Enhance Contrast does not stick

I like to enhance the contrast on my display to add a little pop to the colors, so I set the System Preferences > Accessibility > Display > Enhance Contrast slider to where I want it.  When I restart my computer, the slider is still set to the same spot but the contrast is back to the normal setting.  As soon as I adjust the slider, the contrast adjusts accordingly again, but to do this everytime I restart my computer is a pain.
I don't believe it is an issue with Mavericks, it was also doing it in mountain lion.  I have both an iMac late 2012 and a Macbook Air mid 2013, and it does this on both devices.
Any ideas?  Anyone else see the same thing?

CS5. And I should say, the instructions given on the Adobe site  on how to swap out the colors.xml file indicate a folder that doesn't exist. There is no Preferences folder. It's Configurations.

Similar Messages

  • Mouse pointer does not stick on fader when moving it

    Using Logic Pro 9. If I grab any fader, the mouse pointer turns into a small dot. If I then drag the fader up or down, the dot does not stick on the fader. Instead, I find I have to drag the dot well above or below the fader to make big adjustments. Is there any setting to control this? Or is this just how it is in Logic. In all other audio applications I've seen, the mouse pointer sticks on the fader when moving it up or down.

    No - haven't found a fix for this yet. I can only guess that maybe it wasn't as noticeable when display screens weren't so big. I'm running on a 27" iMac so the effect is quite pronounced. I supposed it could be argued that it gives you a finer grain of control to make small changes - but it really takes away from the 'feel' like you are moving a real fader.

  • Latest OSX Mavericks on an iMac..... Gmail, View, Sort By,  Date does not stick...

    Sort by date does not stick...
    Is there a solution?

    I've tried re-installing my iTunes software and searched throughout the forums and elsewhere without so far being able to determine how to resolve this difficulty.
    In case my original question formulation was not clear, in the past I could click on the header (while viewing my iTunes library in 'Songs' view) and cycle through "Album", "Album by Artist", in either ascending or descending order, and so forth.
    Now I'm only able to chose between "Album by Artist", either ascending or descending. There is no "Album" view option available to me, as there has always been in the past.
    I'm completely puzzled as to how this happened. Perhaps I inadvertently hit the wrong key combination while using iTunes and it changed something, I just don't know.
    I would really appreciate it if any other forum members have suggestions as to how I might fix this!

  • When I rearrange the order of my photos in an album, the order does not stick for exporting for a book.

    I manally rearrange my photos in an album, the order does not stick when I export to a folder in order to make a book.  Also, if I have given a title to a photo, it does not seem to export with the other pictures in an album.

    It's a little vague on what you're workflow is.  So I'll make a guess about the book: if you're dragging those photos into an iPhoto book they will be sorted by date.  So you would have to use the Photos ➙ Batch Change ➙ Date (with 1 minute between photos) menu option on those photos in the album before dragging them onto the book icon.
    Photos exported to a folder on the hard drive will be sorted by the Finder either alphanumerically or chronologically.  To get them in the manual order that's in the album you'll need to rename them via the Photos ➙ Batch Change ➙ Title to Text with a sequential number added to each photo.  Then export to the Desktop with the option to use the Title as the new File name.
    OT

  • Boris Title - Changes does not stick

    I'm making some changes on my Boris 3D text but the changes does not stick.
    I do a bevel on the text and press Apply, but when I see the result nothing happened. I go back in and it looks like I changed nothing. I click the check box but it does not help...

    Changes do not stick.
    Yrs. for proper English,
    Uncle Grump
    Thanks for correcting my English Uncle Grump
    I think the reason for my problem was that the text was not selected when I did the changes.

  • Enhancement view does not appear in my list of views

    Hi ,
    I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
    Please help!
    Regards
    Shilpi

    Check whether you are in Enhanced Version of UI Component !  (Original UI CMP name and Enhanceset : Z*)
    Thanks
    Allot points if this helps !

  • Code Coloring does not stick

    The changes I make in the Preferences section under Code Coloring do not always stick. I even tried replacing the Colors.xml file with someone else's theme. That does not come through. I replaced it both under my Configuration/Code Coloring folder  which appears under Applications as well as my User folder.
    I don't understand why some of the changes take and others not. Should there not be an easier way to do this??
    Any clues as to how I can make the new (external) Colors.xml stick would be appreciated.

    CS5. And I should say, the instructions given on the Adobe site  on how to swap out the colors.xml file indicate a folder that doesn't exist. There is no Preferences folder. It's Configurations.

