Endless WebService Pain

I'm at wits end with the WebService support in Flex. It's bad
enough to have recode a bunch of stuff for every hotfix, but Flex 3
seems to have just flat out broken web services entirely. Even the
wizard generated code doesn't work. All I get out of it is
"TypeError: Cannot marshall type '
http://www.w3.org/2001/XMLSchema::Object'
to simple content." Does anybody know of a backend web service tier
that the "latest and worst ever" WebService classes will work with?
I'm currently running Axis 1.4 under Jboss and WebLogic. That used
to work fine with Flex 2.0.1 hotfix 1. Now nothing is encoded right
on the client side (incoming or outgoing).

Problem with AppleTv is that so many other bits - network, itunes, OS - must be running fine for it to function properly. It could be your itunes library is somehow corrupted and it gets to an entry it can't do anything with for some reason.
You could create a new user account and set up a test library but if you sync that to AppleTV anything already on it will be deleted as you can only sync 1 library.
If that worked ok it might point to the other itunes library being at fault, in which case you could 'rebuild' the library (there's a support article for this somewhere) though I would warn you that any custom tags you've manually added to things in iTunes as well as some album artwork might get wiped in the process (this happened to me).

Similar Messages

Iomega External Hard Drive: "Invalid content in journal" - HELP!!

Greetings,
My Iomega Prestige external hard drive has just developed a problem—the exact same problem addressed in a 2008 thread in these discussion boards. I can no longer mount the HD on my desktop. I have run Repair Disk in Disk Utility. The following error shows up in red: "Invalid content in journal." There's a bunch of additional gobbledy-gook, but Disk Utility then tells me that "The volume Prestige was repaired successfully." Alas, not so. I still cannot mount the disk, and when I run Verify Disk in Disk Utility, the same error appears. Endless cycle, pain in the butt.
As I said, this exact same problem was addressed in a 2008 thread (I hope that link works), and a solution was proposed using Terminal and the instructions posted here. Well, that was six years ago, and I cannot get that solution to work now. I have a two-year old MacBook Pro with an Intel processor, and I have Mac OS 10.8.5.
Can somebody please help me out? Please?!

Do you have access to another computer to see if the drive will mount there?
I obviously don't know what is on the drive, but reformatting the drive might help.

Adding a WebService Client to a Web Application

Hi, Everybody,
I built a Bepl Module in which I had a ECHO WebService and the response parameter is a complex type.
Then I built a Web application, and used the WSDL file to add a WebService Client to a this Web Application,
but I found that the WebService Referrence dose not contain any method, so I could not add it in my jsp page.
But when I changed the Response Message Part Type into a simple one, everything worked fine.
*All the progress is the same as " [Using a Manually Created WSDL as a Web Service Client|https://open-esb.dev.java.net/kb/v2/javaeesetut.html] ", but change the simple type into complex type.*
I want to know if the WebService Client Referrence dose not support generating java code which contains complex type or I had a wrong operation?
thanks

There are current limitations with the wsimport functionality and an issue has been logged.
If you have a look at the blog entry from Andrew Hopkinson.....
[http://blogs.sun.com/toxophily/entry/javacaps_tip_migrating_a_simple]
...you'll see part way down what the WSDL must look like to work with wsimport, i.e.....
Message parts must be created using an Element rather than a specific type and the element must be defined in a local in-line schema.
This in-line element can only contain a sequence with a single sub-element of a specific Complex Type.
The name of the input element must be the same as the operation it will be used in.
nillable element option should not be used because this will cause your strings to be returned as JAXBElements and not Strings.
...etc....
Bit painful I know, but this is the only workaround until the bug is fixed.

