Encrypt data over the wire with oracle client?

Can the Oracle Client encrypt data over the wire? If I have an Oracle 10g R2 server that is outside of my department's firewall, what is the best way to ensure that none of our data is going across the network in the clear? Thanks.

Why don't you use a VPN?
If that is for some reason or other no good idea, and you still need a solution: We have a tool to redirect TCP connections, which is able to encrypt the connection. Just mail to [email protected]
Best Regards
Artur Södler

Similar Messages

Can you synchronise a Nokia E61 with Oracle Calendar over the wire?

Hi there.
I work in IT and I have just got the Nokia E61 to test out as an alternative to the MDA's that we currently have. Basically we are looking to phase these out as they have proved to be very unreliable but they have been relatively easy to setup via ActiveSync.
Now that I have just received a Nokia E61 to test I was wondering; is there a way I can get Oracle Calendar to synchronise over the wire as opposed to over the air,
just like i could on the MDA's after installing Oracle Calendar Sync for Pocket PC.
The reason why I ask is as a company we would like to do over the wire is so that pc users can synchronise their organisers via usb without costing the company any money via GPRS connections.
Is their a possibility that this could be done or will I have to go down the SyncML route?
In advance many thanks for your help!

This cannot be achieved with the Synthesis SyncML client. The latest Oracle Calendar Application System server patch (10.1.2.3.1) only mentions Nokia N90 and 6682.
So Oracle does not support Nokia E61 yet. I suggest that you raise an enhancement request SR on Metalink.
Best regards,
Fred

Error :"The provider is not compatible with the version of Oracle client"

Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
Anderson

Hi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark

Running in 64 bit mode with the 32 bit Oracle client installed

I have seen many postings on this issue but none of the suggested solutions have helped me.
I am running visual studio 2010 professional with SP1 on windows 7 64 bit machine. When I try to run a web service locally and call it with SoapUI, I get the following error message during OracleConnection.Open().
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
I have tried setting up the build configuration and the project settings to target 32 bit but that has not helped. I have also tried removing the reference to System.Data.OracleClient that shows being under Program Files (x86) and add a new reference to the dll under GAC_64. That too did not work.
I only have the 64 bit client installed on my machine.
Any help will be appreciated.
Thank you

1. Visual Studio any version is 32 bit ONLY irrespective of hardware or OS bits. So to DEVELOP with Oracle Client you MUST install 32 bit Oracle ODAC components. Task manager will show devenv.exe *32 (to confirm 32 bit Visual Studio application).
2. You can run your web application inside IIS/IIS Express in your PC which independently can be either 32bit or 64bit. If it is 64 bit, you MUST also install 64 bit Oracle ODAC components which means you'll have to install both 32bit and 64bit in your 64 bit Win7 running on 64bit hardware.
3. In Visual Studio if you compile with "AnyCPU" as target, the resultant binaries (Web/NonWeb) can be both 32bit or 64bit. So if target PC is "AnyCPU" or "x64", you MUST install Oracle ODAC 64 bit in the target OS if that target OS is 64bit. You don't have to install 32bit ODAC in the target PC.
4. One more catch to above scenario is the target OS could be 64bit simulated OS on a 32bit hardware. In such case you MUST install both 32bit and 64bit ODAC components.
So while you ask your network team to download ODP.NET/ODAC Components make sure you ask them to download both 32bit and 64bit. Total nearly 600MB.
Hope this helps many people out there.

Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

Hello guys,
            Problem has been solved -
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
1. If you install 64 bit oracle this is not an issue. Install 64 bit oracle.
2. Download odp.net 32 bit from below link:-
    ODP.NET Managed Driver Beta Download</title><meta name="Title" content="ODP.NET Managed Driver B…
3. installed the odp.net.
4. open the visual studio 2010.
5.Select new - project - asp.net web application - project name -ok
6.select tools- > connect to database- then follow the following steps
                         i> user name - your user name/client username (example -- hr)
                         ii> password -- enter your password/client password (example- hr)
                        iii>select connection type -- if you want to connect client database then- select EZ connect other wise select tns
                        iv>test the connection- then you will get connection succeed.
                        v> then click ok
Thanks
Chandrashekhar

