Encryption is required to connect to this server but the client library does not support encryption
Hi ,guys
I came cross a trouble when I configured connection encryption.
I met the following problem when I have configured connection encryption done.
Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [client: ip]
environment info:
SQL:SQL2008 \SQL2005\SQL2008R2
SERVER:WIN2003 \WIN2008R2
We use C# to develop asp.net webform app, so the provider I use should be SQL client.
client .NET Framework version:NET Framework 3.5
Pls tell me why I met this weird problem.
Thanks in advance.
Love SQL
Sure,here is the connetion string of java app.
jdbc
db.url=jdbc:jtds:sqlserver://60.x.x.x./TaskSiteInfo
db.username=xxx
db.pwd=xxx
Your initial post stated you were using SqlClient in an ASP.NET 3.5 app. I think this is an issue with the jTDS client based on the error message. Are you using the latest jTDS driver? If so, try posting this issue to
http://sourceforge.net/p/jtds/discussion/
Dan Guzman, SQL Server MVP, http://www.dbdelta.com
Similar Messages
-
I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?
Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.
-
The core clock is slow or no core clock connected for this ILA or the ILA core may not meet timing.
[Labtools 27-1395] Unable to arm ILA 'hw_ila_1'. The core clock is slow or no core clock connected for this ILA or the ILA core may not meet timing.
I have seen related forums but cant get any help. My timing is completely fine. I tried all JTAG frequencies from 1.5MHZ to `12 MHZ. My clk for ILA core runs at 100 MHZ.
If i remove one IP , then the ILA core works. THE BD is attached. If i remove the right most IP(HLS_croppin) it works. I really cant understand. There is nothign worng with the timin in either case.There are four possible reasons for this problem:
- The trigger condition is never met;
- The trigger clock (clock mapped to the ILA Core) is stopped;
- A known issue exists with the Storage Qualification feature;
- BUFG is not being used on JTAG CLK (for the ICON).
The trigger condition is never met
Check the message at the bottom of the ChipScope Analyzer window. If it is similar to "Waiting for trigger, Sample buffer has 0 samples(0%)," proceed as follows:
1. Go to "Trigger Setup" and "Trigger Immediate." If ChipScope Analyzer starts the acquisition and shows the samples (the waveform appears), your design is fine; the clock is running, but your trigger condition never occurs.
2. In the "Trigger Setup windows, ensure that you have set the condition correctly if you are sure that this event (the trigger condition) happens in your design.
The trigger clock is stopped
If the message at the bottom of the window is similar to "Waiting for Core to be armed, slow or stopped clock," the trigger condition is not the problem -- the ILA Core does not have a valid clock and is not able to start the acquisition. To fix this, ensure that you have mapped a valid clock (in ChipScope Inserter or ChipScope Generator). If you are not sure if the clock mapped to the ILA Core is running, try to connect your system clock instead (or a clock that you are sure is running).
BUFG is not used on ICON's JTAG clock
If the JTAG clock does not use a BUFG, the "Waiting for upload" message can appear.
In some instances, slowing down the cable speed might provide a suitable work-around.
-
Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit
== This happened ==
Not sure how often
== started few days ago. previously never happened before.I was loading a website, it then stated as below, it wasnt any of the problems stated below.
SERVER NOT FOUND
# Check the address for typing errors such as
ww.example.com instead of
www.example.com
# If you are unable to load any pages, check your computer's network
connection.
# If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
Thus i checked the Page Info, it states that:
Security Info on page:
'''This website does not supply ownership information.
Connection not Encrypted.'''
Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit -
My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
HT3867 I am connected to the hotel wifi network, but the login screen does not appear.
Hi,
I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
Is there a way to make the iPhone try to open the login page?
Ben.I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
But, sometimes it works the first time or suddenly for no reason.
Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated. -
I just purchased creative cloud, but my operating system does not support download. How can this be updated?
Swelte82 what operating system are you using? You will need to meet the minimum system requirements in order to install. You can find the system requirements at System requirements | Creative Cloud.
-
Is there a way to remove my facebook contacts from my phone contacts list? I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out through the settings feature or anything else....HELP please as it is annoying to see all of these contacts!
Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD -
I tried to paste text I copied from another site into my Notepad++ (as I've always done in the past with no problem).
But today for the 1st time, I got a message when I tried to paste the text "Firefox does not support Copy & Paste". What?
What happened to the clipboard?That's a security feature in Firefox.
Use this extension to add the necessary permissions to Firefox - Allow Clipboard Helper: <br />
https://addons.mozilla.org/en-US/firefox/addon/852 -
I just bought an Apple TV and I'm trying to connect airplay but the icon does not appear! My iPhone and Apple TV are on the same wifi connection but the airplay button does not apper? The same thing with my iPad mini
Try restarting all devices including portable iOS ones and your router.
Check Airplay is not disabled in AppleTVs settings.
AC -
The Report Designer does not support this query drill down colum
Iam working On BI7 When iam doing report desingner when iam opening query through data provider
Iam getting thsi error The Report Designer does not support this query drill down colum colum axis may contain one structure only remove additional dimensions
I modify the cube and i remove some dimensions also My problem is when iam putting characterstics in Colums Iam getting this error When iam removing that charcterstics from colums it was not throuing any error
Chaitanyahi,
report designer is for front end view design and the designcan be done with restriction to navigation.
you have dynamic and static report designs with restricted navigations.
chk the links for document
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
Ramesh -
I have a imac mid 2011 model, why can't i connect to airplay? And the airplay icon does not show in the menu.
Hi there cjperido,
You may find the troubleshooting steps in the article below helpful.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts5209
-Griff W. -
I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang -
Input File repository server Error: The requested directory does not exist.
Hi,
Getting following error "The requested directory does not exist." for Input and Out put file repository server.
The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
Thanks,
Manpreet@Siva,
I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
this was working prior to the Windows AD setup tried by me.
Maybe you are looking for
-
IPhone deletes 400 songs from playlist and syncs that to iTunes
Hi there, I'm new on these forums, although I've been using iTunes (on a Windows PC) for many years. I got an iPhone 4s, set it up to use iCloud and iTunes Match. Now I chose to play a playlist (via Bluetooth) of about 500 songs randomly in the iphon
-
Can't get my iPod to work with iTunes
I have an iPod Touch 2 generation, and had to recently restore it, after it had done that I turned it on after it had been reset and it has the picture saying connect to iTunes, when I click to go onto it in iTunes it keeps saying Accessing iTunes st
-
When I receive messages in message+ there is an icon that reads download, which when selected reads downloading then changes back to download without content showing. I checked my downloads on my s5 and it is empty. How do I view my messages, I rec
-
Photoshop CC - EXPORT - RENDER VIDEO issue, screenshots included
Hi there, I´ve created a 25seconds long video in Photoshop CC. When I tried to export it, after I hit Export-Render Video, no dialog box open, it only shows progress bar sayin: Initializing Video Export" and there it stops. My Photoshop and Pc are wo
-
Hi, I am trying to connect my Oracle 8i database with SQLDeveloper (2.1.1.64). When I tries to connect with database it returns me error "Unsupported Oracle database version. What should I do to resolve this error? Thanks in advance