What a victory: failed installs due to "shared technology" errors returns endless threads via Google

I purchased PSE 10 (download) and lit up an install. It failed. I searched Google and oddly, the moment I hit the terms "photoshop elements 10 install fail" I got 40-50 results for "shared technology" failures. You guys are failure stars!
By the way, I cannot thank you enough for wasting my day like this. Back in the old days one had to visit microsoft.com to waste an entire ******** day trying to get their poorly engineered product installed, after it's failed endlessly to do as expected. Bill would be proud, if he weren't busy out there earning billions of dollars by giving away millions...which is nicer than what I have to say about you right now. Who needs time with their kids? Install PSE!!! It's a great time soak!
So, with that, I beg of you to please start sending me the usual asinine, nonworking fixes-in-a-box to get this product installed on my machine, even though we both know it won't work. Meanwhile, I have purchased downloaded, installed, and started using the Corel's latest version of PSP, which nearly FLEW into my hard drive and immediately worked right out of the box. Boy, they suck, huh? No. They don't. You do.
I've followed the hilariously funny and equally useless advice on your help forums (my favorite: " If you are using a downloaded installer, or running the installation from the hard drive, the Shared Technologies can fail because of the installation path. Copy the installation files to a folder to the root of the drive." Really? So you're saying "to install this stupid product, first you must fix our stupid mistake." Love you. Truly, I do.) and nothing has worked. I assume you will end up pointing at Microsoft and calling them bad, since every other app on my computer works without this moronic, yet remarkably popular, failure.
And even if we get this (endlessly) failed implementation to work - emphasis on IF - I will probably de-install it and demand a refund, depending on whether PSP has their product up to par, which is far more likely than Adobe having a working fix.
Now, I will say for the record that I have been harsh, and snide, and nasty. I am tired, and frustrated, and it's been four hours, and I have had enough. Having said that, deal with it. I am your customer (for the moment). Why do I need to ask you to make your product work? Isn't that the point? Is it? Helloooo?

It has occurred to me that Adobe's support people may be cowards. Then again, I am being a jerk, and it's probable they may have read my comments and said "screw this guy." I might say that. Then again, if I worked for a world-class company like Adobe I might step up and defend my product.
Then again, I might not, because they fell off the tracks some time ago and failed to stay in sync with the technologies they need to work with (read: Microsoft) to the degree they have Google reflecting:
a.) Adobe's level of failure in compatibility given the immediate and numerous responses to the simple keywords "elements fail" returning an astonishing number of responses (mine at the top lately) and...
b.) Adobe's own technical staff offering roughly a dozen differing, non-working fixes to the issue and...
c.) Adobe's studied and intentional avoidance of my emails, this thread, and hilariously worthless chat support.
It is very likely the source of the issue is an administrator profile glitch on the MS side, or perhaps an MSI issue, but good luck getting that clarified from Adobe.
They!
Don't!!
Know!!!
And they don't care. All I can say about that is I am glad I only dropped sixty-odd bucks on this product rather than seven-odd hundred for CS6. Maybe I'd get support if I had, but these snotty threads would be YouTubed, Reddited, and published in the local paper.
Next: there has been a breakthrough! An amazing breakthrough!
Among the many useless and stupid bits of advice Adobe's staff throw around on the support site, there is a great recommendation to try to load the product in safe mode. Last night I booted into safe mode and tried to run the installer, which of course immediately popped a dialog box stating it couldn't run in safe mode, so there's Adobe's great advice for you. While I was laughing and taking screen shots for posterity I glanced at my desktop, and there it was: the Photoshop Elements 10 icon. What are you doing there? I double clicked, and viola! It was loaded all along! Opened right up with that blue screen with a thousand names of the dev team.
Wait. What? I thought it rolled back? It SAID it rolled back the install. No? That 5 minutes it spends “rolling back” it just pretends to roll back, deletes the icon, leaving my computer polluted with a product I already got a refund on from Amazon? Really?
Anyway I rebooted back into my normal state and lo and behold, the PSE 10 icon is still there on my desktop. It did not install from safe mode. It had been installed from the beginning, and for whatever reason booting into safe mode and rebooting back seems to fix whatever idiotic and mindless failure Adobe built into this thing which they couldn't otherwise help me fix. Plain reboots did not do this: only booting into and back out of safe mode.
Thinking I was imagining things, I got up this morning and checked. Yep. There it is on my desktop, working as if it had been there all along and I hadn't been ignored, avoided, led astray, given stupid advice, or sold a product that clearly wasn't ready for sale. PSE 10. Working. Seemingly fully functional. Glory be.
Now, since I am the one who fixed it, I was thinking Adobe should pay me. I spent about 10 hours fuming over this thing, and I bill $65 an hour as a consultant. I realize that I am not an Adobe coder or support specialist, but I fixed it and should be compensated for my time at my rate. A bonus is in order as well - call it pain and suffering. 10X$65 plus a little sweetener, let's call it a thousand bucks. What do you say, Adobe? Are you going to award my ingeniousness and brilliance? You couldn't handle it, and still can't, but I did it. Me. The bitchy, whiny one infesting your support board with angry hate. You owe me.
Yeah, I didn’t think so. Anyway, I have always liked PSE and have used past versions to great success. I think I will like PSE10 just as much, regardless the fact my view of Adobe is that much dimmer for the shamefully bad experience of late. This has been a pretty sucky couple of days, and from the boards and complaints I have found out it's the exception rather than the rule, but exceptional nonetheless.
Now I shall screenshot this thread and publish it everywhere I can find a place for it. I will call out the responses I received from Adobe (none) and the great support I received from Adobe (none) and the quality service I received from Adobe (none). Then I will do my level best to remember what the heck I was doing that made me want to buy PSE in the first place: there was a photo of...something, and I wanted to...do something. What was it? I've spent so much time in Adobe FailShop I have forgotten what I was doing here in this bottomless abyss of fail...
Ta taa, Adobe Support. Love you, really I do. True story.

