Enhance the Time Dependent Tab of the Asset Master AS01
Hi,
My requirement is to enhance the Asset Master Client dependent Tab transaction AS01.
I have added a field in the ANLZ through some Append Structure.
And added that field in the Custom Screen.
After doing the functional config that field is visible.
In the Time dependent tab, when we press MORE INTERVEL PUSH BUTTON A new screen appear with certain fields which already present in the Time dependent tab.
Now my question is: How I can insert the new enhanced field in that and how we can save the data in ANLZ table.
We are using ECC 5.0 version, requirement is to add some fields similler to ECC 6.0 version in time dependent tab of AS01 transaction.
Thanks in Advance,
Hari
Edited by: Hari prasad REDDY 123 on Dec 17, 2009 2:52 PM
Hi hari,
Was this problem solved ? Wuld be great if you could le me know the solution .
Thanks!!
Similar Messages
-
What is the use of tab - "ALLOCATION" in Asset master creation (AS01)?
Hi experts...
in AS01, there are certain tabs like General, Time-dependent, Allocation, origine, Dep area...etc...
From these i am not understood the use of "Allocatio" tab. Please tell me when/why/where this can be useful?
Regards:
DasuThe evaluation group fields are basically used in asset reports for classifying the assets based on various freely definable user texts. The investment support tab is basically used if assets are also defined as investment support measures in ANVEST. Lastly the equipment tab is used if there is integration between assets created in Asset acocuntng and equipment created in PM-Plant maintenance module.
Thanks and regards
Kedar -
Hi Gurus,
We have recently upgraded our BI support pack from BW 701 SP 7 to BW 701 SP15. We are facing some transformation activation issue after the upgrade.
Can some one help me with this.
Thanks,
Shak.Hi,
Time independent.
Some more details,
Info Objects are active and I have tried RSDG_TRFN_ACTIVATE program to activate. Checked RSRV for both the info objects.
Thanks,
Shak. -
Asset Master Record - Time Dependent tab - locations to be created
Hi Guru's
Hot to create the new locations in the Asset Master Record - time dependent tab.
Some locations descriptions I need to change.
Please help me.
Regards
Jenny ConnesHi,
change your location description at following SPRO location:
SPRO->Enterprise Structure -> Definition->Logistic - General ->Define Location
Thanks,
Dharmesh -
Asset Master - Business Area field [time dependent tab]
Business Area field is gray with or without value if i create an asset either from scratch or with reference .
I did check with u201CDefine Screen Layout for Asset Master Datau201D. & u201CSpecify Chart-of-Dep.-Dependent Screen Layout/Acct Assignmentu201D
Still not able to change the field of business area in the asset master .
Is there any other config setting needed to be changed , please let me know.
Thanks & regards
sumanDear,
Suman.
Please follow the path and make the changes :-
SPRO ---> Financial Accounting New ---> Asset Accounting -
> Master Data -
> Screen Layout -
> Define Screen Layout for Master Data.
Select your respective Screen Layout. Go to Time Dependent Tab Double Click on Field Group Rules.
Select MnNo & Sbno. And save. And then run AS02. I hope this solve your issue.
Please revert for further clarification.
Regards,
Pankaj Bhalerao. -
When reading a web page, I will right-click on a link and select 'open link in new tab' and most of the time it will open the new page right at the bottom. I then have to scroll up with the mouse or hit the 'home' button on my keyboard to get back to the top of the page. I've already looked at the tab settings in the options menu, and there's nothing there that seems to apply.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox -
Modify code to pull the time dependent master data
I fully under stand the suggestion below for the requirement to add the time dependent attribute comp code
thanks fo rthe help but please tell me if there is a way i can modify the abap code and make the user enter the value for the date on which he want to pull th emaster data for company code or keydate to and from and pull the master data, so how will i proceede should i create the variable on 0doc_date and how to modify the code. please help . i have opened another question with same desc as above to assign points
thanks
soniya
The literal within <..> is supposed to be replaced by the actual field name (as I didn't know the fields). In this case, I am changing your code for costcenter/company-code.
data : wa like /bi0/qcostcenter.
select single * from /bi0/qcostcenter into wa
where costcenter = comm_structure-costcenter
and objvers = 'A'
and datefrom le comm_structure-<keydatefield>
and dateto ge comm_structure-<keydatefield>.
if sy-subrc = 0.
result = wa-comp_code.
endif.
abort = 0.
