Enhance the interface FLQ_SAMPLE_CHANGE_FDDATA ?

Hi Experts,
Enhance the interface of the sample module FLQ_SAMPLE_CHANGE_FDDATA* i have got this from the
sap note 87797. but i didnt get exact approch for this same, so please guide me with this. and i am working 4.7
Thanking you in advance....
Edited by: PLT123 on Apr 15, 2010 10:34 AM

Hi,
It is solved
Regards
Ravi

Similar Messages

Enhancing the Interface of a Function Module

Per SAP note 352697, I am trying to enhance the interface of module EXIT_SAPLPC32_003 via transaction SE37. I receive a message "Object FUGR XPCA cannot be enhanced; software component unknown cannot be enhanced". Is there a way to enhance this without requesting an access key?

Hi,
No, and enhancing the interface with the changes form SAP in a Customer enhancement would be a wrong thing to do (I think it would lead to some kind of name clash by support/enhancemant pack implementaion). You have to register and repair R3TR FUGS XPCA to implement the note.
cheers
Janis

Enhancing the interface of ECC-TM integration

Hello Experts,
My requirement is to add additional field to the interface passing data from ECC To TM.
The DTR interface OPS_SE_SHP_SEND_MESSAGE is required to be enhanced to pass additional field Customer Group (VBAK-KVGR4 ). The value retrieved should be added to XML structure and is required to process it.
After inbound processing in SAP TM of XML just sent, values should be stored in: /SCMTMS/TRQ -> ROOT -> CONSOL_TYPE
Please let me know if anyone has worked in similar requirement before.
Thanks in advance!
Pratibha Shukla

We have a similar requirement where we would like to pass field LIPS-KVGR3 in the DTR. Were you able to solve this, Pratibha?
Regards,
Steve Miller

Enhancing the extract structure for 0FI_GL_4, 0FI_AP_4, 0FI_AR_4

Hi all,
      Does anyone know how to enhance the extraction structures with additional fields for datasources 0FI_GL_4 (General ledger: line item), 0FI_AP_4 (vendors: line item) and 0FI_AR_4 (customers: line item).
Thanks,
Sabrina.

Hi
    Here are the two scenario's described in the note:
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above). Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
Example:   The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
2. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above). In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above).
           Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
           Example:
           The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
           ATTENTION:
           By using Note 430303 you can enhance DataSource 0FI_GL_4 by all fields from table BSEG (instead of BSIS); then the fields are filled automatically in the extractor.
1. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above).
            In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
1. After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
Please let me know.
Thanks,
Sabrina.

Enhancing the component ERP_H with a custom field in the web UI

Hi,
I'm facing an error when enhancing the component ERP_H with a custom field in the web UI.
I've followed the steps mentioned in the pdf document called "Enhancement Options for the Lean Order Interface" (Note
1224179):
I´ve done a enhacement on ERP_H component.
I added a field to the view Headerdetail called "ZZCCTYPE1", but when I set a value in UI, I haven´t read this field in abap code.
The SET method (SET_ZZCCTYPR1) in the context node is ok, in debug I see that the method current->set_property, is working fine.
I've tried to read the atribute with lr_entity->get_property_as_string ( 'ZZCCTYPR1' ), but doesn´t work. When I read other "standard field", the statement is ok and it has value.
When I set the value of the field from ECC (VA01/VA02), it is kept by the system.
Could anybody help me?
Thanks in advance,
Regards,
Andrea Ricci

Hi Pooja,
When you created your custom views, did you bind the view context nodes to the corresponding context nodes of your component controller?
From the exceptions you reported it seems that this binding is missing.
To create this binding, you can right click on your view context node , choose "Create Binding" and bind it to the context nodes of your Component Controller.
Hope this helps.
Regards,
Nisha

I like to know the table name where all the Interface name ( Data Type and

Dear Friends,
I like to know the table name where all the Interface name ( Data Type and Message Type in IR ) is stored.
Thanks.