Webservice Exceution in BPM Process

Hi,
Do i need to write any code for executing webservice in BPM Process.
The problem is i created process i am able see the work items in the UWL inbox .When the request is submitted it going to Approval inbox ..and once the approval is approved for creation
That should be created in the backend.But that is not happening??what could be the reason??
I am able to see the process in requestor and approval inbox ....all are fine but i could'nt see the output..?
Please can any one help me out??
ONE MORE DOUBT
Whenever I want to create a task iam starting the process so iam able to create one task.. if i want intialize/Create some tasks(100 tasks) what should i do??Do we start the process 100 times..?are anyother procedure?
Regards
Shwetha

Hi Shwetha,
You do not necessarily need to write code in case you rely on existing services. Typically some configuration is missing when the service consumption is not working as expected. Make sure that you did this before.
Could you please check the status of your tasks and processes in the SAP NetWeaver Administrator ("Manage Tasks", "Manage Processes"). The troubleshooting guide (mentioned in the forum description) might help you a little here.
In addition you could check the trace file if some other technical problems occurred.
Regarding your second request:
You do not need to start 100 processes for 100 tasks. That simply depends on your process model. You could prepare something like a loop which creates a task until a certain criteria is reached. But be careful not to run into endless loops here. That might cause massive problems on your system.
Hope that helps,
Martin

Placing Order = Nothing but a PAIN

I've been trying to order a new iPhone 6, but the hurdles are nothing short of endless...
1) I'm on a family plan that my mother manages. So the Verizon website wouldn't let me order a phone for MY number. ( I'm 31! )
2) When my mother gave me the account password, it took an entire evening to order the iPhone because:
- the website kept erasing my order from cart
- the website was trying to force me to change to MORE Everything plan
- the entire process was confusing because there was no explanation about the gift card for trade-in and my ability to upgrade. I was looking if there was another discount since I'm eligible for a new contract and phone but got no help at all.
3) When I finally checked out, I entered my credit card to pay for the phone, but it kept changing the name on the card to my mother. I attempted to correct this multiple times, but it never worked. I figured that since the card number and date was correct it would be fine, but no...
4) Now, I just got an email that my order isn't being processed because of the payment information and name of the account manager, my mother. I called to talk to representative and she wouldn't help me, because I'm not the account manager. Even though I could give her the account password. Even though I know the credit card number that's there to pay for the phone because its MINE!!! I still am getting no help.
5) So I just logged into my family's account and tried adding myself as account manager. It said there would be a confirmation code sent to my phone. I submitted the request 3 times and NEVER got a text with a code.
Now, I'm going to have to figure out how to have this corrected so I receive my order. Whether its that at age 31, I have to pester my mother for help to fix this because your company makes it ridiculously difficult to order a phone while on a family plan, that I have to go to a Verizon store and try to find a human being face to face that will cooperate and actually assist me so, or whatever to have your company actually send me a new iPhone.
What's really absurd about this, is I'm trying to make a purchase and give Verizon business, but this has been nothing but a complete pain.
If anyone knows how I to make sure I can get my new iPhone promptly and without any further problems, I would appreciate it.