You do not need to do anything in VS. You do need to configure both tnsnames.ora files, because the drivers do not share any data.
Please see:
http://sqlblog.com/blogs/jorg_klein/archive/2011/06/09/ssis-connect-to-oracle-on-a-64-bit-machine.aspx

This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

hi friends ,
My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
In error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bit

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

The provider is not compatible with the version of Oracle client

We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
C:\oracle\product\12.1.0\x86
C:\oracle\product\12.1.0\x64
The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
The provider is not compatible with the version of Oracle client
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error:
Line 87: mDataSource = dataSource
Line 88: mConnectionString = GetDBConnectionString(dataSource)
Line 89: mConnection = New OracleConnection(mConnectionString)
Line 90: mParams = New List(Of IDbDataParameter)
Line 91: End Sub
I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.

Hi,
Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
thanks and regards
Venkat

'The provider is not compatible with the version of Oracle client' exceptio

Hi
I installed ODAC-11.1.0.7.10 Beta on my development system and developed a .net application which uses Oracle.DataAccess.dll to connect to Oracle10g database.
the application is working fine, means opening connection successfully when I run it from my development system. but the same application is throwing
'The provider is not compatible with the version of Oracle client' exception when I run it on my 10g database server system.
what I need to do to run the application successfully on the machine where 10g server exists?
any help is appreciated.
thanks,
harry

Hi Harry,
I am not sure why you installed 11.1.0.7.10 Beta as 11.1.0.7.20 has been released and you should not be using the beta at this time. That error message is because the dependencies being loaded by the process are the wrong version. When you deploy an ODP .NET application using 11.1.7.x, you need to make sure you deploy it to a machine where the 11.1.0.7.x dependencies are installed. My guess is if I read your poat correctly is that Oracle.DataAccess.dll version 11.1 is loaded but its finding 10.2 dependencies on the target deployment box.
HTH
Jenny

Another: The provider is not compatible with the version of Oracle client

Hi everybody,
We still have problems with the ODP dll. with our .Net development. I copied all the dlls as mentioned here: [http://splinter.com.au/blog/?p=156] and in many other posts here in the forum. The .Net development works fine on our Development PCs (WIN XP32) and on many other PCs in the company. But we still have some PCs (As well WIN XP32) that come up with the Error: The provider is not compatible with the version of Oracle client.
Has anyone an idea???
Thanks a lot for your help
Best Jan

Hi Jan,
If there has never been any Oracle Client software installed on the machines, it seems unlikely that there would be Oracle policy files and version(s) of Oracle.DataAccess in the GAC. But, yes, the CLR will look to the GAC first for loading the Oracle.DataAccess assembly. I'm not sure what Framework or Domain setting would be involved here if there is no Oracle client installed. Are the machines configured the same as far as Regional/Language settings, etc?
One thing you might be able to try is to create an application configuration file and enable ODP.NET trace in the file. This is an ODP.NET 11.1 new feature. However, it's possible the error will prevent the trace file from being created. You would create a file named YourApplicationName.exe.config and here is a sample of the minimum content to enable ODP.NET trace:
{noformat}
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<oracle.dataaccess.client>
   <settings>
     <add name="TraceFileName" value="c:\odpnet2.trc"/>
     <add name="TraceLevel" value="1"/>
   </settings>
</oracle.dataaccess.client>
</configuration>
{noformat}
I wish I had an easy answer for you!
Regards,
Mark

The provider is not compatible with the version of Oracle client... again!

Please, please, please help me!
I get the error, "The provider is not compatible with the version of Oracle client", intermittently on my Test Server. Strangely, without restarting the server or IIS, my application suddenly decides that I don't have the right Oracle client. I don't have any such issue on my local machine even though I'm using the same Oracle 11g client from Beta 1.
I have Oracle 11g (D:\Oracle11g\product\11.1.0) installed. I tried specifying which assembly to use in my web.config:
<compilation debug="true" defaultLanguage="c#">
<assemblies>
<add assembly="Oracle.DataAccess, Version=2.111.5.10, Culture=neutral, PublicKeyToken=89b483f429c47342" />
</assemblies>
</compilation>
I'm not even trying to use a 10g client with the Providers as discussed here: "The provider is not compatible with the version of Oracle client"
What I don't understand is why this error comes and goes?!?! Has anyone experienced anything like this?

