CS4, CS5, CS5.5, CS6
and here:
Adobe Forums: FAQ: What information should I provide when asking a question on this forum?
Jeff

Deserialization error: XML reader error: unexpected character content:

Hi,
I'm just learning to write web services. I pasted the service and it seems to work.
It's code is :
package server;
import javax.jws.WebService;
public class HelloImpl {
   * @param name
   * @return Say hello to the person.
   public String sayHello(String name) {
     return "Hello, " + name + "!";
}I wired the service using spring, following the tutorial :
public class HellowsImpl {
    String name;
    public HellowsImpl() {
    private Hellows service;
    public void setService(Hellows service) {
        this.service = service;
    public void sayHi() {
        try {
            service.sayHello(name);
        } catch (RemoteException e) {
            // TODO
    public Hellows getService() {
        return service;
    public void setName(String name) {
        this.name = name;
}But when I try this :     HellowsImpl service ;
    service=(HellowsImpl)ac.getBean("hellowsclient");
service.sayHi();I get the exception : Caught exception while handling request: deserialization error: XML reader error: unexpected character content: "fd"
Where might be the problem?

Hi, I am also facing this error while trying to create "Dynamic Proxy Client"
I am accessing the WS method like this
String UrlString = "http://localhost:1559/DynamicProxy/DProxy?WSDL";
String nameSpace = "urn:DProxy/wsdl";
String serviceName = "DProxy";
String port = "DProxySEIPort";
URL serviceUrl = new URL(UrlString);
ServiceFactory serviceFactory = ServiceFactory.newInstance();
Service service = serviceFactory.createService(serviceUrl,new QName(nameSpace,serviceName));
dproxy.DProxySEI myProxy = (dproxy.DProxySEI)service.getPort(new QName(nameSpace,port),dproxy.DProxySEI.class);
String message = myProxy.sayHello("rajeev");
WSDL File content :
<?xml version="1.0" encoding="UTF-8"?><definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="urn:DProxy/wsdl" xmlns:ns2="urn:DProxy/types" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" name="DProxy" targetNamespace="urn:DProxy/wsdl">
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:DProxy/types" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="urn:DProxy/types">
<complexType name="sayHello">
<sequence>
<element name="String_1" type="string" nillable="true"/></sequence></complexType>
<complexType name="sayHelloResponse">
<sequence>
<element name="result" type="string" nillable="true"/></sequence></complexType>
<element name="sayHello" type="tns:sayHello"/>
<element name="sayHelloResponse" type="tns:sayHelloResponse"/></schema></types>
<message name="DProxySEI_sayHello">
<part name="parameters" element="ns2:sayHello"/></message>
<message name="DProxySEI_sayHelloResponse">
<part name="result" element="ns2:sayHelloResponse"/></message>
<portType name="DProxySEI">
<operation name="sayHello">
<input message="tns:DProxySEI_sayHello"/>
<output message="tns:DProxySEI_sayHelloResponse"/></operation></portType>
<binding name="DProxySEIBinding" type="tns:DProxySEI">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="sayHello">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/></input>
<output>
<soap:body use="literal"/></output></operation></binding>
<service name="DProxy">
<port name="DProxySEIPort" binding="tns:DProxySEIBinding">
<soap:address location="http://localhost:1559/DynamicProxy/DProxy" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"/></port></service></definitions>
and Here is my SEI Implementation class
public java.lang.String sayHello(String name) throws java.rmi.RemoteException {
String message = "hi.."+name+"..How r u";
return message;
Can any one help me plz...
Thanks in advance..

Encoding sequence error

Hi Experts,
We are having a synchronous scenario Websphere to PI. We are getting this error while parsing,
"Encoding sequence error"
Some special characters coming into PI box and they are unable to Parse by PI. This message is failing in Message Mapping with this error. The xml is of "UTF-8" codepage only.
Now we need to get this mapping succesfull with out removing those special characters. Can you please help us in this?
Thanks,
Anudeep.

Hi Raj,
Websphere team is sending it in UTF-8 format only.

Video File Read Error

Dear DVDSP Brains,
I am using DVDSP3 and have created a DVD with several menus. Whenever I try and build it the log gives me the following error message:
Compiling VTS#2 (MM to Film Menu Trans)...
Writing VTS020.VOB
Generating Transition: MM to Film Menu Trans, Clip 1...
Generating Transition: MM to Film Menu Trans, Clip 3...
Muxing VTS021.VOB
Done.
Compiling VTS#3 (MM to TV Movies Trans)...
Writing VTS030.VOB
Generating Transition: MM to TV Movies Trans, Clip 1...
Generating Transition: MM to TV Movies Trans, Clip 3...
Muxing VTS031.VOB
Done.
Compiling VTS#4 (Film Menu to MM Trans)...
Writing VTS040.VOB
Generating Transition: Film Menu to MM Trans, Clip 1...
Generating Transition: Film Menu to MM Trans, Clip 3...
Muxing VTS041.VOB
Video File Read Error
Build cancelled
Formatting finished.
Building was not successful. See log.
The clip it seems to have a problem with "Film Menu to MM Trans, Clip 3..." is - I think - a still that has been added to the end of a transition movie between menus. I added the still to allow a dissolve to occur into the next menu and its buttons. I'm not sure if my diagnosis is correct.
I have seached the forum and attempted to implement some of the advice given that might be relevant.
I have tried to re-encode the Film Menu to MM Trans.
I trashed preferences.
I deleted the PAR files (which oddly has now caused he disc to have 5.7GB where it only had 3.2 GB before !!!)
I am at a loss and trying not to panic.
Your help would be much appreciated!
Detsky