1) Age has nothing to do with it. On a family plan, ONE PERSON is liable for all lines on the plan. If you want to have the authority to make changes to the plan, take over the plan from your mother(or simply your line). You can also have your mother add you as an account manager in order for you to make purchases/changes to the account. Of course any purchases/changes you make would be the financial responsibility of your mother.
5) Normally the password will be sent to the line of the account owner and/or account manager. Since you are neither, the text would not have been sent to your phone, but your mother's phone.
If you want to be in charge of the account, simply go to your nearest Verizon store with your mother to step up and take financial responsibility for the account. Otherwise, your mother will be the final say on matters pertaining to the account.

Why is it such a pain to create playlists?

On the mac you can use commandshiftN to create a playlist from a selection, but for some reason there's no shortcut for this on the pc, and it's a pain.
I transfered all my music to my PC b/c it's better than my aging powerbook, but I was too lazy to take the time to create endless numbers of playlists... but now my iPod is full, so I'm trying to organize everything into playlists, but it's taking forever... is there anyway to automate this? It would be really really really really nice if I could just tell iTunes "take all my albums and create a playlist for each one" rather than have to select -> file -> new playlist from selection 300+ times!!!
I think I'm getting carpel tunnel, Help!

That still gives me one giant playlist that is a pain to easily keep track of
Actually, it's much easier to keep track of.
Select the playlist then menu View -> Show browser.
This way you get to see the artist, albums and all the songs instead of a playlist name.
Select any of these and press Delete to remove from the playlist.
Drag albums from the library view to the playlist.
Sync the iPod.
(Not trying to simply drag this out but it seems what you are trying to is already very simple and will save a lot of work (creating hundreds of playlists). Many people have done very time consuming stuff only to find out they could have done the same with a few mouse clicks becaue they don't know or understand something about iTunes or the iPod.)

Hopefully useful tips for endless processing

I also posted this in reply to another user, but I think it might be useful enough to others that I will post it here so it's not so buried.
I'm just starting, after many, many hours, to see the light at the end of the tunnel with Aperture 3. I think A3 offers some great options, and is a diamond in the rough -- very, very rough, even in v3.0.1.
But I think I have some VERY USEFUL TIPS for you here (again this is after a lot of learning by pain... 4 different attempts to "upgrade" my A2.1.4 library (42K images about 200GB of images).
1st, and possibly most importantly the "SHIFT" key is your friend. You can use it when you restart A3 to stop the endless processing loop that A3 would fall into every time I upgraded or imported my library to A3 (or 3.01). All you need to do is hold down the "SHIFT" key while restarting A3, this should top all previously stuck processing as you upgrade your library. So use this tip after you first upgrade/import your library, if the processing bug hits. Then you have to be patient and go though your library and figure out where the problem files are (Apple has done a LOUSY job in not identifying what specific images A3 is processing in the "Activity Window" -- Let Apple know if this really bugs you)
2nd, at this point you will need to systematically go through your library and figure out where the "problem" files are and "fix" them (in my case all of these worked just fine in 2.1.4 - go figure). I would start by generating thumbnails for all of the images in a project, one project at a time (I had 150 some in my library). When you get stuck in the "processing" loop again, you can restart A3 using the "SHIFT" trick, and maybe just try a chunk of images within that same project until you find where things fail again, and until you can get to the offending image (if it's a problem you won't be able to generate a thumbnail for the image -- and A3 will go into endless "processing" mode)
3rd, this sound like a horribly tedious process and it is. But I can offer you some useful tips. In my case, and others as well apparently, a lot of the offending files are 16-bit PSD or TIFF images, especially if they had adjustments applied in A2.1.4. In my case I had fewer than 50 of these, so I exported an original and a jpg for each of these files. I re-imported the jpg and deleted the PSD/TIFF from A3 (I kept the exported original for future use). These files would then generate thumbs without endlessly processing. The other type of file that I ran into problems with were stitched panoramic images (often over 30MP) that I had applied adjustments to in A2.1.4. I simply removed the adjustments and the generated thumbs for them (worked like a charm).
4th, download some good podcast, music or audiobook... this will take a long time.
Cheers, and look me up in FaceBook I started a group called "Apple Please Fix Aperture"

