End line of table in XML Publsiher Report in EBS

We report the invoice lines in a table with the row separator (horizontal) lines hidden. When there are more number of lines and this table goes for next page, then bottom line of table border doesn’t appear in the current page. It appears only once in the page where the table ends. We need this in each page. Any help?

Got the modified template from you Kavipriya. It works.
The solution is to add <?table-footer:?> at the end of the table.
Thanks a lot.

Similar Messages

XML Publisher Report in EBS without Standard Oracle Report

Hi folks ,
i have some questions.
Can I create a XML Publisher Report for the EBS without a Standard Oracle Report in EBS.
So that I can build up the files with the Desktop Publisher, create Data Definition / Template with Upload / Create the executable und concurrent and than only start the new program in EBS ?
I have the situation that I can start my program with the template in the background but ít is searching for the report on the file system.
Thanks in advance for the feedback.
regards
Kay

Hi Ravi ,
can i do it only with the xml Publisher , because when i tried it in the past and get all the staff like Template / DD / CP up and running and started the CR i get an error from the system that he is missing a report directly in the file system... so he searched for the report himself on system like a standard 6i Report. But the template and the dd is stored in the db. So my question again, can I use the XML Puplisher without a Standard Report or can i use a dummy file only for checking and after that he use my template / dd.
regards
Kay

Calling a xml publisher report from Ebs - question

Hi,
I know how to call a xml report from ebs using concurrent manager. But i want to open it from a form in application.
My situation is this:
There is a form in the payables modelue, where i search for all the invoices.
There is also a button action in this form wich take the id of the row in wich it is my position and open a rtf raport with this id.
What i need to do is to call my xml report in this button . To pass my raport the id of the row in wich i am and open my report with paramateres.
Can this be done? Has anyone tried this before?
Thanks in advance,
Best regards

Hi,
You can use FND_REQUEST.SUBMIT_REQUEST for submitting the report. The syntax is as follows:
function FND_REQUEST.SUBMIT_REQUEST
(application IN varchar2 default NULL,
program IN varchar2 default NULL,
description IN varchar2 default NULL,
start_time IN varchar2 default NULL,
sub_request IN boolean default FALSE
argument1,
argument2, ..., argument99,
argument100) return number;
Here is the code that I used for submitting XML Report Publisher from within my Oracle Report's AfterReport trigger. The parameters are explained.
a:=FND_REQUEST.SUBMIT_REQUEST('XDO', 'XDOREPPB','Varun XML Report Printing', NULL, FALSE, :P_CONC_REQUEST_ID , 'MYONT','MY_PREPACK_XML','en-US' ,'N', 'RTF', :p_output_format,NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,NULL );
srw.message(123,'Value of New Request : ' || a ||' Output Format :'||:p_output_format);
Hope it helps.
Thanks
Varun

Custom XML Publisher Reports in EBS 11.5.10.2 Fails Randomly

Hi Experts,
I have a Custom XML PUblisher Report Concurrent Program in EBS 11.5.10.2.
The Report fails randomly with a Warning. I get the following error,
[11/21/08 12:17:21 PM] [UNEXPECTED] [915997:RT3085490] java.io.FileNotFoundException: /u01/PROD/prodcomn/admin/out/PROD_irl-dub-finmdt-01/o3085490.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
As you can the OPP fails to find the o3085490.out file in the $APPLCSF/$APPLOUT directory and actually the file is not there in the unix box on that location.
If the same report is submitted again it Works fine, But not at all times.. some of them fails with the above error message.
Any pointers to solve this one.
Regards

Hi,
We are on Multi-node set up with two middle-tiers with a load balancing option Yes.
The XML Publisher Version is 5.6.0. Is it required to move to 5.6.3 ?
Please find a detailed explaination of the issue.
Issue
XML Publisher Reports Fails Randomly in Production
Detailed Explaination
XML Publisher Reports submitted in Production completes with Warning. You can say 1 out of 4 requests submitted in a sequence will fail.
The Log message of the COncurent Program is something like this,
------------- 1) PUBLISH -------------
Beginning post-processing of request 3091786 on node IRL-DUB-FINMDT-01 at 23-NOV-2008 15:36:58.
Post-processing of request 3091786 failed at 23-NOV-2008 15:36:58 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Checking the Output Post Processor Log gives the following message
[11/23/08 6:25:01 PM] [UNEXPECTED] [925353:RT3092523] java.io.FileNotFoundException: /u01/PROD/prodcomn/admin/out/PROD_irl-dub-finmdt-01/o3092523.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Its evident from the message the output file for the request is not generated.
Some Findings to pass on to Version 1
1. Report in not picked up for execution in this case as even the first statement is not executed and there is no oracle session and os process asscociated with it.
I enabled trace and the trace was generated only for the successful ones and it was never generated for the ones completed with warning.
2. The below query gives no values for the failed concurrent request, where as all successful ones have valid values.
SELECT oracle_process_id,oracle_session_id,os_process_id
FROM fnd_concurrent_requests
WHERE request_id = 3091786
Regards

