Interactive Reporting Reports - Same Rpt Format, but Different Result Set

I have created a report using result set 1. I've saved that, but want to copy it & use the same format/columns to create a new report using a different result set (the result sets have the same data, but one is filtered). Is there an easy way to change the name of the result set being used w/o re-creating the entire report columns & all?
Terri

I am in the Dashboard Studio - Optimize Utility. When I select that report (or any of the others), the Reparent button is grayed out on the toolbar. I've also tried right-clicking on the report and it's grayed out there as well. Any ideas?

Similar Messages

Same exact Code but different results

I am trying to fill a Listbox in a single Dialog based program using names
from a file. I started by using an example program from the MSDN - Modeless.
A simple Dialog based program using a modeless dialog to add strings to a
Listbox in the main dialog. I inserted into the sample program the following
code, which works perfectly:
#include <Fstream>
BOOL CLeasesDlg:nInitDialog()
char* names;
CListBox* pList = (CListBox*) GetDlgItem(IDC_LIST);
infile.open("Leases",ios::in, filebuf:penprot);
while( (infile.getline(names,25,'\n')) != NULL)
pList->AddString(names);
infile.close();
Sunce the sample program was just a stepping stone I created my own Dialog
based program using the AppWizard. I inserted the above code. I now receive
an "unhandled exception" error every time during the "getline" execution. I
have been trying for the last several days to track down the problem but can
not.
Some of what I learned:
First-chance exception in Leases.exe (MSVCIRTD.DLL): 0xC0000005: Access
Violation.
so I wrote code to establish access permissions:
int test = 0;
// Check for existence
if( test = ((_access( "Leases", 0 )) != -1) )
// Check for read permission
if(test = ((_access( "Leases", 4 )) != -1) )
I stepped thru both with no problem. The file exist and is readable but can
not retreive the first name.
In the disassembly window it stops on this line:
strgetl.cpp --------------------------------------------------------------
102A75CD 88 08 mov byte ptr [eax],cl
I do not understand how the code can work in the sample program and not work
in the one I created. I looked back at another program I wrote several years
ago and I used the exact same code with no problem. I would think that my
compiler was corrupted but it compiles the modeless sample program.
I am totally baffled .... PLEASE ... PLEASE help!
I would be greatly appreciative

Hey Randy,
This forum is reserved for Measurement Studio questions. I recommend checking with Microsofts forums because the people there will have more experience doing what you are looking for.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

2 iphones 1 computer. updated my wifes phone to ios 5 her phone got wiped of all apps and all my contacts are on her phone. we had been using the same apple id but different user accounts on our laptop. How do i get her phone back to normal?

2 iphone 4, 1 computer. i upgraded to ios 5 and just updated my wifes phone as well. her phone got wiped of all apps and all my contacts were put on her phone. we had been using the same apple id but different user acct on our laptop. How do i get her phone back to normal??

Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

Interactive report column filters to display differently than column values

Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.

Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt

Error in exporting from Interactive Report to PDF format

Hello,
i am using APEX and from an Interactive Report i am trying to export using Download | PDF format. The table and corresponding report has only text fields. Database character set is UTF-8. Up to now i haven't been able to get a PDF file that can be open from Adobe Acrobat Reader. Every file fails opening with message like "Adobe Reader could not open filename.pdf, because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). This happens for every report i have tried up to now. If i export report in CSV format all are ok.
Is there a known bug with PDF download of APEX?
TIA

See this link: http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
FOP & Cocoon are free (just need to install the software and configure) Bi Publisher I believe works only for Standard Reports and no Interactive reports at this time.. If you have the $$ BI Publisher is worth the investment!!
Also, it is rumored that APEX 4.0 will have the PDF generation built in as apposed to the current model where you need to bolt something on..
Thank you,
Tony Miller
Webster, TX