Danny,
Funny you should mention this.... (actually it makes you look a bit like a "schill", even though you are not)... nope, as far as I can tell there is no way to tell which specific images are causing A3 to grind to a halt.
Hence my comment:
"(Apple has done a LOUSY job in not identifying what specific images A3 is processing in the "Activity Window" -- Let Apple know if this really bugs you)" and similar previous ones in other posts.
I wonder if Steve, yes that one, knew about this, being the perfectionist he seems to be, if he would have this feature included in Activity Monitor ASAP, or more likely it would have just been fixed by now (more of a "one-button" solution). Anyone have his house #?
In any case, I please let me (us) know if this helps resolve your problems... and consider joining the Facebook group as well and maybe we can hope for a much better 3.x.x version in the very near future.

Love the iPhone but Endless Spin with EDGE--Will it Improve???

I got the iPhone one week ago today and although I had a 30 hour wait for activation, all week I have absolutely loved everything about this wonderful product. I could not be more of a fan and have found many of the complaints of others, though obviously sincere, to be without substance in my case...except for ONE!
I can not believe how painfully slow the Internet Access is over the EDGE system. I am so tired of seeing that little Apple Star rotating in ENDLESS SPIN. If I am using WiFi it is fine, but the main idea of having this product for me was to be able to have access to the Internet when I was away from WiFi services!
Sometimes pages will not load at all and I just give up, other times they are so very slow that it becomes hopeless to try to browse or make any use of the connection, and this applies to Safari, Weather, E-mail, Google, and all the other features that connect to the Web.
I am not saying that EDGE does not work at all, or am I suggesting there is any flaw with the iPhone, I assume it has to do with the network, with traffic, or whatever. But my question is, are others having this problem to a degree that it is making you feel depressed about the otherwise wonderful product and its performance? And more important, will it improve?
Do we have any official word on that or even any acknowledgement from Apple or AT&T that there is a problem and that things will get better?
I have recommended this phone to many friends but I have to honestly tell them that this is a problem and if they drop their Blackberry and other services they need to consider this first. I have not used one of the other phones so I have no idea if they are better or worse in this area but I know the iPhone can not be successful without a good Internet connection. The whole idea makes no sense without it!
James

The short answer is really NO. EDGE speed will not get faster. IN fact, it has sped up over the past two months to the maximum in most areas. It is indeed true that some areas have slightly higher speeds than others, but none are super fast. 3G runs at 4 - 5 times the speed of EDGE. My EDGE service either here in Ann Arbor/Detroit or last weekend in NYC never has gone above 160 (some report upto 220 in some areas elsewhere). My old Blackjack 3G phone would never be slower than 880, and usually in the 1200 range most of the time).
That being said, I had a 3G phone from ATT which I hated even though it was fast. I am willing to take the compromise on EDGE for now.
A few hints:
- Edge speed seems to be faster in the early morning and in the evening than during the day when everyone is logging on - if you have wifi at work, switch over to that
- Set up mobile favorites rather than full internet sites -- they work about as fast as the 3G guy next to you on EDGE...for example, I have set up on my phone:
- m.yahoo.com
- m.yahoo.com/p/sports
- mobileapp.espn.go.com/wireless/espn/redesign/index
- webologistdesign.com/gomovies/demo/index.php
- m.USAToday.com
- m.NYTimes.com
IN order, I can check all my mobile favorites on yahoo, my selected yahoo sports teams, anything on ESPN, movies by zipcode (a clever app someone on this web site created!), USA Today, and the NY Times.
There are a lot of mobile (m) websites designed over the years to work with cell phones that are really fast and zippy and give you all the data you need without all the advertisements and photos that take up a lot of time to load on EDGE. Check your favorite websites and you will probably find a mobile version as well. You can even set up a mobile Google site that only looks up mobile websites when you seek data.
Finally, another idea - for those who want their sports scores, ATT has notification text messages you can set up for your favorite teams that will send you the scores at the end of innings, quarters, halftime, or at the end of a game. Pick the teams you want and have the scores sent to you with SMS without any internet lookup time needed. You can turn them on or off as you want from ATT's website.

