End User Requirement

Hi,
I tried to find out this requirement of my end user, can you suggest me.
Requirement-
Through project system in single or multiple report or transaction
1) Total value of the PO including duties & taxes
2) Total qty recd & balance to deliver
3) Vendor name (though the field is there, the name is not displayed)
Rgds,
Nitish

Dear Sir
Thanks a lot for your immediate reply.
I need your help to config all this fields as they are already their in T_CODE: ME2J and ME5J.
Rgds,
Nitish

Similar Messages

Defining end user requirements

Hi I'm new to discoverer and I would like to know how do you go about defining end user requirements. Is there some sort of rules or documentation around to help with this analysis stage, because I'm told that you need this sort ofinformation to enable you to build the EUL and the business area.
Thank you in advance.
Maria

maria,
well you would first want to identify needed reports capability of your user base. Then locate the current report base to see if some of the requests are already handled. The GAP could then be identified as a GAP in reporting Requirements. As you go through the reports requests you can identify needed data and fields. Then group that data into related items, or related functional needs.
Christopher

SAP Freshers/End users required urgently

Hiii SDN Members,
We are manpower recruiting agency based in Cochin & Bangalore. We have been retained by our CMM Level 4 client based out of Techno park Trivandrum to recruit domain experts/ end users for their immediate requirements.
Qualification: B.tech, MBA
Domain: 3-4 Years in Sales & Marketing.(sales rep's not suitable)
Selection Procedure: Shortlistd candidates have to appear for domain knowledge test, group discussion & Personal interview. Selected candidates need to sign a bond for 24 months with the company. Training would be provided in Trivandrum for 6 weeks on Industry specific modules like IS-retail. IS-Oil & IS-EC&O. After training candidates will be placed either in Trivandrm/ Bangalore/ Mumbai according to the requirement. Interested candidates rush your resumes to [email protected]
Regards
Rajesh

Hi,
I think this is not the forum to discuss the job openings.
Amrish Purohit

Set factory calender and user requirement date calculation

Hi Gurus,
I've requirement to do calculation for start user requirement & end user requirement. The calculation must exclude public holiday and weekend. Therefore factory calender need to be maintained.
Please guide me into doing this.
regards,

Dear
Based on your business requirement , you should have the following set up :
1.One Factory Calender with Work Days Monday-to-Friday Let say FC1 .This will be used on all the organisational level starting from Materials Planning to Sales .But will not be assinge to Capacity Requirement Planning Purpose or Any Production Activity in Work Centre .
2.You should have one more Factory Calander with work Days Monday to Monday ( 7 days week ) with some special rule like Plan Shutdown Days , Breakdown Maintainnece etc and this should be assinged to all the work centres -CR02-Capacity Tab -Capacity Header -Factory Calader ID -Let say it is FC2.
You need to ceate Calander in OP03/SCAL .It does nto have any transport and it will be a Cleinet level changes which requires proper approval .Please rememeber , you need to assing only FC1 to Plant assingement in OP03 where as FC2 will be asisnged only in Work Centre level .
Steps : Goto -OP03
1.Identify all those Public Holidays frist with Fixed or moveable as per business requirement
2.Goto Holiday Calander -Hit the pencil -Hit Create option -Enter ID , Description , Valid To/From Year ( shd be 20 yrs differnce )
Add all those holidays as per Public holidays as applicable in your business with proper valididty and finally SAVE
3.Goto Factory Calander -Hit the pencil -Hit Create option -Enter ID , Description , Valid To/From Year ( shd be 20 yrs differnce )
Asisng Hioliday Calander . In case of FC2-Work centre Calander , here you can hit the Special Rules .Include Special Activity like Plan Shut down of factory with Validity etc and SAVE .
4.Come back to OP03 main screen -Assing the factory Calender in plant .
5.Goto -CR02-Capacity -Capacity Header -Available Capacity Header -Factory Calander-Assing FC2
I do not think you should have planning calander seperately if you do not have any specific reason .
Hope it helps
Regards
JH

Auth objects required for creating super,power,end user roles

Hi ,
I need to create 3 roles according to the below requirement. can you tell me what auth objects req inorder to fulfill customer requirement.
1.     Super User:
     Have the access to Create/Modify/Delete own queries
     Can create Variables, CKF, Structures, Formulas & RKF at the cube level (global)
2.     Power User :
     Have the access to Create/Modify/Delete own queries
     Can create Structures, Formulas at the query level
3.     End User
     Have the access to run and navigate reports at the local level
Hope I will get reply soon
Thanks

Karunakar -
Few things you have to keep in mind when you are giving access to the reports and queries.
S_RS_COMP only will not do.
have you assigned S_RS_COMP1 and S_RS_MPRO for info areas and multi/info providers.
and one more auth object S_RS_ICUBE for info cubes. you have to assign what ever the info cubes that you need to give access to the users.
Then only user will get full access.
precisely in order you can say,
S_RS_COMP
S_RS_COMP1
S_RS_ICUBE
and S_RS_MPRO.
These are main auth objects which are related to info cube, info area access and BEx access.
Hope this would give you clear pic.