Hi,
Please find the repository APIs in the SE24 class builder that can be used for accessing repository objects from the ABAP stack of SAP XI. Check CL_SRAPI* in the SE24 transactions for digging further.
location of interface objects
CL_SRAPI_DATA_TYPE---data type
CL_SRAPI_DATA_TYPE_ENH---data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE--fault message type
CL_SRAPI_MESSAGE_TYPE--message type
CL_SRAPI_INTEGRATION_SCENARIO--integration scenario
have a look at the table SXMSPMAST, SXMSCLUP & SXMSCLUR
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22#search=%22SXMSPMAST%20%2B%20XI%22
That document has references to lot of tables maybe it can be of use to u.
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
Edited by: Dharamveer Gaur on Oct 8, 2008 10:40 AM

Can the interface menus and icons be set a little larger in 64bit Photoshop version CS6 ????

Can the interface menus and icons be set a little larger in 64bit Photoshop version CS6 ????
It would be very helpful if the tools and font size choices were enhanced to Larger, Largest or custom enhance. Anyone know if that is an idea we can send to Adobe?

I wonder about folk who use small screen laptops with a high pixel density. I'd guess that there are 1920x1200 laptops with 17 or possibly even 15 inch screens, and Photoshop is going to be a nightmare to use on them. Heck, the notebook sized iPad 3 has a >2000 pixel screen! That sort of pixel density is going to work its way through to laptops, before too long. I have read about LED televisions with 4K (equivalent of four 1080 panels) and even 8K (equivalent of 8 1080 panels) screens. Is that going to work its way through to computer monitors? To be fair, we are talking about 60inch screens here, but nothing surprises me anymore when it comes to gamers and their hardware!!!
I have all but given up using Photoshop on my 19 inch laptop with a 1920x1200 screen because it is not comfortable compared with the 30 inch monitor I use for my main screen at home (also 1920 x 1200). This is a frequently asked question, and Chris has said it would be a major undertaking to upsize the icons, but it surely has to go on the list for the next upgrade.

Any way to upgrade iPod classic to enhanced user interface

I bought an iPod video just over a year and a half ago. Does anyone know if it is possible / likely that apple could release an upgrade to the new enhanced user interface? The latest upgrade has included the ability to search... it would be nice if they included the rest of the new OS.

Been discussed here ad infinitum, and as no-one here works for Apple we simply don't know what they may have planned.
The best place to let Apple know what you want is here.
iPod Feedback.

Enhanced Tax Interface in US Payroll

Hi,
Do we have any metalink note or any document discussing the implications of migrating from Standard Tax interface to Enhanced Tax interface.
Thanks in advance.
Sai.

You can try these below notes
https://metalink.oracle.com/metalink/plsql/f?p=130:15:9956005655351908020::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:Bug,5348394,1,0,1,helvetica
https://metalink.oracle.com/metalink/plsql/f?p=130:14:9956005655351908020::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,311749.1,1,1,1,helvetica
Hope this Helps
Regards
Ramesh Kumar S

Enhancing the standard Data source without deleting setup tables

Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran Manyam

Hi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal.

The interface connecting Lean-WM and inventory management

Dear experts!
Thank you for your attention!
I am confused at the interface connecting Lean-WM and inventory management.
there are so many concepts in this field, such storage location, picking areas, storage types and so on.
Could you please give me an real case or a illustration to discribe that how the interface connecting Lean-WM and inventory management works?
Best regard!
Tangdark

you do nto need to enter serial numbers while clearing inventory at WM level but at IM in case you have the serial profile activated then you need to enter serial numbers when clearing inventory from the IM level.
according to what you have said it should automatically pop up a screen where you need o enter the serial numbers but this is weird it is not doing.
Please check the following:-
Does the serial number profile config in OIS2 have "MMSL" as a property and if so is entry of serial numbers mandatory during goods receipt and issue ad if there is a stock check active