  • Enhancement section does not visible at runtime

    I created enhancement section in SAP standard program, activated it but it does not visible at runtime. How do I make it available? Thanks!

    Hi Anthony,
    Have you implemented Implicit Enhancement?
    Once code is activated without error there is no other step required.
    Refer [Enhancement|https://wiki.sdn.sap.com/wiki/display/ABAP/ThenewEnhancementFrameworkandthenewkernel-basedBAdI] for more information.
    Regards
    Shital

  • Enhancement object does not exist for enhancement implementation

    Hi Experts,
    When i tried activating my implementation, i got the sujected error. any kind of inputs will be very helpful. This is an existing implementation and was last changed in October, I just wanted to added few more changes to that.
    Here is the long description of the problem.
    Diagnosis
    An enhancement implementation xxxxxxxxx was delivered to customers, but the enhanced object YYYYYYYYYY does not exist in the system. The corresponding record does not exist in Table .
    This can have different reasons:
    The enhanced program object YYYYYYYYYY  belongs to a different software component than the enhancement and this software component was not relevant for delivery.
    An error occurred during system setup so that the enhanced object YYYYYYYYYY was not imported.
    The enhancement implementation xxxxxxxxx is obsolete and the enhanced object YYYYYYYYYY has meanwhile been deleted or copied. As a result, there could be enhancement implementations in the system that have not been adjusted or that have incurred an error during deletion or renaming.
    Procedure
    Contact your system administrator and try to clarify the problem - if necessary, with SAP's help.

    Hi Reddy,
    1) Please go through the enhance implementation of that. 2) Check whether any thing activation is missing.3) Check the implementation class. It is better to understand if you explain for which badi you are using.
    Regards,
    Madhu.

  • Windows 7 Thinkvanta​ge Access Connection​s 5.41 does not stick to printer default

    hi
    i have installed windows 7 on 3 lenovo laptops (x60s, x61, t500) and installed AC 5.41 but and have configured them with 5 profiles each with their own default printer preferences but for some reason when i toggle from 1 profile to another the default printer setting does not change accordingly
    this is really annoying as i have managed to print documents to the wrong printer a couple of times and it seems to be accross the board on all my windows 7 installations
    is this happening to anyone else?
    cheers

    no i haven't
    i have now deployed 5 thinkpads (x200 with lenovo windows 7 installation disk) and 4 X61 and T500's with my own windows build and downloaded all the thinkvantage software using system update (had to manually upgrade to 5.42 as system update did not pick up on the updates)
    the printer default sometimes swaps over but often it just defaults to the original ms windows xps writer and not the the one i had specified.
    very frustrating, luckily a lot of my users do not switch locations very often and only print from 1 location but i have some laptop roll outs planned for users who do use this printer default settings a lot and i will get some stick for this.

  • Enhanced dictation does not work.  I've tried everything. Any help?

    Hello everybody. After downloading enhanced dictation (spanish-spain), the microphone seems to be Ok but no word is written. Regular online dictation works well. I use a mac-mini i7 16Gb and a micro connected to an external audio card firewire. I've tried to delete and download again several times, to clean the cache, turn on-off with resets,.. but nothing seems to fix the problem. Dictation is important for me to work and I'd like to try with enhanced dictation because I've read that it improves the performance with respect to online dictation.
    I've empoyed such a lot of time looking for a solution in the support community and other forums but nothing worked.
    Could anybody help me.
    Thanks so much in advance

    Ok, I reply to myself.
    The problem was caused by the microphone and the firewire connection. Enhanced Dictation is not ready to work with my audio hardware (micro Shure and Presonus audio card via Firewire). Although this audio hardware works fine with other software and even with online dictation, when I use it with Enhanced Dictation, the system seems to be working (the micro bars of the microphone in the screen move ok) but no words are written at all.
    The solution was to connect it analogically, using an audio connection between my audio card and the line-in connection of the mac mini (stereo).
    Hope Apple will solve this problem. I guess many people probably are having the same problem, mainly people with pro audio cards. I hope that this will help them

  • [X300] Mouse Wheel Scroll Lines Setting does not stick

    I often use an external mouse (no additional driver needed). After every reboot, the setting "Mouse Wheel Scroll Lines" in Control-Panel -> Mouse -> Wheel is reset to 1 (I am using Vista). This is really annoying because it slows down scrolling extremely.
    Does anyone have the same problem?
    I think its caused somehow by the ALPS touchpad driver (The X300 has a really bad one, the Synaptics pads built in previous Thinkpads were WAY BETTER).

