End of FCPX trial question

Er, just wanted to ask, I'm sure you'll get a prompt at the end of the 30 days asking you to update but will you be able to continue a half-started project?
Sorry if it's a silly question.

It's not a silly question.
As Tom said, your events and projects are totally separate to the application.
They will be there after the trial version stops working. If you decide to purchase FCP X - just buy it, download it, and carry on working with your old events and projects as before.
You cannnot download the trial a second time.
Andy

Similar Messages

FCS and FCPX trial

Ok this is not one of those can i have both on the machine questions......at least not the traditional question.
I have successfully installed FCPX on a machine that has FCS 3 on it a mac pro
My question is, if i want to put the FCPX trial on my MBP do I have to do the same thing or will it just be installed in a separate location and I can continue to use both with no issues until the trial runs out?
I may be asking too much but figured I would ask before installing and end up wigging out my machine.
Also it is a 2.2ghz 8gb ram running 10.8.3 so ya know

1. No. Apple says that ideally it should be on a separate drive or partition, but they also give details for installing it on the same.
I and many others have done this with no problems.
2. No problems leaving everything where it is.
3. FCP X has some of the capabilities of those apps, but as they will do no harm and only take up 4GB (just the apps), you may as well keep them . . . . unless you know you will never need them again.
The moment you delete them you will suddenly discover a job that requires one of them!

I have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number

i have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number. also, when i click buy, i get an error message saying, "application not found."

There are two different LR’s, one with a serial-number licensing and one with a CC-signin license.
You should uninstall the serial-number LR you have installed, then
Quit the CC Desktop application,
Restart the CC Desktop application—this will rescan what you have installed and not see LR,
LR will now be on the CC Desktiop apps list, so install that.

Failed to download FCPX Trial Version.

I was trying to download FCPX Trial Version from Apple Downloads and failed.
After pressing: "Download" - a message appeared: "Failed" + warning: "
"The following disk images couldn't be opened
Image: FinalCut Trial 7/0/3
reason: not recognized".
My internet connections are ok - I downloaded other things + apps and there were no problems.
My system requirements are ok.
My Imac 24":
OS10.6.8
Memory: 4GB:
Intel Core 2 Duo
4GB of RAM
Graphic card: NVidia Geforce 8800GS .
What's wrong?

Have you tried this link?
http://appldnld.apple.com/Final_Cut_Pro_X/041-4030.20120410.FWDLp/FinalCutTrial1 0.0.4.dmg

CC trial question

I currently am running the trial version of all CC programs, to get a feel for them. Customer service offered me a pretty good deal at the end of my trials on 1/16/15, so i didn't want to pay until then, to get full use of Premiere. Problem is, I used After Effects in the past and the trial has expired. I fully intend on taking the offer and buying my subscription in January, after my Premiere trial, but wanted to use After Effects again to fully try it out too, as I didn't do much with it when I started my trial a few months back. Is there any way of resetting my trial since I plan on buying in the not so distant future? Thanks.

I don't think so, but This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Fcpx trial can't read my card EX3

I download the fcpx trial, i try to read a EX3 card and doesn't work... and to try to resolve this problem when I look to download content format I didn't can find them????
Do you have any sugestion to resolve it... thank you very much

If you're talking about the native BPAV files, you need Sony software (like XDCAM Browser) to convert to XDCAM .mov before importing to FCP X.
Andy

CAN'T EXPORT FCPX TRIAL VERSION

I am really sorry to make a new post on this subject, but I can't get my FCPX TRIAL to export my file in any format. I have been working on this video for a while so I am getting a little bit despered. My share button all the options are grey. These options only work when I select the videos that are not edited. When I go to add destinations nothing happens, there are no next buttons.

your options are to use another computer for the trial, reformat your current computer's hd or forego the trial.

Switching from the FCPX Trial Version to the full version.

I started a project in the FCPX trial version. The trial version ran out before I was finished. I have downloaded the full version, but apparently I was supposed to do it by starting the trail version. Now when I try to open that project the trail version tries to open and doesn't know I have purchased a full version already already. What should I do? Is there a way of opening the full version and moving my project over?

namedug wrote:
I have downloaded the full version, but apparently I was supposed to do it by starting the trail version.
I don't know what that means. If you have down;loaded and installed the paid version, double-click to launch FCP. If the trial version ic opening when you launch the paid cerise, that is very weird, If so, I'd say move the trial to the trash.
Russ

Will i be charged for the full versions of the software at the end of the trials?

I have just started my free trial of DreamWeaver and PhotoShop but do not want to be charged for the full versions at the end of the trial. Do i have to do something to prevent this from happening?

No, they will just stop working.

Netflix trial question

Not sure whether or not to post this in the Apple TV section or here so I'll try here first.
I see to start the Netflix free trial you need to sign into your Apple iTunes account which is fine. My question is what happens at the end of the free trial period. Are you asked to continue the service or does it just start charging the service to your account? If I decide to NOT want Netflix at the end of the free trial period, or at anytime later for that matter, how does one goe about cancelling the subscription? From the Netfix section on the Apple TV I hope. Thanks in advance.