System requirement for Adobe Interactive forms as end user

Hi All,
Can any one guide me the minimum system requirement at client PC so that they can use
Adobe interactive forms. i.e. what should be the lowest Adobe reader version and any other
software needed to use interactive form as end user?
I am developer So I am having latest Adobe version & SAP software's.
So forms are working fine on my PC.
Thx

Hi Rohan,
SAP Interactive forms requires Adobe Reader 7.0.9 or above for it to display/work correctly which is also clearly mentioned in SAP Note 834573 (for your reference).
Also, in case you are using the displayType property of the Interactive form as Activex then you may need to install ACF (Active Component Framework ) also on the client's machine in order to preview the form correctly. You should use the property as native which is available in latest versions.
Also, Please make sure that the settings in adobe reader as: Open Adobe Reader->Edit->Preferences->Internet->Display PDF in Broeser option is checked, in case you are diplaying your form in browser.
It seems, if you check the above things your PDF should work properly on client's environment as well.
Hope it helps
Regards,
Gaurav Bhardwaj

Need end user application system requirements

I am writing a proposal for developing an end user DLL or standalone application, using LabVIEW 7 and IMAQ vision. I need to paste in an electronic copy of a description, preferably from NI itself, of what system the user will need, including RAM and disk space requirements, operating system, etc. The software would be developed and tested only on a Windows 2000 machine. This electronic document would be something like the release notes from the LabVIEW Application Builder. Got a URL or something to send by email?

The Release Notes say:
"When you deploy an application you build, the LabVIEW Run-Time Engine requires a minimum of 64 MB of RAM and a screen resolution of 800 × 600 pixels for applications that require a screen, but National Instruments recommends 256 MB of RAM and a screen resolution of 1,024 × 768 pixels."
And on Windows, "The LabVIEW Run-Time Engine requires at least 25 MB of disk space, but National Instruments recommends 155 MB of disk space if you install the default drivers from the National Instruments Device Drivers CD."
If we need to add more details on this issue, can you please email your feedback to [email protected] so we can address it in a future version of LabVIEW?
Thanks!
Kelly Holmes
LabVIEW Documentation
Kelly H
LabVIEW Documentation
National Instruments

DPM 2012 still requires put end users into local admin groups for the purpose of end user data recovery?

On client computers that are protected by DPM 2010 and prior versions, you had to put the end users account in the local administrators group. If you did not add the end user account to the local administrators group you would get this error after opening
the recovery tab in the DPM client: “DPM found no recovery points which you are authorized to restore on the specified DPM server. You can restore only those recovery points for which you were an administrator at the time the
backup was taken. To restore other recovery points, contact your DPM administrator, or attempt to restore from another DPM.” This is not ideal on many networks because the end users are not allowed to have local administrator access.
Ths fix to this was included in hotfix 2465832 found here: http://support.microsoft.com/kb/2465832.
This hotfix (a hotfix rollup package for DPM 2010) resolves other issues with DPM 2010 as well. You can find the full list of what this hotfix corrects on that link.
One would think this issue should have been resolved in DPM 2012, however I am encountering the same exact issue, had to include end-users into the workstation local admin group before they can search for recovery points on the DPM server. This is not acceptable
practice.
Is there a new hotfix for the same issue on DPM 2012? I am hesitated to apply KB2465832 since it also includes many other fixes for DPM 2010, which may not appicable for version 2012.
Please help.
Thanks,