Error while opening the interface diagram

Hi All,
I am new to ODI.. I have created an interface..When I save the interface and re-open it, there is an error when I click on the diagram tab. I have pasted the contents here.
An internal error occurred while opening the diagram.
java.io.IOException
     at oracle.diagram.dif.DiagramIdeNode.getDiagram(DiagramIdeNode.java:226)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:408)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:326)
     at oracle.modeler.addin.ModelerNode.findOrCreateManager(ModelerNode.java:212)
     at oracle.modeler.addin.ModelerDiagram.findOrCreateGraphSystemFromContext(ModelerDiagram.java:338)
     at oracle.diagram.framework.editor.CommonDiagram.open(CommonDiagram.java:219)
     at oracle.modeler.addin.ModelerDiagram.open(ModelerDiagram.java:104)
     at oracle.odi.ui.etlmodeler.custom.OdiModelerDiagram.access$0(OdiModelerDiagram.java:1)
     at oracle.odi.ui.etlmodeler.custom.OdiModelerDiagram.open(OdiModelerDiagram.java:268)
     at oracle.diagram.framework.editor.IdeDiagramEditor.openDiagram(IdeDiagramEditor.java:264)
     at oracle.diagram.framework.editor.IdeDiagramEditor.open(IdeDiagramEditor.java:222)
     at oracle.modeler.addin.ModelerEditor.open(ModelerEditor.java:74)
     at oracle.odi.ui.editor.pop.OdiTabbedModelerEditor.open(OdiTabbedModelerEditor.java:633)
     at oracle.ideimpl.editor.EditorState.openEditor(EditorState.java:283)
     at oracle.ideimpl.editor.EditorState.createEditor(EditorState.java:184)
     at oracle.ideimpl.editor.EditorState.getOrCreateEditor(EditorState.java:95)
     at oracle.ideimpl.editor.SplitPaneState.canSetEditorStatePos(SplitPaneState.java:232)
     at oracle.ideimpl.editor.SplitPane.setCurrentEditorStatePos(SplitPane.java:1228)
     at oracle.ideimpl.editor.SplitPane$1.valueChanged(SplitPane.java:133)
     at oracle.ide.controls.customtab.CustomTab.fireSelectionChange(CustomTab.java:294)
     at oracle.ide.controls.customtab.CustomTab._setSelectedPage(CustomTab.java:625)
     at oracle.ide.controls.customtab.CustomTab.setSelectedPage(CustomTab.java:586)
     at oracle.ide.controls.customtab.CustomTab.selectPageAt(CustomTab.java:640)
     at oracle.ide.controls.customtab.CustomTab.mousePressed(CustomTab.java:990)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.Component.processMouseEvent(Component.java:6260)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4235)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Can someone please tell me the reason behind this error? When I save my interface, it does not show any errors and it works fine when executed. Due to this error, I have to re-create my interface over and over again.
Thanks,
SR

Has anyone found the cause/fix for this issue? Im getting the same problem. The previous post is a good effort, but useless since i cannot get to the Mapping tab (where the error button is) because im getting the error whenever i try. Im using the same version (ODI 11.1.1.3). I think its related to a model im using because i can recreate the problem by dropping the specific model into the mapping source along with any other model. I've reverse-engineered the model several times and it isnt fixing the problem. Ideas???
java.io.IOException
     at oracle.diagram.dif.DiagramIdeNode.getDiagram(DiagramIdeNode.java:226)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:408)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:326)
     at oracle.modeler.addin.ModelerNode.findOrCreateManager(ModelerNode.java:212)
     at oracle.modeler.addin.ModelerDiagram.findOrCreateGraphSystemFromContext(ModelerDiagram.java:338)
     at oracle.diagram.framework.editor.CommonDiagram.open(CommonDiagram.java:219)
     at oracle.modeler.addin.ModelerDiagram.open(ModelerDiagram.java:104)
     at oracle.odi.ui.etlmodeler.custom.OdiModelerDiagram.access$0(OdiModelerDiagram.java:1)
     at oracle.odi.ui.etlmodeler.custom.OdiModelerDiagram.open(OdiModelerDiagram.java:268)
     at oracle.diagram.framework.editor.IdeDiagramEditor.openDiagram(IdeDiagramEditor.java:264)
     at oracle.diagram.framework.editor.IdeDiagramEditor.open(IdeDiagramEditor.java:222)
     at oracle.modeler.addin.ModelerEditor.open(ModelerEditor.java:74)
     at oracle.odi.ui.editor.pop.OdiTabbedModelerEditor.open(OdiTabbedModelerEditor.java:633)
     at oracle.ideimpl.editor.EditorState.openEditor(EditorState.java:283)
     at oracle.ideimpl.editor.EditorState.createEditor(EditorState.java:184)
     at oracle.ideimpl.editor.EditorState.getOrCreateEditor(EditorState.java:95)
     at oracle.ideimpl.editor.SplitPaneState.canSetEditorStatePos(SplitPaneState.java:232)
     at oracle.ideimpl.editor.SplitPane.setCurrentEditorStatePos(SplitPane.java:1228)
     at oracle.ideimpl.editor.SplitPane$1.valueChanged(SplitPane.java:133)
     at oracle.ide.controls.customtab.CustomTab.fireSelectionChange(CustomTab.java:294)
     at oracle.ide.controls.customtab.CustomTab._setSelectedPage(CustomTab.java:625)