One thing I did myself was buy the Insignia Blu ray player with built in wi-fi and netflix streaming for each of the tv's in my home. That would be one solution, and the Insignia players have worked great for me.
http://www.bestbuy.com/site/Insignia%26%23174%3B+-+Blu-ray+Disc+Player+with+Wi-Fi+and+1080p+Output/9...
If you like posts that I make, be sure to click on the star underneath my name. Thanks!

Advice on Media Files Trim before importing to FCPX (Workflow Question)

Hi,
I often edit actioncam material, like GoPro, Contour etc..
They are usually turned on and then left on for 30-60m. Often multiple cameras and different angles. Perhaps some DSLR footage too. So I end up with several large files, usually H.264 as source material.
If I import them to FCPX straight away, I get massive ProRes Files and project sizes of several terrabytes. <- I want to avoid this for obvious reasons
So I need a solution of how to take the files, cut them into pieces, trim some, rotate some and chop them into smaller files. Once this is done, I can import them to FCPX events and get more nimble and workable files.
The workflow I'd like is:
Film -> Download Files -> Cut/Trim -> Import FCPX -> Edit .....
Anyone have a recommendation of tool or workflow to do this smoothly?

I had the same problem until recently. Now it's dead easy and very quick.
All you need is a hard drive or partition on a drive which you can dedicate to this purpose. Even your camera's card will suffice - what you need to do is rename the drive (or card, when it's mounted on your desktop) to VIDEO - or some name that FCP X will recognise as a camera (DCIM etc may work).
Move your newly shot files to the root of the drive (they must not be in folders).
Launch FCP X - and press Cmd+I (the letter i). The Camera Import window opens and your VIDEO drive should be listed. Select it and your clips will appear.
You can log in and out points where you want and import only the useful material. It will not be recompressed, just trimmed and copied over.
Works brilliantly.
(If you re-named the camera card, you may need to change the name back so that the camera will read it).
Andy

Acrobat 9 Pro trial questions

My organisation is thinking about upgrading from Acrobat 9 Standard to Pro, primarily to use LiveCycle to design and distribute some electronic forms. Prior to to buying the upgrade we'd like to test the both the functionality and uptake with our customers, but before I install the trial version I have a few questions:
Can I just install the trial onto a machine running Acrobat 9 standard? If so, what happens when the trail period expires? Can I just downgrade back to the standard version or is a complete reinstall required?
Will I be able to collect responses from forms designed using LiveCyle with just Acrobat 9 standard, or is the collection dependent on the Pro version?
Any help would be greatly appreciated.
Cheers,
Joe

Okay, so I'll have to uninstall the standard version and install pro and once the trail period is up uninstall pro and reinstall standard.
What about collecting responses to forms created in pro using just standard? Is that possible?

How can I add a response to the end of each item question in an email list of questions and send that back to the originator?

I have emails that ask for certian items to be addressed such as "please fix leak in bath sink" and then the next line will have another request and on and on. I would like to answer each question at the end of each line with a response (preferably in a different color font to stand out) such as "yes - will fix" or "that can't be done" or "you will have to fix that yourself". Then I want to send that reply back to the original sender.

''sfhowes [[#answer-697423|said]]''
<blockquote>
I suggest you consider this add-on: [https://addons.mozilla.org/en-US/thunderbird/addon/clippings/ Clippings] ([http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html How to install]).
</blockquote>
I did look int this but I need to have each answer different in a lot of cases but i thank you and did get an answer that does help greatly - Thanks

Impossible to use 30 days more FCPX trial version after re downloading it

How to do to use the possibility of : "If you’re using a previous version of the Final Cut Pro X trial, you’ll be able to use this version free for an additional 30 days." ?

if you had used e.g. version 0.0 of FCPX as a trial, you're allowed to use the actual trial another 30d.
What version did you try out first?

CO Production Order month end closing and settlement question

We are a utility without PP module. We use CO Production Order to accumulate costs of assembling components (parts and labor) into a material number that we receipt into inventory. We have questions about month end closing process and the settlement of these CO Production Orders when receipts are not complete or labor is not completely entered at month end.
Basically we need to know how other non-manufacturing companies handle the settlement process.

Hi,
The Month end Activities are as follows
Clearing the open items of vendor, customer
Clearing the suspense account regularly
All the Expenses Including the prepaid expenses have to be booked..
Intercompany Balances Should be Zero
Depreciation Run.
Recuring Entries.
Park documents to be posted(FBVO)
Accural and referal in any differneces.
GR/IR Clearing Transaction (Tcode-F.13)
Bank Reconciliation(Comparing the Company Books and Bank Statements)
Exchange rate to be updated
Revaluation of foreign currencyopen items(F.05)
Order Settlements.
Distribution Cycle
Assesment Cycle(KSU5)
Transfer the Inventory to Profit center(1KEH)
Match GL and PCA(KE5T)
MM period Close and Open (Tcode MMVP)
FI Period Open(Tcode OB52).
CO period Closing
Year End Process
All the Month end Activities should be Carried Out.
Balance Carried Forwarded to next year(F.16)
PCA Balance Carried Forward(2KES).
Carry forward the Vendor,Customer and Asset Balances
(Unless Dep is posted for all the months the assets can not be Closed)
Copy the No Ranges to new year
Open the Next year period(OB52)
I Hope this is Helpful,
Assign the Points.
Regards,
Padma

End of FCPX trial question

Similar Messages

Maybe you are looking for