This is a hands off solution to allow all users that use a machine to be able to restore their own files.
1) Make these two cmd files and save them in c:\temp
2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
<addperms.cmd>
Cmd.exe /v /c c:\temp\addreg.cmd
<addreg.cmd>
set users=
echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
REG IMPORT c:\temp\perms.reg
Del c:\temp\perms.reg
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
That's a good one! Thanks for that.
I've been scripting on KIX for some time, so here is mine, hope it helps to someone... (it's probably not the best, but it works)
========================================================================
$RC=setoption("WOW64AlternateRegView","on")
$DPMkey = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection"
$uservariable = "%userdomain%\%username%"
If KeyExist ($DPMkey)
$Userstring=ReadValue($DPMkey, "ClientOwners")
If $Userstring == ""
WriteValue($DPMkey,"ClientOwners", $uservariable, "REG_MULTI_SZ")
? "Key created"
else
If not instr($Userstring,$uservariable)
$Userstring = "$Userstring,$uservariable"
WriteValue($DPMkey,"ClientOwners", $Userstring, "REG_MULTI_SZ")
EndIf
Endif
EndIf
==========================================================================
The problem actually is that you still need to use an admin account to write on the registry, so ensure you configure it properly on the schedule task.
In case you use a service account on the schedule task... the "$uservariable" will get populated with that account. As a work around to this... I changed it for the following line:
=========================================================
$uservariable = ReadValue("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI", "LastLoggedOnSAMUser")
=========================================================
The only problem with that, is that key gets created/updated only if user gets logged phisically on that PC, but will not work for anyone connecting through RDP.

UNIX command required to elevate end user Admin privs on mac

Hi All,
I thought this would be easy but we've drawn a blank.
So much detail online and in the ARD manual seems to be about setting admin priveledges for end users of actual ARD.
What we would like to do is to make the user an administrator of their computer temporarily.
So rather than browse to their computer, take control, log them out, log in as administrator, go to accounts and then select eheir account and tick the "Allow user to admister this computer" box - I was looking for a UNIX command that coudl be sent.
Any help greatfully recieved.
thanks
Gareth

I believe this will work, but test it on a testbed system first. Send the following UNIX command to the target computers:
dscl / -append /Groups/admin GroupMembership ARDusername
where "ARDusername" is the user you want to add to the admin group. To remove the user's admin rights, substitute -delete for -append.
Hope this does the job for you. If not, it should be close, so persual of the man page for dscl should help you to the correct syntax.
Regards.

End User Agreement required

Cannot open pdf files. Popup asks for end user agreement??????

Hello,
Welcome to Adobe Forums.
Do you have a MAC or Windows ?
Please try changing your Screen resolution and then you will see the "Accept" button for End User Agreement.
Thanks,
Vikram

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can I make a top layer "transparent" to the end-user?

Hi guys,
Got a quick question.
I'm working on a custom card builder and was wondering if there was any way I could keep an uploaded image editable to the end user. The end-user will be able to choose what template they'd like to frame the image with. The problem is, even with transparency that chosen frame acts as a layer, and once the uploaded image has been placed onto the staging area, the end-user loosing the ability to edit/scale/skew that image. I'd like them to be able to still do that even with the template above their image.
Can anybody think of a solution to this? Any and all advice is greatly appreciated.

You'd literally need to chop each frame up. To keep things reasonable to update you can use Photoshop to slice the graphics, saving them to external PNGs to import in. If a frame has 4 edges, you cut out the 4 sides, import into Flash and reassemble them inside a single Sprite or MovieClip. Any area inside that sprite that has no actual objects will be true transparency and won't invoke a click action.
Keep in mind, hitboxes are rectangular. If you have an oval frame where the edges require you to create bitmaps with transparency on their edges, that will be clickable. If you don't immediately understand what I mean by that just draw a circle in flash, convert to clip. Now draw your cursor around what you consider the 'top' portion of that frame and notice how much of the inner fill you also capture at the same time. That will all be clickable. So the user may "see" their picture behind the frame but when they click they accidentally get the frame instead.
Picture worth a thousand words (random net image):
If you cut this oval frame into 4 pieces (this being the top obviously), the transparent area you see in the frame will need to be part of the hitarea for the frame. That can be just as confusing to customers in this situation. If most of your frames have little to no transparency (very squared up) then it won't be a problem. Although just like the problem you're having now, any bitmap transparency WILL be clickable even if you cut the sides up. The center where there is no bitmap can be clicked through to mess with the picture behind the frame.
This sort of makes the transparency detection a bit more desirable.

End User will build the report by himself by choosing the columns from tabl

We are using Oracle 10g Application server (Forms and Report Services), Forms and Report., our most urgent requirement is End User have to build the required reports by him Like wizards style, (Example Adhoc, MIS reports)., More clear, from the form we want to show all the tables structures, queries, after that end user will choose some columns from the form and specified the condition by himself to run the report after that he will press start button , then automatically report has build for the selected columns from the end user., and this report is parmanent afterwords., he can use any time.
Like this kind of report building is possiable , anyone has faced same situation.