You can use this code for update rule of company_code. You have to replace '<keydatefield>' with a field name that contains the date on which the company is to be derived. If there is a date in your comm_structure (eg aedat) which you can use, you can specify that field in place of this literal (instead of comm_structure-<keydatefld> use comm_structure-aedat). If you have no such field, and you wish to use current date for getting the company code from time-dependent master data, you can use sy-datum (ie replace comm_strucutre-<keydatefld> with sy-datum).
And it should work.
The 'master data attribute' option is one of the options when you create update rule (one of the radio button options).That the code is doing anyway.
If your txn data in the cube doesn't have a date, how does it know it is Feb data, or, it is March data?
If it has a date or month field, you should modify and use this code to update the company based on that date instead of system date.
Other than that minor variation, it is already doing what you look for. -
Regarding the Time dependent master data error
Hi Masters,
I've loaded the time dependent master data from flat file only two fields. When I checked that corresponding characteristics in maintain master data, that contains by default from date 01.01.2007and to date 31.12.9999 this date also. Could you please help me to rectify this error.
Thanks in advance
Raja.SHi Antonino La Vela
I have 2 Project Manger and in different duration for different project.
Following datas are my data in Excel sheet.
PM Name To date From Date Costcenter
Ragunath 01.09.2007 01.06.2006 Project name1
Ramana mani 01.02.2008 02.09.2007 Project name2
while loading above data, I'm getting following data in maintain master data
PM name To Date From Date Costcenter
31.12.9999 01.01.1000
Ragunath 31.05.2007 01.01.1000
Ragunath 01.09.2007 01.06.2007 Project Name1
Ragunath 31.12.9999 02.09.2007
Ramana mani 01.09.2007 01.01.1000
Raman mani 01.02.2008 02.09.2007 Project Name2
Raman mani 31.12.9999 02.02.2008
Could you please help me, how this unnecessary datas are loaded by default?
Thanks in Advance
Raja.S -
Greetings!
I need assistance from you wonderful mac techies out there.
Currently I am having a big issue to access a website's "SHOP section(tab)" within this website.
While in the process of paying for my items in my cart, I received a website message saying something
To the affect that this website is being updated. Your items in your cart will be in your cart.
Then the website's screen kicked me out the door.
A few days later I accessed the main page of this website with no problem.
I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
I click and maneuver from on one tab to another from the main page within this website with no issues.
When I click on the "SHOP section(tab)" within this website to complete my purchase.
Part of this website an error occurs on this "SHOP tab".
"Safari can't connect to the server".
Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
I click on the reload from the view of the toolbar and I can't access this website's "Shop section(tab) at all.
I e-mailed the webmaster of this website a few times, but no response.
In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
Now I am at my wits end as I really need to complete my purchase from this website.
I cannot purchase these items from other websites. Only this website. Good Grief( :
I am at my wits end as I really need to complete my purchase with this particular website.
So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
I can't figure this out (:
No issues with:
* My modem and ethernet connections
* My network provider connection
* Cables and wires
* Power strip unit to protect my electronics.
* Utility bill is up to date.
I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
Lion: OS X
Version 10.8.2
Processor: 2.7 GHz Intel Core i5
Memory: 8 GB 1600 MHz DDR3
I use Safari: Version 6.0.2 (8536.26.17)
I use the Mail app that shows a postage stamp with the picture of an eagle
It is the Version 6.2 (1499)
I really need help access the "Shop section(tab)" of the website to complete my purchase.
What is the next step to fix my dilemma?
Thank-you all in advance with your expertise, and patience.
Very Much Appreciated.
With Kindest RegardsYou can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I am working on two macbooks and an imac. I upgraded all the software last weekend and am now running all three computers on Lion. Over the last week, about 50% of the time when I click the mouse (whether it be the "pad" mouse on the macbooks or the standard mouse on my imac) it acts as thought I've right-clicked. How do I stop this insanity?! I want my old no-right-click mouses back!
Thank you for any guidance!
JenniferTry this,
Go to to the Trackpad System Preference and look at the Point and Click tab.
Uncheck the box that says "Tap to Click"
I found my track pad to be way too sensitive and I was finding myself in web pages I did not choose to go to. Unchecking that box will make it so you have to press the track pad to make it click something as opposed to just tapping it. It is more effort but also less sensitive to random taps.