Apex 5.0, Horizontal scrollbar for Interactive Report and Pivot Format

Hi,
i would like to know how to have an horizontal scrollbar for an interactive report (5.0) after making a pivot from the user interface; i have a lot of columns and without the pivot the horizontal scrollbar appears . After it doesn't appear.
I tried with the Region Header <div style="overflow:auto;"> and Region Footer </div> but without success.
Regards
Gianpaolo

Hi gianpagi,
gianpagi wrote:
i would like to know how to have an horizontal scrollbar for an interactive report (5.0) after making a pivot from the user interface; i have a lot of columns and without the pivot the horizontal scrollbar appears . After it doesn't appear.
I tried with the Region Header <div style="overflow:auto;"> and Region Footer </div> but without success.
Please mention the theme and template you are using for the Interactive Report.
Can you re-produce the issue on apex.oracle.com and share the workspace credentials, so that can have closer look at the issue?
Regards,
Kiran

Same Effects Panel parameters-different results on Tiff & Psd file format?

Just a quick question to all the users and the Adobe Lightroom team & see if anybody has the same problem.
I have one file saved in a Tiff format & the exact duplicate saved in a PSD, however when I sync the Effects Panel settings between the two, I get different results. The difference isn't black & white but clearly visible. The grain in the PSD file is less coarse & pronounced and the post crop vignetting is much more subtle. The color balance is also different. In other words every adjustments seems to be more subtle & less pronounced on a PSD file compare to a Tiff file.
Not the end of the world but clearly something to keep in mind when syncing settings between the two formats and something that shouldn't be there in the first place.
Thanks

Now you are providing more detail.
"... but lesser quality at least in terms of natural movement."
It sounds very much like 11 is exporting 25p/30p which is why you see non smooth motion.
25p/30p is the result of deinterlacing 50i/60i. When you take two FIELDS that are 1/50th or 1/60th apart and create 1 image, these images will be 1/25th or 1/30th second apart.
You can create 1 frame through several methods.
With iM09 deinterlacing occured only if you imported as LARGE, OPTIMIZED video, or used a function or FX that scales video. Perhaps with 11, Apple has decided that its time to FORCE any kind of interlaced video to be deinterlaced.
In other words, LARGE and FULL only relate to size.
One possible advantage is that Apple has finally decided to deinterlace using BLEND during import. This would look better, but it creates 25p or 30p video.
They may hinting its time to buy a progressive camera.

Same Apple ID but different emails

First off, some info about my situation...I have a 4S, iPad 2 and MBP. I am the only one in my household that has iOS5 and can therefore use iCloud. When I was going through signup for iCloud, it asked for an existing Apple ID, so I used my iTunes account one (a Gmail address) and it then created a me.com email. So far, so good.
Like many, I then thought it'd much easier if I could just use the new me.com address for everything Apple related from now on, so I tried to change the email address associated with my Apple ID to the me.com address...but no joy, as I kept getting the you can't use a MobileMe account etc. message (even though I've never had one!). I then noticed that somehow (I guess when I used my existing Apple ID to join iCloud) my me.com address was already listed as an alternate email for my Apple ID.
I can log in to all things Apple related using either email address (although iTunes still shows my Gmail address even if I log in using the me.com address).
Apple support files recommend that most users use the same Apple ID for both iTunes and iCloud. Am I right in thinking that as the 2 email addresses are linked and are the same Apple ID that it won't make any difference what email I use for either (so if I wanted I could use the me.com for iCloud as my "Apple ID" and the Gmail for iTunes, or vice versa or even use one for both)?
Secondly, I'd like to use the new me.com address I created for FaceTime and iMessage...I have signed into FaceTime on OS X using the me.com address and on my 4S, under their respective setting I've also done this (plus I've put the me.com address for "You can be reached for video calls at"). Can people FaceTime etc. only if they know my me.com address or can they also use my Gmail address, seeing as they are the same Apple ID? I also realise that I can also add my Gmail address as an alternate for FaceTime and iMessages but do I need to, as again they are the same Apple ID?
Sorry for the long winded post but thought it best to give as much as info as possible and hope it's written clearly!