XML Publisher report in EBS - Parameter Form Problem

Hi,
XML Publisher is a very powerful tool for report developing.
In EBS, we have some efficient issue for showing the parameter form when submit a concurrent program.
If the report is D2K Report or PL/SQL script, when submit a request, it almost shows the parameter form immediately after entering the name of the concurrent program.
But if the report output is XML and generate report using XML Publisher, it takes about 1 minutes to show the parameter form.
Is there any setting should be tuning in our environment or some patches should be applied??
Thanks in advance.
Best regards,
Zhxiang.

Hi All,
Is there any suggestion, for the issue that t takes long time to show the parameter form?
Thanks in advance,
Zhxiang

Excel Output problem with XML Publisher Report

Hi Experts,
I am working on XML Publisher report with EBS 11i and database 9i. My XML Report output type is EXCEL, i have below issue with the output.
I have column 'quantity' with xml tag <?QUANTITY?>.
In the XML file it's showing the value '028' for quantity, but when i open the output in EXCEL, it's showing up '28', removing leading zero. I want to show the data in EXCEL also '028'. Could somebody help me how to print the XML Tag value as it is in EXCEL output.
Thanks in advance.

Hi, try using this in your template.
<fo:bidi-override direction="ltr" unicode-bidi="bidi-override"><?QUANTITY?></fo:bidi-override>

Send an email to a mail box when generate a xml publisher report in R12

Dears,
I faced a tough problem about xml publisher, there is a user's requirement, they want to send an email to a common mail box after user run the xml publisher report in EBS R12 instance, and they can check the report in mail box, I have not met any reuqirement like this before, so anybody has the experience about this? and please kindly share it with me, thanks a lot.
It seems I need upload the rtf file or xml file to a directory and then system will send the mail automaticlly, but I do not know the detail information.
Best Regards
Spark

Hi Spark;
Please check below thread which could be helpful for your issue:
Concurrent Request Output via email
Re: concurrent ouput to email
Regard
Helios

Can we use xml Publisher reporting for sql* Plus in EBS

Hello All,
The current report is designed in Sql* Plus Executable report and the output is in txt format, Now the requirement is to have the output in Excel format.
So is it possible to use the xml reporting and make the output as Excel from the word template we design from MSword as we do for rdf(I have done few reports created in rdf to xml publisher reports in EBS and stand alone as well.).
Do the same procedure will suit for Sql*Plus reports tooo or Is there any work around to achieve this.
Thanks and Regards
Balaji.

Hi
Thanks for the reply..
I tried to do the follwoing
1. changed the output to xml in the conc. prog.
2. ran the same report but i am getting the follwoing error in the output file
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource
Other reports which are using the Oracle Reports(rdf) as source, i am able to generated the xml as expected....
So my question is whether we can use sql* reports executable and generate xml in the conc.prog.
if any one has used the sql*reports for xml publisher reporting... please let me know, so that if its possible i will check my sql needs some validation or tuning...
thanks in advance
Balaji.

Line crossing at the corner of the boxes in XML Publisher Report (PDF)

Hi,
We are facing some issue in XML Publisher report using RTF template and PDF output. In PDF output it looks like 2 lines are crossing each other at the corner of the boxes (which are made of the Table in RTF). Did you guys face this issue earlier? Is there any resolution?
thanks,
Ranen

Hi,
I would propose reviewing the eText documentation. I noticed that for RTF templates it's difficult explicitly set the length though within an eText template, you can specify the intended length.
The Oracle post is, in my opinion, convoluted, though it's a point in the right direction
Oracle Business Intelligence Publisher Report Designer's Guide
Regards,
Daniel

Blank line in xml publisher report -

Hi Friends,
There is one issue in xml publisher report. Its an rdf based xml report
In header section it used to display customer address details. like below
address1
address2
address3
city state province postal_code
country
If address2 is NULL, it prints a blank line in between the total address. Need to avoid blank line and print address3 in address2 position.
How can i remove the blank line? Finally there shouldn't be any blank spaces or lines.
Any idea? Plz post here.
Thanks & Regards,
Arun Peddi