I deleted the PAR directories in both the directory where the DVDSP document exists, and in my user directory (~mr88cet/Movies/Gary's Live DVD2 Build). I also tried deleting that whole directory. None of those deletions helped.
I exported the first video fragment in that track. That also didn't help.
Not surprisingly, doing a "build" only didn't help.
Could you tell me more about how this could clarify a problem with importing one of my clips?

Analog control with encoder reading

Dear all,
I am working in designing an controller for servo motor. I am using an third party servo motor and driver connected to PXI 7350 via UMI-7772.
Before I start in designing this controller, I will need to get excess to control the motor via analog control (sinusoidal excitation signal), where the analog output is connected to motor torque command. I also need to record down the value of analog input and position of the motor for further analysis.
I have manage to make the motor move with analog signal but there are some errors:
1. there is a board ID error keep popping up when I run the VI.
2. I cannot get reading for analog input to motor and position reading from encoder. For encoder reading problem, I have try to get value from Read Encoder Position.flx and also Read Position.flx but I failed to extract data from both block.
3. I wish to record both analog input and position reading in a set time interval. I have lag of knowledge in this setting as I am very new in LabView.
Hope someone can help me solve all the problem I have.
Many Thanks.
SeeChew
Attachments:
Signal generator problem.pdf ‏1278 KB
signal generator 1 (2).vi ‏58 KB

1. If it's an error you shown in pdf file, it's because ADC and DAC use different resource. You cannot wire it across function. You must create separate control for ADC and DAC.
2. For AI, see #1. For encoder, since there's an error from previous function, the function after an error won't work.
3. Couple of file I/O example could be found from Help>>Find Examples>>Fundamentals>>File Input and Output. You probably use elapsed time function to set time interval for data logging.

Got reading error when deploying a web Dynpro project

Hi everyone,
I'm working on NWDS 7.1 CE. After I synchronized a project (using the "Create Project" option), then Build and Deploy it under the Development Infrastructure perspective, I can run it by choosing the "Run" option of the web Dynpro project's application. But once I chose "Deploy new arcihve and run", I got the following error message:
[ERROR CODE DPL.DC.3095] A reading error occurred while loading the SDU 'D:/usr/sap/DW1/J00/j2ee/cluster/server0/temp/tcbldeploy_controller/archives/3888/dow.comgcacmpprofitcenterui.ear'.; nested exception is:
     com.sap.engine.services.dc.util.readers.sdu_reader.SduReaderException: [ERROR CODE DPL.DC.3388]
The specified file D:/usr/sap/DW1/J00/j2ee/cluster/server0/temp/tc~bl~deploy_controller/archives/3888/dow.com~gca~cmp~profitcenter~ui.ear is not a valid SAP deployable unit. In case it is Java Enterprise application, please convert it to SAP compatible deloyable unit first.
Additional information: 'The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
Does anyone know what happens here? What's the difference of the Build/Deploy commands under Web Dynpro perspective and under Development Infrastructure perspective? After I made changes to the project, can I just deploy it under the Development Infrastructure perspective?
Thanks,
James

Hi Nilesh,
       Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
       Deploy now...Other wise see this thread same error solved:
Re: An Deploy Problem about Credentials.
Regards
Suresh

My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"

My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"
should i uninstall/ reinstal.
will i loose all my music nd playlists?

This technique should work...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Socket read error: connection reset by peer

