Enhancement Spot: WB2_CC_SETTLEMENT-- BAdi WB2_CC_SETTL_CHANGE_DATA

Hi,
I am implementing Enhancement Spot:WB2_CC_SETTLEMENT with BAdi WB2_CC_SETTL_CHANGE_DATA and class Interface IF_WB2_CC_SETTL_CHANGE_DATA.
Interface IF_WB2_CC_SETTL_CHANGE_DATA have changing parameter is CR_BVB_TAB_DATA and defined as DATA.Structure of CR_BVB_TAB_DATA is available at runtime.
Requirement is to access dynamic data of table CR_BVB_TAB_DATA fields WBELN, KNUMV and update field value of KAWRT.
BAdi will be called in Vendor Contract Settlement ( transaction WB2R_SV ).
I could not find trace of call badi of WB2_CC_SETTL_CHANGE_DATA in program RWB2R_VENDOR_SETTLEMENT.
Any information where this BAdi is called from program RWB2R_VENDOR_SETTLEMENT?
Please suggest solution.
Thanks,
Somi Reddy Satti

Hi Vikram,
Thanks for prompt reply.
The above transactions are belongs to Vendor Contract Settlements and under package WB2_REBATES.The BAdi's are called through classes CL_WB2_REBATE_SETTLEMENT,CL_WB2_REBATE_SETTLEMENT_1 in program RWB2R_VENDOR_SETTLEMENT.
Enhancement Spot: WB2_CC_SETTLEMENT have following BAdi's
WB2_CC_CHANGE_SPLIT_PART_SETTL - Change Split for Partial Settlement Dates active
WB2_CC_REV_ACCR_ALLOWED_CHECK - Check if reversal of accruals is allowed
WB2_CC_SETTL_AFTER_CREATE      - Save own data after settlement document creation
WB2_CC_SETTL_ALLOWED_CHECK     - Check if settlement is allowed
WB2_CC_SETTL_CHANGE_BVB_DATA   - Change Business Volume Base for Settlement
WB2_CC_SETTL_CHANGE_DATA       - Change Data before Data Transfer
WB2_CC_SETTL_CHANGE_FINALLY    - Change Data before Settlement Document Creation
WB2_CC_SETTL_CHANGE_HEAD_DATA - Change Head Data
WB2_CC_SETTL_CHANGE_ITEM_DATA - Change Item Data
WB2_CC_SETTL_SIGN_ADJUSTMENT   - Adjust Signs in Business Volume Data
Thanks,
Somi Reddy Satti

Similar Messages

Enhancement Spot BBP_ENHANCEMENT_SPOT, BADI BBP_ALERTING

Hi Guys,
BADI BBP_ALERTING is single use badi of Enhancement Spot BBP_ENHANCEMENT_SPOT.
Is there any way i can have multiple implementation of this BADI and add few parameters to control the specific implementation.
The above BADI is a SRM BADI.
Thanks.

Hi Vikram,
Thanks for prompt reply.
The above transactions are belongs to Vendor Contract Settlements and under package WB2_REBATES.The BAdi's are called through classes CL_WB2_REBATE_SETTLEMENT,CL_WB2_REBATE_SETTLEMENT_1 in program RWB2R_VENDOR_SETTLEMENT.
Enhancement Spot: WB2_CC_SETTLEMENT have following BAdi's
WB2_CC_CHANGE_SPLIT_PART_SETTL - Change Split for Partial Settlement Dates active
WB2_CC_REV_ACCR_ALLOWED_CHECK - Check if reversal of accruals is allowed
WB2_CC_SETTL_AFTER_CREATE      - Save own data after settlement document creation
WB2_CC_SETTL_ALLOWED_CHECK     - Check if settlement is allowed
WB2_CC_SETTL_CHANGE_BVB_DATA   - Change Business Volume Base for Settlement
WB2_CC_SETTL_CHANGE_DATA       - Change Data before Data Transfer
WB2_CC_SETTL_CHANGE_FINALLY    - Change Data before Settlement Document Creation
WB2_CC_SETTL_CHANGE_HEAD_DATA - Change Head Data
WB2_CC_SETTL_CHANGE_ITEM_DATA - Change Item Data
WB2_CC_SETTL_SIGN_ADJUSTMENT   - Adjust Signs in Business Volume Data
Thanks,
Somi Reddy Satti

Enhancement Spot in Badi implementation

Hello All,
Can smb explain what is "Enhancement Spot" in Badi definition?(trn code SE18)
What the difference between classic Badi and new Badi?
Where can I find some documentation on this?
Rika

Rika
I remember that the new BADI's are based upon the SAP's latest technology on Enhacement Framework.
Please refer the Enhacement Framework [here|http://help.sap.com/saphelp_nw70/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm].
Thanks
Allot points if this helps!