Jay -
SC's Dependencies are missing in the check-In tab of the transport Studio
In SLD, the SC is created with the following dependencies:
(1) DI Build Tool 7.0
(2) SAP J2EE Engine 7.0
(3) SAP JAVA TECH SERVICES 7.0
Then, in NWDS, in the Development Configuration Window, the SC which is created is loaded.
Within the created SC, the DC is created. but the DC is created with some errors saying " The dependency files are not linked".
XML of CBS Build Compartment:
Software Component SC : SAP_JTECHS
SC State : ( 3 gray colored circle )
<dependencies>
</dependencies>
<build-variants>
<build-variant name="default" required-for-activation="yes">
<variant-mappings>
</variant-mappings>
</build-variant>
</build-variants>
Please note the dependencies tag are empty.
I also done "update CMS". but still it remains the same. please explain me my mistake.
D:\usr\sap\JTrans\CMS\inbox folder is empty.
I could able to see all the buttons in the Check-In tab of the transport Studio. But the Check-In button is disabled and the table of Check-In tab is empty.
The required Track is selected in the left-hand side of the Transport Studio Window.
Please guide me.Hi Sathya,
First you need to put SCA files
(1) DI Build Tool 7.0
(2) SAP J2EE Engine 7.0
(3) SAP JAVA TECH SERVICES 7.0
In your D:\usr\sap\JTrans\CMS\inbox in the server.
then you can create TRack and add SC dependancy to track...after that it will appear in the check-in tab.
Hope it helps,
Regards,
arun -
How do I add new fields to the 'Customer Data' tab under the BP
I had previously found a screen in the SAP GUI to add fields so that they would show up on the 'Custmer Data' tab under the Business Partner screen. I thought it had been somewhere in se80 but I cannot find it again. Does anyone know where this is? Thank you!
Hi Mark,
You can do this using transaction EEWB. This is the Easy Enhancement Workbench.
within this, you can use the wizard which will guide you through a step by step process to add the fields you need. Basically, there are 2 ways to add new fields :
1. Add new fields - this adds fields to table BUT000, but places the fields on a new tab called 'Customer Data'
2. Add new attributes table - creates a new table and links it to BUT000 using the partner number.
Hope this helps you.
Cheers,
Rishu. -
When ever I customize the toolbar, the open new tab sign that is the + sign near the lastly opened tab in the tab bar disappears and it remains so even after restarting Firefox. This happens only after updating to the new version 4.0.1 it never happened in the older versions 3.x.xx- checked it thrice. Thought it could be a bug and i didn't know where to report also don't have time and patience to search for the appropriate page so i'm reporting here for improving my favorite browser.
You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible to the left of it.<br />
*New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/ -
I want it to ask the master password all the time when I open the site which my password is saved
I want it to ask the master password all the time when I open the site which my password is saved.
This is not the problem, may be a feature.Your question is quite vague, but if I am right then, go to Tools> Options and then "Security" Tab then select "Saved Passwords" and you should find all the passwords you have saved for websites so far. If its an issue with the master passwords that is for Firefox itself, then the Master Passwords option is right above this. Have a look at the image below.
-
when i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?
Under the summary tab in iTunes make sure you have Automatically Back Up This computer. If you have iCloud selected it won't back up when syncing.
Maybe you are looking for
-
How can you get apps back after you restore an iPod?
Alright so basically I was on my iPod using an app when all the sudden my screen goes black and it wouldnt turn back on, when I inverted colours it went white so my iPod was on, just not responding. I had to restore my iPod and I have all my music ba
-
How to calculate storage space for archive log files and database backups?
Hi all, I have a 1.8 terabyte Oracle 9i database and need to plan for how much additional disk space I will need to perform nightly backups and for archivelog files. Is there a script or formula available that can help me estimate how much required d
-
Improvement to Skype Directory.
In an older version of Skype, there was an actual directory. In order to add someone to your contact list, you had to know their name or visit the Skype website and browse the directory until you found them. However, in a person's profile setttings,
-
What are the benefits to publishing to .mac vs. another host like Godaddy?
It seems that .mac is much slower in viewing my web pages vs. Godaddy. I understand that I have to upload manually via FTP with Godaddy and the additional cost of paying for another host, but are there any benefits or functionality with iWeb that I w
-
Turning off Change pointer HRMD_A
We currently have the change pointer HRMD_A turned on and it's creating the IDOCs just fine. Now, we want to turn off the change pointer, which I did in tcode BD61 and unchecked the message type HRMD_A in tcode BD50. But, the IDOCs are still getting