Endless reboot after 1.1.3 ... works fine when plugged in.
Hi - I updated to 1.1.3. Ever since, my phone reboots a short while after I unplug it (from a computer or a wall charger). It reboots endlessly until I plug it in. It seems to work fine when I'm using it, but as soon as it's idle and unplugged for a few minutes, it starts rebooting. anyone else having problems like this? it really *****
-w
Yeah i had the same problem. i'm sure it's not the upgrade. i think it is the phone it's self. i took it in to the apple store and the gave me a new phone. the new one works just fine with the upgrade besides the problem with the sms that everyone else is having a problem with. dosen't put them in order it *****.
Similar Messages
-
My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?
We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.
-
Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?
Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock -
HT3964 macbook pro will not start on battery power works fine when plugged in
My macbook pro 15 inch early 2008 model will not start on battery power but works fine when plugged in.
check the battery info.. >about this mac>more info>system report and select "power" on the lefthand column. How many cycles? What does it say about the condition? etc.
-
Macbook works fine when plugged in, turns off when unplugged.
Hello all,
As stated my 2008 Unibody 13 inch, serial number W8******1AX turns on and works fine when it is connected to power.
When it is unplugged it instantly turns off and turns its fans on full until it depletes the battery (so it is obviously getting power.. just not where I want it)
Since the problem began I have tried two new batteries, neither of which had any different symptoms.
Before this, the computer had an intermittent life, it would turn off when it saw fit, which got progressively worse.
I have followed the guides to resetting the SMC but have had no luck
I have been running it without the battery (to save it charging and discharging for no reason) and sometimes when plugged in without a battery
the magsafe green indicator light goes from dim to bright.
With the battery installed it stays bright orange until it is charged and then switches to bright green.
(I have tried it with another charger, same symptoms)
Here is the Battery Read out;
Battery Information:
Model Information:
Serial Number: ?00€›Æ⁄¬+9tt
Manufacturer: GSA-1280
Device Name: ASMB016
Pack Lot Code: 3230
PCB Lot Code: 30db
Firmware Version: ddae
Hardware Revision: dac2
Cell Revision: 2b39
Charge Information:
Charge Remaining (mAh): 4113
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 4200
Health Information:
Cycle Count: 1
Condition: Normal
Battery Installed: Yes
Amperage (mA): 379
Voltage (mV): 12275
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Automatic Restart on Power Loss: No
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Battery Power:
System Sleep Timer (Minutes): 2
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00ebc719
Charging: Yes
Power Events:
Repeating Events:
Type: Wake or Power On
If this at all helps.
I'm at my wits end with this thing, I know it is getting on in age, but other then this, it has been flawless in its operation.
If anyone has any suggestions I would be happy to hear them.
Many thanks!!
<Edited By Host>There may be a hardware cause behind the symptoms you cite, so a diagnostic
is recommended to see which parts are weak or failed in the computer. A visit to
an Apple Store with Genius bar may be helpful, as they can perform testing there.
A call ahead or use their web page, to schedule an appointment, is advised.
In the US and Canada, the Genius bar at a retail Apple Store can perform
a diagnostic service, for no fee, even on Apple products without AppleCare.
See links:
Apple - Concierge
Genius Bar - Apple Retail Store:
http://www.apple.com/retail/geniusbar/
List of Apple Stores, cities, countries:
http://www.apple.com/retail/storelist/
Also authorized Apple service providers who can test, repair and guarantee their
work should be able to handle an out-of-warranty older Mac, within age limits...
Ones too old for the Apple Store could be serviced at a Specialist, instead.
•Find Locations - Sales, Service, Training, Consulting:
https://locate.apple.com/
•Did you try resetting the System Management Controller?
Intel-based Macs: Resetting the System Management Controller (SMC)
•A reset of NVRAM may help with some issues:
About NVRAM and PRAM
•Calibrating is part of maintenance, esp with older portables:
Apple Portables: Calibrating your computer's battery for best performance
•The power adapter can be problematic and cause issues, so there's this:
Apple Portables: Troubleshooting MagSafe adapters
Also another item, other than keeping the magnetic connections clean of
debris, grime, and corrosion, is to check the MagSafe Board or have it
checked as part of a greater diagnostic. This board is behind the port
that supplies the computer and the battery with power from the adapter.