I'm missing the back cover and flap for my book. Doesn't show up in the interface. How can I restore these?

I'm missing the back cover and flap for my book in the layout interface. Does anyone know how to restore these? I've searched the interface but can't find an option to add cover/flap. Don't want to order a book without it.
Any advice is welcome!

Time to repair you library: do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.
3 - if necessary repeat with Option #1, Repair Permissions.

Getting error while running the Interface using AGENT

Hi All,
i am not able to run the interface using Agent service which running in the another machine, while running i am getting error message like
java.lang.Exception: Error during Session launching
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
i ran the Agent services in Comment prompt, there i am getting the error like follows
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.t(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
here i have mentioned the steps which i followed for creating agent service.
i have two machine namely A and B both having the ODI
i am going to use the B machine as a centralized server. so i edited the odiparams.bat file in B machine in ODI locaiton and filled the repository information
from A machine i opened the Topology and created the Agent service there i mentioned the HOST name as "B" and port number 20300. and i configure the logical agent aswell
from B machine i started the Agent service like agentscheduler "-port=20300".
Agent service launched seccessfully.
From A machine i tested the Agent. that also shown the successful window message.
then i started running the interface using the agent i am getting the error which i have mention in the beginging.
Interface which i ran will do the text file to table loading, so i kept that file in particular location in B machine( i have configure this location when i created the file data store in topology in A machine).
Please help me to solve the problem...
thanks
nidhi
Edited by: knidhi on Nov 26, 2009 6:54 PM

Thanks For your Reply,
I ran the agent as you said. here is my observation
from the Machine B where agent is actually running, i could able to run the interface using agent service.
but from the machine A while running the interface i am getting the following error message
java.lang.Exception: Error during Session launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
i have created both physical and logical agent with the same name "DEMO_AGENT", and i ran the agent in the Machine B like
agentscheduler "-port=20301" "-name=DEMO_AGENT"
Please help me to solvethe issue...
Thanks
Nidhi
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:05 AM

Expression must return the interface type in Transformation Step in BPM

hi,
We are getting below while activating the IP,
Expression must return the interface type SI_Send_AA
Expression must return the interface type SI_Get_AA
No semantic errors found
We have a Transformation Step in BPM,
In OM, Source is SI_Send_AA and Target is SI_Get_AA
Also Container variable points to the same Abstract SI's.
Few Thread's for Same are error are:
Error in BPM
expression must return the interface type
Transformation step in ccBPM scenario
Error while compiling Business Process
Even after checking these i am getting this Exception.
Please Help!
Thanks,
Mayank

Also Container variable points to the same Abstract SI's
Are you sure that you are using Abstract Message Interfaces only and that these are referring to relevant container variables.
Normally it happens that there is some mis-match between the message types/ interfaces that we use in the mapping and that we use in the BPM.
If still not solved, then delete the Transformation step --> save --> activate......then again Edit the BPM to include the Transformation Step.
Regards,
Abhishek.

Enhance the interface FLQ_SAMPLE_CHANGE_FDDATA ?

Similar Messages

Maybe you are looking for