Yes it is.
In BW, this can be achieved by using document management. The option will be available to the user via context menu in the report (goto-->documents - text/pdf/img etc). In your case user can choose to create/change/display a 'text' document, which will be attached to the report.
cheers,

Is there a way to have an AppleID for an end-user without credit card info attached to it?

I am in charge of managing the Macs in our department. We have purchased a volume license for Mountain Lion (can't jump to Mavericks yet until we upgrade other software). I have a code to redeem, but the end-user is supposed to have an AppleID. I went ahead and started creating one for her, but it asks for credit card information, and corporate does not wish to have this information attached to an end-user's ID - they just want to supply it at the time of purchase for any future purchases (fear of identity theft and/or unauthorized purchases, I guess).
Our Mountain Lion software is already purchased, so Apple shouldn't need the credit card info for us to be able to install it. I can't install Adobe's Creative Cloud software until she's at least up to Mountain Lion … I feel I am hitting a major roadblock here! Any suggestions? Is this a new requirement? My own AppleID (for work) that I've had for awhile has no credit card currently attached to it … must not have been required at the time.

Try this on that Apple ID to get the None payment method option;
This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
https://discussions.apple.com/message/24907941
Then in the future use Apple's suggested method to create Apple IDs that don't require a credit card.
Creating a new Apple ID for an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
http://support.apple.com/kb/HT2534

Help! ADF default behavior rejected by end users...

Hi,
We have built an ADF 11g application during the past months. Last week we had our first user acceptance test with a small group of users. The users were very satisfied about the nice looks of the screens. But they had quite a lot of issues with the default behavior of ADF. I'll provide a list of the most important issues below. I hope more people here at OTN have experienced these issues and perhaps have some workarounds. And perhaps Oracle can use lists like this to improve the next version of ADF...
<ol><li>Multi record edit We have a lot of multi record edit screens. These are all editable tables. Those tables have the following problems:
<ol type="a"><li>Whenever a partial refresh occurs, the whole table gets reloaded. This takes some time, which is uncomfortable. But the main problem here is that the table does not preserve the scroll bar position. The situation can be improved a little bit by setting the <tt>displayRow</tt> attribute to <tt>"selected"</tt> on the table. This will cause the table to show the selected record at the top of the view port after a refresh. But this still confuses the end users. In their experience the records are randomly jumping around.</li>
<li>Records are not always inserted at the bottom. (In fact, they are inserted above the selected record.) End users simply expect records to be inserted at the bottom of the table, no matter what. And I can't disagree with them. Isn't there a setting to achieve this in ADF?</li>
<li>Whenever the user navigates to another record in the editable table, all validation rules on the record he navigates from are fired. That means he cannot leave a required field empty to fill it later. The end users say this is very annoying. We would like to delay all validation until the user presses the Commit button. But as far as I know this is not possible, is it?</li>
<li>The selected record position is not preserved on a full refresh. Our Commit button forces a full refresh of the page. This sounds like a sensible choice to me. However, users tend to click on Commit quite often. But after a full refresh of the page, the currently selected record in a record set is always reset to the first record in the set. In a large data table, this annoys the users very much. Isn't it possible to preserve the selected record over a full refresh?</ol>
<li>Annoying validation errors Many end users are annoyed by the somewhat "persistent" validation error messages. In a larger form or an editable table, users sometimes want to ignore an error and first enter other data, before correcting the error. This is hardly possible, because ADF sets the input focus to fields with errors and keeps popping up windows with a list of fields that have errors. We would like to make the validation less "aggressive". It is okay to give a field a red border if it contains an error. But leave the input focus where it is. And don't show any popup until the user presses the Commit button. And even then show the popup window only once.</li>
<li>ADF BC caching and business rules in the database We have some business rules in our database that automatically fill some fields with default values. We have e.g. a master-details relation, where a value in the master record is calculated based on the values of the detail records. We have set the calculated field in the master record to "refresh after update" and "refresh after insert". Sometimes the value of the field gets refreshed, but sometimes not. Users know that the field should be calculated by "the system", and are asking if they did something wrong if it doesn't. I know we could do the calculation in ADF, but our policy is to have all business rules in the database and to not repeat ourselves (DRY). Is there another way to guarantee that the calculated value in the master record gets updated after an update or insert of one or more detail records?</li>
<li>Partial refresh loses data If a field causes a partial submit to occur, fields in the same record that were not (partial) submitted before lose their data. This forces us to enable partial submit on all fields. But that causes a delay after moving the focus to the next field and validations to be fired too early.</li>
</ol>
I've numbered the items above, please use these number as a reference if you're posting an answer to a specific question.
Please let me know any solution, even if it is only a partial solution. We've a nasty situation now. Our application is (nearly) finished, but it is blocked for production by the users because of the behavior of the ADF framework, on which we have very little influence. We can't blame the users for that, most of their criticism is fully justified. So we have to come up with a good solution for these issues before we can go to production. So any help would be highly appreciated!
Best regards,
Bart Kummel
PS.
We're using JDeveloper/ADF 11.1.1.1.0, we deploy to a WebLogic 10.3.1 server and we have an Oracle 10g database. We're using the full ADF stack: ADF Business Components, ADF Bindings and ADF Faces.