The server is Win 2003. The local development machine is WinXP.
...I was trying to wait to install Beta 2 because of the nasty bugs reported on this forum.
I'm now seeing that ORACLE_HOME wasn't set on my server because my co-worker removed the path. Somehow it was able to find an Oracle Home on the server, but apparently, it didn't always find the same home causing this error intermittently.
Now, my question is how can I get my application to use the 11g Client as its Oracle Home, while my co-worker can use 10g Client as his Oracle Home? To be a bit more specific, he needs to use an ODBC client to connect because his application uses Classic ASP.
Is this possible, or are we going to have to set up separate machines?
Bee

'The provider is not compatible with the version of Oracle client error' popping up randomly

I have several asp.net pages running on an application server which generally work without issue. However I've had the Server error "The provider is not compatible with the version of Oracle client error" crop up twice seemingly randomly that affects all of my pages that interact with the DB server. A simple reboot of the application server solves the issue and the pages run again with no problems. What could be causing this problem?

Sorry if I wasn't clear initially. Basically I've got 2 different applications in 2 different IIS folders on the webserver, each with several asp.net pages. They work fine for a period of time and then inexplicably that error gets thrown and affects all of my asp.net pages in both applications. The admin tells me that the other older applications on the same server are unaffected. A simple reboot of the server fixes the issue until the next time it happens (I can't identify any consistent point where this crash happens, the admin originally suggested that there might be something in my code causing a memory issue). I had the same applications hosted on my local machine for a time and this never happened as well as it never happening when I run them in localhost. How can I trace whether or not another part of my application is trying to load ODP.NET by itself? How can I verify the DLL search order for my application?

I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did.

I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did. But some reason the app Clash Of Clans did not. Thank you.

If I wiped my phone I wouldn't have the contacts on my phone to send to my self. I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

Exchange 2010 DAG Replication - too much data crossing the wire

I’m replicating 3 Exchange databases from our production active Exchange 2010 server across the WAN to another passive Exchange 2010 server at our DR site.
The Exchange server at the DR site does not have any active databases, i.e. no users are hitting that server.
We are running Update Rollup 8 for Exchange Server 2010 SP1 on both these servers.
The two sites are connected via a 10Mb/s MPLS connection and all the databases are in sync and the replication is working fine.
I have setup a network sniffer at the primary site and see a sizable amount of data crossing the wire from the production Exchange server to the DR Exchange server.
When I query the production Exchange server using the Tracking Log explorer and only choose the EventID ‘RECEIVED’ that should show me the amount of data that has been committed to the database.
If I choose a date range that is the same exact range that I have used to capture the raw data with my sniffer the amount of data the sniffer shows crossing the wire is 10 fold compared to what the Tracking Log Explorer shows.
If I actually count up the data in the LOG files it is about 20% more than what is crossing the wire but that seems to be because the DAG is compressing the data.
If in a one hour timeframe there is 500MB of data crossing the wire to the DR Exchange server the tracking log explorer will show only 50MB.
I would like to know why the data crossing the wire far exceeds the amount of data that is truly being sent/received from the primary exchange server.
Perhaps I’m simply not getting a true view of the amount of data being committed to the exchange server using the Tracking Log Explorer.
Maybe there is a better way to report how much data is being committed to the exchange databases.
Any assistance would be appreciated…