Enhancement Spot, Custom Badi

Hi Experts,
can any solve my problem.
What is Enhancement Spot. What is the use of this.
In ECC 6.0 I am unable to create a custom BADI. ( I know to create this in ECC5.0 ).
Can any One give detail procedure to create Custom BADI
and to Implement this in an executable program in ECC 6.0.
Thanks & Regards,
Kumar.

Hi
Please go through the below links to learn about the SAP new enhancement frame which explains you all about enhancement spot, enhancement points , enhancement option etc.
SDN links.
https://www.sdn.sap.com/irj/sdn/nw-development?rid=/webcontent/uuid/2342e1f3-0b01-0010-a186-fdd404884050
help.sap links
http://help.sap.com/saphelp_nw04s/helpdata/en/91/f1e540f8648431e10000000a1550b0/frameset.htm
Wiki
https://wiki.sdn.sap.com/wiki/display/ABAP/ThenewEnhancementFrameworkandthenewkernel-basedBAdI
In WIKI read the weblog series.
Edited by: Surender Yadav on Sep 19, 2008 1:17 PM

Enhancement Spot Vs BADI

Hello SDNites,
The question I am asking is a simple conceptual question but am not able to get the answer of the same. Please help me in this regard.
1. In ECC 6.0 can we create custom BADI definition. I have tried the same and it is not allowing me and it is saying creation operation only possible for enhancement spots. Why is that so?
2. Enhancement spot falls under explicit enhancement of enhancement framework. Correct me if ?I am wrong?
3. How can we find Enhancement spot for a particular transaction.
Regards,
Abhi

Hi,
The idea behind the Enhancement spot is to organize all the enhancements in a specific place called enhancement spots, earlier if you implement a BADI you can't track it using object navigatore but now you can track all the enhacements which you made in the system using se80->Tab Enhancement Info System.
2. Yes.
3. You can't find the spot for a transaction, but you can find the Enhancement spots by providing application component and package name in se18 transaction.
Regards,
Narayan

Enhancement spot PT_ABS_REQ - BADi not being called

Hi,
I wondered if anyone can help. I need to change colours in the team calendar viewable in MSS.
In SPRO under Personnel Management>employee self service>service specific settings>working time>team calendar>BADi.controlprocessing of leave requests - I have created a BADi that I have called "ZPT_ABS_REQ".
In SE18 under the enhancement spot ZPT_ABS_REQ - (enhancement implementation tab) I can see my BADI and if i double click on the enhancement implementation I get taken to the enhancement implementation ZPT_ABS_REQ and it lists the BADI implementation as being ZBADI_PT_ABS_REQ.
So in SE24 editting ZBADI_PT_ABS_REQ, I have some code to the method IF_EX_PT_ABS_REQ~TEAM_CALE_ENRICHMENT - the code is very simple and just inserts a record into a test table (I can run the badi separately and a record gets created). I also copied/pasted the code in this method from the standard BADi (CL_PT_ARQ_REQ also listed in the enhancement implementation tab) just to see what happens.
What i had hoped is that when in MSS I view/process the Team Calendar I would get a record in my table but I dont. Ultimately I want to change legends in one of the other methods but this is for later once i can be sure the BADi is being executed.
Everything is active. Any ideas anyone? I would also welcome ideas on how this can be debugged to see if the BAdi is actually being called (which clearly it is not!) - incidently i'm not an java/mss developer.
many thanks Neil

Hello,
I have implemented this BADI & can see my implementation active in IMG.
But when executing leave request from ESS i am getting error saying An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE.
Can anybody tell how to solve this?
Also how to set calendor color & legend color?
Edited by: Sachin Thigale on Aug 19, 2010 3:34 PM
Edited by: Sachin Thigale on Sep 4, 2010 10:48 PM

Having problem implementing enhancement spot 'OI0_OGSD_XM06'

Hi,
I have an enhancement spot using BADI 'OI0_OGSD_XM06'. It has property 'Can only be implemented SAP-internally' checked
under usability options. I want to know if this enhancement spot could be implemented. If yes, how?
Thanks in advance!

I am facing the same issue. However I learnt that we might need to use Adjusting Tool from Object Navigator/SE80 on the implementation before transporting.

Vi01-Create shipment cost-Enhancement spot

Hi Guru,
I have one requirement for that i need help. In transaction vi01 je shipment cost, i want to change the value of Tax Code,
for that i need help from you people, please tell me any one know about this. Is there Enhancement spot or Badi which is help full for my requirement.
Thank You.

Hi,
you can inser enhacement point in any place of ABAP code if it is-
-begin subroutine
-end of subroutine
-begin of function
-end of function
-data declaration
-begin of method
-end of method
just find code through program is running and right moment I am sure you will one of these place to be insert.
-just press icon with inheritance and it will show you place to insert code
Good luck

Enhancement spot for FB60 to edit withholding tax

Hi,
I'm looking for an enhancement spot or badi, exit, in order to check withholding taxes in FB60.
Thinks

Hi Vincent:
Did you used it just to read the table or even to modify?