Calling a local Webservice from ECC ABAP - Am I on the right track?

Hi all
In my NW2004s landscape I have an ECC system (ABAP 6.40, Java not configured/linked) and an XI system (6.40). My requirement is to call a Webservice (WS) from the ECC system.
I've converted an existing Java class (that contains 3 methods) to a webservice (WS) using NWDS. This WS has then been deployed to the XI system as it is the only one with a JAVA system. I'm able to view and test the WS methods using the Web Service Navigator on the XI system. The wsdl for the WS that was generated has the following format "http://<server>:<port>/<webservice name>/<configuration name>?wsdl (No .asmx extension as per most of the examples on SDN...not sure if this matters).
My understanding is that I should be able to create a client proxy in my ECC system (via Enterprise Services in SE80) using this wsdl and I can also configure a logical port throught txn LPCONFIG. I should then be able to utilise ABAP to call this webservice?
I've found the blog "/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap detailing this (for a 6.40 system)... but when I attempt the program I get a soap 111 error code Unallowed RFC-XML Tag(SOAP_EINVALDOC).
Am I on the right track? Is it possible to call the Webservice from ECC ABAP?
There are no dumps for me to analyse and I've also tried putting on RFC trace with no success.
Could it be that the WS is not correctly formed even though it works fine when tested from the WS Navigator on the XI system?
Thanking you in advance.
Malick

Clive Pennington wrote:
Thank you Eugene, your answer is most helpful. I supose I just wanted to do everything myself really. If when I have made my little movies, my animations and collated all my words and pictures I have problems assembling the documents then I can always get a professional to haul it together for me but I want to put in the donkey work first. I know it is a lot of money for the software but now the pain is giving way a little I'm really quite enjoying myself.
The planning which you have mentioned in your reply is of imense value I will start to do that immidiately, also the constant testing through Digital editions.
All this is really helpful and I thank you for you reply. I have made a brave attempt at some elementary annimation and posted them on youtube for testing, the urls are here if there is any interest. Basic and time consuming but I can do this much faster now.
http://tinyurl.com/348wjxg
http://tinyurl.com/2wzuhql
http://tinyurl.com/3yzjunk
Thanks again............ Clive
What comes through to me from your videos is that you know your material (of course, no pun intended) and that you have a clear sense of how to present it for clear communication to, and understanding by, your audience. Without this core, no amount of professional-level visual effects will achieve your goal, a great training program.
Regards,
Peter
Peter Gold
KnowHow ProServices

Get data from Sharepoint site in different farm using webservice, and current site using claims mode authentication.

Hi ,
I have a site that runs on Claims Mode ( NTLM) . That site has a web part that needs to show the data from any sharepoint farm, SharePoitn 2010 , or 2007 or 2003.
I am getting 401 unauthorized when I try to get data from webservice running in sharePoint context.
But when I run the same code in Windows Console application then it is giving no error.
What I doubt is that this issue is due to the reason that I have set
claims mode authentication.
Because same code is running in different farm in a site that is configured using windows authentication.