When it partially fails or if/when one of the connecting wires or plug fails
you can find odd issues or partial use. The battery may charge but it
may not be able to power the computer, and other odd effects.
https://www.ifixit.com/Device/MacBook
In older portable Macs, this was generally called a 'DC-in board' and as
such, you could read about it in an iFixit repair guide for the MacBook
model you have. These vary so the matching article is recommended to
see if that is something you may want to try. But I would have diagnostic
testing done and avoid additional damages from attempted DIY efforts.
There have been a few reports of other failure on the logic board that
contributes to a partial failure of the charging system, so about all this
may do is troubleshoot around the failure without finding an exact cause.
However it goes...
Good luck & happy computing! -
My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?
I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.
-
After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.
I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?
well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.
-
Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
I`ve tried restarting, rebooting, nothing works.
The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile numberEcuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/. . The more people that bring this to their attention the faster it will get fixed
-
I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.
Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks! -
I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
IanIt turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.
-
my iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still? please help
http://support.apple.com/kb/ts1398
-
Hello!
I have a page with a list view web part. I am applying multiple filter parameters to it: I have to display documents for all US locations (general) and also filtered view of documents for user's office location. I am setting the user location Cookie and
i have configured webpart with Param to read it. Second filter value is hard-coded (Non-specific location). It all works FINE when i set the list View to expand all groups by default. The problem starts when I set it to be collapsed from the start:
Collapsed group shows correct number of items to be inside but when i expand it, the 1 extra LOCAL item filtered by {PARAM} is missing from inside this expanded group. Only items filtered by a "hardcoded text param" are being shown. And
again - when i change the view and set it to be expanded by default - ALL items are being shown without any problem! Only thing that breaks it - setting of collapsed-expanded for this view groups. nothing else.
Any suggestion on how to work with this thing?
I can't make all groups expanded by default - too many documents, but it only time when it works.
I tried changing view design, other characteristics, but nothing makes it change the behavior so far.
I really want o avoid creating custom "hardcoded" views for each location where location is predefined instead of dynamically read it from cookie. For me it looks like something is connected with PARAM as only these items are affected by this weird
behavior. Thank you in advance!Hi Olga
I have tried the method you have mentioned, but the jquery function is not working to collapse the groups.
I have tried 2 approaches, but none of them is working fully:
1) Raising the Click event as follows
for (var i = 0; i < links.length; i++)
if (links[i].href == "javascript:" && links[i].onclick.toString().indexOf("ExpCollGroup")
> -1)
links[i].click();
2) ExpCollGroup()
Please suggest or send the correct method to collapse -
My "Apple TV" is hooked up via HDMI to my Marantz receiver. Everything works fine when watching movies. When trying to watch a show or listen to music, there is no sound. Has this happened to anyone else?
Perhaps you should ask over in the iPad community, you may get better answers there.
It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
psoon, here's a link to the iPad community:
Using iPad
Maybe you are looking for
-
Hello All, I got a new MacBook and would like to import my iTunes library from my old G5 exactly the way it is with the playlists. When I select import from my new macbook or export from my old G5 it won't allow me to select whole playlists. If I jus
-
JSF Portlet input text enter key submission
Hi, I have a portlet having input text fields and having command action button(hx:commandExButton). But I have a requirment when I presss enter key in the input text fields instead of submitng form, I want submit command action button. Could you plea
-
How should use jmf to broadcast bigger media file?
Hello! I have a question about JMF RTP I use the AVTransmit.java to play a video file. but it show error this is error message: java.lang.ArrayIndexOutOfBoundsException at java.lang.System.arraycopy(Native Method) at com.sun.media.codec.video.mpeg.Pa
-
No Paid Apps on pre 2 Bell Canada
Hi, I received a Palm pre 2 from HP unlocked. When I activated it, on Bell Canada, I noticed I have no access to paid apps... I also only have limited free apps. I can see angry birds on the Featured apps, but If i click on it it says "no Package f
-
Smooth End Crawl Motion in 23.98 Encore Project?
I have a PNG file that is the end credits for a crawl. Looks awesome at 60 fps, but at 23.98 it's awful- lot of stutter. I need to author a Blu-ray disc where the movie content is 23.98.... Any thoughts on how I can keep the end crawl at 60 fps, wh