Need Enhancement spot or user exit for ME31L

Hi Experts,
I need an enhancement point(ExIt/BADI) to change ir_ind, GR_basedir and ERS flags based on the value of net_price and est_price flag(item level) in the transaction ME31L(Create scheduling agreement).
need solution urgently
TQ
Phalani M

Hi
Use
ME_PROCESS_OUT - This is an Enhancement spot for BAdi ME_PROCESS_OUT
Processing of Header Data
With this method, you can change the header data of your outline agreements and check it for correctness.
The import parameter IM_HEADER containing the header data of your outline agreement is available.
The interface reference is of the type IF_PURCHASE_OUT_HEADER. You can use all the methods defined there. To get the current header data of the document, use the GET_DATA method.
Error messages can be issued directly. The business logic processes these messages, writes them to a log, and sets the document to invalid.
The import parameter IM_COUNT is currently not used.
Thanks & Regards
Kishore

BADI or Enhancement Spot while assigning BP to a Org Unit

Hi,
I have a requirement of changing the BP address while assigning the BP to a Org Unit in PPOMA_CRM. Is there any BADI or Enhancement Spot which can be used for this purpose.
Thanks,
Ravi G

Hi Ravi
Regarding this thread I want a help from your side if you can help me please.
I have to put some validation for the assigned employee and the position under which the employee is beeing assigned.
Is there any badi or Enhancement spot that can resolve my problem.
the validation will be done as soon as we select the employee that will be assigned to the position and press the ENTER.
It is done before SAVE.
Best Regards
Saurabh

Badi created throught Enhancement Spot,but it is not registered in SXS_ATTR

Hi All,
Can anyone please tell me regarding why, When BADI created through Enhancement Spot, it is not registration in the SXS_ATTR table.
During creation of BADI, Through BADI Definition, the interface and Class is generated by the system itself. Where when I create Badi , by Enhancement Spot I need to enter manually both the interface and Class name.
BADI Definition: Z_CUSTOM_BADI
Implementation name : Z_CUSTOM_BADI_1
I hv given a class name as: ZCL_IM_CUSTOM_BADI_1
But during the debugging, it showing the class name as: ZCL_IM_CUSTOM_BADI
Thanks in advance.
Rgds.
Shaik

Hi
I think the request is good for deleting the enhancement, the problem could be if there are other objects there, but if the only object is the enhancement I think It should be ok
@Max, inside the task when i double clicked the enhancement, its throwing an error the cant be read.
That's normal if you have delete it
Max

Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)

Hi all,
i am facing problem finding enhancement when creation of sales order of Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)
For refferenece:
When going to t.code VA03, select one item and go to extras in the menu bar and select costing then you find some amounts calculation i.e valuation price automatically.
So when creation of sales order i am giving material and that material price automatically takes from material master and creating sales order.
My customer requirement is to get the valuation price of the input material from Z-table during the sales order cost estimate.
This Z-table contains the material code, plant , grade of the material.
Ex:
Material         Plant   Grade Price
A                1000    XYZ     25000
A                1000    PQR     35000
A                1000    BCD     45000
Suppose it depends on sales document type and which grade price i have to take.
So first of all i am unable to find enhancement where to change this code to get change the valuation price.
Does anybody have any idea , is there any user exit/BADI/enhancement for this.
So please help me in this issue.
Thanks & Regards,
lokeshgoud

pls allow me to post the questions

Badi implementation in ECC 6 version using Enhancement spot

Hi,
I've to create an implementation for an already existing BADI in ECC 6.0 version.The interface method of the badi is getting called in main program in a standard include.Is it possible to create that using New badi Enhancement spot option in se19? If so where should i create the enhancement point because when i'm trying to create implementation i'm getting the message Enhancement point zbadi_le_shipment does not exist .
Thanks in advance
poornima

Hi,
First u need to implement the BADI badi_le_shipment
Implementing Business Add-Ins (BADI)
The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called
Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods
as a function module with the same import and export parameters and follow the simple instructions below.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e.badi_le_shipment and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Zbadi_le_shipment
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. badi_le_shipment ) and double click on the method name.Under this AT_SAVE is the method put break point.
8. When changes have been made activate the implementation
YOu can go through these links...
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
Regards
Kiran Sure

Enhancement Spot & BADI

Hi All,
I know we can create a BADI in ECC 6.0 using the Enhancement Sopts. Then why do we need a BADI create option also in SE18, when Enhancement Spots take care of BADI's already?
Please provide any inputs on the same.
Thanks & Regards,
Binu

Hi,
check below link
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=howtoimplement+badi&cat=sdn_all
Regards,
Madhu

Enhancement Spot: WB2_CC_SETTLEMENT-- BAdi WB2_CC_SETTL_CHANGE_DATA

Similar Messages

Maybe you are looking for