Hi Bart,
I can answer for few of your questions.
Bart Kummel wrote:
Hi,
We have built an ADF 11g application during the past months. Last week we had our first user acceptance test with a small group of users. The users were very satisfied about the nice looks of the screens. But they had quite a lot of issues with the default behavior of ADF. I'll provide a list of the most important issues below. I hope more people here at OTN have experienced these issues and perhaps have some workarounds. And perhaps Oracle can use lists like this to improve the next version of ADF...
<ol><li>Multi record edit We have a lot of multi record edit screens. These are all editable tables. Those tables have the following problems:
<ol type="a"><li>Whenever a partial refresh occurs, the whole table gets reloaded. This takes some time, which is uncomfortable. But the main problem here is that the table does not preserve the scroll bar position. The situation can be improved a little bit by setting the <tt>displayRow</tt> attribute to <tt>"selected"</tt> on the table. This will cause the table to show the selected record at the top of the view port after a refresh. But this still confuses the end users. In their experience the records are randomly jumping around.</li>You can set the fetchSize in the iterator to a minimum value (Say if you are displaying 20 records in the table at a time, you can set the fetchSize to 20, so that, it will fetch only 20 records at a time, and the remaining records on demand basis, i.e they will be fetched when you scroll in the table).
<li>Records are not always inserted at the bottom. (In fact, they are inserted above the selected record.) End users simply expect records to be inserted at the bottom of the table, no matter what. And I can't disagree with them. Isn't there a setting to achieve this in ADF?</li>I suppose you are using the default createInsert operation. You can write your own method instead of the default createInsert, which would have something like
public void customCreateInsert(){
vo.last();
vo.createInsert();
}You can expose this method as method action and use it in place of default CreateInsert.
<li>Whenever the user navigates to another record in the editable table, all validation rules on the record he navigates from are fired. That means he cannot leave a required field empty to fill it later. The end users say this is very annoying. We would like to delay all validation until the user presses the Commit button. But as far as I know this is not possible, is it?</li>You can set the immediate property to true for the column for which you want to skip the validation. However, the validation will fire when you submit / commit the changes (which is expected).
<li>The selected record position is not preserved on a full refresh. Our Commit button forces a full refresh of the page. This sounds like a sensible choice to me. However, users tend to click on Commit quite often. But after a full refresh of the page, the currently selected record in a record set is always reset to the first record in the set. In a large data table, this annoys the users very much. Isn't it possible to preserve the selected record over a full refresh?</ol>Again, you can have a custom method, which would get the current row, commit the transaction and do a setCurrentRowWithKey to point to the last selected record after commit.
<li>Annoying validation errors Many end users are annoyed by the somewhat "persistent" validation error messages. In a larger form or an editable table, users sometimes want to ignore an error and first enter other data, before correcting the error. This is hardly possible, because ADF sets the input focus to fields with errors and keeps popping up windows with a list of fields that have errors. We would like to make the validation less "aggressive". It is okay to give a field a red border if it contains an error. But leave the input focus where it is. And don't show any popup until the user presses the Commit button. And even then show the popup window only once.</li>You can add a af:messages tag in the top and set globalOnly to true. Also, set the immediate property for the items to skip the validation when they tab out.
<li>ADF BC caching and business rules in the database We have some business rules in our database that automatically fill some fields with default values. We have e.g. a master-details relation, where a value in the master record is calculated based on the values of the detail records. We have set the calculated field in the master record to "refresh after update" and "refresh after insert". Sometimes the value of the field gets refreshed, but sometimes not. Users know that the field should be calculated by "the system", and are asking if they did something wrong if it doesn't. I know we could do the calculation in ADF, but our policy is to have all business rules in the database and to not repeat ourselves (DRY). Is there another way to guarantee that the calculated value in the master record gets updated after an update or insert of one or more detail records?</li>We need some more information. Do you see any "pattern" on which this things occur?
-Arun

End User Requirement

Similar Messages

Maybe you are looking for