My iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still, please help :)
my iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still? please help
http://support.apple.com/kb/ts1398
Similar Messages
-
Please help me! my ipod wont play music or unlock itself. i updated to ios5 thinking this would fix it and it wont work still. it is now locked at the lock screen and the little slider bar thing wont slide over. its stuck. and i dont have an apple protection plan because i bought this ipod touch off of a friend 8 months ago. i really dont want to have to spend 300 dollars for a new ipod touch. please help.
I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do
-
I'm trying to update my iPhone 4s to iOS 7.1.2 and it just froze on the screen with the apple and the loading bar, it won't move and it's been like 45 minutes PLEASE HELP!
iOS updates can take a while, try back in an hour or so. My iPad took half an hour for an incremental update. And that was on a fast home WiFi.
-
I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)
Goto > Settings > Safari... Enable Cookies > Always
Good luck! -
hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?
put the phone in DFU mode (do a search for how to do this) and restore to the latest firmware. you may have to download the firmware from apple and when selecting restore or update in itunes press the shift key and select the firmware.
Hope this helps -
my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
Hi there,
Thanks for reaching out to the community.
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
Best of luck! -
Please help. This problem arises right after I upgraded to IOS 5.1. Thank you so much!
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Having problems with updating Firefox. It keeps on saying can not connect try again later.
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
Every time I go on my iTunes account via my iPhone or even my computer, I get notified that my security code is invalid. My account did this a while back, but I ignored it for a while and it eventually accepted my security code. It's not doing that now. It's been a week, I need to update my apps and want to be able to purchase whatever I want. It's extremely fruststing that it won't accept my actual card security code. Someone please help?
Is the address on your iTunes account exactly the same as on your credit card bill : http://support.apple.com/kb/TS1646 ?
-
I have had my Mac mini for about 6 years and I guess it had enough of me (haha), so the start-up disk got full and it shut down before I could empty files on my drive. Unfortunately, all these years I hadn't backed up anything and now I can't access anything since it won't boot past the apple logo (and the blue screen for that matter). I have tried rebooting (holding shift as the mac mini loads), but that didn't help since the start-up disk will still be full and stuck on the blue screen. I am now trying the single-user mode (holding command key+s), and I tried to delete files in the trash bin but all of the files are read-only and access is denied! so I basically can't delete anything on the mac mini (it says "Root device is mounted read-only"). So the key here is to change the permissions but I don't know how to exactly do that. Can someone help me figure this out? (and type the command in the unix language please!!) [ Note: We have two users on this mac mini if that helps.]
Run the following command:
mount -uw /
This isn't a permissions issue.
(87807) -
please help I downloaded Digital Editions to use e-book and when I got to open I get an error message
It says file could not be opened because it was either not a supported type or it was damaged. I have already had the file resent and in talking to the American Medical Association (purchased from their site) it appears when I go to open the file it is in Adobe Reader and I do not see an option to move it to Adobe Digital Editions,
Kathy Harlan
<mailto:[email protected]> [email protected]
Cell: 214-850-6427 -
i cant see down and the right side of the screen.down is the comercial,right it doesn't have nothing.i don't now what to do.it's start three weeks ago.please help me!!
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you! -
I have updated it to 4.3.3 abt 2 weeks ago. I have also tried rebooting it a few time but to no avail. You can email me at [email protected]
Thanks!!!!Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!! -
Having trouble installing my Canon Printer MG3560 to my Macbook. Have put software disc in but then it comes up with that comment.
~Bee,
I mentioned the Australian Canon download site because the MG3500 series printers are not mentioned in Apple's OS X: Printer and scanner software available for download page. The MX890 series is, so of course it needs no driver or additional software.
Maybe you are looking for
-
How to use Results from Another Query for SAP BW universes
Hi Everyone, I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure). Here in my first dataprovider I have 1200 rows of dat
-
Display PDF document in web browser
Hi, I have a smartform which is being triggered from Web UI. I got the data and converted it to PDF format. I need to display this PDF data in a web browser Pop up. Please let me know how can I do that. Thanks Abhishek
-
Create 3d cel animation look after effects
Im trying to achieve this look for a project I am working on. (Link below), The artist said that they only used after effects for all the cube animations, and was wondering if anybody new a tutorial or guide that would help with best way to acieve th
-
Button- opens new window- updates original window
I have been going crazy with this one. I have created a row of jlabels based upon data in an object. at the end of the row is an edit button that opens a new window to edit the data. in the new window is a submit button. every thing almost works how
-
Why does my r200 print pics dark in InDesign CS2?
I'm having problems printing pictures from Indesign Cs2 from my G4 powerbook (10.4.11) to an Epson R200. The images are way too dark. The original photos come from an old Nikon 3 megapixel point & shoot camera. I don't know much about settings suc