So generally speaking, you're talking about a VERY long running topic of authentication methods... and generally speaking, in the world of Windows, the only long running authentication options have been:
- NTLM (limited to one hop)
- Kerberos (unlimited hops)
- Application level authentication (ex: SQL auth, also, no hops)
Recently, Microsoft has been investing in Claims Based Auth... and I fully expect claims to start working their way into other systems (previously starting to work into Windows via the CardSpace technology, but also in other ways such as Win8's ability to
log in with a LiveID)... but building a new authentication method into ALL applications is a VERY long process, and the complexity of claims adds a LOT of consideration (claims from the same AD can look VERY different depending on the STS, so lots of questions
around things like bridging claims).
So as far your SP auth needs...
IF both applications are CLAIMS AWARE, then you MAY be able to use claims (which support unlimited hops)... but that's just not very likely yet (and will probably take another 5-10 years to be available across the entire enterprise)... otherwise, KERBEROS
Outside of the Microsoft world... KERBEROS is open spec, so is supported by other systems (such as authenticating to linux)... claims based auth is also open spec, but again, still new... there are a few other options (LDAP, etc), but none that are native
to Windows (so you rely on things like third party auth modules for Windows, which Novell has done for DECADES with NDS and eDir)
And again, SharePoint can convert claims to Kerberos using the C2WTS... which MS uses internally for things Excel Services connecting to a backend SQL server... but it DOES require the Kerb and C2WTS configuration.
if you're having issues using Kerb auth... then it sounds like Kerb isn't configured correctly... and Kerb is a PAIN to configure (whitepaper for SP Kerb is ~100 pages long)... IIS (and SharePoint) also has the added benefit of failing over to NTLM if Kerb
fails (and you shouldn't disable this behavior, since it'll break other settings elsewhere)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Testing webservice using Weblogic's test client

Hi,
Getting this when I start the test client to test the webservice, looks like its a MAC address....what i expect is the IP address, bit of a pain having to type the ip address each time. Any help would be great.
http://[2002:1011:cd64::1011:cd64]:7001/wls_utc?wsdlUrl=http%3A%2F%2F%5B2002%3A1011%3Acd64%3A0%3A0%3A0%3A1011%3Acd64%5D%3A7001%2Ftransactions%2FTransactionService%3FWSDL
Using weblogic 11g running on Windos 7, this is my test machine.
regards
David

An alternative is:
use txn WSADMIN and open the node for your web-service. Then, press the 'Rench' button or F8 to open the web based test tool.
You need to provide logon credentials if basic authentication was required for the WS.
Pls reward points if helpful.

Running webservices prevents clean shutdown ?

We're using OC4J with eclipse and the development team has to go through the pain of restarting the appserver twice each time we stop/start. After fixing the localhost/127.0.0.1 problem (see *1), things worked smoothly until we started developing webservices. I didn't put it together until the following email arrived in my inbox this morning..
Notice how you have to restart OC4J twice since it won’t entirely remove the application the first time?
This is caused by our super sweet JAXP web services. If you don’t really care about deploying those there is an ugly hack to work around this problem – delete the webservices folder (from your disk not SVN) and the PublicAccessServiceBean which really belongs in the web services folder along with it’s test case. In fact if the web services were in a separate project/jar that the developer could optionally deploy we would have a better solution to this problem.
There must be a way to disable the deployment of the webservices in OC4J which would be a much more sane approach to fixing this problem, but it’s not apparent to the casual user as how that would be done.
I've search the forums and haven't been able to find a direct reference to the webservice problem. Anyone have any ideas ?
(*1) shutting down oc4j fails in eclipse

A solution bubbled up.. for future reference-
For those of you encountering the annoying need to restart your OC4J server within eclipse there is an alternative to removing the webservices folder. It’s a bit of a hack but a bit nicer (especially if you have to modify the web services!) It involves modifying the ant script used by eclipse to deploy to oracle. This script is located in your eclipse plugins folder under:
..\org.eclipse.jst.server.generic.oc4j_1.5.0.v200606130315\buildfiles
and it is called oracle.10.1.3.xml.
Open it up and add the target “undeploy.j2ee.module” to the start of the depends attribute of the target “deploy.j2ee.ear”. If you do this the application will always be undeployed before deployment and should correct the web services deployment issue. The modified node should look like…
<target name="deploy.j2ee.ear" depends="undeploy.j2ee.module,check.skip.ear.deploy" unless="skip.deploy">
The only problem with this hack is that the application has to be deployed already before you modify the script because otherwise the undeploy will fail.