Use a conditional region around the Address2. Your if statements could look something like this.
<?if:FIELDNAME!=''?><?FIELDNAME?><?end if?>Have the if statement start at the end of ADDRESS1 and endif at the begining of ADDRESS3.
Richard

XML Publisher Report Bursting Program ends in error

We have a report that generates the XML output (ACH notification)
In the after report we have a call to the Bursting program.
The ACH notification completes with the correct output but the bursting ends in error showing
Set Bursting parameters..
Temp. Directory:/tmp
[101211_072452383][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[101211_072452385][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=28081235, user-variable:cp:language=en, user-variable:cp:responsibility=50274, user-variable.OA_MEDIA=http://xxx/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=28081235, user-variable:cp:locale=en-US, user-variable:cp:user=xxx, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=28081236, user-variable:cp:org_id=83, user-variable:cp:reportdescription=xxx ACH Payment Nofitication}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
/tmp/101211_072452427/xdo1_2.pdf (No such file or directory)
java.io.FileNotFoundException: /tmp/101211_072452427/xdo1_2.pdf (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:523)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
The temp directory variable in the XML Publisher is /tmp which has all the permissions.
The control file calls the delivery method (email 123 in the example) and uses the following template
<xapi:document key="" output-type="pdf" delivery="123">
<xapi:template type="rtf"
location="XDO://XBOL.ACHPAYNOTIF.en.US/?getSource=true" filter=""/>
</xapi:document>
This template is defined for English language and Territory United States.
I covered everything I could find here and in metalink and still cannot make it work.
Any ideas?

Hi;
Similar issue mention at below notes, Please review:
NPE Error While Bursting Using XDOBURSTREP in EBS R12 [ID 754790.1]
Bursting Engine Ends With Java.Lang.Nullpointerexception[Article ID 559443.1]
XDOBURSTREP - XML Publisher Report Bursting Program Fails with InvalidPropertyValueException[Article ID 603424.1]
If its not help I suggest rise SR
Regard
Helios

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

Xml matrix report not expending horizontally

hi guys m trying to develop xml matrix report but m totally stuck.value are not expanding vertically.
RTF tags are here.Plz tell me how can i attach rtf and xml file with this post so you people can help me in better way.
plz help me its very urgent
<?for-each:G_1?>
<?ITEM_CATEGORY?>
Organization : <?horizontal-break-table:1?>
<?for-each-group@cell: G_ITEM_CATEGORY; ORGANIZATION_CODE?>
<? ORGANIZATION_CODE?>
<?end for-each-group?>
<?for-each-group: G_ITEM_CATEGORY;ITEM_CODE?> <?ITEM_CODE?>
<?for-each-group@cell:current-group();ORGANIZATION_CODE ?>
<?current-group()// AMOUNT?>
<?end for-each-group?>
<?end for-each-group?>
<?end for-each-group?>

When you say "the values are not expanding vertically" do you mean that on the printed report it is not returning all the values for a given field, i.e. the field is too small to display the entire value.... OR the repeating frame for the group is not expanding enough to display all the fields???

Extra Blank page in XML Publisher report

Hi,
I am getting extra blank page in XML publisher report.
The RTF has two pages and each page has one table.These two tables will be populated with data based on some if condtion.
eg:
In RTF:
for each Header
if PMA='Y' THEN
Table1 data in 1st page
end if;
pageBreak
IF OTC='Y' then
Table2 data in 2nd page
END IF;
end for each
And also another issue is: The data is starting from the same page instead of new page.
Please help me in solving the issue.
Thanks,
Srinivas

Hi,
Thanks for reply.
I am using <xsl:attribute name="break-before">page</xsl:attribute> page break.
I tried split-by-page-break also,but still its not resolved.
Today I have noticed one thing: When generating this report locally,then there is no blank page coming.But when generating from APPS then blank page is coming.
Please help me to resolve this issue.
Thanks,
Srinivas

How to Populate Internal table data to Table Control in a Report Program

Dear All,
       How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph Reddy

If you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
       no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
      matnr type mara-matnr,
      maktx type makt-maktx,
      end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
            into corresponding fields of table imara
              from mara
               inner join makt
                 on mara~matnr = makt~matnr
                    where mara~matnr in s_matnr
                      and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat = fieldcat
       tables
            t_outtab    = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos    = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos    = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman

End line of table in XML Publsiher Report in EBS

Similar Messages

Maybe you are looking for