    wfaz wrote:
    VPN User ...
    Have you made any progress?  I am having no luck getting the X300 touchpad to scroll with MANY applications: Photoshop, Illustrator, Access to mention some.  I use Windows XP - another user has complained that with Vista he does not getting scrolling to work with iTunes, Live Search.  Plus, wheel events are not handled by the Remote Desktop, so anytime you are tunneling, you don't get touchpad scrolling.  I have been expecting a new UltraNav driver for months - but nothing yet.  I think I have tried every combination of touchpad and trackpoint settings possible, but maybe you know something I don't.
    WFaz
    I am sorry but the problem you describe is a completely different one. Personally, I don' t care for these few applications, especially iTunes and further rubbish. Fact is, the quality Ultranav2 Driver is much much worse compared to the Ultranav1 which uses a Synaptic touchpad. Responsiveness, accuracy, supported applications, bugs are much worse with the Ultranav2 used in X300.
    AFAIK adding applications to support the touchpad needs just adding them to some list in registry or what. But as I said, I never cared for that. The problem that the driver resets mouse settings when using it, I find much more disturbing.

  • Time zone does not stick

    On my new MBP (late 2008) the time is permanently incorrect. Instead of GMT+1 (central European time) it shows only GMT. I've manually set it several times, ticked time server, closed the lock, reset the PRAM and started up in safe mode; to no avail. Date is correct.
    It is strange that when I set the time manually, the analog clock in the prefs panel shows the right time, while the digital one does not. Strange.
    I can't find any clearly identifiable prefs file for time settings.
    Does anybody have an idea? Thanks.

    VERY strange. TODAY I received an email from a friend in Mexico with a very similar problem, one that I'd never heard of before. Maybe there's a clock bug that started with the new year?
    Here's his message to me. Any comments would be appreciated:
    I just got a new MacBook Pro (notebook) from Santa. When I set the time
    in Preferences I of course chose my time zone which is Central Time
    (CST). However, when I did that, the analog clock in Preferences
    window shows one time and the digital clock in Preferences shows a 6
    hour difference (as does the digital clock in the top menu bar). No
    matter what I do to try to get the clocks to agree with one another on
    CST it simply does not work. As I move the analog clock manually the
    digital clock changes at the same time.
    The impact is that my iCal appointments I migrated over are all
    screwed up and the time stamp on emails are too.
    I have reloaded the OS that came with the PC. I have spent time on
    the phone with Apple Support and they are dumbfounded or mystified.
    Unfortunately my or their phone line cuts when I speak to them and
    then the call is a waste. +[note: He's calling from Mexico]+
    In the meantime, I have set the time to GMT since all the clocks agree
    and I can manage my iCal that way. But I'd like it to work properly, of
    course. Any ideas?

  • Enabling "Save This View" button - change does not stick

    Running SharePoint 2013 Server Standard
    I have several sites.  For some the "Save This View" choice when filtering a view is enabled.  However, there are some for which the choice does not display.
    I located the setting for this in Editing the Page, Miscellaneous options for which the check button is "Disable 'Save This View'" button.  I uncheck the box, hit Apply or OK.  No errors.  However, the change does not get executed.
    I have admin rights to do anything.
    Please advise as to other settings that may be overriding this.
    Any ideas?  Seems to be a bug.

    Check below:
    http://www.sharemuch.com/2014/03/13/how-to-do-advanced-sharepoint-list-view-filtering-with-query-string-paramters/
    http://office.microsoft.com/en-in/sharepoint-help/use-the-list-view-web-part-HA102771012.aspx
    Check server render option
    If this helped you resolve your issue, please mark it Answered

  • List View COLUMN organization does not stick

    i have been trying to organized the columns (left to right) so that, for instance, the size of the file and the pixel dimensions of the file show up right next to the name. i have been doing this in an Album (at least today) but i have not been seeing this "stick" as i seem to have to do it every time i open Aperture and need to see this List View in an organized way.
    can anyone help me with what i am not understanding here or what i am doing wrong?
    TIA

    i would like to take out everything except pixel size and file size and i am forgetting where this happens or what it is called.
    When you use View->Metadata Display->Customize,
    to select the columns to display in list view, as Frank Caggiano pointed out, you can also configure the display order of the list items. Just drag the items in the "Display order" pane into the order you want. And this order will stick between restarts of Aperture, at least it does this in my version. So use this panel to arrange the columns, rather than dragging the columns around.
    BTW: if you configure the display order also for the Browser view, and select to show the filesize and pixelsize first, in the metadata overlay, you can display the images with the filesize shown in the Browser.

Maybe you are looking for