You can have the same Apple Id, but you do need to have different email addresses for the "You can be Reached by Facetime At" section under settings.
If that is o.k, then make sure the email address you set for each device is the one being used to initiate the facetime call.
If your facetime call is initiated using the email from the Apple ID its effectively like calling yourself.

How To Create Table View With Same Column name But Different Table?

Hi All,
I have the problem to create a tableview with same column name but in different table.
The Table that i have:-
Table - PAC051MPROFORMA
Column - mrn,visitid
Table - PAC051TPROFORMA
Column - mrn,visitid
Table - PAC052MTRANSBILL
Column - mrn,visitid
Then i want to create a table view to view that table. This is my SQL
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
That SQL Return this error = ORA-00957: duplicate column name
Then I modify that SQL to
CREATE VIEW pacviewproforma (mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
This time this error return = ORA-01730: invalid number of column names specified
What should i do?
Thanks...

Hi,
SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
ERROR at line 1:
ORA-00957: duplicate column namePlease give different names to each column.
Something like this..
SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
_visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
View created.
SQL> DESC pacviewproforma;
Name                                      Null?    Type
MPROFORMA_MRN                                      NUMBER
MPROFORMA_VISITID                                  NUMBER
TPROFORMA_MRN                                      NUMBER
TPROFORMA_VISITID                                  NUMBER
MTRANSBILL_MRN                                     NUMBER
MTRANSBILL_VISITID                                 NUMBER
ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
Twinkle

EWS Managed API: Email sender name incorrect if loading properties of multiple emails and several emails have same email address (but different names)

Hi,
I have an issue using the Exchange Web Services Managed API. I'm essentially implementing an 'inbox', and am essentially using two calls:
folder.FindItems(filter, view) with the view set up with the 'idonly' property.
The returns a 'FindItemResults<>' object containing a set of items.
And then calling service.LoadPropertiesForItems(items, props), where the props contains all 'first class properties', which includes the sender details.
Now, the inbox contains several emails from the same email address but with different displaynames.
E.g. There may be one email from "Bob <[email protected]>" and another email from "Alice <[email protected]>" and another email from "Charlie <[email protected]>" etc.
The issue is that in the information that EWS returns from the call to LoadPropertiesForItems, every email ends up with the same sender name (from the first one in the list)!
i.e. When I enumerate through the returned items, the item.Sender.Name will always be"Bob" for every email where Sender.Address is [email protected]
I have debugged this with a http sniffer just to ensure that it really is the EWS coming back with this information rather than anything in the managed layer.
Is this a known issue? How can I work around this (without querying every single email for the sender name individually, as that would be too slow)?
Thanks

Hi Venkat,
Thanks for the reply.
The scenario is that the client receives emails from a (3rd-party) automated system. The email address from this automated system is always "noreply@<blah.com>", while the display name is used to differentiate the actual sender.
I suspect that this kind of system will likely become more widely used, and so for us will increase in priority (obviously its a priority for our client already)!
Just for the record, if this is a known issue do you have a bug number or equivalent for it? (I tried to search but couldn't locate it).