Two things.
1 - you must update Exchange to SP3 and a recent RU. Willard has already provided the links, which point back to my blog if you want to see the lifecycle map for Exchange 2010. SP1 has been out of support since January 2013. Time to move
on pllease
2 - Looking at the tracking log is not sufficient. I would not expect that to show everything.
I want to know what traffic you see as excessive. What ports are you seeing used here?
My money is on content indexing. CI will use additional traffic over and above log repl traffic. Expect CI traffic to be roughly the same again. You can test this by disabling CI on the database or stopping the services on the DR server.
To disable the CI for the database:
Set-MailboxDatabase DBName -indexEnabled $False
Or stop the Exchange search services on the DR box to leave production unaffected.
Again - you need to update Exchange. You would be better to do that now rather than when something breaks and Microsoft support cannot fully assist you since you are not uptodate.    I'll leave discussion of the security issues resolved
in recent Exchange RUs aside.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exception writing binary data to the output stream to client -Broken pipe

Hi,
I am trying to use the drag & drop feature using Contributor mode of Webcenter sites. Single Image Page Attribute is working properly where as Multiple Image Page Attribute throws the following error:
[ERROR] [.kernel.Default (self-tuning)'] [logging.cs.satellite.request] Exception writing binary data to the output stream to client 10.191.117.106
java.net.SocketException: Broken pipe
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:568)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:539)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:427)
     at weblogic.servlet.internal.ChunkOutput$2.checkForFlush(ChunkOutput.java:648)
     at weblogic.servlet.internal.ChunkOutput.write(ChunkOutput.java:333)
     at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:148)
     at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:148)
     at COM.FutureTense.Servlet.ServletRequest$OutputOutputStream.write(ServletRequest.java:80)
     at COM.FutureTense.Servlet.ServletRequest.write(ServletRequest.java:1633)
     at com.openmarket.Satellite.RequestContext.write(RequestContext.java:1123)
     at com.openmarket.Satellite.BytePiece.stream(DataPiece.java:253)
     at com.openmarket.Satellite.CacheObjectImpl.stream(CacheObjectImpl.java:651)
     at com.openmarket.Satellite.Http11Responder.respondForWrapper(Http11Responder.java:142)
     at com.openmarket.Satellite.WrapperAwareResponder.respond(WrapperAwareResponder.java:36)
     at com.openmarket.Satellite.SatelliteServer.execute(SatelliteServer.java:85)
     at com.openmarket.Satellite.servlet.BaseServlet.doGet(BaseServlet.java:118)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:557)
     at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Thanks
KarthiK

Thank u very much,
     FileOutputStream opGif = new FileOutputStream(destFile, false);
I have changed above line with the following line:
     PrintWriter opGif = new PrintWriter ( new FileWriter(destFile, false));
and now this code is working very fine.
Thanks once again...

Crash in 32 bit C++ application on Linux 5.4 with Oracle Client 11.2.0.2.

Hi ,
I am getting following crash in 32 bit C++ application built on Linux platform 5.4 with Oracle client version 11.2.0.2.
Program terminated with signal 6, Aborted.
[New process 22157]
#0 0xffffe410 in __kernel_vsyscall ()
(gdb) bt
#0 0xffffe410 in __kernel_vsyscall ()
#1 0xf7dc5c81 in raise () from /lib/libpthread.so.0
#2 0xf73d4d43 in skgesigOSCrash () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#3 0xf7643d61 in kpeDbgSignalHandler () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#4 0xf73d5003 in skgesig_sigactionHandler () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#5 <signal handler called>
#6 0xffffe410 in __kernel_vsyscall ()
#7 0x00be7df0 in raise () from /lib/libc.so.6
#8 0x00be9701 in abort () from /lib/libc.so.6
#9 0x0804b716 in main (argc=2, argv=0xffabe244) at crewxa.cc:371From the stack trace, it seems that the crash is occurring at oracle client library libclntsh.so.11.1 . When looked at Metalink, there is a note Pro*c Application Cores On 11g Client [ID 1410089.1], which says that Pro *C application consistently produces core dumps with above stack trace in Oracle client 11.2.0.2 .
Such traces are resulting from the function “sqlnst ()”. But in this case, the stack is called from the main function of our application.
Please advice.

Thanks again, Phil.
It seems to be some specific situation, since I could get to install the same version (Client 11.2.0.1 32 bits) in a Windows Vista 64 bits.
I still hope somebody has an answer.
Best regards!

Encrypt data over the wire with oracle client?

Similar Messages

Maybe you are looking for