Enhancement Implementation - Operation not supported by the selected object

Hi,
I have created an Enhancement Implementation (EI) of Enhancement Spot BADI_ACC_DOCUMENT via transaction SE19. When activating the EI, the following message occurs and the EI is not activated:
Operation not supported by the selected object
Message no. SEU_MANAGER061
I have searched the forum and service marketplace for the message, but I still have no resolution of the problem. Any help is greatly appreciated.
Thank you.

It turned out to be a basis problem. Looking into transaction SM21 showed that the database was full.

Similar Messages

Paper Size Error: The specified custom paper size is not supported in the selected tray.

This happens when I try to print a web page using firefox. When I copy and paste the same yrl into safari and select that page in Safari it prints without a problem.

Hello Bhumika2 ,
Welcome to the HP Forums.
I see that you are having some printing issues with paper sizes.
Seeing that the operating system is 10.5, the printer is not supported on this version. I suggest that you check for apple updates and see if anything is available.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

The specified custom paper size is not supported in the selected tray

When attempting to print from Pages 5.5.3 to the above printer I get this error, I am able to print from other applications, this occurred when Apple upgraded Pages. Thank You

Welcome to the HP Community , I noticed your post about the printing issues you are facing, and wanted to reach out to you! Please try the steps I listed for you below in the order I wrote them in and try printing again! Good luck Reset the printing systemRepair disk permissionsRestart the MacClick this link, download the full driver: HP Officejet Pro Full Feature Software and DriverIn addition, download this driver: HP Printer Drivers v3.0 for OS XTest print from Text Edit and other applications. Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

DBMS_SCHEDULER - ORA-02064: distributed operation not supported

I am getting this error:
ORA-02064: distributed operation not supported
using the DBMS_SCHEDULER package in Database 10g. The code works successfully in PL/SQL DEVELOPER inside the database but when I try to run the code through PSP pages on the web, I get this error. The erro happens when this method is executed in DBMS_SCHEDULER:
DBMS_SCHEDULER.CREATE_PROGRAM(
PROGRAM_NAME => 'ROADS_FTP',
PROGRAM_TYPE => 'STORED_PROCEDURE',
PROGRAM_ACTION => 'pkg_report_t3.transfer_report',
NUMBER_OF_ARGUMENTS => 0,
ENABLED => FALSE,
COMMENTS => 'Highway Driving Conditions FTP Program');
Do anybody know how I can get this to work in a browser? Or why I am getting this error?
Thanks!

Agowda wrote:
hi
I'm just passing the values to the procedure .
Procedure is stored on a remote machine
procedure has a ddlAnd the DDL will implicitly issue a commit before and after that DDL statement (as all DDL statements do). So you ARE doing a commit in a romote procedure call, hence why you're getting the error.
If you want to remotely create a user you need to issue the DDL in the manner I described.

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

HT201342 I have just opened an icloud email address and am unable to open ANY of the messages in my INBOX. I keep getting the message, "Cannot open this item. This operation is not supported until the entire message is downloaded. Download the message and

I have just opened a new icloud email address and am unable to open ANY of the messages in my INBOX. For each item I get the message "Cannot open this item. This operation is NOT supported until the entire message is downloaded. Download the message and try again". I now have no clue what I need to do to open these items. Help please.

What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT

Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
-- The sound is not muted and the volume is set to full.
-- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
-- I can't find any related messages in the Event Viewer.
-- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
-- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
- I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
- I get the error message "format not supported by the device" when I try to change my Default Format
-- Note that unlike others who have similar problems, I'm not joined to a domain
I've tried
* rebooting
* uninstalling and reinstalling the driver for the sound card
* "disable all enhancements" in the sound control panel
(http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
* looking in the registry for some registry key (not found)
(http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
Computer details
Dell XPS M1530
Vista Ultimate x64 SP1 with current updates
SigmaTel driver version 6.10.0.5866
**Update**
I followed the following steps:
    * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
    * Reboot the machine
    * Try to play an audio file.
    * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
**Another update**
Still can't read the EVM. logparser 2.2 can't parse it.
Found this thread which interested me but isn't applicable to x64 (I think):
http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
**YAU**
Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