Same Execution plan But different consistent read values

hi,
my db version 10.2.0.3
os version solaris 10.
i have a query which has same execution plan but with diffrenet consistent read values when optimizer_mode is RULE and CHOOSE.
what may be the cause of that?
thanks,
Here is the query:
SELECT *
FROM XXX
WHERE id = 4567
RULE based:
| Id | Operation | Name |
| 0 | SELECT STATEMENT | |
| 1 | TABLE ACCESS BY INDEX ROWID| XXX|
| 2 | INDEX RANGE SCAN | XXX_INX_ID |
Note
- 'PLAN_TABLE' is old version
- rule based optimizer used (consider using cbo)
Statistics
1 recursive calls
0 db block gets
5 consistent gets
0 physical reads
0 redo size
1973 bytes sent via SQL*Net to client
492 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
COST Based:
| Id | Operation | Name | Rows | Bytes | Co
st (%CPU)|
| 0 | SELECT STATEMENT | | 1 | 107 |
4 (0)|
| 1 | TABLE ACCESS BY INDEX ROWID| APPOINTMENT | 1 | 107 |
4 (0)|
| 2 | INDEX RANGE SCAN | APPO_INX_MASTERAPPOID | 1 | |
3 (0)|
Note
- 'PLAN_TABLE' is old version
Statistics
0 recursive calls
0 db block gets
48120 consistent gets
0 physical reads
0 redo size
1973 bytes sent via SQL*Net to client
492 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed

873792 wrote:
hi,
my db version 10.2.0.3
RULE based:
The Rule Based Optimizer is NOT supported for V10+

Loading the different result sets in the same sequence for the target table

Dear all,
I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
I am looking to load data like this.
If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
how can we achieve this in owb?
any solution for this will be appreciated.
thank you
kumar

My design is like following
SRC1
---->Join1--------------------------->Target1( Table X)<-----Seq1
SRC2
SRC3
----> Join2----------->Target2(Table X)<----Seq1
SRC4
-----> Join3 -------> Target3(Table X)<-----Seq1
SRC5
Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
As per your comments :
you want to load 3 sources to one target with same sequence numbers?
yes
Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
No
can you please tell me how to approach for this?
Thank You
Kumar

Same calculation producing two differing results

Hi All
I have some code in a user exit on save of a delivery (VL02N) that calculates the number of bags/pallets required to furnish that delivery.
I am now adding the same code to a user exit on save a sales order (VA02) to calculate the number of bags/pallets again but when run it is producing differing results.
the code is as follows:
DATA: bag_weight(12) TYPE p DECIMALS 4.
DATA: pallet_weight TYPE marm-umrez.
DATA: bag_denominator TYPE i.
bag_weight = pallet_weight / bag_denominator.
Assuming pallet_weight = 1000 and bag_denominator = 40.
On save of a delivery it is calculating bag_weight as 25.0000 (correct):
On save of a sales order it is calculating bag_weight as 0.0025 (incoorect).
All data declaration, code etc is the same. Does anybody have any clue as to why it would give two differing answers, I would not like to have to add a additional multiplication step to correct the result otherwise.
Thanks in advance
David

Hi,
Whenever you are using the Packed numbers, you need to check or set the program attribute fixed point arithmetic only as only this ensure that the decimal point is calculated correctly.
Have a look at the help.sap.com documentation link:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb2fd9358411d1829f0000e829fbfe/content.htm
Hope this helps.
Thanks,
Samantak.

Same C++ code gives different result in MacOSX and Ubuntu

Hi
I have a C++ program which starts by reading an external file, but changing the name of the file give me different results.
I selected just the important part and made a simple file with the reading part of my program and can be downloaded here
http://dl.dropbox.com/u/664351/files.zip
It just reads the external file and does the output of some values.
It has two external file examples. If one uses "x.txt" everything works fine, but if we use "dados.txt", which is a copy of "x.txt", the last value in the output is wrong.
The stranger is that if i use these same files in ubuntu everything works just fine!
I tried in a MacBook, a MacBook Pro and an iMac (all of them with macosx 10.6) and i always got the error, but not on ubuntu!
Does anyone has a clue about what is happening here?
Cheers,
Marcelo

marcelobarbosa wrote:
Does anyone has a clue about what is happening here?
Change OutFile from a 20 byte character array to a string. GCC isn't able to tell what type that is and is picking int or something, corrupting your memory.

Interactive Reporting Reports - Same Rpt Format, but Different Result Set

Similar Messages

Maybe you are looking for