Hi.
Has anybody experienced the error message �Socket read error: connection reset by peer�
Please see below for detailed information.
Appreciate your help
Regards
RT
Enviroment specification
Server: HP/UX 11.00 64-bit, Oracle RDBMS 8.1.6.0.0 64-bit
2 firewalls between client and db.
Client:
Win 2000,
SP3,
Oracle Client 8.1.7.0.0 ,JDBC OCI (thin JDBC driver,class12.zip)
JDK 1.3
JRUN3.0
The TCP protocol is being used in the communication
Error messages
Web Users receive: Socket read error: connection reset by peer
Trace files on the sever: Read unexpected EOF ERROR on 18.
Explanation: The error in the server sqlnet trace file, suggests that a client connection has terminated abnormally, i.e. client machine powered off, a cable removed or a network connection aborted without warning. No user has complained of such a problem and there is no client trace with an error.
The problem
The users of the java web application, experiencing an exception almost once or twice a day.
The JRUN web-server reports broken connections to the db and client are receiving "connection reset by peer".
At the moment when the errors occurs the users just have to wait a while(2-10 min) and then they can use the web application again.(no action is taken)
This problem can not be reproduced. The problem happens only occasionally when the network is under heavy load and new DB connection is being created.
The application
The java web-application uses a customized connection pooling against the database. This pool is shared among all the users of the website. whenever a user process needs to fetch data from the database, a free connection from this pool is allocated. The application is testing if the connection is valid before making a transaction (select '1' from dual). When the error occurs a ORA-3113 end-of-file on communication channel is returned to the application.
The path between the client and db involves at least two firewalls. The firewalls are opened for sql*net traffic. The network group can tell that enquiries from the app.server is not getting feedback from the db. They have not however, identified if the enquiries are reaching the db-srever, or if they are stopped earlier in the network.
Around 1000 users, are using other applications which uses dedicated sqlnet connections against the db and they have not experienced any problems.
Issues considered
Connection pooling
It is a customized connection pooling, developed by Lindorff developers.
I have read through the source code for the connection pooling and it does the job as it should, and in case of bad connection, it tries to create a new connection.
The log file shows that the call to the method DriverManager.getConnection() hangs until the server goes down, which is probably because of the fact that the method DriverManager.setLoginTimeout(), does not take effect and timeout value is Zero. ( According to oracle , Oracle JDBC does not support login timeouts and calling the static DriverManager.setLoginTimeout() method will have no effect).
Firewall
One thing to consider is when the firewall may decide to shut down the socket due to long inactivity of a connection. This will cause problems to JDBC Connection Pool because the pool is not aware of this disconnection at the TCP/IP level; until someone checks out the connection from the pool and tries to use it. The user will get a Socket read error: connection reset by peer.
Jrun timeout paramter is less than the firewall�s timeout so the firewall will not close a connection before Jrun does.
Number of processes the DB can handle
Processes parameter is 1300, , they have not experienced the Oracle error msg �max # of processes reached�.
Port redirection through a firewall:
Since the firewall has a sql net proxy Port redirection through a firewall is not a problem. Problems with port redirection only appear at connect time, but in this situation the connections fail long after the connection is established.
The network group
The network people who investigaged the problem at Lindorff report that there are a significant amount of "dropped packages" between the database server and the jdbc client (web-application) 24 hrs. The reason for this is "unknown established TCP packet" which means that the firewall does not consider these packages to be part of an already established session. The network group believes this happen because one of the hosts send a RESET or FIN signal which the firewall have noticed but are not received by the other host.
It seems like the firewall are dropping packages bacause of "Unknown
established TCP packet" from both the JDBC client and the TNSLISTENER on the database server. The dropped packages are SQL*Net v2 traffic so clearly Oracle products are involved

Presumably something is working.
Thus the problem is not with your code. At least not the database part that you have control over.
That error occurs when the other side closes the socket. Presumably you are catching lost connection exceptions and trying to restore it.

"A Disk Read Error Has Occured" past 239 FSB?

The title says it all. I'm runnin an Neo Platinum 2 and when booting up overclocked past 239 FSB I get "A Disk Read Error Has Occured" and it asks me to reboot. Is this as simple as my SATA being overclocked too far? I was under the impression this board had an SATA lock, but I could be wrong. Any suggestions on getting past this? Or have I reached my peak?

Quote
Originally posted by sarlen
67 mghz? That doesn't make any sense - giving it a try right now though. The ram is tricky though, I hear Ballistix is unrealiable. I'm doing 2.5-2-2-5 at 243, but nothing will make it run 255 for me (next step up to keep my cpu at 2.55). I suppose 243 isn't bad, anyone have any ideas on getting more out of this ram though?
my 3200XL doesn't even reach 210 with ras cas at 2 :/

I get "Reading Error" when using USB connection from Ipod Touch to car radio. Any ideas?

I am trying to connect an IPOD Touch with my car radio via USB port. Using proper cable which works. When I connect the auto radio automatically tries to hook up with the Ipod but then displays "reading error"

The the car-system manyfacturer say it will work with your model iPod and its iOS?
Not all do.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation. --- " cache File Read error"

When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "

Hi,
I also get the following message:
"Could not read ProductKey entry from the cache file"
I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
Do you have a solution for this problem? Did you finish the installation?
Christian

[SOLVED] Pacman "config file could not be read" error during Arch ins

I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump. While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
btw: I'm typing this on a laptop next to my computer
[root@McArch~]# pacman -Syu
error: config file /etc/pacman.d/core could not be read
error: config file /etc/pacman.d/extra could not be read
error: config file /etc/pacman.d/community could not be read
:: Synchronizing package databases . . .
error: failed to updated core (unexpected error)
error: failed to updated extra (unexpected error)
error: failed to updated community (unexpected error)
error: failed to synchronize any databases
Any tips as to whats going on? I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
Last edited by Windfinder (2008-09-29 20:43:29)

Glad you got it working.
I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot. The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist. You must have messed up an initial config file somehow as I couldn't get the same errors you got. It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly. I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare. NB* these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
Server = http://archlinux.unixheads.org/$repo/os/x86_64
Server = ftp://ftp.archlinux.org/$repo/os/x86_64
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
Well it was an interesting way to kill 30+ minutes.

Encoder reading error

Similar Messages

Maybe you are looking for