BEA WorkSpace Studio generates a ServiceControl having endless loop. Why?

Hello,
I've got a webservice WSDL file in my WorkSpace Studio and used the right-click 'Web Services --> Generate Service Control..." menu option to generate the control that will let me access the webservice later in my page flow controller. That has worked fine, I have my JSP trigger an action in the controller and use the Service Control that was generated to access the webservice. The problem is when I try to access the same Service Control directly from the JSP using DWR I get a StackOverflow error. Generating the Service Control from the WSDL results in a number of files being automatically generated to support the actual Control class that the PageFlow controller uses, and one of those classes is a ...BeanBeanInfo.java file. Within that BeanBeanInfo.java file is a method initCallbackEvents() that calls itself with no way to exit.
I'm trying to figure out why it was generated to call itself endlessly like that. How can I correct the situtation?
Thanks in advance for any help you can provide.
Gregor
[email protected]

You can't have Account customized through customization file. This is simply not supported. Try searching forum. It has already been discussed here.

JDeveloper 11g/Weblogic Webservices: Is there a test page like OC4J?

Hi All,
I am using JDevelope r 11.1.2.2.0.
I have begun the process of going from a JDeveloper 10/OC4J environment, to a JDeveloper 11g/Weblogic environment.
My initial steps to migrate the code (mainly webservices) was to go through a process of generating the web services from the WSDL and the dependent schemas.
I also refactored the previous web service implementation to make it better to Unit test etc, and seperate it out from the generated stubs, as it's always a pain to regenerate the stubs.
However, this seems fine, the unit tests run fine, but when I come to deploy the the integrated weblogic server I run across a problem.
Well, not a problem as such, but in the OC4J world, you used a get a nice HTML generated page at the end point, with this you could paste XML in and submit them to the web service.
However this isn't the case in what I have produced. I am not sure what actually generated it previously, if it was jdev 10 or oc4j or something else?
Is this the intention on weblogic, or am i doing something wrong? I only get a very basic web page with a link to the WSDL ant nothing much else.
I have been banging my head against a wall for a day or so with this, and any help appreciated, it would be really useful to get that test page up.
Thanks
Norm
Edited by: user2631187 on 14-Jun-2012 06:24

Additionally, there seems to be an issue with the bindings in the WSDL (see below)
We have 2 bindings and there seems only one servlet mapping in the web.xml, where in Jdeveloper 10 there were 2.
Does anyone know why this is ?
*<binding name="EToNSoap12" type="tns:EToNSoap">*
*<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>*
*<operation name="EToNrequest">*
*<soap12:operation style="document" soapAction="http://www.******/Schemas/ETON/EToNrequest"*
soapActionRequired="false"/>
*<input>*
*<soap12:body use="literal"/>*
*</input>*
*<output>*
*<soap12:body use="literal"/>*
*</output>*
*</operation>*
*<operation name="EToNping">*
*<soap12:operation style="document" soapAction="http://www******/Schemas/ETON/EToNping" soapActionRequired="false"/>*
*<input>*
*<soap12:body use="literal"/>*
*</input>*
*<output>*
*<soap12:body use="literal"/>*
*</output>*
*</operation>*
*</binding>*
*<binding name="EToNSoap" type="tns:EToNSoap">*
*<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>*
*<operation name="EToNrequest">*
*<soap:operation style="document" soapAction="******Schemas/ETON/EToNrequest"/>*
*<input>*
*<soap:body use="literal"/>*
*</input>*
*<output>*
*<soap:body use="literal"/>*
*</output>*
*</operation>*
*<operation name="EToNping">*
*<soap:operation style="document" soapAction="http://www.****/Schemas/ETON/EToNping"/>*
*<input>*
*<soap:body use="literal"/>*
*</input>*
*<output>*
*<soap:body use="literal"/>*
*</output>*
*</operation>*
*</binding>*

Endless WebService Pain

Similar Messages

Maybe you are looking for