Hi,
Thanks for posting in Microsoft TechNet Windows Vista Forum.
Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
http://support.microsoft.com/kb/930883
2. Make sure that these services are started.
Windows Audio
Multimedia Class Scheduler
Remote Procedure Call
Windows Audio Endpoint Builder
3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
System Restore
==============
1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
2)     Click Restore on the left pane.
3)     Choose Basic Restore.
4)     Follow the wizard and click Next.
5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
6)     We can also browse and choose certain files and folders to restore. Then, click Next.
7)     Then choose the folder to save the recovered files and click Next.
8)     When we see a “Restore is complete!” message, click Finish.
Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
Hope this helps. Thanks.

ORA-02064: distributed operation not supported

Im getting this WARNING when im executing my mapping.
My mapping involves selecting a data from a splitter and updating and inserting two tables respectively. ONe set of data from the splitter will be inserted into 1 table and the other set of output from the splitter is updated into the 2nd table.
This is working fine. But i dont know why im getting this warning.
Is it a very serious thing or can i ignore this?

Hi Vibhuti,
Looking up the desciption for this warning gives me this:
ORA-02064: distributed operation not supported
Cause: One of the following unsupported operations was attempted:
1. array execute of a remote update with a subquery that references a dblink, or
2. an update of a long column with bind variable and an update of a second column with a subquery that both references a dblink and a bind variable, or
3. a commit is issued in a coordinated session from an RPC procedure call with OUT parameters or function call.
Action: simplify remote update statement
I have not encountered this error myself, but my guess would be you are running into scenario 1 with your target tables or source tables in a remote database.
See if running the mapping in row-based mode gets rid of the warning.
Btw, are you sure it's merely a warning and not an error ? I.e. are you targets really updated the way you expect ?
Ragnar

ERROR: Update mode C is not supported by the extraction API - R3 11

Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
Matteo

Hi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi

Xtreme Gamer is "not Supported by the Application" Problem. He

My SoundBlaster XFi Xtreme Gamer has suddenly stopping being detected by my creative software, such as Volume Panel. The drivers are installed, and when I hover my mouse pointer over the volume panel is still shows "SB X-Fi Audo [E000]" which is the sound card, but when I doubled click to open the volume panel it says that "The current selected audio device is not supported by the application. Do you want to select another audio device now?". When I click "Yes", it doesn't show anything on list besides "Windows Default Audio". This happened out of no wheres, with no changes at all to my computer. Volume Panel was working yesterday, but when I woke up today it wasn't. I have no idea what could be causing this, or what caused it... I did update the drivers about a week ago, but it was all working fine since, until today.
I haven't installed or uninstalled anything since it was working properly.
I tried reinstalling drivers and software, and it did not fix anything. I also uninstalled everything including drivers from computer, and used my original installation CD to install everything over again. Every installed fine, but then for some reason it would not install the drivers. Windows was detecting the device, but when I went to install the hardware manually, it would ask for CD to find some files to install... it said this twice, I located the files it needed, and each time it would complete the process it would instantly reboot computer without notice. When the computer was booted up, it would ask then ask again for the Creative CD to install the detected hardware. So I for awhile I could not install the drivers, but for some reason out of no wheres it finally installed when I used the update installation file I downloaded from Creative.com, even though I had tried the same thing a few times, it for some reason installed drivers. But now it is all installed again, my software seems imcomplete and will still not work with the sound device. What seems to be the problem here? Only thing I can think of now is the installation for some reason became corrupted. Only way I can think of fixing it is reformatting my whole computer, but as of right now I don't feel like spending a whole day doing so.
Is there anything that you can think of to fix this problem? I have had the sound card for about a year now. As of right now, I am still using headphones in the soundcard, but it doesn't sound good at all as I can't change anything in software. I also noticed that is no longer has as much installed as it would if I used my original CD. It doesn't have an option to switch sound modes anymore. It also doesn't now have "X-Fi Soundblaster" in "Add/Remove Programs" list. All it has in Add/Remove is "Creative Audo Console".
I uninstalled everything I could and deleted left over files in the Creative directory, so I deleted the whole folder after.
Only other thing I can think of is something in the registery is messed up, and causing the sound card not to be recognized. I also have WinXP SP2.

I spent yet another hour or two trying to fix it, and nothing changed.
I put it into a different PCI slot, and made no difference.
PCI slot doesn't seem to be the problem, I am thinking it is something within the registry itself.
I also put in the CD and there was no option to remove drivers, so I just went ahead and tried overwriting them, but that actually made things worse. My computer kept rebooting over and over when it hit the Windows Boot Up logo, and had to go into safe mode and do a system restore to get it back to normal.
It also keeps asking for the CD when windows loads and it detects the soundcard.
It will ask to locate acouple files, I do what it it says, but just as it is finishing installing the drivers it reboots the system.... when windows is loaded again, it will ask the same thing over, and will keep giving same results.
There isn't anything to completely remove all the creative files and folders including the 00's of registry keys. Maybe Driver Sweeper or Driver Cleaner Pro might help? ill try them, but as of now im not bothering with the soundcard.... ill just reformat. I just hope it ain't the card itself, because I am a month over the one year warranty, and the azzholes from creative said there was nothing they can do about it.
That alone made me want to turn to a different brand next time with better support. Creative has some of the worst support I know of.
They tend to leave people hanging with their defecti've hardware. What I don't get is, that the card still installs the drivers at times, and it will still work but the software won't.
I have been using it this whole time, but seems to freeze up my Guildwars alot.
It still sounds good, way better than Onboard, just not as good as before because there were no options for change mode, or couldn't access the equalizer.
Anyone know of any programs that will completely remove everything for the Xtreme Gamer Creative Software? Including everything in registry.
Also, is it possible that there might be a Windows Service that might have an effect on the problem? I tried enabling a few things, then try rebootin and reinstalling, but didn't seem to help.
But then again, I am not sure which services would cause the problem.
Definately something happened with the last Creative Driver update, only took a week afterwards for something to go wrong.

Read statement is not supported in the BADI?

Hi,
Iam using read statement in the BADI.But iam getting error "READ dbtab" is not supported in the OO Context.How to change the below logic.
BADI Parameters is
NEW_INNNN importing type WPLOG.
My code is :
data: t_INNNN like NEW_INNNN.
data: wa_INNNN like NEW_INNNN.
t_INNNN = NEW_INNNN.
READ TABLE t_INNNN INTO wa_image INDEX c_1.
Please suggest me.
Regards,
Sujan

But in same BADI for other method some body using same logic.But there Read table was supported.
see logic what they implemented.
if sy-ucomm = 'UPD' or sy-ucomm = 'SAVE'.
                t_image = new_image.
                t_image1 = old_image.
                READ TABLE t_image1 INTO wa_image1 INDEX 1.
                IF sy-subrc EQ 0.
                  IF wa_image1-infty = c_1007.
                    READ TABLE t_image INTO wa_image INDEX 1.
                    IF ( wa_image-vdata(2) = c_x0 OR
                       wa_image-vdata(2) = c_x1 ).
                      CLEAR wa_image.
                      LOOP AT t_image INTO wa_image where otype = c_s.
                        v_objid = wa_image-objid.
                        v_begda = wa_image-begda.
                        v_endda = wa_image-endda.
                        v_open = wa_image-vdata(2).
                      ENDLOOP.
But method parameters is different there.
NEW_IMAGE importing type WPLOG_TAB.
here WPLOG_TAB is line type of WPLOG.
I will use the same code instead of new_image iam using NEW_INNNN.
How i will change the above code by using NEW_INNNN.
Kindly help me.I tried all the ways.But iam getting read table not supporte in BADI.
Regards,
Sujan

What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Enhancement Implementation - Operation not supported by the selected object

Similar Messages

Maybe you are looking for